Show tech for 4000 series switch

All,
The issue is i have widespread network connectivity problems that seem to be pointing to a switching situation. Our SQL connectivity to 2 highly visible and mission critical applications are seeing hiccups which are basically screwing up data. I think i see some things but i want to get some other feedback.
A few tidbits of information: the counters were cleared a week or two ago.
Should the CPU utilization be this high on a 4000 series without seeing performance degradation as well?
Regards,
Nate

Nate,
From my experience your CPU utilization doesn't look out of line. This document can help you troubleshoot high CPU usage.
http://www.cisco.com/warp/public/473/82.html
Also, what interface(s) are the systems connected to? Because I would look at the speed/duplex on both the switchport and the end device(s). Here's another Cisco document to help you.
http://www.cisco.com/warp/public/473/46.html
Steve

Similar Messages

  • Show DataTips for each series

    Is there a way to customize the DataTips for each series in a
    chart? I have a column chart that has a line series in it. The
    columns display actual data, but the line shows an average.
    Currently the datatips are set to show the column chart values,
    even when a user hovers over a line chart datatip. Is there any way
    to have the datatips for the lineseries display the lineseries
    data?
    I know I could create a DataTipFormatter that included both
    the column data and the line data at the same time, but I would
    like them separate.

    Adobe Newsbot hopes that the following resources helps you.
    NewsBot is experimental and any feedback (reply to this post) on
    its utility will be appreciated:
    L (Flex 3):
    The LineChart control represents a data series as points
    connected by a continuous .... whose contents are highlighted when
    a user moves the mouse over it.
    Link:
    http://livedocs.adobe.com/flex/3/langref/all-index-L.html
    Is it possible to use data labels with line chart? - Flex
    India:
    Feb 27, 2008 ... I want to create a line chart which shows
    all the labels, regardless of the mouse pointer.
    showAllDataTips=true works but the result is
    Link:
    http://groups.google.com/group/flex_india/browse_thread/thread/709c9651ad7c9062
    mx.charts.LineChart (Flex 2.0.1 Language Reference):
    Specifies the distance, in pixels, that Flex considers a data
    point to be under the mouse pointer when the mouse moves around a
    chart.
    Link:
    http://livedocs.adobe.com/flex/201/langref/mx/charts/LineChart.html
    Print Page - Disable datatip but keep mouse event on line
    chart:
    Flex and ActionScript 3.0 => Flex Charting => Topic
    started by: Sablotron on 29 July 2008, ... Title: Disable datatip
    but keep mouse event on line chart
    Link:
    http://www.flexdeveloper.eu/forums/index.php?action=printpage;topic=895.0
    [#FLEXDMV-1683] dataTipFunction for LineChart is not executed
    when:
    Mar 12, 2008 ... Set dataProvider for LineChart with one
    datapoint 3. Set a dataTipFunction for the LineChart Actual
    Results: Datatip does not show on mouse
    Link:
    http://bugs.adobe.com/jira/browse/FLEXDMV-1683
    Disable datatip but keep mouse event on line chart |
    flexdeveloper:
    Aug 6, 2008 ... Disable datatip but keep mouse event on line
    chart, help forums for developers working with ActionScript 3.0,
    Flex 3, Flash CS3.0, and AIR.
    Link:
    http://www.flexdeveloper.eu/forums/index.php?topic=895.msg2716
    Disclaimer: This response is generated automatically by the
    Adobe NewsBot based on Adobe
    Community
    Engine.

  • Need rack ears for SR224 series switch. Please help.

    I need a pair of rack ears for an SR224 series switch. (11-inch wide chassis)
    Please direct me to a part-number and a source.
    Thank you!

    You have posted exactly the same question on the WAN Routing and Switching forum where it has already gotten some response. I suggest that we consolidate any discussion to that forum.
    HTH
    Rick

  • Increasing TFTP block size for 2960 series switches

    I have read that some Cisco components can increase the default TFTP block size to values greater than 512 bytes by using the command -
    ip tftp blocksize xxxx
    This doesn't seem to be available on Cisco 2960 series switches. Is there a way to do this with the 2960's?

    I have moved a WS-C2960-24LC-S running LanLite to 12.2(55)SE9 - the current end of the line for this switch - and indeed the command is not present. Sooo....this appears to be a limitation of LanLite.
    My predecessor implemented about 70 switches with LanLite. I put a stop to this about a year ago but it is going to take some time to flush them out of the inventory.
    Thanks for your response.

  • Firmware upgrade question for 300 series switches

    Hi-
    I have a customer that is investigating a strategy and solution for centralized firmware management of the 300 series switches.  They have found an issue in the lab where they were trying to roll back the firmware to a previous version  They can not roll back to the previous firmware version, which is desirable in the case of finding an issue in the new firmware that causes them to have need to rollback to a known working version.
    We have read in the cisco 300 switch admin guide that there are two images (active and inactive) and that a new downloaded firmware always replaces the inactive image and is active until explicitly set.  The admin guide does not mention inability to make an older firmware image as active image when the switch has previously run on a new release firmware image.  My customer's engineers testing have informed me that an older image can not be made active after a newer image has booted.  Can you please verify if this if a fallback is supposed to work as it is causing a lot of concern-
    Thanks-
    Jena

    Jena,
    The release notes -
    http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/release_notes/Sx200-Sx300_R1.1.2.x.pdf
    What firmware is the switches currently on?
    Major Changes and Defects Corrected
    • Hardware version 1.0 devices that were upgraded to software version 1.1
    can now be downgraded to software version 1.0. You must delete the
    startup configuration file before rebooting the device to software version
    1.0. Otherwise the device may have problems when booting up. You may
    backup your running configuration before the reboot, and re-import the
    configuration afterward. Major Changes and Defects Corrected
    • Hardware version 1.0 devices that were upgraded to software version 1.1
    can now be downgraded to software version 1.0. You must delete the
    startup configuration file before rebooting the device to software version
    1.0. Otherwise the device may have problems when booting up. You may
    backup your running configuration before the reboot, and re-import the
    configuration afterward.
    Please read full release notes for other work arounds
    Hope this helps,
    Jasbryan

  • Switch support for NAC CCA for 6500 series switch

    per the 4.0 document "switch support for Cisco NAC" there is a note that says
    Catalyst 6000/6500 on IOS do not support mac-notification
    Does this mean you cannot deploy layer 2 OOB mode, as snmp notification to the CAM will not happen with the 6k platform?

    Probably, the configuration guide will give you better idea about your problem.
    http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_book09186a00803f5611.html

  • What are the New IOS Versions available for 2960 series Switches?

    Hi all,
    can anybody give the details about it?
    thanks,
    Haribabu.

    15.0(1)SE is the latest-and-greatest IOS.  Unfortunately, I personally wouldn't recommend this to anyone because this version has a memory leak that affects switches even before configs are loaded.
    Next is the 12.2(58)SE2.  This is so-so.  The earlier version has a memory leak similar (not the same) as the 15.0(1)SE but it is triggered differently.
    12.2(55)SE4 is probably the most stable of the "new" versions. 

  • Why don't Verizon service techs show up for promised service appointmen​ts?

    I have not had a dial tone on my landline phone for over two weeks so I made an appointment for a service tech to come today to fix my phone--it was the earliest appointment I could get.  I was told that the Verizon tech would come between 8 a.m. and 12 noon.  As I work during the week, I had to take off the day from work to be home for the service call.  Two days ago, I got a call on my cell phone  from a real person at Verizon confirming that I would be home today for the service tech.  Yesterday, I got an automated phone call confirming thatthe tech would be coming today between 8 a.m. and 12 noon and confirming that I would be home.  At 10:00 a.m. today, I got a text message on my cell phone stating that the service tech would arrive before 12 noon.  When he did not show by 1:30 p.m., I called Verizon and after 15 minutesof  trying to get a real person on line I was told that the service tech would not be coming after all!!   No apology was offered for my inconvenience.  Another appointment was made for tomorrow (when I can't be home) to check my outside line, but if that does not fix  the problem, what am I supposed to do?   This is the worst cucstomer service problem I have ever experienced.  I had been thinking of switching from Comcast to Verizon FIOS, but if this is the kind of "customer service" I can expect from Verizon, then I would have to have my head examined to make a switch.  At least Comcast comes out when they say they will.

    I scheduled an appointment from 8-12, took off from work and waited.  Technician was a no show.  I never received a call or text to tell me they were not coming.  Called Verizon - they said one might show up at 4:00 PM.  I went to work.  Technician arrived at 7 PM.  Phone worked for three days and then broke again.
    I scheduled an appointment from 8-12 on a Saturday and waited.  Technician was a no show.   I never received a call or text to tell me they were not coming.  Called Verizon - they said my appointment was postponed until the next day - they just never told me.
    I waited the next day.  Technician was a no show.  Why call?  They will show up when they want to and could care less about wasting customers time.  So I will wait...
    This company clearly needs some competition to get them to start listening to customers.  If I didn't show up for work for three days and did not call, I would be fired.  Think about that, Verizon.

  • How to backup a "show tech" and a "running config" from MDS switches

    hi, guys
    I am a newbie of MDS switches.
    but I got a request this week asking me to actively backup a "show tech" and a "running config" from the MDS switches........
    so my questions are:
    1) if I want to back up MDS configurations, which commnds should I run? or just "show tech" is enough?
    2) is the MDS itself have the backup function? for example can ftp the configuration to someplace?
    please help point me the right direction or is there any official referece docs I can refer to ?
    thanks in advance!!!

    tftp worked for me but not ftp. My ftp requires a password and I don't know how to send it via scheduler job.
    Worked:
    scheduler job name BkupConfig
      copy running-config startup-config
      copy startup-config tftp://10.1.1.1/MDS_Bkup/DowMDS$(TIMESTAMP).txt
    scheduler schedule name Weekly_5am
      job name BkupConfig
      time weekly 01:05:00
    FAILED FTP:
    Job Name       : test                              Job Status: Success (0)
    Schedule Name  : test                              User Name : user
    Completion time: Thu Sep  5 11:08:41 2013
    --------------------------------- Job Output ---------------------------------
    `copy running-config startup-config`
    [###                                     ]   6%
    [######                                  ]  12%
    [########                                ]  19%
    [###########                             ]  25%
    [##############                          ]  32%
    [################                        ]  39%
    [###################                     ]  45%
    [######################                  ]  51%
    [########################                ]  59%
    [###########################             ]  65%
    [#############################           ]  71%
    [################################        ]  79%
    [###################################     ]  85%
    [#####################################   ]  91%
    [########################################]  98%
    [########################################] 100%
    Copy complete, now saving to disk (please wait)...
    `copy startup-config
    ftp://[email protected]/MDS_Bkup/DowMDS2013-09-05-10.53.05.txt
    `
    Password: Login failed.

  • Is it possible to limit the output of "show tech-support" to the data from a single switch in a cluster?

    I need to provide the output for one 3750x switch out of a cluster of 7.
    With all of the various stats, the entire log will be fairly large.

    From the master switch open a session to that switch and than run "sh tech-support"
    session 7
    sh tech
    HTH

  • TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

    Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

    Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
    By the way, it might help if you indicated where you are located.
    To complain to Apple use http://www.apple.com/feedback/ipad.html

  • HT201263 iphone only shows logo for 13 seconds when connected to pc thats all it does however i connected to wall socket it goes up to connect to itunes but when i unplug it then it switches off

    iphone only shows logo for 13 seconds when connected to pc thats all it does however i connected to wall socket, it goes up to connect to itunes but when i unplug it then it switches off.
    this is coincidently after an ios update for iphone which i did just approx two days earlier which was suppused to fix battery issues?
    also battery shows 100 percent full but as i explained if disconected from socket it switches off altogether.

    Hopefully and most likely faulty battery. If you have Warranty or AppleCare, make Genius reservation and take to Apple for resolution.

  • I need online Configuration Guide for Catalyst Express 500 Series Switches

    Hi Mates,
    Please is there an online help page for 500 series catalyst
    I have this one for IOS 12.2(25)FY http://www.cisco.com/en/US/products/ps6545/products_configuration_example09186a00806da6c9.shtml
    but I need more detailes like IOS 12.3(7)JA for Aironet 1300 http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_book09186a00804ebd50.html
    Regards
    Saher

    I'm afraid there is not such document for IOS 12.2(25)FY since the Catalyst Express 500 Series switches are manageable through the GUI Device Manager or Cisco Network Assistant.
    I have also found key features and standards supported for that release:
    http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/prod_bulletin0900aecd8033b8b3.html
    Hope this helps

  • TS4268 I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activati

    I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activation' I've done the the resets and followed the instructions from the Apple Help page but still can't get it to switch on??

    If you say you have done everything in this article: http://support.apple.com/kb/ts4268, then you should probably contact your carrier for their advice.

  • I had purchased and downloaded a tv series to my ipad. Then deleted it due to space constraints. Now I wanted to download it permanently to my MacBook but itunes does not show this  purchases. It worked, however, for another series. What can I do?

    I had purchased and downloaded a tv series to my ipad. Then deleted it due to space constraints. Now I wanted to download it permanently to my MacBook but itunes does not show this  purchases. It worked, however, for another series. What can I do?
    Thanks for any help!

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
    If you haven't synced to a computer them (from here) :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

Maybe you are looking for