Show suppressed unassigned nodes in Hierachy

Dear all,
is there a way to show unassigned nodes of a hierarchy although the hierarchy attributes are set to hide them?
If not, is there a way to suppress unassigned nodes in a query if the attribute is not set for a hierarchy?
Thanks in advance
Oliver

If the hierarchy attribute is set, not to display unassigned nodes then you would not be able to see them in the report.
If it is not set , then there are multiple ways of handling it.
- One is using authoirzations.
- Second is in the query local filter you can exclude it.(this can be viewed if required).
- Third is in the query global filter.If you exclude it in the global filter then you would not be able to see it in the report.

Similar Messages

BALANCE SHEET WITH UNASSIGNED NODES

First of all hello everybody,
In spite of being involved with balance sheet and P&L query I´m facing a problem never had before. We´re using the virtual infocube 0FIGL_V10 and its own query provided by Business Content.
Up to yesterday everything worked fine and showed up balance sheet and its nodes properly according to report in ECC. FI consultants decided to make changes in Balance Structure and turned on both credit and debit indicators in a couple of nodes. From then on relationed accounts did not appear within balance sheet but below unassigned nodes, obviously it should work properly once updated data by means of signs and so on. I removed content and reload 0GLACCEXT (its hierarchy), 0GL_ACCOUNT and infocube 0FIGL_C10 and kept failing.
Even i checked if function module supported by 0FIGL_V10 was modified and not at all.
Does anyone know what´s wrong? Is a problem of ECC customizing (don´t think so but...)? Am i missing any step?
Any suggestion would be appreciated...
Thanks in advace.

Thanks for your replies!
Simon you were right. By checking up 0BAL_DEPEND I found out that someone had disabled certain mapped fields in transfer rules...one of them was PLUMI -> 0BAL_DEPEND.
I found an article about an balance sheet sample with this field but i didn´t pay attention to.
I shall activate transfer rules and so on from BC again and hope solving it.
Thanks again.

How to do authorizations on unassigned nodes for hierarchies

Hi,
Is there a white paper from SAP that shows how to do authorizations for unassigned nodes for the hierarchies? Or has anyone completed this challenge and would be willing to share their approach and strategy?
Thanks
Will

Hi Ashwin,
The characteristics are 0COSTCENTER and ZDEPT. The Hierarchy structure should be
-Test Hierarchy
--Cost center 1
---Dept1
---Dept2
---Dept3
--Cost center 2
---Dept4
---Dept5
---Dept6
--Cost center 3
---Dept7
---Dept8
---Dept9
Etc.
We have transaction data where a certain Cost center doesn't have the department and when displaying the hierarchy there would be some unassigned nodes for the BW report.
What would happen if the following hierarchy is in place and I am trying to do authorizations for the 0COSTCENTER and ZDEPT:
-Test Hierarchy
--Cost center 1
---Dept1
---Dept2
---Dept3
--Cost center 2
---Dept4
---Dept5
---Dept6
--Cost center 3
Where cost center 3 has no department for it?
Thanks and regards
Will

Unassigned node in BW Hierarchies

We have multiple profit center hierarchies and one of them (say PC1) deliberately excludes a lot of profit centers (it includes only 20% of the total profit centers). In the report, the user is given an option to choose any one of the hierarchies. If the user chooses PC1, then the report shows a big chunk of data appearing under "unassigned node" as one would expect. One can go to the filter value to remove this "unassigned node", but is there any setting that prevents this "unassigned node" to show up in the first place?
The R/3 reports that uses this profit center wouldn't show anything like "unassigned node", it just shows the nodes that are in PC1. BW reports should be at least as flexible as R/3 reports right?! Could someone please comment? Thanks.
Sam

Hi,
Have you defined any connversion routine in the maintenance screen of that Info object ?
If you have not taken any CR , take 'AlPHA' as the conversion routine fot this Object. And then upload the hierarchy.
In the note: 447341,
take a lok on the
<i>1.2 Possible symptoms with inconsistencies</i>
3rd point.
With rgds,
Anil Kumar Sharma .P

Unassigned nodes in the Stock report

Dear Gurus,
                 We designed a "Stock Overview Report -Vendor wise".Now,we got 2 issues.The report output is as follows:
<b>Vendor   Batchno.   MaterialNo.    0quantityTotalStock</b>
    ABC       HA123      MAT001        -20
                  HB124      MAT002        -10
Unassigned HC120      MAT003         40
                                  RESULT        10.
Checked in MB5B,for each material and the values(-ve stock and Unassigned stock)eg..(-10+40=30),values are right.
<b>Issue1</b>
    Why do i get these Negative Values for stock against Vendor,whereas there's no Negative values against Unassgned??
<b> Issue2</b>
      Client(SAP Consultant aswell)! doesnt want the "Unassigned"node and goes on to say that the report is wrong ,if Unassigned gets displayed!!
Am really stuck up with this for more than 2weeks,still unable to move ahead.Any Light on this would be really appreciative.
Manythanks

No Solution

How to move the process chain from Unassigned node to a new node in 3.5?

Hi all,
I have created a new process chain in the development and it is falling under the Unassigned nodes. I want to move that process chain to an another node. but i am unable to do that
Can anyone let me know how to move the process chain from unassigned node. I have drag and dropped but still the same in BW 3.5 ?
Thanks
Poooja

Hello,
Try this....
Double click on your process chain. Via the menu select:
Process chain > Attributes > Display components
Select F4 (possible entries)
At the bottom of the window you will find a create icon
to make your own component.
After you created it, assign it to your process chain.
Don't forget to save the process chain.
Regards,
Sivaram

Unassigned nodes in Modeling

I have just installed a couple of queries from BC. The objects were assigned to the "Unassigned Nodes" tree. Why does that happen?
I don't have a CRM tree yet, so I don't know where they should be assigned. Does anybody know how I can determine which tree they should be assigned to?

Stuart,
Queries sit on an InfoProvider. Each InfoProvider sits in turn on an InfoArea.
If you have just activated business content and the InfoArea was not activated, the InfoProvider would go sit under unassigned nodes.
If it is an InfoCube, check in table RSDCUBE for the InfoArea.
Cheers
Aneesh

On Glyph palette name shows as unassigned

Hey guys, I've added some glyphs to one or our existing fonts and on the glyphs palette in InDesign CS3 that glyph's name shows as "unassigned" when I mouse over the glyph.
Typically I use the Adobe glyph list (http://www.adobe.com/devnet-archive/opentype/archives/glyphlist.txt) to name my glyphs, but this particular glyph isn't in that list.
Does anyone know whether the "unassigned" just means that InDesign doesn't recognize it because it's not in Adobe's list?
Thanks!

Hi Steve,
Sorry, I some how managed to miss your post! Thanks for taking interest.
We develop and maintain fonts for a couple of clients and they recently came up with some new Old English stuff that just isn't anywhere.
Ken

How to avoid showing extra accessor nodes in "af:tree" component?

I work with with JDev 11.1.2.3. (ADF BC, ADF Faces stack)
I have a data structure that is hierarchical (table references itself), and another table that referneces first one.
First table contains names of containers (container can be in another container), and second table holds contents of containers.
I want to create tree that shows data from both tables.
When I create tree binding I have two accessors for first table, one with which table references itself and another accessor with which second table references the first one.
Because of that in rendered tree under each node which represents first table's row I get two extra nodes (one for each accessor).
Is it possible not to show those extra nodes but that everything is packed under the same hierarchy?
Best regards,
Nebojsa

The logic here is pretty similar to the one with folders and files. Folders are container types and files are just leaf nodes (can't contain other files).
I don't want under each folder node to have two new container nodes - one that hold other subfolders, and another one that hold just files. And that's just what I get now.
How to avoid that?
Anybody?

Installer is not showing the correct Nodes in RAC

Hi Experts,
We are in the process of upgrade oracle database from 9.2.0.3 to 9.2.0.8 in RAC. While installing the 9.2.0.8 patch set it is not showing the correct database nodes, instead of it showing production database nodes, but we are doing doing it in test machine.
Test Machine hostname:
db1
db2
Prod machine hostname
prod1
prod2
it showing the prod1 and prod2 only.
please suggest us to solve this
Note:
We copy the oracle_home from prod to test for test database cloning.
Thanks
R.Sundaravel

Then it is highly likely your RAC cluster is not correctly configured.
Open an SR at metalink as the Cluster Verify tool does not exist for your old version.

Moving of the Infoobjects from Unassigned nodes to Custom Created Nodes

Hello Experts.
How to move the infoobjects from unassigned nodes to custom created nodes in RSA1.
Thanks
PT

Hi ,
Goto RSD1 ->info object catalog -> enter catalog name -> edit -> insert your info objects under "characteristic" folder.
Hope this may be the easier way.
Regards,
Swarupa.

Urgent: Suppressing unwanted Node Line in the target file

Hi all ,
I am doing simple file to file scenario in which i have following as my target structure.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_IN007_IN xmlns:ns0="Http://xyz.pi.com/OTC/IN007_ABC_PQR">
   <OUTPUT>
      <HEADER>
         <ShipmentDate/>
         <FROMCompund/>
         <TOCompound/>
         <ShipmentNumber/>
         <Carrier/>
         <TruckNumber/>
         <TrailerId/>
         <ContainerCount/>
         <TotalNetWeight/>
         <OwnerId/>
      </HEADER>
      <DELIVERY>
                 <DeliveryNo/>
      </DELIVERY>
      <DETAILS>
         <TransactionType/>
         <ContainerNo/>
         <CheckDigit/>
         <Condition/>
         <RJRGrade/>
         <Belt/>
         <CropYear/>
         <Processor/>
         <ContainerNetWeight/>
         <ContainerType/>
         <ProductionDate/>
         <ProductionTime/>
         <ProcessorBaleId/>
         <DealerContainerId/>
         <CustomerPackageId/>
      </DETAILS>
   </OUTPUT>
</ns0:MT_IN007_IN>
I am using Delivery node for generating file with the name in its subfield Delivery_No with the help of variable substitution. I dont want the Delivery node to be appearing in my output file,so i am suppressing it in my communication channel as shown below:
OUTPUT.fieldFixedLengths    161
OUTPUT.fieldSeparator          'nl'
HEADER.fieldFixedLengths    8,4,4,2,15,15,15,3,5,1,3
HEADER.endSeparator          'nl'
DELIVERY.fieldFixedLengths 0
DELIVERY.fixedLengthTooShortHandling   Cut
DETAILS.fieldFixedLengths      1,8,1,3,10,2,4,3,4,1,8,6,14,6,15
DETAILS.endSeparator             'nl'
In the Output file I am not getting the delivery node but a line break for it which i dont want to be there.I can't even change the structure so dat line break comes at the end.
Please help
Thanks in Advance,
Amit

Hi Swaroop,
I tried putting the null value as you mentioned but it didnot work, it is giving me now following error in AUDIT LOG in message monitoring :
File adapter receiver channel CC_IN007_OUT is not initialized. Unable to proceed: null
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages.
I only put the field seperator in my delivery node and removed fieldFixedLength parameters from it as below :
DELIVERY.fieldSeperator      '0x0D''0x0A'
Please help.
Thanks,
Amit

EAS does not show Business Rules node

I'm in the process of validating an 11.1.2 Planning installation. This is the development environment, so one Essbase server, one everything else server.
One of the issues I've run across is that my client install of EAS does not have a Business Rules node (I am staying away from Calculation Manager because of multiple horror stories from multiple sources I have heard about it).
However, it does show up in the launched-from-the-web version.
The web launched release numbers are:
EAS 11.1.2.0.00.462
APS 11.1.2.0.0.615
HBR 11.1.2.0.0.722
And now this gets really weird. The client launched release numbers are:
EAS 11.1.1.2.0.00.462
APS 11.1..2.0.0.615
HBR *4.1.1*
Somehow my clean install has magically gotten the last release of Planning 4's Business Rules?
It sure sounds like something didn't get installed correctly. I was able to find this thread regarding the same problem:
How to add HBR plugin in EAS console
In that thread, RahulS wrote:
To sort this out give a try to copy common/log4j folder from the sever to the client or install the Integration Services Client on the machine where the Administration Services Console is installed.Unfortunately, there are multiple log4j folders and none (that I can see) that have a parent of common. Can anyone give me some guidance as to if this is a good solution and if so, a better hint as to what log4j folder I should grab?
Thanks,
Cameron Lackpour
P.S. I found the install log for EAS and found two errors at the end of the install process, but I believe these are related to writing an icon to the desktop. This doesn't surprise me as this Vista laptop is locked down tight.
Apr 13, 2011 11:00:02 PM), Install, com.installshield.product.actions.DesktopIcon, err, ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
STACK_TRACE: 22
ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Native Method)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.desktop.GenericDesktopService.createDesktopItem(Unknown Source)
     at com.installshield.product.actions.DesktopIcon.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:2969)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:8048)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:7199)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:5240)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:619)
(Apr 13, 2011 11:00:02 PM), Install, com.installshield.product.actions.DesktopIcon, err, ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
STACK_TRACE: 22
ServiceException: (error code = -80002; message = "Access is denied.
(2147942405)"; severity = 0)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Native Method)
     at com.installshield.wizard.platform.win32.Win32DesktopServiceImpl.createDesktopItem(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.desktop.GenericDesktopService.createDesktopItem(Unknown Source)
     at com.installshield.product.actions.DesktopIcon.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:2969)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:8048)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:7199)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:5240)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:619)P.P.S. In the easconsole-move-hbrcfile-frtemp-stderr.log file, I see the following error:
The system cannot find the file specified.This sort of suggests that indeed something died on install.
Edited by: CL on Apr 14, 2011 2:36 PM
Edited to clean up RahulS' quote.
Edited by: CL on Apr 14, 2011 3:50 PM
Error file contents added

There you go I was on the right track, who needs oracle support :)^^^Isn't this board a sort of unofficial Oracle support? I have to admit that after my first fruitless search of the KB on support.oracle.com, I purposely came here first before I had the client log a SR.
That's wrong, of course, or at least a little illogical, given that the customer pays for support and after all, answering these kinds of questions is sort of their primary job. Putting on my ODTUG hat, KScope 2011 is going to have a support symposium that is going to focus on process (like why is Cameron so brain-dead that he can't type 'EAS and node' into the KB search field which pops up the obvious answer?) so that people don't do a time waster like I just did. It's going to have some pretty big names and I hope you all can come.
I'm going to forward this thread to my contact at Oracle support as evidence that even "intelligent" people could use some help with how to do searches, no matter how elementary that may be.
Regards,
Cameron Lackpour
P.S. If I could make the background of this post have a color, it would be blush pink, to match the tenor of my cheeks. I can be a total idiot some times. Thanks John and Rahul.

Af:tree inside af:accordion is not showing all the nodes

Hi All,
I am using Oracle JDeveloper 11g Release 2.
I have af:tree enclosed inside af:panelStretchLayout, displaying data from database table. af:tree is not displaying all data(nodes) in the space available to it. It is hiding the data at middle. I have tried number of options but in vein. The code is given below:
<af:panelAccordion id="pa1">
                                <af:showDetailItem text="Browse Course Categories" id="sdi1" icon="/Images/tree.png">
                                    *<af:panelStretchLayout id="psl112">*
                                        *<f:facet name="center">*
                                            <af:tree value="#{bindings.BaseCourseCategories1.treeModel}" var="node"
                                                     selectionListener="#{bindings.BaseCourseCategories1.treeModel.makeCurrent}"
                                                     rowSelection="single" id="t3" *styleClass="AFStretchWidth"*>
                                                <f:facet name="nodeStamp">
                                                    <af:outputText value="#{node.CategoryTitle}" id="ot4"/>
                                                </f:facet>
                                                <f:facet name="contextMenu">
                                                    <af:popup childCreation="deferred" autoCancel="disabled" id="p1">
                                                        <af:menu text="Course Categories" id="m1">
                                                            <af:commandMenuItem text="Show Categories" id="cmi1"
                                                                                actionListener="#{SelectAllCategoryBean.refreshChildCategories}"
                                                                                action="refresh">
                                                                <f:attribute name="CategoryId"
                                                                             value="#{node.CategoryId}"/>
                                                            </af:commandMenuItem>
                                                            <af:commandMenuItem id="cmi2" text="Add Category"
                                                                                action="goCreateCourseCats"/>
                                                        </af:menu>
                                                    </af:popup>
                                                </f:facet>
                                            </af:tree>
                                        </f:facet>
                                    </af:panelStretchLayout>
                                </af:showDetailItem>
                            </af:panelAccordion>Any guidance or help....
Thanks in advance
Bilal

Hi Peter,
I have checked for stretchChildren="first" property of af:panelAccordion, but didn,t found.
Thanks for response.
Regards
Bilal

Drag and Drop in JTree / Show line between Nodes as DropTarget

Hello folks,
I am using the posted DnDTree.
My problem is to show a line between two nodes when I am drgging another node over them.
The idea is to have the posibility to sort nodes in the same level.
Has anybody an idea how to solve that?
Thanks and best reards,
Florian

"My problem is to show a line between two nodes when I am drgging another node over them."
Try this dragOver method:
public void dragOver(DropTargetDragEvent dtde) {
Point p = dtde.getLocation();
int closestRow = getClosestRowForLocation(p.x, p.y);
Graphics g = getGraphics();
try {
if (closestRow != -1) {
DnDNode node =(DnDNode)getPathForRow(closestRow).getLastPathComponent();
Rectangle r = getRowBounds(closestRow);
g.setXORMode(getBackground());
if (p.y >= r.y && p.y <= r.y + r.height) {
dtde.acceptDrag(DnDConstants.ACTION_COPY_OR_MOVE);
drawNewLine = false;
drawNewRectangle = false;
if (!node.getAllowsChildren() && ((r.x != x1 || r.y + r.height != y1) || rectangleDrawn)) {
drawNewLine = true;
parentNode = (DnDNode) node.getParent();
index = parentNode.getIndex(node) + 1;
} else if (node.getAllowsChildren()) {
if ((isCollapsed(closestRow) || (isExpanded(closestRow) && node.getChildCount() == 0)) && (rectangleDrawn || (!lineDrawn && !rectangleDrawn)) && p.y > r.y + r.height - 5) {
drawNewLine = true;
parentNode = (DnDNode) node.getParent();
index = parentNode.getIndex(node) + 1;
} else if ((lineDrawn && p.y <= r.y + r.height - 5) || ((rectangleDrawn || (!lineDrawn && !rectangleDrawn)) && (r.x != x || r.y != y))) {
drawNewRectangle = true;
parentNode = node;
index = 0;
// Marks where the drop will occur
if (drawNewLine || drawNewRectangle) {
if (lineDrawn) {
g.drawLine(x1, y1, x2, y2);
lineDrawn = false;
if (rectangleDrawn) {
g.drawRect(x, y, w, h);
rectangleDrawn = false;
if (drawNewLine) {
x1 = r.x;
y1 = r.y + r.height;
x2 = getWidth() - 5;
y2 = r.y + r.height;
g.drawLine(x1, y1, x2, y2);
lineDrawn = true;
if (drawNewRectangle) {
x = r.x;
y = r.y;
w = getWidth() - r.x - 5;
h = r.height - 1;
g.drawRect(x, y, w, h);
rectangleDrawn = true;
} else {
dtde.rejectDrag();
index = -1;
if (lineDrawn) {
g.drawLine(x1, y1, x2, y2);
x1 = -1;
y1 = -1;
lineDrawn = false;
if (rectangleDrawn) {
g.drawRect(x, y, w, h);
x = -1;
y = -1;
rectangleDrawn = false;
} finally {
g.dispose();
Hope this works for you...
Good luck
/Tomas

Show suppressed unassigned nodes in Hierachy

Similar Messages

Maybe you are looking for