Show timecode for subclips

Hello everyone. I think there must be a simple answer to my problem; I just can't figure it out.
I get dailies digitized one tape at a time, so I need to subclip each take before I start editing.
The problem is, every subclip starts with timecode 00:00:00;00. How can I see the original timecode for each subclip?

I'm creating subclips the usual way - by clicking "Make Subclip" in the Modify menu.
I just noticed something. If I open the original file in Quicktime, it has a video (DV) and audio track but no timecode track. I created this file in Avid MC by doing a QuickTime export (because it was MXF files before). I don't know how to add a timecode track in Avid export, but would that be the solution?

Similar Messages

My TV show purchases don't play correctly. When I click on them, a black screen with no audio plays. The timecode for the show runs, but I don't see or hear anything besides that black screen. Help!

My TV show purchases don't play correctly. When I click on them, a black screen with no audio plays. The timecode for the show runs, but I don't see or hear anything besides that black screen. Help!

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin Usuwanthim

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

Number of Page View is showing zero for Site web Analytics Reports

Hi,
We have enabled Site Web Analytics reports in our Site Collection but the Number of Page views is showing zero for all the dates. We have checked all the events to capture in Site Collection Audit settings, Reporting feature is also activated but still the
count shows 0 for all the dates.
There are other Site Collection that exists under that Web Application but they show the count for Number of Page views in Site.
Any help would be appreciated.
Regards,
Vijay

hi
1-first check "Usage and Health Data Collection Proxy" is started, if not started:
find usage proxy id with following command:
Get-SPServiceApplicationProxy
then start service with following command:
$UsageApp = Get-SPServiceApplicationProxy | Where {$_.ID -eq "[usage proxy ID]"}
$UsageApp.Provision()
2-check following link:
Popularity Trends populating 0 results
yaşamak bir eylemdir

I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my passwor

I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my password, which it won't accept because it's an invalid username.

I had this same issue and got it resolved very simply when I contacted Apple SUpport
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and sign into your infomation
> Go to Manage apple id and primary email address
> Change it to the old apple id that your device is asking for
> Save changes
> Go to Settings > iCloud and sign out of the infomation
> Go back to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
> Change it back to the correct apple id
> Go to the email address adn reverify the apple id
> Sign back into iCloud on your device
> Smile
Article to back up my statement http://support.apple.com/kb/TS5223

WT reporter does not show split for tax authorities!

Dear all:
I need to report for all employees some WTs of taxes, but wt reporter does not show the splits for them (to distinguish federal from statal authorities payments), it is like summarises all the same WTs... I tried payroll recon. report but this one does not output the data in ALV format (im in 4.6 version) so it is not useful to run in bulk
Do you have any work around for this?
I would appreciate any tip or workaround on this,
Thank you!

Hi
1. Allocated costs are always treated as Fixed costs, unless you have booked the expenses in FI using Activity Type as Aux Account assignment object
2. Check whether these costs are included in Inventory valuation in your Cost Comp Str in OKTZ... If not relevant for inv valuation, these costs wont show up for Variance calculations
br, Ajay M

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

HT3819 Home Share issue: I have a Mac and Apple TV. Both are log into the same Wifi network and the same iTunes account (I can view purchased movies on AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers. Itunes sidebar-no

Has anyone else found solution to Apple devices not 'seeing' each other on Home Share? I have a Macbook Air (new Nov'12) and Apple TV (new Dec'12). Software updated on both. Both are logged into the same Wifi network and the same iTunes account (I can view movies purchased from iTunes on my AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers... and ... Itunes sidebar does not have a 'Shared' area at all. Help please as without this functionality, my Apple TV only provides portal to purchased (i.e. Netflix,...) content which I can get from Wii or Xbox.
I have already tried the following without success:
1. Homeshare DID work the first day after I setup Apple TV... but the next day it has not worked since then.
2. Powered off 30 sec then re-started (Apple TV & Macbook & iTunes login)
3. Checked Firewall settings per Home Sharing troubleshooting guide (correct settings)
4. Turning on Photostream in iPhoto and selecting iPhoto within iTunes and then checking to see if Photostream shows anything on AppleTV (it shows 'on' for my iTunes account but 'Zero' pictures found ... despite the >3,000 pictures showing avail in iTunes).
I also have 'Remote" app on my iPhone 4, with Home Sharing turned on (same Wifi network)... it has a very similar message as the Apple TV and same result that despite all devices having HomeShare 'on' they cannot see each other: "Remote will automatically find the iTunes libraries and Apple TVs that have Home Sharing turned on using the account xxxx (it lists my correct itunes account name)."

I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

How to get an email online when showing offline for sending. Solutions on site don't solve the problem.

How do you get an email account online when it is showing offline for sending. All settings are correct, previous solutions on the site don't help. One account works find the other one receives but doesn't send. No issues with ISP was found. This may have been happening since OS travel. Took a while to realise it was using the other account for sending.

I just solve the problem. While OS we brought an internet USB and connected to a phone, one or both of these must have caused the problem. When both of the downloads associated with them were deleted the email issue was resolved. regards

Why can't I download Photoshop CC(2014) and why does my Creative cloud app show updates for CC(2014) products I do not have?

Why can't I download Photoshop CC(2014) to my Mac Pro desktop running OSX 10.9.3. My Creative Cloud app shows updates for all apps that I have as CS6 on my desktop but I have only subscribed to Photoshop CC. Lightroom shows Install but it is installed. Trying to Install Photoshop CC(2014) results in and error message "Installation failed Errors encountered during installation.(7) more information.
More information gives Exit Code: 7
Please see specific errors below for troubleshooting. For Example, ERROR:
- 0 fatal error)s), 0 error(s)
I also cannot directly download from my account on the web. This has been going on for a week or more and I have tried numerous suggestions on the forums but got nowhere. I uninstalled Creative Cloud app today but could not find the installer again so I assume that was deleted. I cannot download that now as on Adobe's site it says we are experiencing problems. Aren't we all.
I was happy with CC until last week but now cannot recommend it.
I also have a Macbook Pro retina and Photoshop CC(2014) downloaded no problem on that.

Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
or
Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

Do not show dots for 'free' events in the calendar month view

I wish I could.... not show dots for 'free' events in the calendar month view. For an overview of when I have hard-scheduled events in the calendar it's pretty tedious and slow to go day -by day, and other views... Instead the dot in the month view... - why does it show even "free" events? Any ideas, tips?
Thanks!

Unfortunately there is no option to disable the dots.
<Edited by Host>

I am using an apple TV to show a slide show which is sent via WiFi from a mini computer. The slide show repeats for a few hours and then stops and shows "no signal". What's going on- and how do I get the show to cycle indefinitely?

I am using an apple TV to show a slide show which is sent via WiFi from a mini computer. The slide show repeats for a few hours and then stops and shows "no signal". What's going on… and how do I get the show to cycle indefinitely? (I have set the server to NEVER sleep)

Welcome to the Apple Community.
Have you also set the Apple TV not to sleep.

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN

My ipod touch 4g doesn't show option for os update in setting-general page. Can i update it via itunes by connecting it to computer?

My ipod touch 4g doesn't show option for ios update in setting-general page. Can i update it via itunes by connecting it to computer?

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode ue one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Show timecode for subclips

Similar Messages

Maybe you are looking for