Show scheduling message when direct edits to Start date
Is therre a way to show scheduling message when someone is editing the Start date directly for a task, I understand that a constrain get set by doing so, yet I also want to display some kind of scheduling message to the PMs, is it possible.
Yes, Julie you are right. If "Advice from Planning Wizard" option is cleared in Options, Project updates a key to value 0
Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\Display PlanningWizard
But if "Do not tell me about this again" is selected in Planning Wizard dialog the below key is updated and there is no way to turn this on through Options:
Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\PlanningWizardCases
By default, the Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\PlanningWizardCases has the value 11111111111111111111111111111111111111111111111111111
Also, there are several combinations too. If "Do not tell me about this again" is selected when a successor task is moved from the predecessor, the Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\PlanningWizardCases
is updated with 11111111111011111111111111111111111111111111111111111
Sai PMP, PMI-SP, MCTS Project, MVP Project
Similar Messages
-
Show error message when Install SM7 in step 4 execute Service
Hi All
Show error message when Install SM7 in step 4 execute Service.
Anyone can help me fix the problem pls!
Regards
Kevin
Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
Information for SAPInst:
sid=SMD
number=98
2009.06.08 11:16:59
Task completed with status 0
INFO 2009-06-08 11:17:00.0
Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.250
FSL-02077 File system export (share) saploc does not exist.
INFO 2009-06-08 11:17:00.484
Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.718
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:05.265
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO 2009-06-08 11:17:05.609
Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:05.875
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:08.187
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:10.531
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:12.859
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:15.156
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
WARNING[E] 2009-06-08 11:17:20.281
FSL-01002 Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
INFO 2009-06-08 11:17:20.562
Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:20.781
Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:22.312
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
INFO 2009-06-08 11:17:28.828
Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:29.093
Node C:\WINDOWS\system32 already exists.
INFO 2009-06-08 11:17:31.0
Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:32.390
Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
INFO 2009-06-08 11:17:33.171
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.203
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.250
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.281
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.328
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.375
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.421
Nothing to do. User privileges are an empty string.
INFO[E] 2009-06-08 11:17:35.703
FSL-01027 Account user="hk-is-000818\SAPServicePAS" does not exist.
WARNING[E] 2009-06-08 11:17:40.796
FSL-01002 Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
WARNING[E] 2009-06-08 11:17:40.796
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-06-08 11:17:40.843
FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .hi Subhash
tkx it work
but I got another error when install afterwards. do u know how can fix , many tkx
Kevin
WARNING 2009-06-09 20:39:02.421
Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-06-09 20:39:02.468
FCO-00011 The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR . -
Error message when I try to start the SC SM Console
Hi,
i get the following error message when I try to start the SC SM Console in TN MSDN Virtual Lab
Message: Failed to connect to server 'SCSM01.contoso.com'
Microsoft.EnterpriseManagement.Common.UnknownServiceException:
The
service threw an unknown exception. See inner exception for details.
---> System.ServiceModel.FaultException`1[System.UnauthorizedAccessException]:
The creator of this fault did not specify a Reason. (Fault Detail is
equal to System.UnauthorizedAccessException:
You have exceeded the
evaluation period of this product. For information on purchasing the
retail version of this product, go to
http://go.microsoft.com/fwlink/?LinkID=151842.
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.CheckLicence()
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect(SdkClientConnectionOptions
options)
at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect(SdkClientConnectionOptions
connectionOptions)).
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception
ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings
connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings
connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings
connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings
connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ServiceManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings
connectionSettings, EnterpriseManagementGroupInternal
internals)
at Microsoft.EnterpriseManagement.ServiceManagementGroup..ctor(ServiceManagementConnectionSettings
connectionSettings)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupSessionManager.Connect(String
server)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.Credentials.ManagementGroupConnection.TryConnectToManagementGroupJob(Object
sender, ConsoleJobEventArgs args)
System.ServiceModel.FaultException`1[System.UnauthorizedAccessException]:
The creator of this fault did not specify a Reason. (Fault Detail is
equal to System.UnauthorizedAccessException:
You have exceeded the
evaluation period of this product. For information on purchasing the
retail version of this product, go to
http://go.microsoft.com/fwlink/?LinkID=151842.
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.CheckLicence()
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect(SdkClientConnectionOptions
options)
at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect(SdkClientConnectionOptions
connectionOptions)).System.UnauthorizedAccessException: You have exceeded the evaluation period of this product
If this is an evaluation lab, then it's time to rebuild it.
If this is a production system, then you'll need to contact product support, show proof of ownership, and get their tool that will convert the management group to a licensed version.
Generally, when building a system for production, you should do it with a full product key. there is no supported method to add the license key later except through product support's special tools. -
I just updated Firefox but can't get it to display the message when a pop-up is blocked. Most times I want them blocked but sometimes I need them enabled.
You can see a pop-up block icon in the right corner of the Status Bar if you have chosen to hide the information bar at the top.
You can left-click that pop-up block icon on the Status Bar and remove the check mark from "Don't show info message when pop-ups are blocked"
You can look at these prefs on the '''about:config''' page and reset them via the right-click context menu:
Status bar icon: browser.popups.showPopupBlocker
Info bar at the top: privacy.popups.showBrowserMessage
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page. -
After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.
One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time. -
Old address still showing in contact after I edit with new address. However, it shows correct address when in edit mode. Is this a new glitch on the iPhone iOS 7?
1) Is it a video clip? Something you recognize? To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
2) What are your sequence settings? Right-click your sequence and choose "Item Properties" to verify. -
Show Me Messages When I Launch Reader
I have created a package ArcoRead.msi with a MST.
I was wondering if I could automate the following settings:
- Show Me Messages When I Launch Reader
- Don’t Show Messages While Viewing A Document
I want the first one to be deselected and the second one to be selected.
How can I manage that ? By customize package or by registry key ?
Any help is welcome.found it myself using procmon.exe
This two entrys to disable "Messages from Adobe" (See Preferences > General)
HKCU\Software\Adobe\Acrobat Reader\10.0\IPM\bDontShowMsgWhenViewingDoc: 0x00000001
HKCU\Software\Adobe\Acrobat Reader\10.0\IPM\bShowMsgAtLaunch: 0x00000000
Would there be a HKLM solution as well. Does anybody know ?
For now I added the keys with the Adobe Customization Wizard 10 in my MST. Works perfectly.
Next step will be creating the file HideItems.js to hide Adobe Online menu items. -
After publishing an adobe captivate 8 file that has a video I got this message when the video slide starts. I'm using Adobe media encoder and it outputs the file as f4v formate and when inserted into the adobe captivate 8 project, I found that I'm still getting the same error message after publishing the project. I'd appreciate if you have any useful suggestions.
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2036: Load Never Completed. URL: file://C:\Users\User\AppData\Local\Temp\Rar$DIa0.291\haloSkin1_as3_progressive.swf"]
Thanks in advance
Warm ReagrdsAfter publishing an adobe captivate 8 file that has a video I got this message when the video slide starts. I'm using Adobe media encoder and it outputs the file as f4v formate and when inserted into the adobe captivate 8 project, I found that I'm still getting the same error message after publishing the project. I'd appreciate if you have any useful suggestions.
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2036: Load Never Completed. URL: file://C:\Users\User\AppData\Local\Temp\Rar$DIa0.291\haloSkin1_as3_progressive.swf"]
Thanks in advance
Warm Reagrds -
Shows error message when starting up, then turns off
Hi, my ipod shows the apple when I restart it, then shows the folder with the exclamation point then shuts off. Also, the computer won't recognize it. Since it doesn't show up on the iTunes or the Finder, is there anything I can do?
Thanks.Since this is over a week old, I assume you've got the problem sorted out.
If not, please ignore the spammer & see if this can help;
http://docs.info.apple.com/article.html?artnum=61003 -
OS X 10.5 Mail shows unread messages when there are none and get ghost messages
I have been searching for an ansswer to this delimma, but have found similar issues but none exactly the same. I run 10.6 server and have mixed network users of 10.6 and 10.5 clients. One of the users on 10.5 's mail app keeps showing unread messages, but there are no unread messages. When they click on another mail box in the mail client or another folder the number changes, but ther always seems to be one or two. The user also gets at least 2 blank e-mails in the mail app. I have check the users web mail account and there are no blank e-mail messages or spam. I tried to rebuild the mail box, and have also tried trashing the indexs, and they still get the same message. Short of creating a new user does anyone have any suggestions? None of my other users seem to have the same problem, although they do not use mail as much as this one user does.....
I get this issue every single day, and it is specifically reproducible. Here is the scenario:
1) I have two mail accounts configured on my iPhone, one is my work account and is disabled on the phone, the other is my gmail account which is always enabled on my phone
2) Each morning, when I head into work I enabled my work email account so I can start reading my work emails for the day. This downloads all the new messages from the server and displays them as unread.
3) I read some of them, but not all of them.
4) Once I get to my office, I read all of the rest of my new work emails from the Mail app on my MacBook Pro.
EXPECTED: The messages that are read on the mail app are updated as read messages
OBSERVED: On my iphone, not all of the messages have their statuses changed to read. Some of them always remain as unread messages
5) Next, I delete some of the messages read from my computer from the email server altogether.
EXPECTED: These messages would also appear deleted when using the mail app on my iPhone
OBSERVED: Not only are the messages not deleted, but they are still listed as unread
The only way to resolve this each day is for me to select each message and view it for a second to have the unread message indicator removed. I have to turn off the mail account and turn it back on for it to correctly sync with the mail server and correct the mistakes.
There is clearly a problem within the iPhone mail app with retrieving updates from the mail servers.
I have an iPhone 4 running iOS 4.2.1 that I purchased in November. Before that, I had an iPhone 3G S and never experienced the issue on my 3G S. My MacBook Pro was used with both devices. -
Error message when iTunes tries to start.
Whenever I try to start iTunes I get a send error report message. iTunes was working fine until I had to do a system restore, and then this problem started cropping up. I've tried reinstalling several times, and it doesn't seem to work.
Itunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.) -
Since I installed Nero 2014 I get an error message when I start iTunes that registry settings for importing and burning cds/dvds have changed probably due to other burning software installed please reinstall iTunes, which I've done using 'repair' option, but the problem persists. I have been able to import cds to iTunes since I installed Nero, but it won't anymore. Does anyone recognize this problem and have a solution? Thanks for any help. Using Windows 7.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters -
How can I set the view to only show unread messages persistently for a mailbox (e.g. junk)?
I used to be able to set it by folder. Removing the feature does not make the product better. I have no desire, for example, to see all the old spam, but I do want to see my old mail. I don't understand what the developers were thinking when they removed this capability.
-
When I choose my "Mail" app it only shows 2 messages in my inbox when I know there are more. How do I resolve this? Thanks.
You need to create HTML signatures for use with the Apple Mail apps. You can't just throw in a logo, it has to be stored on the internet and it's location coded into your signature. You may find a service and an app that helps you do that in the iTunes App Store.
-
Show status message when we press "to order" button in Tcode MB1A
Hi Friends,
I want to show a status message when the button "to order" is triggered in the Tcode MB1A. The status message can be shown either in the 1st screen or 2nd screen.
Thanks,
AnuHi Anuradha,
Check this BADI: MB_CHECK_LINE_BADI
Reddy
Maybe you are looking for
-
I was having a bit of difficultly in getting crop settings to properly sync in Lightroom 5.7.1 (running on OS X 10.10.1) when Constrain to Warp was checked. This appears to be a bug in the latest version(s) of Lightroom that include(s) the GoPro Her
-
Bug in JCheckBox / bc4j boolean attribute
Hi, I've got an attribute that is of type boolean. In the database, it's a NUMBER(1,0) field. In my jclient, I've used a JCheckBox with it's model set to the boolean field. I've chosen '0' for the false value and '1' for the true value. If I create a
-
No Internet Connection - Apple, Where's The Help?
I started using my MBA last week and have been unable to consistently connect to the internet through wireless networks in multiple environments (my home, my office, airport, hotels) when other Apple laptops are connecting without issue. Right now I'
-
Problem in Printing ABAP Report in EP using SAP Transaction IVIEW
Dear All, A very gud evening, I am using SAP Transaction Iview to show the ABAP Reports, But I have a Problem... How to print this report??? Please solve this issue, I have measure requirement of it from client. Thanks in Advance..
-
I recently pre-ordered an album off iTunes and it just became available last night but it wont let me download it.What do I do? It says it is purchased but it just isn't downloading.