Show text box from one combo box selection
Total newb here and need help. I tried searching for a javascript to copy/paste, but without any luck. I am using Acrobat Pro 9.2.0. If you could help me out with the javascript or with directions on how to make the following be accomplished, I would be greatly appreciative.
I am creating a fillable PDF and currently have a combo box that is labeled "Internship Satisfied By" with the options of "TCoB PDP", "MRKTNG 4185", and "Other College". I would like a hidden text box (where the end user can fill in to explain) to become visible only when the end user selects the "Other College" option, but stay hidden for the other selections. The hidden text box is labeled "Internship Explained".
Thanks in advance! Jarrod
Use this code as the combo box's validation script:
if (event.value == "Other College") {
getField("Internship Explained").display = display.visible;
} else {
getField("Internship Explained").display = display.hidden;
Similar Messages
-
For example:
Combo box choices:
apple
tomato
squash
Pumpkin
The text box depending on the selection above would state the color:
Green (if Apple was chosen from the combo box
Red (if Tomato was chosen from the combo box
Yellow (if Squash was chosen from the combo box
Orange (if Pumpkin was chosen from the combo box
I am very new at this and have spent hours looking for an answer. Thank to anyone in advance who can help!Place each value as the export value of the options in the combo-box and then use this code as the text field's custom calculation script:
event.value = this.getField("ComboBox Name").value; -
Is there a way to copy text boxes from one pdf file to a different one?
is there a way to copy text boxes from one pdf file to a different one in Acrobat 11?
Yes. In Form Edit mode select the field(s), press Ctrl+C and then move to
the other file and press Ctrl+V. -
Dynamically change the contents of one combo box based on the other
Hi Forum,
I have a question which might have a possibly simple answer. Well anyway help me out since i could not find the simple answer.
I am building an application using Swing and binding with BC4J using JClient. My GUI has combo boxes, grids, editboxes. My requirement is that i should be able to dynamically change the contents of one combo box based on the selected item in trhe previous combo box. For example, when i choose a country in the "country combo box", the "states combo box" should show the list of the states of the selected country.
Now how do i do this using binding. If not, how do i write custom querirs in BC4J layer and return a resultset to the remote application so theat i can populate the dependent combo boxes.
I will appreciate if anyone can help me out in this regard.
Thank You
Sumitthere could be quite a few number of ways of solving this problem.
One way is through event handlers.
taking your example as a model when user selects a country you could fire an action with a flag set to ture. A method will return the states from the DB or your temporary files or what ever and then the true flag will be used in the states combo box rendering.
other way: javascript
this might be a bit clumsy as you will need the states information in a property file and you can get the info as the user selects a country.
regards,
raj -
Sending mail from one sap box to other sap box
how to send mail from one sap box to other sap box?
Hi Pavan,
To send mail Internally check this sample code.
*& Report ZMATURITYREPORT *
*& Title - Maturity report *
*& Module - FI *
REPORT ZMATURITYREPORT.
tables: bseg.
SELECTION SCREEN--------------------------------------------------- *
parameters: p_email type somlreci1-receiver default
'<b><email_removed_by_moderator></b>.
Data: p_email(25) type c value <b><hardcoding_removed_by_moderator></b>.
END OF SELECTION SCREEN ------------------------------------------- *
--DATA DECLARATION--
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_message1 type standard table of solisti1 initial size 0
with header line.
data: it_message2(10) type N.
data: it_message3 type standard table of solisti1 initial size 0
with header line.
data: it_message4 type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: text(150).
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,
gd_error type sy-subrc,
gd_reciever type sy-subrc.
start-of-selection.
data: lv_date type sy-datum.
data: lv_date1 type sy-datum.
data: lv_formatdate(10) type c.
data: lv_formatdate1(10) type c.
data: var1(4) type c,
var2(2) type c,
var3(2) type c.
data: begin of int_bseg occurs 0,
BELNR LIKE BSEG-BELNR,
ZUONR LIKE BSEG-ZUONR,
GJAHR LIKE BSEG-GJAHR,
DMBTR LIKE BSEG-DMBTR,
HKONT LIKE BSEG-HKONT,
end of int_bseg.
data: begin of int_SKAT occurs 0,
TXT50 LIKE SKAT-TXT50,
SAKNR LIKE SKAT-SAKNR,
KTOPL LIKE SKAT-KTOPL,
end of int_SKAT.
data: begin of int_bkpf occurs 0,
BELNR LIKE BKPF-BELNR,
BUKRS LIKE BKPF-BUKRS,
GJAHR LIKE BKPF-GJAHR,
BUDAT LIKE BKPF-BUDAT,
end of int_BKPF.
data: 2days_out type sy-datum.
2days_out = sy-datum + 2.
data: var4(4) type c,
var5(2) type c,
var6(2) type c.
-- END OF DATA DECLARATION--
--- CONCATENATING AND ARRANGING DATE -
lv_date = 2days_out.
var1 = lv_date+(4).
var2 = lv_date+4(2).
var3 = lv_date+6(2).
concatenate var3 var2 var1 into lv_formatdate separated by '.'.
--- END OF CONCATENATING AND ARRANGING DATE -
--SELECTION FOR BSEG--
select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
corresponding fields of table int_bseg
where bukrs = 'company name' and
ZUONR = lv_formatdate.
*--END OF SSELECTION FOR BSEG--
--SELECTION FOR BKPF--
select BUDAT BUKRS BELNR GJAHR from BKPF into
corresponding fields of table int_BKPF
where bukrs = 'company name'.
append int_BKPF.
--END OF SELECTION FOR BKPF--
--SELECTION FOR SKAT--
select SAKNR TXT50 from SKAT into
corresponding fields of table int_SKAT
where KTOPL = 'company name'.
*and SAKNR = INT_BSEG-HKONT.
APPEND INT_SKAT.
*--END OF SSELECTION FOR SKAT--
----POPULATING EMAIL SUBJECT -
perform populate_email_message_body.
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Maturity after 2 days'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*endif.
end-of-selection.
----END OF POPULATING EMAIL SUBJECT -
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
object_header = t_object_header
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
loop at t_receivers.
ld_receiver = t_receivers-retrn_code.
endloop.
endform. "send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
refresh it_message.
refresh it_message1.
refresh it_message3.
refresh it_message4.
LOOP FOR BSEG -
loop at int_BSEG.
read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
GJAHR = INT_BSEG-GJAHR.
read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
*-CHANGING DATE FORMAT FOR BKPF--
lv_date1 = int_bkpf-budat.
var4 = lv_date1+(4).
var5 = lv_date1+4(2).
var6 = lv_date1+6(2).
concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
*-END OF CHANGING DATE FORMAT FOR BKPF--
it_message = int_bseg-belnr.
it_message1 = lv_formatdate1.
it_message2 = int_bseg-dmbtr.
it_message3 = int_bseg-hkont.
IT_MESSAGE4 = INT_SKAT-TXT50.
SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
POPULATING EMAIL BODY WITH DATA -
concatenate 'Maturity After 2Days' 'for' 'G/L account-' it_message3
'--' IT_MESSAGE4 ',' 'Amount-' it_message2
into it_message separated by space.
append it_message.
append it_message1.
append it_message3.
clear it_message.
clear it_message1.
clear it_message2.
clear it_message3.
endloop.
END OF LOOP FOR BSEG -
endform. " POPULATE_EMAIL_MESSAGE_BODY
To send an mail with external attachment check this one
first create a Include report with the following coding
*& Include ZPA1_INCLFOR_MAIL *
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
Then include that report in the following report and copy the same code and paste it there
*& Report ZPA_TEMP147 *
REPORT ZPA_TEMP147 .
INCLUDE zpa1_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
Check this sample report
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = '[email protected]'. "-->
EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Settings for sending mail
Configuring SAP 4.6x Internet mail Gateway
SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
Configuring outbound forwarding
SAP configuration
1. Create your RFC destination for outbound email using transaction SM59
RFC Destination : SAP_INTERNET_GATEWAY
Connection Type : T
Description : SAP internet mail gateway
Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
Program : /sapmnt/SID/exe/mlunxsnd
Target Host : Enter hostname that runs your central instance.
Click 'Test Connection' and you should seea successfull message.
2. Shared Office Settings transaction SO16-> Send -> Settings or
directly via transaction SCOT- SAPconnect Administation
Nodes - Create
Node : IMAIL
Description : SAP internet mail gateway
RFC Destination : SAP_INTERNET_GATEWAY
Tick : Internet
Address Area : *
Tick : All formats
Dev. type : Choose an approciate Printer Device
Set further addresstype : N
Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
Tick : Node is ready for use
Setting
- DefaultDomain : <your company domain>.com
- Conversionrule : require if your communication device only support one format.
e.g. if you email system only support the format RAW (ASCII text format)
Format To Format Ranking Function module
ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
Referto note 171698 - SAPconnect: Formats, conversion, device type
UNIX configuration
1 .. cd /sapmnt/SID/exe
2 ..csh
..mlsomadm mailgw.ini
System Name [C11] :
Client [000] :
Username : MAILADM
Password : MAILADM
Language : E
Load Balancing :
Hostname : <hostname>
System number : <instance_number>
Gateway hostname: <central_instance_hostname>
Gateway Service : <instance number>
Use SAP Router :
Trace level :
Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
Codepage [ISO-8859-1] :
Trace Level (Outbound) [0] :
Update file sapmailsid.cfg? [Y]
Testing whether your configuration is successful
1. Logon to SAP
2. Execute transaction SO01
3. Write a message and send it to <your_internet_email_address>
4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
1. Create
2. Position your cursor at INT
3. Click Schedule and supply the date and time
4. Click Schedule periodically and tick Minutes and type in 5
5. Click Create and you are done
6. Click Show Scheduling to check
Problems that you might encounter :-
If you have set up a node in SCOT and it tests out well but recieve the reply.
"Cannot process message in node, parameterscannot be converted".
Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
In SCOT (View -> System Status), your mail remains at the Intransit column.
Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
http://www.tamboly.com/SAPEmailConfiguration.html
Check my previous links
Mail Send
sending mails from abap program
Mail Sending to external email id's
settings needed for sending emails
<b><points_request_removed_by_moderator></b>
Cheers,
CHAITANYA. -
How to use one Combo Box to control Two spreadsheet/charts in Web Analysis
In Web Analysis panel, I have one data grid and one chart (two different data sources). I would like to have one combo box, e.g. Q1, Q2, Q3, Q4, in the selection (drop-down). When I select Q1, I would like to show Jan, Feb, Mar, Q1 ( ICHILDREN(Q1)) in my chart, and also only Q1 in my data grid.
Any suggestions?
ThanksI believe you can do this. For example you want to have a Chart and Graph linked to a drop down for products. When you select a product, the two POV's will change on the reports.
Look at Panels in WA. I create a report with three panels. Make the first panel top aligned, the second top aligned and the third stretched. This should make the report "stretchy". Then add your dropdown to one panel and your reports to the other two panels.
Finally link the reports to dropdown using the re-linking technique mentioned in the previous post.
Hope this helps.
Brian Chow -
How to make separate/individual text frame from one parent frame in indesign with javascript
Hi all,
Please suugest - how to make separate/individual text frame from one parent frame in indesign with javascript.
Thanks
Rohit@Larry – ah, your interpretation could be the right one…
May I rephrase the question:
"How to split threaded text frames to single ones?"
"SplitStory.jsx" or "BreakFrame.jsx" under Scripts/Samples indeed could be the answer.
From the comments in the code of "BreakFrame.jsx":
//Removes the selected text frame (or text frames) from the
//story containing the text frame and removes the text contained
//by the text frame from the story.
//If you want to split *all* of the text fames in the story, use the
//SplitStory.jsx script.
Uwe -
can i text international from one iphone to another iphone over wifi with other friends that have iPhones
who will be with us overseas?Yes, if you are provisioned by your carrier to do so. IF both phones are iphones with IOS 5.0 or higher then you can use imessage.
-
HT201269 How do I transfer my SMS text messages from one Iphone to another or to my Macbook Pro?
How do I transfer my SMS text messages from one Iphone to another or to my Macbook Pro?
Or you can be guided bt this 'officail' Apple support document:
http://support.apple.com/kb/PH4441
Ciao.
Csound 1 greetings: Nothing wrong with a little plagiarism. -
How can I make a form where text flows from one line to another?
I have created a fillable multi page form in Adobe Acrobat Pro XI. The form was originally created in InDesign, using lines for text. I saved as an interactive pdf, opened in Acrobat Pro, and created a form using the "Create Form" function. This worked great, but some parts of the form have multiple lines that need to be filled out, so the customer would continue typing and the type would flow from one line to the next. Right now the lines are individual fields. Can I easily convert these fields so that the text goes from one line to the next as the person filling out the form types?
Thank you for the help.The easiest way is to do a slight redesign to get rid of the lines and then use a multiline field instead of multiple single line fields. If you really need to have the lines, you can use an approach that's demonstrated in the following sample: https://workspaces.acrobat.com/?d=AG6oZ3bi3DYHokxDPeWN7A
You may come across attempts to use JavaScript to automatically move to the next field when the previous one is filled-up, but I've never seen this work very well. -
How do I force smart mailbox to only show me mail from one mailbox while also showing multiple senders?
It would help to post what you've tried. It does, indeed, appear that -h is the switch, and the man includes several examples, so if you've followed the examples and it's not working then that hints that you should pass it back to Apple.
You also don't say how you're implementing your change. Are you invoking slapd manually, or are you editing /System/Library/LaunchDaemons/org.openldap.slapd.plist ?
You should be doing the latter, and I'd expect to see something like this:
<array>
<string>/usr/libexec/slapd</string>
<string>-d</string>
<string>0</string>
<string>-h</string>
<string>ldap://x.x.x.20/ ldap://127.0.0.1/ ldapi://%2Fvar%2Frun%2Fldapi</string>
</array>
(note the inclusion of ldap://127.0.0.1/ as an entry - you'll need to run on localhost as well the .20 address since all the local services will look to localhost)
You might also need an ldaps URL if you're using SSL but let's walk before we try to run -
HT3529 easiest way to print out my text messages from one person
I would love to know the easiest way to print out my text messages from one person, how can I do that?
I just did the last IOS updated, I'm not sure the number after itPrinting from the iPhone either requires an AirPrint compatible printer, or an app from the App Store. You would have to search to see if they are free or cost. Also, the printing of text messages would either require you to make a screen shot of the message and to print that as a photo, or you would need a 3rd party software on the computer to copy the entire message to the computer and print from there. There is no native print capability for entire message threads.
-
I have lost all text messages from one number, is there a way I can retrieve. I have an iphone4
I have lost all of my text messages from one number, is there a way to retrieve?
Possibly. See the Manually Migrating section of Switch 101: Migrate your Windows files or system to your Mac.
The files already transferred are in a new user account created by Migration Asisstant. Log off; when you go to log back on, you should be prompted to enter a password for the new account. Then you should be able to manually move whatever didn't get copied. -
My bill show text messages from my cell number sent to my cell number what is that about
MMy bill shows text messages from my cell number sent to my number what does that mean
Jackie, this usually happens when the number that was texting you was blocked or unavailable. The billing system uses your own number as sort of a placeholder. It could be another reason, but as far as I know, that's the reason.
-
How do I populate one Combo box based on input from another
Hi,
I have a dynamic Combo box populated from a database. Now I want to use the onChanged event to dynamically populate a second combo box on the same page.
Any ideas on how to do this?
Robert
[email protected]Here is an example:
let us consider it not coming from the database:
<html>
<head>
<title>New Page 1</title>
<script>
function popSub()
var n = 1;
var mainValue;
mainValue = document.test.main.options[document.test.main.selectedIndex].value ;
if (mainValue=="Age" )
document.test.sub.options[n].value = 'below18';
document.test.sub.options[n].text = 'Below 18';
n = n + 1;
if (mainValue=="Age" )
document.test.sub.options[n].value = 'over18';
document.test.sub.options[n].text = 'Over 18';
n = n + 1;
if (mainValue=="Sex" )
document.test.sub.options[n].value = 'male';
document.test.sub.options[n].text = 'Male';
n = n + 1;
if (mainValue=="Sex" )
document.test.sub.options[n].value = 'female';
document.test.sub.options[n].text = 'Female';
n = n + 1;
</script>
</head>
<body>
<form method="POST" name="test">
<p><select size="1" name="main" onClick="popSub()">
<option value="Age">Age</option>
<option value="Sex">Sex</option>
<option selected>select one</option>
</select></p>
<p><select size="1" name="sub">
<option value=""></option>
<option value=""></option>
<option value=""></option>
</select></p>
<p><input type="submit" value="Submit" name="B1"><input type="reset" value="Reset" name="B2"></p>
</form>
</body>
</html>
If it coming from the database then you have to write the javascript function in jsp as follows:
out.println('<script language="JavaScript">');
out.println('function popSub()');
out.println('{');
out.println('var n = 1;');
out.println('var mainValue;');
out.println('mainValue = document.test.main.options[document.test.main.selectedIndex].value ;');
// start one for loop from 1 to record count
out.println('if (mainValue=="' + valuefrom the resultset + '")');
out.println('{');
out.println("document.test.sub.options[n].value = '" + value from the result set +"';");
out.println("document.test.sub.options[n].text = '"+value from the result set+"';");
out.println('n=n+1;');
out.println('}');
// end of the for loop
finish the javascript function using out.println
Maybe you are looking for
-
Hi friends, i have tried to install ms sql 2012 on windows 8.1 pro 64 bit but it got failed due to the following error 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support person
-
Reading in only part of an SQL query??
hi guys, I have some very big data sets I am going to be working with, some of my relations contain more than 300,000 entries. My GUI is such that I will only allow 100 entries MAX to be displayed at a time. But I was thinking, maybe there is a way w
-
DISPLAY COLUMN NO'S AND ROW NO'S IN SMARTFORMS
HI ALL, I M HAVING REQUIRMENT TO DISPLAY COLUMN NUMBERS AND ROW NO'S IN SMARTFORM I'M NEW TO THIS PLS SUGGEST ME. THANK YOU ALL IN ADVANCE. Moderator message: please search for information and try yourself before asking, do not post in all upper case
-
I had this same issue with Seamonkey. I have about 4700 names in my address book. When replying to an email, or creating a new email, the auto email lookup function is very slow and unresponsive. It will generally take 10-20 seconds before it starts
-
SDO_RELATE does not return expected points
Hi, I have a problem with a query which does not return the results I am expecting. I think it may be to do with geodetic data v projected data but fail to see how. the table points2 contains point data stored in Lat Long (SRID 8307) Here is my query