Show Project and Task name in Time entry

Hi,
Is there any possibilty to change the layout of the Time entry so I can view the Project and Task name?
Via OA Framework, Timecard styles etc....
/Daniel

Folks,
I have displayed project name on TIMECARD using below mentioned code
# Project Name on the timecard matrix
BEGIN HXC_LAYOUT_COMPONENTS "Projects Alternate Timecard Layout 100 - Project Name"
OWNER = "ORACLE"
COMPONENT_VALUE = "PROJECTNAME"
REGION_CODE = "HXC_CUI_TIMECARD"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "HXC_CUI_PROJECT_NAME"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
SEQUENCE = "201"
COMPONENT_DEFINITION = "TEXT_FIELD"
RENDER_TYPE = "WEB"
PARENT_COMPONENT = "Projects Alternate Timecard Layout - Day Scope Building blocks for worker timecard matrix"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Timecard Layout - Project Name"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "TEXT_FIELD"
QUALIFIER_ATTRIBUTE1 = "N"
QUALIFIER_ATTRIBUTE2 = "NODISPLAYCACHE"
QUALIFIER_ATTRIBUTE3 = "7"
QUALIFIER_ATTRIBUTE4 = "1"
#QUALIFIER_ATTRIBUTE6 = "OraBGGrayLight {light gray color as background}
#color:#cccccc;"
QUALIFIER_ATTRIBUTE6 = "OraFieldTextDisabled {Renders gray text in disabled form controls such as text fields, radio buttons, check boxes - does not match current BLAF guidelines}
font-family:Arial, Helvetica, Geneva, sans-serif;
color:#999999;
font-size:10pt;"
#QUALIFIER_ATTRIBUTE18 = "INCLUDE"
#QUALIFIER_ATTRIBUTE19 = "|READ-ONLY|"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
QUALIFIER_ATTRIBUTE27 = "Attribute20"
QUALIFIER_ATTRIBUTE28 = "PROJECTNAME"
#QUALIFIER_ATTRIBUTE30 = "N"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
and it involved changing QALIFIER_ATTRIBUTE6 of Project name LOV also:
QUALIFIER_ATTRIBUTE6 = "HxcCuiProjectNumber|PROJECT-DISPLAY|CRITERIA|N|HxcCuiProjectId|PROJECT|RESULT|N|HxcCuiProjectNumber|PROJECT-DISPLAY|RESULT|N|HxcCuiProjectName|PROJECTNAME|RESULT|N"
But now for all old timecards we see the project name feild, but its blank.....I am just curious that if this functionality is implemented somewhere before, then someone might have answer to my question
Thanks in advance

Similar Messages

Why can´t I create projects and tasks into a External Group?

Why can´t I create projects and tasks into a External Group?

At this time, it's not possible to collaborate on a Project with External Contributors or add an Externally-Facing group to a Project. This is functionality that we we hope to add at some point in the future.

Project and task on Internal requisition from ASCP

Hi Team,
We have an organization Project enabled. Sale and the Planning suggest the Planned order (of the nature internal requisition). When Planned order is released Internal requisition distribution is not pulling the project and task information.
Can any one help?

Hi Veekam,
Let me get clarity------You are releasing the requisition from Workbench of item that is hard pegged in your( Shipping)organisation.
you can see a project no and task assign to the planned order
You do not want the project no and task to follow to supplying organisation , but only IR should carry the PJ no and task.
I fail to understand if you do not want the Project no and Task to flow on ISO, then what is a use of Flowing with IR
Because if it flows with IR automatically it will appear in ISO as well.
You will have to also check whether the item is also hard pegged in supplying Org in that case only PJ no and task will flow to that org
IR/ISO relation is permanent whatever information IR will carry you will see same in ISO
Chintamani
9922081219

Project and Task information on Internal Requisition

Hi Team,
We have an organization Project enabled , and the Planning suggest the Planned order (of the nature internal requisition). When Planned order is released Internal requisition distribution is not pulling the project and task information.
Can any one help?

Hey - can you precisely provide your business case
Internal requistions do have project and task ,you can select those
Krishna

Why are my contacts showing numbers and not names

Why are my contacts showing numbers and not names?

When you added your contact details in the contact app did you fill in the fields correctly. For example in contacts where it says "first" did you enter a number instead of a name?

After charging my iphone5 for many hours I checked it and it 100% charged but not fully charged as the sign of charging on the top of the screen is still and the sign of unblug the charging cable doesn't show up and this happened several times ...!?

After charging my iphone5 for many hours I checked it and it 100% charged but not fully charged as the sign of charging on the top of the screen is still and the sign of unblug the charging cable doesn't show up and this happened several times ...!? What is the problem and how I fix it !? Thanks in advance :)

Apple told you it was unrepairable.... You had it serviced by an unauthorized party. It's now no longer eligible for out of warranty replacement by Apple.
There's really nothing else we can say about it. Find a competent 3rd party repair shop or buy a new one.

OTL Approvals routing based on the project and task type

We are implementing OTL with Projects in our system.
We have about 200 projects each with a different project manager. The requirement is to route billable tasks to project managers and non billable tasks to HR Supervisor. Employees may enter time for both billable and non-billable tasks in the same timecard.
I tried using fast formula approval style, but it does not split the timecard data based on the chosen project - task. All the time entries are sent to the same approver.
I tried using 2 time categories(using 2 user defined valuesets). However it seems ELA will not work when have different project managers for projects in the same time category.
Please suggest a way to implement approvals for this requirement

The best approach here would be a custom Workflow.

CProjects-Bapi's for project and task details

Hello,
I am searching for bapis for cProjects to use in a report at back end which has all the project fields and task fields.
For project i found a bapi BAPI_BUS2172_GET_DETAIL, but it does not have fields like project name,status, calculated start and finish date from teh basic data tab, division,design center from teh additional data tab.
For task fields i found bapi BAPI_BUS2175_GET_DETAIL but it does not have task status, latest start and finish date of the basic data tab.
any pointers to bapis which cover all the above fields would be really helpful.
Also I want to know is there anyway i can get the URL of the document that is uploaded in teh documents tab of the task.
Thanks,
Simmi
Edited by: Simmi Balakrishnan on May 2, 2008 9:13 PM

Hi Simmi,
Some information can not be retrieved via Bapi call. If you would like to read it, you can use simple select to get it from DB directly. The related DB are cgpl_project (dates), cgpl_text (descritption), and crm_jest (for status).
Kind regards,
Zhenbo

Mac shows symbols and takes a long time to start. HELP!!!

When i start my mac it shows me a strange symbol in a grey screen..
It looks like the symbol from the network ( that round blue circle)
Only it goes on and off the whole time.
and it takes ages to start the mac.
And after that is one is gone another one shows up.
this one looks like a map with the finder symbol in it..
and it repeats together with a question mark.
it all started when we changed our internetprovider.
What is it and how can i fix it?
PLEASE HELP ME!!!
emac Mac OS X (10.3.9)

shubs,
Welcome to the Apple Discussions!
You're seeing the NetBoot symbol; somehow, your Mac thinks it's supposed to boot off an unavailable network volume. The startup attempt will eventually time out and go on to the next devices it thinks it's supposed to try to boot from, until it eventually reaches your hard drive.
If your Mac is currently booted to the hard drive and usable, go to System Preferences> Startup Disk and select your hard drive's OS X System.
if the eMac is currently off, you can start it while holding down the 'x' key to force it to try to boot from the hard drive (more strictly, from an OS X System on the first partition of the hard drive).
Another option is to reset PRAM (which includes resetting the boot volume setting) by holding down command-option-p-r at startup until you hear three sets of chimes, then release the keys.
Once the startup disk is cleared up, you should go through the various System Preferences settings and make sure everything else is the way you want.

How can I configure MA to display "speaking" OpCode and Task names

If you have a custom ETW Eventsource definition: PerfView reads and Displays from the etl files the OpCode and Task values not as integer but as defined in EventSource inner classe for Task and in the
System.Diagnostics.Tracing.EventOpCode. My question is, how can I configure the MA to display the values not as "magic numbers" or can MA get this feature?
Regards,
Alexander
Kind regards, Alexander

Hi Paul,
please take a look to the attached picture. I've tried to make a comparison between automatically behavior of PerfView and Message Analyzer by displaying of the same performance log. The Message Analyzer got metadata, generated with wevtutil. The related
part of the manifest is here:
<tasks>
<task name="ReadingFromGdb" value="1"/>
<task name="LogReadPreInvoke" value="65532"/>
</tasks>
<opcodes>
</opcodes>
<keywords>
<keyword name="Perf" message="$(string.keyword_Perf)" mask="0x8"/>
<keyword name="Gdb" message="$(string.keyword_Gdb)" mask="0x10"/>
</keywords>
<events>
<event value="8" version="0" level="win:Verbose" message="$(string.event_LogGdbReadPreInvoke)" keywords="Perf Gdb" opcode="win:Start" task="ReadingFromGdb" template="LogGdbReadPreInvokeArgs"/>
</events>
<templates>
<template tid="LogGdbReadPreInvokeArgs">
<data name="fullName" inType="win:UnicodeString"/>
<data name="methodName" inType="win:UnicodeString"/>
</template>
I hope, it helps you to understand details of my questions.
Regards,
Alexander
Kind regards, Alexander

Jdeveloper does not show sequence and table name in dB navigator.

Hi my jdev version is 11.1.1.5.0
I have a table and sequence.I need to map sequence to this table.
But i don't see this table and sequence in jdeveloper DB navigator under my connection.Why is this happening?

Incase if you are not the owner of the table, why don't you look under synonyms/views as well. Also double check you database connection to see if it is pointing to right database server (i.e. DEV or TEST) sometime you may overlook them as well.
To double check this, connect from any other sql client tools like toad and see if you are seeing those database objects in the desired location, if not then you are looking in wrong location.

CAT2 for Time Entry (single and multiple)

Hello all,
We have been using CATW for time entry and CAT2 for multiple time entry and have security set up accordingly. We're thinking of moving to CAT2 for all time entry but need to make sure we can configure to allow single time entry for those reporting only their own time, and multiple time entry for those reporting their own as well as others. I think this may be doable between a combination of security and IMG/Data Entry profile work. Does anyone have any experience using CAT2 in this way?
Thanks,
Doug

First create a data entry profile/CVR through SPRO for a time sheet,
Then assign this profile to a user through user parameter CVR (Cats Variant for Recording) in the table USR05.
This CVR is used in CAT2 to access the time sheet corresponding to the profile assigned to the user.
Thanks
Mahi

Oracle Time and Labor time entry

Hi,
In Oracle Time and Labor on-line time entry (Timecard) screen I need to record end user's system's time as time-in and time-out i.e. user should not be able to modify the timing details.
Can OTL possibly meet above requirement. An urgent response will be highly appreciated.
Thanks
Bilal

Hi Bilal,
I tried it earlier, but was not successful.
Only thing you can do is something mentioned in the forums below -
Start/End times in Custom Formula - OTL
Auto populate system time for start/end times in OTL Time card
cheers,
VB

Every time I try to use Photo Mail in PSE 11 the program shows error and close

How to use Photo Mail in PSE 11 as it close every time I try to access

Problem have been solvedThanks for your crystal clear instructionsI do appreciate your help and care so muchGod bless you all
Date: Wed, 3 Apr 2013 09:58:39 -0700
From: [email protected]
To: [email protected]
Subject: every time I try to use Photo Mail in PSE 11 the program shows error and close
    Re: every time I try to use Photo Mail in PSE 11 the program shows error and close
    created by Andromeda14 in Photoshop Elements - View the full discussion
Please follow steps as mentioned on blog: http://tinyurl.com/cy9beny ~Andromeda
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5203304#5203304
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5203304#5203304
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5203304#5203304. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to assign project specific task with the newly created projects ?

Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

Show Project and Task name in Time entry

Similar Messages

Maybe you are looking for