Show the shorttext ,middle-longtext of a characteristic in one line.
Hello, All,
how can I show both of the shorttext and middlelong text of one attribute at the same time ? in Bex, I can only show one of them.
Many thanks
Tony
You can create a replacement path variable to repeat the characteristic.While creating the variable select the Text.
Regs
Gopi
Assign points if it helps ...
Similar Messages
-
it used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?
You can print to the Adobe PDF printer, but that only creates links that Acrobat or Reader recognize as such. That is the reason for needing the entire URL on one line. It is not actually an embedded link, but one created by Acrobat on the fly. With OFFICE 2013 you have two choices: 1. create the PDF with the print to Adobe PDF and then add the links in Acrobat so that they are complete or 2. I think the WORD save as PDF or XPS will create the PDF with links, but not sure. If so, that would be the quickest solution for you, but be aware of potential problems with the MS plugin.
Of course, the third option is to upgrade to XI which can be done with AA 9. You will probably not be eligible for a for an upgrade to whatever the next version will be. -
My ibook does not show the apple icon, just a circle with a diagonal line thru it
My laptop will not turn on. Just lighted up with a circle and a "no" diagonal across the circle. And the
constant 'booting in' icon spinning around and around. Why will it not turn on???Hi, and welcome to Apple Support Communities.
Which laptop do you have?
If it's an iBook, you can choose from this list:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
Which version of the OS is installed?
Has the laptop ever started up for you? -
some please help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Can any one please help me as I can't find numbers I store to my contact unless I go throu my call history or text messages
What no one can help me seriously
-
Weather icon that shows the current weather?
My blackberry weather app used the icon to show the current weather conditions (sunny, rain, etc). The iphone calendar icon can show the current date. Is there a weather app that can use the iphone icon to show the current weather? I haven't found one yet.
The calendar app is a native app and the only one that does change its icon. Third-party apps don't have that facility.
The built-in Weather app does change its icon though - but only dependent on where you are (the region settings in the phone) and only shows either 23° Sunny or 73° Sunny - nothing else -
Could otool default to showing the whole object file in assembly?
When I try to use otool, it just complains "one of -fahlLtdoOrTMRIHGScis must be specified". I eventually found through Google that otool -tv shows the text section in assembly, but I want to see every section in assembly.
Could otool just default to showing the whole object file in assembly when no command line options are specified?
Specs:
* otool (couldn't find version number through command line options)
* Xcode 4.5
* Mac OS X 10.8.2
* MacBook Pro 2009Would be nice iif someone from the AE departement could take a look at this. I tested it now with a full LabVIEW 2014 for Mac installation and there is the same problem. The liblvexports.a file in cintools/Mach-O is for both installations (32 bit and 64 bit) a 64 bit object library. Definitely a bug!
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
In the middle of an update, it call closed. Itunes keeps saying that it's not installed, even though ive tried reinstalling multiple times. All my iphone is doing it showing the ituns symbol and a charger. How can I fix this???
Hi lepyykko,
If I understand your question, you are trying to update your iPhone, but you are seeing an error message that iTunes for Windows is not installed, is that right? The first step is to get iTunes successfully installed on your computer. Then backup the iPhone before updating the iOS software.
Are you seeing any error messages when you try to install iTunes for Windows?
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
Are you able to update your iPhone wirelessly?
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
https://support.apple.com/en-us/HT204204
Before you update
Back up your device to iCloud.
Update your device wirelessly
The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
Plug in your device to a power source.
Tap Settings > General > Software Update.
Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/HT201263
I hope this information helps ....
- Judy -
I would like for the users middle initial or middle name to show in outlook 2010. I
can set it in the header meaning I see the middle initial when the email comes in but its not in the signature. I read a post about the middle name attribute has to be set in a/d? if that is the case please provide some feed back on how to accomplish that?
server 2008, a/d 2008In AD, the attribute name is "middleName". You can populate it in bulk using Powershell with
Set-ADUser cmdlet.
For Exchange questions, I would recommend asking them here: http://social.technet.microsoft.com/Forums/exchange/en-us/home?category=exchangeserver
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password -
Hey Community, i have an iphone 5 recently doesnt work, it's showing apple in middle even i connect to itunes there is nothing. Can someone tells me the problem please thank you
you could try forcing it into recovery mode by turning it off, hold the home button and plug it into iTunes at the same time, keep holding the home button until iTunes says its detected a device that needs to be updated or restored. Then restore.
-
When I open my Colour Picker, the middle block (which normally shows the colour in a gradient of shades) is just a solid colour depending on which H, S, B, R, G, B I have selected. How do I revert it back to normal?
Becky,
It seems that the issue is caused by a corrupt folder called en_US or similar (depending on language) within the Adobe Illustrator 18 Settings folder, see post #7 by Jules in this thread,
https://forums.adobe.com/thread/1595766
so the solution should be to move or rename that folder (or the whole Adobe Illustrator 18 Settings folder).
You can find the folder in Move the folder (follow the link with that name) with Illy closed.
As a temporary roundabout way, you can select the lower rectangle to the right of the rainbow and DoubleClick to apply that to change the top rectangle and the values: the lower colour is the right one. -
Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it (in Slideshow)??? At the moment, if I view them on my Mac Laptop, landscape photos fill the screen, but portrait photos only show the middle part, so I loose the top and bottom of the picture. Have tried cropping, but that means I lose top and bottom part of the picture, so that is not the answer!!
Homestly haven't a clue what's going on there.
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101. -
How do I get errors in Maps corrected? It shows the subdivision I live in, The streets and houses are in the correct place, however it does not name the streets. It then shows the correct street names in the middle of a field about a mile down the street from my subdivision.
Similar issues here.
I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing. -
Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.
Go to the Map, Background & Animatic Browser (last button in the centre tool bar alongside the Transition button). Drag the Black background (or any background) to your project. From an Event, drag the video selection directly onto the Black clip in the project. As you drop the video clip, a pop-up menu will appear. Select Picture in Picture.
Your video will appear as a small picture within the black clip. Click on it and reposition it to the centre of the viewer, using the yellow guide lines to get the exact centre position. Resize the Picture in Picture if desired by dragging the corner handles.
NOTE: You may need to extend the duration of the Black clip to match the duration of the video clip. Double-click on the Black clip to open the Inspector, then adjust the duration there.
John
Message was edited by: John Cogdell - added NOTE
Maybe you are looking for
-
We have recently upgraded remote distribution point to SCCM 2012 R2 CU4. when i try to distribute the package getting the error on the distribution point configuration status "Distribution manager failed to create the defined share or folder on distr
-
Hi, We have a customer (IT admin) who would like to deploy our app on about 20 machines via web start. He then wants to turn off online updating for an indefinite period. Then, once he decides that he wants the most current version on all his machine
-
GLPLUP transaction in background
Hi, Is it possible to execute an upload in GLPLUP transaction in background? In the menu--> Program appears the option but it is disabled Thank you very much
-
Are mp3 files seekable over RTMP with FMS 3.5?
I had an OSMF sample running on my dev laptop with Wowza Media Server because it's OSX. I use the following line to setup an mp3 stream over RTMP: var audio:AudioElement = new AudioElement(new NetLoader(), new URLResource(new URL(selectedMediaSource)
-
Cp6: Not sure what to do. The mp4 works perfectly when reviewing the published file from my computer, however, once uploaded to my web site, does not work, just a blank screen. The rest of the file works perfectly. I am uploading to a Google site and