Show time

The hourly time bar down the side of ical has gone, how do I get it back?

I have now downloaded the Combo update and reinstalled, this clears the problem and the time in hour form is down the side again.

Similar Messages

System is showing time out when run in background

Dear all,
We have two systems: One R/3 and EBP. We have made one report where the remote function module will be called from R/3 to EBP. There are 4 lakhs data in SAP. We are sending 10000 data as package in internal table and getting the corresponding output. But the system is showing time out when the report has run in background. Can you please suggest how the process can be improved so that the timeout can be avoided.
Thanks and regards,
Atanu

Hi,
Try to fetch records in smaller chunks and process them. For example, if you are trying to fetch records for one year, instead of single query, try to fetch in 12 sets for each month. Fetch first month and process the records and put them in the output internal table. Then go for next month and so on. Anyway your program is running in background. There will not be any user complaint also. The solution might sound bit funny. But it works.
Regards,
Hema

ICal 'Show time in month view' Month view missing text!

Hi I hope you can help me!
Since syncing to .mac last week my calendar has developed a problem which is happening on both of my Macs.
Some of my entries and particular words are not displaying properly when I enable 'Show time in month view'. Words at the end of the entries are missing! (they are fine with the times disabled). Can someone please offer an insight into this as I just bought my Mac and use it for my business.
Thanks in advance.
Aaron

I have the same problem. I want to print the month view like it was in my older version of Ical and it won't do it. I want to print what I see.

Does calendar month view show times

I'm sure I'm not going crazy but I could have sworn that, until late last night, my iPad 2's calendar when in month view showed event times. Similar to what you see when you check the "show times in month view" box when in iCal. I am pretty sure that that function was on my iPad 2 prior to my downloading iTunes 10.3.1 beta because I keep my iPad near the kitchen phone so that we can 'check the calendar.' Now it is not there. The folks at MME support didn't have an iPad to check and they suggested that I go to a local Apple store and see if the ones in the store had this function. I did and they did not.
I spoke with a genius at the Apple Store and he couldn't verify whether that was ever a function of iOS on the iPad. I did tell him that my iPad had been having some strange things happen on the display when I activated the calendar on the iPad. Events would appear, disappear, then reappear sort of in an wave. I am not sure as to the timing of this as to whether it was pre iTunes 10.3.1 beta or after I installed it.
HELP! Was I just seeing things? Or was it there and now gone?
G-N

Thanks for the wild and crazy ideas.
I did remove any events that span midnight and it did not help.
I looked at the DbFixit program. Since it corrects problems in the Palm and not in Palm Desktop I believe it is not relevant. The reason I belive the palm device is not involved is because of the following test:
I removed all previous Palm Desktop versions
I removed all registery entries for both Palm, PalmOne, and the USB (as specified by a chat session with Palm)
I removed all data directories including \Program Files\PalmOne, \Program Files\Palm, and \Palm
I removed all instances of data in the Documents directory
I did a cold boot of the computer
then...
I did a fresh install of Palm Desktop
I typed in a year's worth of data
I did not sync or otherwise connect a palm to the system
I selected month view
The system crashed!
I believe this takes the Palm device completely out of the loop. This problem occurs when typing data in Palm Desktop from the keyboard.
I appreciate any ideas, and will follow up on them.
Thanks again
Jack Cornelius
Since no Palm was involved, the corruption must have occured in the Palm Desktop program itself.
Post relates to: Tungsten E2

Show times in month view?

Hey all! Just made the switch from Outlook to iCal and am wondering when you're in the month view if you can have the individual entries show the time. Thanks so much!

hmmm4321,
Welcome to Apple Discussions.
It seems that iCal>Preferences...>General>"Show time in month view" may be what you are looking for.
;~)

Events not showing time in iCal

I just lost my hard drive last week and now I'm re-entering everything. I'm trying to put my calendar events back into iCal and it no longer shows the time next to the event on the calendar. It used to say for example: "Dr. Appt-3:15" but now it only shows the event and not the time. Is this a change in the last week or do I have some sort of glitch? I do not want to have to click on an event to see the time, I want to just see it all at a glance. I have done all updates.
Also, maybe someone could explain to me the difference between "New Calendar" and "New Calendar Group"?

Hi,
Welcome to Apple Discussions.
Is this in Month view? Go to the iCal menu and open Preferences. Under General there is a check box for 'Show time in Month view.'.
Calendars are how you group events (i.e. make them the same colour). Calendar Groups are how you group calendars (you could have a 'Work' group and a 'Play' group with multiple calendars under each), you can then easily show and hide sets of calendars.
Best wishes
John M

How do i show time/date stamp at start of each clip

This may be a camera issue, not imovie, not sure. My (sony dcr-hc21) camera records but doesn't show time/date at start of each clip (my old non-digital camcorder used to show them for a few seconds). is there a way to get imovie to show these time stamps? I'm using imovie 3.0.3.
emac Mac OS X (10.3.9)

Hi r
There are no stright forward - cost free way to get this to my knowledg.
- I think You can buy a plug-in for this. (Not sure)
- A quality redusing way is to copy from camera via analog cable to a
VHS-VCR then reimport to a fresh miniDV tape and using this. If You
just want some sec. with date and time You can cut between old and
new material but the quality change will be more noticable this way.
- Some people has two miniDV cameras and do an analog connection
via them. Smart.
Yours Bengt W

Actual date hours PROBLEM - Displaying or not "Show time" in "User preferences"

Hello,
This is my current issue. I have a 5 days calendar with hours 7AM -> 8PM.
AM ->When I check "show time" in "user preferences", I show the good hours in ES and EF. When I apply AS and AF, AUTOMATICALY the good default hours are applied if i change the date (7AM -> 8PM)...
But, if i check, "do not show time" in "user preferences" and then i apply AS and/or AF changing date, PRIMAVERA apply automaticaly 00:00 in the hour ans "forget" the hours of the calendar...
It represent a big big problem for me, first of all in the gantt representation.
Any idea to fix this issue ?
Thanks

I think you need to do setting in grantt chart view setting..as Day,Week,Month in stead of user preference as " do not show time".

Flash player 9 for Linux, shows time one hour ahead

Flash player 9 show time one hour ahead on Linux. Has anybody
seen this behavior?
I want know if there is any fix/workaround for this?
try following code on FP9 on Linux Mozilla. My observation
was it shows time by one hour ahead.
trace("Current Time "+new Date());
I hope I am not missing something very basic here.

Can somebody please confirm/deny this.
FP 9 on Linux shows time one hour ahead than the local time.
Try following line with FP9 on Linux
trace("Current Time "+new Date());

ITunes Music Progress Bar Fails to Show Time Remaining

I use iTunes for Windows. Suddenly, in the last two weeks, the progress bar on my iTunes screen has quit showing time remaining on a tune on the right-hand side of the bar. Throughout the tune, it shows only the full time of the tune. How can I change back to time remaining?

If I remember right in Qt before version 7 you could get time remaining. I'm 100% in saying version 7 dropped this...You can get time remaining in the info box...

Ical not showing time zones

Why do iCal invitations not the show time zone of invite? And why does it get the time zone wrong in the calendar of the invited person if that person is on a different time zone?
Anything I can do about that?

You need to be posting this in the Calendar forum since you are asking questions about iCal/Calendar.

Airport Extreme "Show Time Connected" Display

"SHOW TIME CONNECTED" problem
I have a relatively minor problem with my Airport Extreme. I have elected to have the “Show time connected” displayed in my menubar. For the last few months, and certainly since I upgraded to OS 10.7, the time connected display keeps resetting itself, sometimes actually back into negative time, showing as a negative time connected and gradually working its way up to zero. At other times it will seem to work accurately for a day or 2 and then reset itself back to 0.
This does not seem to affect my Airport Extreme function which does not disconnect or dysfunction. It seems that it is only the timer itself that keeps resetting itself. I know this is a minor issue but would be happy for any advice on how to correct it.
Thanks very much.

I ran OS 10.5 for 3 years with my Time Capsule and never saw a negative time. I recently updated to 10.6, but I don't think that that caused the problem, although I didn't check the apparent connected time on another computer.
"...only seems to affect a few users." is not a defense. Apple's job is to write software that always works, not that works mostly. I'm not sure that there would be a flood of reports. I think that most people don't turn this option on. It's an obscure setting (people ask where it is in other forum posts) and of little apparent value. I use it because it's the only reliable indicator that I am actually connected to the internet. I would not have upgraded the firmware on my TC except that the flashing yellow light (that I can't reset) made detecting other problems with the TC impossible.
I should also point out that on a recent trip I connected to a wi-fi router that does not support displaying the connected time. However, my computer continued to display the time that my TC had been connected when last it spoke to my computer. This does appear to be a 10.6 bug, as 10.5 never did this.

Show Time Scale

Hi,
Just evaluating CR 2008 having used CR 2008 Basic through Visual Studio 2008. The reason for considering the upgrade is to benefit from the enhanced formatting abilities in the full version.
My problem is that I am trying to configure a stacked area chart to show various related financial figures over the period of a year or more. My problem with a regular stacked area chart is that because of the large number of data points (daily) the X axis becomes far too chaotic with the large number of labels. The obvious option seems to be to use the "Show time scale" option in axis settings, however when you chose this option the "Date axis area" chart type is automatically chosen and this chart type doesn't seem to allow stacking. Can anybody help?
Secondly, is there any way to change the scaling and date format of the X axis when scaling by time e.g. is there anyway of changing the scale to monthly and showing the date format as mm/yy. Also if I wanted to view the chart using a yearly scale is there any way of doing this and setting the date format to yyyy.
Kind Regards,
Mark

>
Raghavendra Gadhamsetty wrote:
> Did you try adding the formula year(datefield) in X axis by removing the existing datefield?
>
> Regards,
> Raghavendra
Thanks for the answer regarding dates. I'm still awaiting an answer on the following part of my question:
"My problem is that I am trying to configure a stacked area chart to show various related financial figures over the period of a year or more. My problem with a regular stacked area chart is that because of the large number of data points (daily) the X axis becomes far too chaotic with the large number of labels. The obvious option seems to be to use the "Show time scale" option in axis settings, however when you chose this option the "Date axis area" chart type is automatically chosen and this chart type doesn't seem to allow stacking. Can anybody help?"
Thanks in advance for your help.
Kind Regards,
Mark

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

HA! I figured the find my iphone out!!!!! You can have more than one icloud account in "Mail, Contacts and Calendars". So my husband's & kids' phone icloud account under "settings, icloud "is their individual @me.com account. Set it to everything you want EXCEPT Find My Iphone. Then under "settings, mail/contacts/calendars" you set up both accounts (your @me.com which may already be there), then add another with the main appleID and enable ONLY Find My Iphone. Now when any of us log into Find My Iphone from any device with our main apple ID for the app store, all the devices show up!!!! YIPPEE. I made my own day!
I think the message I got previously was because I hadn't disabled the find my iphone on the @me.com account first.

Show Time only in inputDate component

Hi,
I have a requirement to show Time only field, and later update this Time to the a Date field in the database with this time portion only.
I used the convertDateTime on the inputDate as follows:
<af:inputDate label="Start Date" id="id1" required="true"
binding="#{pageFlowScope.calEntryBean.startDate}"
visible="true"
partialTriggers="soc4">
<af:convertDateTime pattern="HH:mm"
timeZone="#{session_resourceProfile.userTimeZone}"/>
</af:inputDate>
It is displaying the Time correctly, but when launch the date picker, it still shows the calendar plus the time selection. Since the patterm is "HH:mm", the date in the calendar popup is incorrect. Is there any way to hide the calendar and shows only the time selector?
Please advise.
Thanks.
-Mina

I tried using convertDateTime under inputText component. It works fine displaying the time portion correctly with the timezone converted too, but when getting the time value from the inputText when saving, it is one hour off. Somehow it has some issue,s suspecting it's the winter and summer time, so there is one hour off.
Hence, I was trying to see if there is any other solutions.
Thanks.
-Mina

Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Show time

Similar Messages

Maybe you are looking for