Show not flagged as "first run" in listings, causing dvr headaches
As of 21 April 2014, "The Boondocks" episode that airs on Cartoon HD at 10:30pm EDT each Monday is a first run. However, the listings on my FiOS guide don't show it as such, so if I have my dvr set to record first run only, it doesn't record ANYTHING. If I eliminate the first run requirement, it schedules EVERY airing of the show to record. Please fix this. Thank you.
One area I saw a major improvement (about 2.5x faster) was in the processing of Magic Bullet effects, specifically Colorista and Looks.
If you use those effects at all (or any others that may be processed on the GPU), the extra CUDA cores really do make a significant difference.
Similar Messages
-
Incompatible extensions were not disabled at first-run
After having success running FF4b6 on one windows XP SP3 laptop, I decided to install it on my other XP SP3 laptop. The install on laptop #2 went fine, but when b6 loaded, I noticed that extensions I knew from installing on laptop #1 were incompatible with the beta (i.e. Personas changer, Echofon) were not disabled on first-run. Instead, they seem to now be zombie extensions, with their icons hanging out in my statusbar and menus, but unable to function. Clicking on the zombie icons gets empty lists or no reaction, rather than the usual options. I am unable to manually disable the zombie extensions because the extension manager shows empty space where it should show a list of the extensions (i.e. it loads the sidebar of "find add-ons, add-ons, plugins, etc, but the inner frame that would list the contents of any of those tabs is blank). A restart of the browser didn't help.
Deleting the extensions.* files didn't help, but I think safe mode helped me get a handle on things. (I also forgot to mention the first time around that I installed the beta on a system that already had 3.x installed. Not sure if that matters.)
Here's what I've done based on/after your reply:
1. Closed beta and made sure 3.x wasn't open
2. Deleted extensions.* files
3. Opened beta. Observed that same problems persisted
4. Uninstalled beta
5. Opened 3.x. Observed that extensions were all working perfectly in that install.
6. Reinstalled beta.
7. Launched beta. At first run check for extension updates, before the browser window launched, progress bar got approximately 3/4 of the way through, then popped up an error dialog box that said, "The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly."
8. Observed in launched beta that same problems persisted.
9. Closed beta. Launched beta in safe mode.
10. Checked add-ons manager. Displays properly in safe mode. Disabled all add-ons that said they were incompatible with beta6.
11. Restarted beta. I now have a functional add-ons manager! Woohoo!
Thanks for your help! -
Distinguishing First Run and Rerun for DVR Recording
If you want to record a series, not just a single show, the only choice you have is to record BOTH First-Run episodes AND Reruns. I note that Direct TV users and TiVo users have a choice when recording a series by selecting First Run Only or First Run and Repeats. Without this discriminate, shows that repeat habitually throughout the day and week are recorded. This is a major inconvenience if your recording are almost exclusively series TV shows. It becomes very inconvenient for series broadcast on HBO, where throught the week multiple series and reruns--for example Boardwalk Empire--are all playing in a single week. The lack of this feature--that other services already have--is a major shortcoming.
Something odd there. Which DVR model?
Should be press DVR button scrool to manage series recordings, press right, scroll to show, press ok, (options including change priority, modify series and cancel series. Modify Series. press ok. Options on that include episodes (first run only/first run and repeats). Scroll to episodes, press enter, change as desired, press ok, push right to save, press ok. close menus, may have to do repeated exits.
You may also want to find the dvr settings to set your default options for creating series recordings. menu/settings/system/dvr/default series options -
Flash does not register on first run
Hello,
after flash 9 is installed, I tried running a flash file on
our web site. The first time one clicks on the link to the flash
file, it brings up a new browser window, but nothing happens. If
one clicks on the refresh button, the flash file begins to run. Any
subsequent visits to this or any flash file and the flash file runs
correctly (ie, the user does not have to click the refresh button).
Is there a setting that I am missing so that this flash file will
run correctly the first time?
Most of you are thinking, "Big deal, it works... move on."
And I agree. However we have the typical users who will call the
helpdesk when the flash files does not run correctly. Our helpdesk
fields enough ID10T calls as it is. I would like to minimize those
calls as much as possible.
thanks in advance for any help, advice or suggestions.url?
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
ffriedman wrote:
> Hello,
>
> after flash 9 is installed, I tried running a flash file
on our web site. The
> first time one clicks on the link to the flash file, it
brings up a new browser
> window, but nothing happens. If one clicks on the
refresh button, the flash
> file begins to run. Any subsequent visits to this or any
flash file and the
> flash file runs correctly (ie, the user does not have to
click the refresh
> button). Is there a setting that I am missing so that
this flash file will run
> correctly the first time?
>
> Most of you are thinking, "Big deal, it works... move
on." And I agree.
> However we have the typical users who will call the
helpdesk when the flash
> files does not run correctly. Our helpdesk fields enough
ID10T calls as it is.
> I would like to minimize those calls as much as
possible.
>
> thanks in advance for any help, advice or suggestions.
> -
Deatail Region in OAF Table - Show not responding for first time click
I have added a detail region to my OAF results table. A link for 'show' appears for each record of my results table. When I click Show for a purticular record - the page refreshes, The control is going to Process Form Request but nothing is happening.
If I click the 'Show' for the second time for a purticular record ,Show functionality works and I could see my detail section under that record and the Hide functionality works fine too. Please advise if that is how it is suppose to behave or if we can change any property of the table to make it work for the firest time.
Thanks, PradeepPathi,
Please try to have the WhereClause in the VO query as part of static definition itself. So you would only need to bind the parameter and execute the Query.
Try and let me know if that helped.
Thanks
Sumit -
Video not working on the first run of Android app
I couldn't find any results regarding this problem. Maybe I'm just using wrong keywords as it is difficult to explain.
Has anyone else encountered that video is not working on the first run of Android app? By first run I mean directly after installing. I'm using NetConnection, NetStream, Video objects and GPU renderMode. By working I mean it's not showing and can't hear the audio. I haven't yet debugged deeper so I don't know if the problem is actually related to the code loading the video.
I've encountered the following issues, which may or may not be related, regarding the the first run and Video object:
- The first run takes about 20 seconds to start. After that, the start is pretty much instant. If you clear app's cache, it again takes the 20 seconds to launch. The video works after clearing app's cache.
- When creating the first Video object, the app flashes screen to black for a few frames. This is why I create a dummy Video object in the beginning.
I use AIR 13, going to upgrade to 14, but I'm quite sure this problem and the issues have been for a while.I should add that we're using flv, not mp4. And they're progressively downloaded, not local.
-
As title says.
Both Disable Office First Run on application boot and
Disable Office First Run on application boot are enabled via GPO, confirmed via gpresult /h. But then when I open the application the "Welcome to your new Office" screen shows.
I have also set the following:
Automatically receive small updates to improve reliability"
Enable Customer Experience Improvement Program"
Enable Customer Experience Improvement Program
Send Office Feedback
All to disabled.
But still on first running say Word 2013 I get the "Welcome" screen...
So what am I missing?I also have the setting 'Disable the Office Start screen for all Office applications' enabled.
This does not stop the Welcome Message.
Welcome screen:
http://blogs.technet.com/b/odsupport/archive/2012/11/14/how-to-manage-the-first-run-screens-that-appear-when-microsoft-office-2013-applications-are-first-launched.aspx
http://technet.microsoft.com/en-us/library/cc179123(v=office.15).aspx
-=-=-
Start screen:
http://www.maketecheasier.com/disable-start-screen-in-microsoft-office-2013/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Identify TV shows as "first" run or "Re"Runs
How do I identify TV shows as a first run or a rerun? Just switched from Direct TV to Verizon Fios TV. Direct TV identified the first time a TV show ran under "info" - apparently Verizon Fios does not. Any suggestions?
Thank you.
JHJJust another viewer who wishes the Guide would be more accurrate. A lot of the time, they don't have any information, just a general
program description, e.g. Leno, Dateline, etc.
My very favorite was before a presidential debate between Obama and McCain. For days, the Guide info was "Final presidential debate
between Bush and Kerry". I thought maybe they were going to re-run the '04 debate!
This just exemplified how awful the Guide is, and how nobody bothers to even read it (wherever it comes from), because I cannot believe
anyone could be that badly uninformed. -
I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?command-option-esc keys and force quit Mail. Then relaunch.
-
I am a system administrator and need a way to set a global preference to not open the Whats New and first run pages. I found the browser.startup.homepage_override.mstone preference in the user profile but want to be able to set this globally.
Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
* http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
*http://kb.mozillazine.org/browser.startup.homepage_override.mstone -
Aperture 3.2.4 flagged pics in Project not showing in Flagged view
I have used Aperture 3.2.4 flagging many times as a method to create batches of pics for emailing. Tonight I have flagged 6 pics. I can see the flag on each pic, deselect and reselect each flag, but in the "Flagged" view I am not seeing any pictures. In browser, in the list view, the pictures are showing as flagged.
Any ideas? Thanks, BruceIt is possible that you have a filter set on the flagged album. When the flagged album is selected with browser view on look in the upper right hand corner of the screen the window should say unrated or better.
If that is not the case what happens when you hold the mouse over the flagged album in the Library pane of the Inspector. Does it report any versions in the album?
Finally take a look at this User Tip Images not appearing in browser, search filter is cleared The same problem this tip addresses with the Photos section of the Library also applies to the Flagged album. See if this doesn;t clear it up if the above fail.
And of course the steps shown in Aperture 3: Troubleshooting Basics will also be helpful.
Post back if you still have problems. -
AFAR test run showing the values but not posting in Real run.
Hi Friends,
i have an issue with AFAR recalculating the depreclation. The details are as below;
1. Asset value date is 15.07.2010. but ordinary dep. start date was set as 01.01.2010 manually by the user.
2. The Period control method 11, the dep. is calculated for entire year for acquisition.
3. we have already calculated depreciation from period 12 2010 to period 04, 2011.
4. Now, we have changed ordinary depreciation start date for 5 asset records from 01.01.2010 to 15.07.2010.
5. Therefore, we recalculated AFAR for these assets for 2010 and test run is showing the values for these 5 asset. The same was expected by the business.
6. When we execute the real run, it is not posting and no change in asset explorer for period 12, 2010 or in current period. No error message is available in spool / job log.
We have opened FI periods as well.
My question is that why the system calculating the values in test run and if it is calculated in test run, why it is not posting in update run?
As per the period control method, the depreciation should not recalculated for half year even we change the ordinary dep,start date from 1st Jan to 15th July.
I request you to clarify my doubt and help me to understand the error which is stoping the values in update run of AFAR.
Best Regards,
PadmajaHi,
Sorry...it is not worked out. Alternatively, i tried the shift factor with variable depreciation and i achieved the values which appeared in AFAR test run.
Thanks for the help.
Regards,
Padmaja
Edited by: PadmajaCH on May 19, 2011 3:26 PM -
'flagged' to 'filters off' not working. still showing only flagged images.
Recent issue:
when I try to switch from 'flagged' to 'filters off', it is not working. The app is still showing only flagged images. I can't access my unflagged images in the gallery at all.
I have to exit the app completely to correct issue.
I'm using the most recent update of lightroom 5.5 from the CC.A couple of things to try:
1. Exit LR and then delete the LR 5 preferences file: Preference and other file locations in Lightroom 5. On Mac, you must then reboot.
2. In the Library Filter Bar, select Restore Default Presets:
3. If neither of those help, take a screen shot of the entire LR screen when you have Flagged selected, and again when you have Filters Off selected. Post these here. In the past, some others have experienced wierdnesses in the LR filter behavior, and a screen shot might give some more clues. -
Question
why does Firefox give this message when I do not have another program running or another window open - "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." editSee also "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs -
I bought an episode of Grey's Anatomy TV program. When I went to watch it, it had not downloaded the first 2 minutes or so of the episode.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.
Maybe you are looking for
-
HT201210 Locked out of iPhone 4! Need Help!
I have forgotten my passcode. I locked myself out of my iPhone 4 to where it says, "iPhone is disabled, connect to iTunes". I go to connect to iTunes to restore to factory settings (i heard it is the only way) but i do not have the latest iOS update.
-
Using AVS Video Converter 5.5 for DVD on iPod
i just got AVS Video Converter 5.5 and converted my 'Scarface' DVD to MPEG format. i imported it to iTunes and tried to transfer it to my iPod and it says, "'Scarface' was not copied to the iPod because it cannot be played on this iPod." is it becaus
-
Hi all I am getting the Exception java.lang.NullPointerException: null when the Portal loads the Logon Page !!!! Application error occurred during request processing. Details: java.lang.NullPointerException: null Exception id: [0011855F2172006300
-
Will NSA get my fingerprints with the new iPhone 5S?
Will NSA get my fingrprints if I get an iphone 5S?
-
WhAt Is WrOnG WiTh ThEUpPeR/loWeRCase
I use the GoBooks app but can never find the Books folder that appears in the desktop manager. Does anyone know where it is? I end up storing books in the download folder because I can't find them otherwise. Also, what the bleep is going wrong with t