Show Running Rules and Monitors for this Health Service task for Unix/Linux agents?

I know there is a way to do this for Windows agents, but is there a way to do this for Unix/Linux agents? When I click on the agent I dont see the option in the task pane. Is there something else that I can use?
If you're going to answer my question with pretentiousness or disrespect, move on to another question. I don't need your help. Thank you

Figure it out after some digging
http://blogs.technet.com/b/daniels_opsmgr_blog/archive/2011/05/14/troubleshooting-mp-fix-wrong-roll-up-monitor-state.aspx
I didnt have the MP imported. Although it works now, not very useful.
EFD
If you're going to answer my question with pretentiousness or disrespect, move on to another question. I don't need your help. Thank you

Similar Messages

Setting Overrides on all relevant Rules and Monitors

Can someone please help me with the following question? I was reading the post below (I believe written by
Cameron
Fuller) detailing some best practice around overrides. It stated if you override a ‘parameter’ for one rule/monitor (e.g. let’s say a parameter
dealing with a threshold) you should override the parameter for ‘all’ rules and monitors 'that use this parameter'. More information from the post below
Make sure that an overridden parameter is set for every rule and for every monitor that uses the parameter
When you override a parameter, make sure that the parameter is configured for each rule that uses the parameter and for each monitor that uses the parameter. There may be more than
one rule or monitor that uses the particular parameter. For example, the following rules and monitors use the
Intersite Expected Max Latency parameter: Monitors
AD Replication Monitoring
Rules
AD Replication Performance Collection - Metric Replication Latency
AD Replication Performance Collection - Metric Replication Latency: Maximum
AD Replication Performance Collection - Metric Replication Latency: Minimum
AD Replication Performance Collection - Metric Replication Latency: Average
Now my question is:
How do I discovery all the rules/monitors that are using this particular ‘parameter’?
For example using either PowerShell or SQL query. If PowerShell I assume you would have to
use Get-Rule or Get-SCOMRule with the –Criteria filter. Does anyone have an example please?
As a side note I could do the following in PowerShell as one way to find all cmdlets what use the –path parameter as one of their parameters
Get-Command -CommandType cmdlet | where {$_.parameters.keys -eq "path"}
So to recap: As above if I want to set an override on ‘Intersite Expected Max Latency’
for a given rule or monitor how do I find all other rules/monitors also use ‘Intersite Expected Max Latency’
as I can override these too?
Thanks All
AAnotherUser__
AAnotherUser__

Hi,
We may use the specific word to filter out those proper rules and monitors， to filter out all monitors that which name contains latency:
get-scommonitor -name “*latency*”
Please refer to the below links to find more details about the get-scomrule and get-scommonitor command:
Get-SCOMRule
http://technet.microsoft.com/en-us/library/hh918556(v=sc.20).aspx
Get-SCOMMonitor
http://technet.microsoft.com/en-us/library/hh918469(v=sc.20).aspx
Regards,
Yan Li
Regards, Yan Li

Script to change the priorty of all rules and monitors in a Management Pack

Script to change the priority and severity of all rules and monitors in a Management Pack in an override MP .We are deploying an MP in production and don't want the helpdesk to take any action on any alerts, so want to set all of them as informational.Once
they are reviewed then we will delete that override mp
Can some one help me with a script

Is this MP sealed? Doesn't really matter.. Unseal the MP if it is sealed. Now you have access to the RAW XML. Alert severity and priority have xml tags. You should be able to do a search and replace and change all the various
levels (0-3 or whatever they are) to the levels and priority you want.
Then you can seal the mp with your own key, or just roll it into prod as an unsealed MP.
This seems, to me, like the quickest and easiest way to make all of these changes at once. To bulk override everything, not even sure it's still around or even works, there was a tool called Override Explorer, and you could select multiple monitors/events
and create overrides. I can't remember very much about the tool because we didn't use it much, but I think it did this with live data, meaning it connected to your management server, and you made the changes in real time.
Of course you wouldn't want to do this in production, so do it in a lab, then export the override mp and put it in prod.
There is probably some snazzy way to do this with PoSh, but I am not aware of any atm.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

I am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and i

i am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and it claims to be downloading but this is not happening at all. I am on a Macbook Air and Abobe for my $600 a year membership you have totally ruined by Friday night. If there's a human being out there at Abode please respond now

Hi,
If you have already subscribed to the membership, please follow the help document below:
https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Regards,
Sheena

My suddenly no longer works and dosn't show any sign and when i try to make restore for it iTunes shows me error 4005 and my iPhone does not respond to iTunes

my suddenly no longer works and dosn't show any sign and when i try to make restore for it, iTunes shows me error 4005 and my iPhone does not respond to iTunes

OK, and when you searched for information on iPhone error 4005 what did you find?

HT4108 I have a apple component AV TV out cable (red, green,blue + red,white) and have had this connected to TV for about 6 months working fine. I moved the TV disconnected cables to move now I can only get video and no sound back on TV. Any suggestions

I have a apple component AV TV out cable (red, green,blue + red,white) and have had this connected to TV for about 6 months working fine. I moved the TV disconnected cables to move now I can only get video and no sound back on TV. Any suggestions ?

No answer but marking as answered because I want to clear my unresolved questions.

An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Hi I m getting the below wxpection when i run test browser from workshop. please help me.
An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Thamarai,
Can you provide more information on your jws ? Also can you start the server
from the command line with verbose option. This will cause
weblogic_debug.log to be generated in the domain folder.
Raj Alagumalai
Backline Workshop Support
"Thamarai Selvan" <[email protected]> wrote in message
news:[email protected]..
Hi I m getting the below wxpection when i run test browser from workshop.please help me.
>
An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
java.lang.reflect.InvocationTargetException:null

A device which is not part of this management group has attempted to access this Health Service.

Has anyone found an answer to this yet? I have uninstalled/reinstalled the agents both manually and through the push. Rebooted the client, rebooted the sce server. Forced the group policy to reapply, forced the health agent to /reportnow and I still get the error. The client shows up under the agent managed section but under the health state column it shows not monitored. The clients can ping the SCE server by FQDN and RDP to it as well so name resolution is working fine.
On the the SCE server I get this in the log
Event Type: Information
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20000
Date:  6/25/2009
Time:  10:09:40 AM
User:  N/A
Computer: *******
Description:
A device which is not part of this management group has attempted to access this Health Service.
Requesting Device Name : *****
And this
Event Type:            Information
Event Source:           OpsMgr Connector
Event Category:       None
Event ID: 21042
Date:                        6/25/2009
Time:                       10:25:14 AM
User:                        N/A
Computer:                ***********
Description:
Operations Manager has discarded 1 items in management group Servername_MG, which came from $$ROOT$$. These items have been discarded because no valid route exists at this time. This can happen when new devices are added to the topology but the complete topology has not been distributed yet. The discarded items will be regenerated.
On the client I get
Event Type: Error
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20070
Date:  06/25/2009
Time:  10:06:13 AM
User:  N/A
Computer: ******
Description:
The OpsMgr Connector connected to ****** but the connection was closed immediately after authentication occured. The most likely cause of this error is that the agent is not authorized to communicate with the server, or the server has not received configuration. Check the event log on the server for the presence of 20000 events, indicating that agents which are not approved are attempting to connect.
And this as well
Event Type:            Error
Event Source:           OpsMgr Connector
Event Category:       None
Event ID: 21016
Date:                        06/25/2009
Time:                       10:06:18 AM
User:                        N/A
Computer:                ******
Description:
OpsMgr was unable to set up a communications channel to **** and there are no failover hosts. Communication will resume when ******* is both available and allows communication from this computer.
And this
OpsMgr has no configuration for management group Servername_MG and is requesting new configuration from the Configuration Service.

Hey Nathan,
Yea I have sent the script to eveyone that has aked for it. I dont know if its helped anybody else as none has given me any feedback either way.
I guess I can post it here for everyone to use.
Please keep in mind that if you use this script from MS its at your own risk, If your DB blows up, massive catastrophic failure ensues and so forth ITS YOUR OWN FAULT. MAKE SURE YOU HAVE GOOD BACKUPS
Step 1) Run this against your SCE 2007 DB
DECLARE @BaseManagedEntityInternalId int
DECLARE @BaseManagedEntityId uniqueidentifier
DECLARE @ViewName sysname
DECLARE @Statement nvarchar(max)
SET @BaseManagedEntityInternalId = 0
WHILE EXISTS (SELECT * FROM BaseManagedEntity WHERE (BaseManagedEntityInternalId >
@BaseManagedEntityInternalId))
BEGIN
SELECT TOP 1
@BaseManagedEntityInternalId = bme.BaseManagedEntityInternalId
,@BaseManagedEntityId = bme.BaseManagedEntityId
,@ViewName = met.ManagedTypeViewName
FROM BaseManagedEntity bme
JOIN ManagedType met ON (bme.BaseManagedTypeId = met.ManagedTypeId)
WHERE (bme.BaseManagedEntityInternalId > @BaseManagedEntityInternalId)
AND (bme.IsDeleted = 0)
ORDER BY BaseManagedEntityInternalId
SELECT @Statement = 'IF NOT EXISTS (SELECT * FROM ' + QUOTENAME(@ViewName) + '
WHERE BaseManagedEntityId = ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ''')
PRINT ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ' ' + @ViewName + ''''
EXECUTE(@Statement)
END
STEP 2)
If your problem was the same a mine you should get some GUID’s returned. (For example 93790c0B-09C4-3A4D-CE72-F4E3Dd917D78 MTV_DeploymentSettings)
Using the GUID that we got in the output file
Execute the below given query:
==========================
select fullname
from basemanagedentity
where basemanagedentityid = ‘<GUID>’
==========================
Verify that the device or the object mentioned in the above output is not displayed in Operations console.
Only in case if the object is not displayed then use the below given query to delete it from database.
==========================
update basemanagedentity
set isdeleted = 1
where basemanagedentityid = ‘<GUID>’
==========================
Before executing the above query please ensure that you have the backup of the database. Also note that you need to run the above said query only incase if you do not see the object in the Operations console.
After executing this query, run this stored procedure:
==========================
exec p_Detectandfixinstancespaceinconsistencies
==========================
Once it is done:
> Stop all the three OpsMgr services: health, Config and SDK on Management Server
> Cleared the health service state folder.
> Start all the three OpsMgr services: SDK, Config, and health on Management Server.
> Wait for 30 minutes and see if the agents start getting monitored.
I hope this helps everyone

SCOM not generating alerts & The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager

Hi Anyone can assisting on this. The SCOM 2007r2 i managed suddenly do not pump out alerts.
I have perform full scom service restart(data access, agent, config). it no load up related datawarehouse like(stored, write)
I also restarted my sql db services. It show me the error like this. Anyhow i can fix it
The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager" requested
by the login. The login failed.
Login failed for user 'HK\svc-scomsdk'.
   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at System.Data.SqlClient.SqlConnection.Open()
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at System.Data.SqlClient.SqlConnection.Open()
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)".

Hi,
I would like to suggest you reset the SDK account password (in this case, it seems like that the account is 'scomsdk'). And change the password for the account in service configuration.
Please go through the below article for details:
How to change the credentials for the SDK Service and for the Config Service in Microsoft System Center Operations Manager
http://support.microsoft.com/kb/936220/en-us
Regards,
Yan Li
Regards, Yan Li

I'm unable to play game in hp 15-r009TU.. what can i do for this. please help me for this

i'm unable to play game in hp 15-r009TU.. what can i do for this. please help me for this

Hi Madhuama, I'll try to give you a hand with this. First off, what OS is running on your notebook, what game are you attempting to play, and how is it not working? Is it not installing?
Thanks,
Fenian Frank
I work on behalf of HP

Authorization is required for this network service

I am trying to set up Shared Reviews with Acrobat 9.5 using an internal server running IIS 7.0 and Windows Server 2008 SP1. I have users that will be accessing the reviews from within our domain and users that will be accessing reviews from other domains. What is the proper Authentication method to use? What are the proper folder sharing and security setup?
When initiating a shared review, I can get to the dialog box where I enter email addresses. After I click Send, I am unable to get passed the Remote Service Authentication dialog. The RSA dialog appears three times. I enter my username and password three times. The last time a dialog appears. Part of the message on it says, "Status: The shared folder location you provided is not setup correctly to store comments for this shared review. The problem is: Authorization is required for this network service."
Thanks!

Hi,
I am using a web server folder.
All participants have r/w access.
I can send email and use Acrobat.com
I can open a web browser and type in the web address for the web server folder. I am presented with a dialog requesting username and password. I key those in and then the default.htm displays in the browser. I can do this from both inside and outside our domain. That suggests that the IIS setup is correct.
If I try a shared review within Acrobat, after I have keyed in an email address for a recipient and click send, I am presented with the Remote Service Authentication dialog box. After entering the username and password three different times I see an error message box that says:
Status: The shared folder location you provided is not setup correctly to store comments for this shared review. The problem is: Authorization is required for this network service.
Any assistance would be greatly appreciated.
Sincerely,
Steve

I am trying to download itunes and I get this message: Service apple mobile device failed to start. Verify that you have sufficient privileges to start system services??? what do I do?

i am trying to download itunes and i get this message: service apple mobile device failed to start. verify that you have suffient privileges to start system services. what do i have to do?

Hi txatxo
Thanks for using Apple Support Communities. You may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari

Need my Email Address Switched for This Forum-Been Trying for a Week

Need my Email Address Switched for This Forum-Been Trying for a Week.
Can an Administrator PM me and switch it?
thank you!

See post here for more information, but this is officially resolved!
As of 09/29/09, you can now change your email address for the forum via My Settings even if you have a community-only id. Many thanks to the mods for this update!
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

An error occurred during the submit process. Authorization is required for this network service

Dear Guru,
I have found error message when I submit form. The form show message "An error occured during the submit process. Authorization is required for this network service." If the form work correctly, it should trigger email with this form. Can somebody help me to find out the solutions?
Thanks a lot.
Wiriya C.

I am also facing same error.
Please let me know if you have resolved problem.

Unable to see views Active Alerts, Discovered Inventory, Distributed Applicatios, Task Status, Unix/Linux Computers, Windows Computer under Monitoring workspace after upgrading to UR6

Hi All,
Recently I upgraded SCOM 2012 SP1 CU5 to CU6 and facing following issue:
1. New menu item got grayed out that appears upon the right click on Monitoring node(root) under monitoring workspace.
2. When we click Monitoring in the navigation pane, the Monitoring Overview opens, which displays a summary of health states and alerts. if we click any of the numbers in the overview, it is supposed to open a state view of the selected category but
this function does not work now.
3. Views like Active Alerts, Discovered Inventory, Distributed Applications, Task Status, Unix/Linux Computers and Windows Computer do not appear under Monitoring workspace after upgrading to UR6.
Has anyone out there facing such kind of issue? Any help on fixing these issues would be appreciating. Thanks in advance.

Hi,
Have you re-opened the operation manager console?
There are some known issues when intalling UR6, please go through it:
http://support.microsoft.com/kb/2929885
In addition, there is CU7 for SCOM sp1, why not installing the newest one:
http://support.microsoft.com/kb/2965420
Regards,
Yan Li
Regards, Yan Li

Show Running Rules and Monitors for this Health Service task for Unix/Linux agents?

Similar Messages

Maybe you are looking for