Show reports in MSS

Hey guys,
if I wanna display the workset reports under MSS I get the following error message:
<b>com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Role: MSS instance: REP NOT_FOUND </b>
What causes this message and what can I do to fix it?

Hi Michael
I also did the same settings as mentioned, But It did not convert any reports.
so I still have the poblem.
any inputs?
Thanks
G
Edited by: Gayathri on Jun 6, 2011 2:51 PM

Similar Messages

BW reports for MSS via Portal

Hello,
I'm trying to start BW report from MSS without any luck.
I created a function code for the report with function type BWR3 in R/3 IMG for Manager's desktop.
I Enterd the function code in table T77MWBBWS (the table is not in the IMG !) with :
object type = 'O', Reference char. = 0ORGUNIT ,
BW rep.temp. ID = ZHR_ZHOP (the tecnical name of the BW report).
When trying to start the report from Portal-MSS i get error message
" java.lang.NullPointerException "
I don't know if I created the function code correctly (On documentation
only example for SAP Quary Report exist).
Thanks in advance,
Pazit Atar.

Hi Atar,
I am having same issue. I want to integrate custom BI Query in MSS but its giving null pointer exception even after maintaining entries in T77*BW table.
I am hoping that you could have solved issue by now. If yes, please share end to end configuration steps.
Appriciate your help as we are near to Go-Live and became show-stopper.
Thanks,
~Ketan

Creating Reports in MSS

When looking at SAP Help it talks about specifying which reports can be selected by the manager in the Reporting iView. In Customizing for Managers Desktop (MDT), you therefore create an MDT scenario that defines a list of reports to be offered for selection.
However, we have no reports that have been configured in MDT? Do we need to create some reports for use in MDT so we can use reporting in MSS?
Or is there another way of configuring reports in MSS?
Thanks
MN

Dear King,
Please execute this steps before the executing the steps i have mentioned above, this will activate the reports used for MSS. Then gofor moving the unwanted reports unactive folder. Just what you have to do it select the unwanted report and move it down to the inactive folder.
1.     In the SAP HCM System choose:
SAP Easy Access Menu
Transaction     SE38
2.     In the ABAP Editor: Initial Screen enter the Program FPB_LP_WRITE_ENTRIES and choose Execute.
3.     In the Report FPB_LP_WRITE_ENTRIES screen select the MSS Reporting and MSS with Folders options and deselect the checkbox Test Run.
4.     Choose Execute. The sample entries are entered in the Report Launchpad in the portal.
5.     Log on to the portal with User manager1 and check if the sample entries are displayed.
6.     In the ECC system leave the transaction and go back to the SAP Easy Access Menu.
7.     Enter transaction PWPC_CONV_MDT_TO_LPA in the Command field.
8.     In the Report to convert MDT table entries to LPA table entries screen, enter the MDT Scenario RPT0 and deselect the Test run checkbox.
9.     Choose Execute. The list in the next screen shows the reports which have been added to the Report Launchpad.
Do not forget to select MSS with Folders for the FPB_LP_WRITE_ENTRIES report. Otherwise you may get short dumps while editing the report launchpad, because the reports coming from the Manageru2019s Desktop do not have folders.
Regards,
Rajasekar

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Error in MSS Report (Using MSS Reporting Launch Pad)

Hello,
I'm currently using the convert manager's desktop data to MSS report launch pad for the portal.
When trying to run the report in MSS, I'm getting the error below:
"Error in Manager Self Service. When calling the report, the following error occured. Error when executing query Z_ABCD." This is from an SAP Query report and I could not determine what caused this error.
Have anyone encounter this and if you are able to resolve it?
Any information would be greatly appreciated.
Thank you,
Tam Ly
County of Sacramento

hi,
Go to transaction RSCUSTV27 and check if any standard template is maintained.
Use
In this activity you can make the following settings (for systems with a Release higher than SAP BW 3.x):
You can set your own Web template as the standard Web template for ad hoc analysis.
You can set your own Web template as a standard Web template for BEx Broadcasting.
You can set a Web template that is used during BEx Broadcasting for queries for generating documents.
You can specify a Web template that is used during BEx Broadcasting for enterprise reports.
You can set your own Web template as a standard Web template for reports.
Standard settings
The delivered standard Web template (0ANALYSIS_PATTERN) is used for ad hoc analysis.
The delivered standard Web template 0BROADCASTING_TEMPLATE is used for BEx Broadcasting.
The delivered standard Web template 0QUERY_TEMPLATE_BROADCASTING70 is used for broadcasting queries.
The delivered standard Web template 0REPORT_TEMPLATE_BROADCASTING is used for broadcasting reports.
The delivered standard Web template 0REPORT_DEFAULT_TEMPLATE is used for executing enterprise reports.
Activities
To set your own Web template as a standard Web template for ad-hoc analysis, enter the technical name of the Web template under Ad-hoc Analysis. If you do not specify anything, the delivered standard Web template (0ANALYSIS_PATTERN) will be used for ad-hoc analysis.
To set your own Web template as a standard Web template for BEx Broadcasting, enter the technical name of the Web templates under Broadcasting.
To set your own Web template as a standard Web template for BEx Broadcasting for queries for the generation of documents, enter the technical name of the Web templates under Query Precalculation.
To set your own Web template as a standard Web template for reports, enter the technical name of the Web template under Enterpr. Reports.
Note that if you change settings, you have to restart the J2EE Engine before the changes become effective.
Regards,
Kams

CRviewer do not show anything when click button to show report with VS2013

First of all I must say, My English language skill is not good but I'll try to communicate as best as possible.
I am using Visual Studio 2013Ultimate with Update4 on .NetFramework 4.5.1 and Crystal Reports SP13.0.13.1597
When installed complete. ( Previously i have tried it with my project but CR & CRviewer not working)
I have tried using CRviewer in a new asp.net page The following code
***-----WebFrom1.aspx-----***
<body>
    <form id="form1" runat="server">
    <div>
    <asp:RadioButton ID="rdoByAll" runat="server" Text="all" GroupName="rdoChoose" AutoPostBack="True" />
        FromDate :
        <asp:TextBox ID="txtDateFrom1" runat="server" AutoPostBack="True"></asp:TextBox>
        ToDate :
        <asp:TextBox ID="txtDateTo1" runat="server" AutoPostBack="True"></asp:TextBox>
        <asp:Button ID="btnCallReport1" runat="server" Text="CallReport" />
        <br />
        <br />
        <asp:RadioButton ID="rdoByName" runat="server" Text="ByName" GroupName="rdoChoose" AutoPostBack="True" />
        FromDate :
        <asp:TextBox ID="txtDateFrom2" runat="server" Height="16px" Width="150px" AutoPostBack="True"></asp:TextBox>
        ToDate :
        <asp:TextBox ID="txtDateTo2" runat="server" Height="16px" Width="150px" AutoPostBack="True"></asp:TextBox>
<asp:Button ID="btnCallReport2" runat="server" Text="CallReport" />
        <asp:DropDownList ID="ddlNamelist" runat="server" AutoPostBack="True">
        </asp:DropDownList>
        <br />
        <br />
        <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="True" ToolPanelView="None" />
        <br />
    </div>
    </form>
</body>
***-----WebFrom1.aspx.vb-----***
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Imports CrystalDecisions.Web
Public Class WebForm1
    Inherits System.Web.UI.Page
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
    End Sub
Protected Sub rdoByAll_CheckedChanged(sender As Object, e As EventArgs) Handles rdoByAll.CheckedChanged
        If rdoByAll.Checked = True Then
            txtDateFrom1.Enabled = True
            txtDateTo1.Enabled = True
            btnCallReport1.Enabled = True
            txtDateFrom2.Enabled = False
            txtDateTo2.Enabled = False
            btnCallReport2.Enabled = False
            ddlNamelist.Enabled = False
        Else
            txtDateFrom1.Enabled = False
            txtDateTo1.Enabled = False
            btnCallReport1.Enabled = False
            txtDateFrom2.Enabled = True
            txtDateTo2.Enabled = True
            btnCallReport2.Enabled = True
            ddlNamelist.Enabled = True
        End If
    End Sub
    Protected Sub rdoByName_CheckedChanged(sender As Object, e As EventArgs) Handles rdoByName.CheckedChanged
        rdoByAll_CheckedChanged(sender, e)
    End Sub
    Protected Sub btnCallReport1_Click(sender As Object, e As EventArgs) Handles btnCallReport1.Click
        Dim rpt As New ReportDocument()
        rpt.Load(Server.MapPath("CrystalReport1.rpt"))
        Me.CrystalReportViewer1.ReportSource = rpt
        Me.CrystalReportViewer1.RefreshReport()
    End Sub
End Class
When i press F5 to run project make Code of radiobutton not work(Disable,Enable OtherControl such as textbox)
And when i try press CallReportButton CRviewer do not show anything.
When I brought CRviewer leaving the page ,Code of Radiobutton were working fine.
But can't to show "CrystalReport1.rpt" on CRviewer when i click CallReportButton. i'm not understand.
Then i have tried to learn from follow this link : CR not working in visual studio 2013
and Using Crystal Report in ASP.Net website, Report not showing in CrystalReportViewer
i have to create a new CR ASP NET project and copy the whole C:\inetpub\wwwroot\aspnet_client folder
into my app folder and then add this to your web.config file, line in bold: <add key="vs:EnableBrowserLink" value="false"/>
project is working but not fine when I try to click button to call report I get this pop-up .   " popup.JPG"   what is it?
And project warning! could not find schema information every element . "Could not find every Element.JPG"
After that, copy the whole C:\inetpub\wwwroot\aspnet_client folder into my app folder Only! not add in my web.config
(In previous project need to use CR) make to project were working but i get same pop-up when i click to show report.
**** buleline in popup.JPG picture is "The report you requested requires further information"

I think you're over-complicating things. I'd like you to have a look at a few sample apps, see how they work, then adjust your app. Samples are here:
Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
Also, have a look at Crystal Reports for Visual Studio 2005 Walkthro... | SCN (- applies to all versions of CR and .NET).
Finally, the Developer Help files are here:
SAP Crystal Reports .NET SDK Developer Guide
SAP Crystal Reports .NET API Guide
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

Custom reports in MSS

Dear SDN Community,
Can you please tell me how do I get the custom R/3 reports into MSS iviews. Do I need to customize anything in R/3 if I want to pull an existing R/3 report into portal. What are the MSS iViews that I should work here. I have no BW or any other custom reports but just R/3 custom reports.
Thanks!
Vivek.

check these links
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm">Help link</a>
Hope this helps.
Warm regards,
Sudhir

Report Painter: Possible to show Report with Zero (not No records were sel)

Report Painter: Possible to show Report with Zero (not No records were selected)
Dear Guru,
is there any way to make Report Painter to show Report with Zero / 0 when there were no record were found. (No records were selected).
Regards,
Howard

hummm, I dont think so
THats not possible, as far as I know
Regards
Ajay M

HIS reports in MSS

Hi,
We have requirement that HIS reports in R/3 should be fetched to reporting workset in MSS.
Is this possible?Please let me know solution.
Thanks,
Usha

Hi
Please see the following help link regarding HIS reports in MSS
http://help.sap.com/erp2005_ehp_04/helpdata/EN/3a/3198408d953154e10000000a1550b0/content.htm
Best wishes
Stuart

To show report which list all Accounts with no activity associated with it

Hi
1) Is it possible to show report which list all the accounts which do not have any activity associated with it?
2) A report which shows All the accounts with Activity ( Even though there is no activity associated with it)
Quick reply appreciated

Hi Rits,
You can achieve this using combine analysis. Create two reports and in the first one make the Activity Id blank, In the second report keep it as it is and do union of both the analysis.
This will give you all the accounts which have/have not Activities associated with them.
Hope it helps,
Thanks,
Mayank

Regarding WBS Transactional Report in MSS-Financials

Hi,
My standard WBS Transactional Report in MSS-Financials does not work anymore.
When I click on the WBS transactional report I get a report which I have saved in my favourites. This is not normal. Can anyone please reply for me why this is happening?
Many Thanks
Rizwan

This can only be controlled by means of Structural Authorization. Contact the HR Consultant

Show report on extension pdf on the explo

i want show report by Jsp on extension pdf
tools i used jdevolper ,jsp, data base ,sql,
what the tools can help me or backge please

Yes, I know this is an old post, I’m just trying to clean them up.
There is no report that will show you when a SU was installed on a PC. At best you can use the last change date but they is no reliable for several reasons. As for your second question, I’m not sure what report or category you are looking
at. You will need to provide more details.
http://www.enhansoft.com/

Remove Reports from MSS

Hello,
I am working with the SAP MSS Business Package on the Portal. We have a functional requirement to remove all the "Time Management" reports that show up under the 'Reports' tab for the MSS role. I looked at the Reports iView and there is no option for me to select the reports that should/should not be shown on the portal.
How can I prevent some of the reports from being displayed on the Portal?
Thanks you for all the help...
Guy

Hi James,
Try doing this
Go to Personnel Management -> Manager's Desktop -> Enhancement of Function Codes -> Define Structure of Function codes -> Change Arrangement of Function Codes.
From here enter the scenario, higher level function code, and level number in the table. Be sure to check the box "function code hidden" to hide the item from the list.
also check link
MSS Reporting iview (remove certain reports)
Thanks N Regards
Santosh
Reward if helpful !!!

BW Report Error - MSS (Headcount Report)

Hi,
We just installed MSS on our ERP 2005 system. When I log into the portal the Headcound report has a short dump. Below find the dump message. Can someone please help me on how to fix this bug.
Thanks
Salim
Error Log:
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.erp.mss.manager/overview/com.sap.pct.erp.mss.team/com.sap.pct.erp.mss.team/com.sap.pct.erp.mss.headcount_overview
Component Name : com.sap.portal.appintegrator.sap.BWReport
Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bw/BEx?sap-client=<System.client>&sap-language=<Request.Language>&accessibility=<User.Accessibility[SAP_BOOL]>&style_sheet=<LAF.StylesheetUrl[url_ENCODE]>&<TrayInformation[IF_true PROCESS_RECURSIVE]>&<Authentication>&<Report>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 0. Cannot process expression <System.Access.WAS.protocol> because Invalid System Attribute: System: 'SAP_BW', Attribute: 'protocol'. .
Exception id: 08:45_24/01/07_0009_2066950
See the details for the exception ID in the log file

Hi Salim, sorry for the delay but I was in transit...
Check the following <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5523">weblog</a>. It has some useful information about the parameters needed for BW integration. The error you are getting is from the portal appintegrator component, not from BW. So you should check the parameters you are setting.
Cheers,
Marcelo

Show report as PDF directly.

Hi BO teams,
   Can we show the report as PDF directly instead of showing a CR Viewer component?
Meaning I dont need to invoke the export feature of crystal report. If yes
a sample code will be greatly appreciated. Many thanks.
Best regards,
June

Hi,
You can export the report with out viewing using the viewer object but you need to use the export control to do this.
sample code as below.... Hope this will help you
ReportExportControl exportControl = new ReportExportControl();
exportControl.setParameterFields(getReportFields(map));
try {
      exportControl.setReportSource(getReportSource(map.get(REPORT_NAME)));
} catch (ReportSDKExceptionBase e) {
     e.printStackTrace();
ExportOptions exportOptions = new ExportOptions();
exportOptions.setExportFormatType(ReportExportFormat.PDF);
exportControl.setExportOptions(exportOptions);
exportControl.setDatabaseLogonInfos(getConnectDetails());
exportControl.setExportAsAttachment(true);
exportControl.processHttpRequest(request, response, session.getServletContext(), null);
exportControl.dispose();

Show reports in MSS

Similar Messages

Maybe you are looking for