Show users problem

hi, i'm having a issue with show users on a cisco catalyst 3750
i'm logging in with a local user and I have tried logging in with a tacacs and radius account, when I do a show users on the switch it doesn't show the username,
however on the cisco 1841 router I have it shows the user information all the time,
if there a command I have to use on the switch to make it show user information ie username used to login, when the show users command is issued. I have tried to compare the configs however all the generic info seems to be the same.
ROUTER#sh users
Line User Host(s) Idle Location
194 vty 0 admin idle 00:12:37 10.0.0.13
Interface User Mode Idle Peer Address
SWITCH#sh users
Line User Host(s) Idle Location
2 vty 0 idle 00:12:37 10.0.0.13
Interface User Mode Idle Peer Address
I hope this makes sense
Thanks

I checked this on my 3750's and it works fine. Did you see if it's a bug in the IOS you are running? I'm running 12.2(40) SE
Craig

Similar Messages

Neat OAM Trick (showing users' groups), but a problem...

Hi,
I took an OAM class this week, and the instructor showed us a way to show users' group membership in User Manager.
To do this, create a derived attribute for the inetorgperson attribute, e.g., named "ThisUsersGroupMembership", and configure it with:
Self
groupofuniquenames
uniquemember
Then, add the derived attribute to the user panel, and then go into User Manager and display an individual user's profile. The user's group membership should be displayed as the "ThisUsersGroupMembership".
I thought that this was pretty nice, but I noticed that if I go to the User Manager's main page and customize it to display the "ThisUsersGroupMembership" attribute,
the attribute name is shown, but no values are shown for that attribute.
I'm trying to figure out why the values for the derived attributes are not being displayed on the main User Manager page, and also if it's possible to get that working?
Thanks,
Jim

Jim,
Yes even I am not able to list users. I did not understand what you were exactly pointing to in your earlier mail.
This seems to be a bug with OAM but before we arrive at this conclusion. I think we should try and look at the xml response sent by OAM for search result. I am not able to recall how we can see the xml response in the browser. If you know then you can try and see if the Groups of the user are returned? If groups are returned then you will have to look at the stylesheet being used and modify it to display the groups.
If groups are not fetched then it must be a bug with OAM.
Thanks
Preetam

{Solved} Windows 8.1 Doesn't show users when windows loads, only shows options for accessibility and shutdown/restart

I just recently come into a problem on a dell all-in-one, where the computer has been updated to windows 8.1 and doesn't show users, only a blue screen with the power options and accessibility options and here is how I fixed it.
Note: you will lose your desktop apps
1. Turn on computer and let load to the blue screen with the options
2. While holding down shift click on the power button and then click restart (while still holding shift)
3. Hold shift until the advanced recovery options comes up
4. click on Troubleshoot>Refresh your PC
5.Enter password for user account
6. Let it do its magic

Hi,
Thanks for your sharing. And it will benifit others who encounter the similar issue as yours.
This issue can be caused by corrupted winlogon components.
You are right to refresh to repair the system.
Kate Li
TechNet Community Support

Server Admin is not showing all users in "Show Users

I've discovered that a previous upgrade from Tiger to Leopard in 2009 has lead to newer users not be displayed Server Admin 'Show Users and Groups'. New groups display fine.
We upgraded again to Snow Leopard a couple of months back and so are running the latest admin tools.
I really can't pick why these accounts aren't showing so any points would be appreciated.
Thanks.

After numerous reinstalls failed to solve this problem, I discovered that on my system, it has to do with using an external monitor (via DVI port). When I drag the Firefox window from my laptop screen to an external monitor, "Show All Bookmarks" is suddenly empty. Dragging the browser window back to the original display (laptop) does NOT fix it. Firefox must be RESTARTED on the original display. When Firefox re-opens, "Show All Bookmarks" functions normally again.
WORK AROUND: the only way I can view "Show All Bookmarks" on my external monitor is to first open both the browser and "Show All Bookmarks" windows on the original display, drag BOTH windows to the other monitor and be sure to leave the "Show All Bookmarks" library window open in the background. If I forget and close it by accident, the problem happens all over again.

My Apple ID showed security problem that needs to reset my password. But I forget my resue email and scecurity questions' answers. So what can I do?

My Apple ID showed security problem that needs to reset my password. But I forget my resue email and scecurity questions' answers. So what can I do?

If you are on Lion or newer, follow directions here:
Reset the user password in OS X Lion, Mountain Lion and Mavericks
Reset 10.5 Leopard & 10.6 Snow Leopard password
1. Power on or restart your Mac.
2. At the chime (or grey screen if your chime is turned off), hold down Command+S on your keyboard to enter single-user mode.
3. This step is optional, but it’s a good idea because it checks the consistency of the hard disk before moving on. At the prompt, type fsck -fy and press Enter/Return. Wait for the checks to complete before going to the next step.
4. Type mount -uw / and press Enter.
5. Type launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plistand press Enter.
6. Type ls /Users and press Enter. This lists all of the usernames on the computer – helpful if you don’t know or remember what these are.
7. Type dscl . -passwd /Users/username password and replace “username” with one of the users displayed in the previous step. Replace “password” with a new password of your choice. Press Enter.
8. Type reboot and press Enter.

EWA reporting: Not showing User Activity and Transaction Activity

Hello everyone!
Got 3 systems in EWA reporting, 2 systems works fine i can see User and Transaction Activity with diagrams etc.
But 1 of them showing User activity = 0 and no Transaction activity also.
Any ideias to solve it?

Hi Daniyar,
I am also facing the same problem, can you let me know what sort of patches need to be applied to overcome this issue??
Regards,
BASIS.

My iPad mini retina display wifi 16 GB is showing blank white display and is like frozen. I can't shut it down or restart. It was working perfectly till 13/4/2015 night and next day morning it showing this problem.Please help........

My iPad mini retina display wifi 16 GB is showing blank white display and is like frozen. I can't shut it down or restart. It was working perfectly till 13/4/2015 night and next day morning it showing this problem.There is no physical damage to my iPad and is in perfect good condition. I updated the latest OS 8.3 version 3 days before this issue happened. I took it to the apple authorised service centre but to my shock they told the display and unit has to be replaced which will cost me Rs.15000/-. It's just been one year and 7 days only since i bought my iPad,i.e, just 7 days out of warranty period only.I don't find any fault with the hardware neither no physical damage is there. Need help to sort out this issue.

My iPad mini retina display wifi 16 GB is showing blank white display and is like frozen. I can't shut it down or restart. It was working perfectly till 13/4/2015 night and next day morning it showing this problem.There is no physical damage to my iPad and is in perfect good condition. I updated the latest OS 8.3 version 3 days before this issue happened. I took it to the apple authorised service centre but to my shock they told the display and unit has to be replaced which will cost me Rs.15000/-. It's just been one year and 7 days only since i bought my iPad,i.e, just 7 days out of warranty period only.I don't find any fault with the hardware neither no physical damage is there. Need help to sort out this issue.

My new macbook pro is giving me hardtime. even apple team is not being to solve it. they replace the motherboard first it didn't work. second time they formatted the computer and that also didn't work. every time my mac showing different problems.

my new macbook pro is giving me hardtime. even apple team is not being to solve it. they replace the motherboard first it didn't work. second time they formatted the computer and that also didn't work. every time my mac showing different problems.
At first my computer had issues. Once it go to sleep it will not back again. I dropped my laptop at apple store to fix it. After 10 days they returned my laptop saying they were no able to fix the problem so they replaced motherboard aiming if that might help. Acttually that didn't help.I had same issue again. I visited apple store again. This time they said they could fix, if I will allow them to format the harddrive. I said ok. They formatted it. It was working fine for few daysAfter few days compter is taking.even more than 15 min to shutdown. Now computer has another problem. It is being hang frequently like every 20'to.30 min.
I don't know what to do? I still have one month left on first year warranty. I have requested couple times to apple associates either to fix or replace or refund. They are showing me rude behavior. They are not understanding my situation. I am a student. I need to do lot of home work. Since last three month my mac book and apple associates giving me hard time. Any suggestions are welcome.

Contact Apple Customer Care - not Apple Care - Customer Support. Have your receipts handy and/or case numbers. Be patient, be calm, and tell your story just as you have here. I get the sense you are not in the US and don't have access to an Apple Store but are going to an independent shop. This makes using Customer Support all the more important. If phoning isn't viable, use registered mail.
Since time is running short, be prepared to purchase AppleCare to exennd your warranty 2 more years. Yes, you shouldn't have to do this, but it gives you added protection and more opportunities over the next 2 years to claim a replacement computer if you don't get one immediately. After dealing with a similar unhappy situation with a Mac in the late 1990s I finally got a replacement computer and reimbursed for the AppleCare policy.

My MacBook Pro 13 inch makes a clicking noise from the hard drive and can not start up in safe mode and normal. I then ran disk utility in recovery mode and disk utility shows no problems with the hard drive. What is the problem?

Please help me, I have a mid 2010 Mac book pro with a toshiba mk3266gsxf harddrive. It started making a clicking noise and then my computer crashed. I proceeded to boot in safe mode, but it doesn't work. When I ran disk utility in recovery mode, it showed no problem with my disk. Does any one know what the problem is?

Sounds like a mechanical problem with the drive and it ruined the sectors where the Macintosh HD partition (and OS X, and files and programs) reside, but not your Recovery HD partition.
If you held command option r while booting, that's Internet Recovery and it's loaded via the Internet, not via the Recovery HD partition on the boot drive, so that could mean the drive is dead mechanically or there is another issue.
In either case the drive will likely have to be replaced, it's a matter of what occured to where and the drive state if you can recover data or not. If you made recent backups then your fine.
My computer is not working, is my personal data lost?
Most commonly used backup methods

Show user´s name and lastname using XML Form Builder

Hello
I created a XML project with XML Form Builder and i have to show user´s name an lastname in RenderListItem form.Can anybody help me,please? Thanks

Hi Unai,
check out the description by Patricio in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=78716&messageID=1616027
Hope this helps,
Robert

'Unknown user' problem in Guest account

Hello.
Remember the unknown user problem in the Finder that plagued everyone that upgraded from Tiger? Thanks to someone on these boards' AppleScript, I managed to fix that for my account eventually and get it changed to staff for every file and folder.
However, I just checked out my Guest account in Leopard, and when I do a Get Info on the home folder, the public folder and the sites folder, the unknown user still appears.
What do I need to do to fix this?
Would reinstalling Leopard sort it out by the way? I don't want to do it because it would create countless hassles, but is there a way of reinstalling Leopard that lets me keep my own home folder and applications while killing all the permissions problems?

Does it properly refuse authentication ? Or does the login page stop appearing or something ?
There was a bug with the webauth dying under heavy load, regardless of number of identical accounts used.
One good way for you to check would be, when problem occurs, to create a second backup guest user and see if that would start working. If it doesn't, the account is not the problem.
I'm not aware of any maximum of usage of the same account.
Which 4.2 exactly are you running ?

End Users Problems

Hi Experts:
If any one can answer that after implimentation of SAP, what are the most frequent problems whihc End User suffers from??
Thanks
Rashmi

if it is for time management
mostly u will problem related to Absences and absence quotas updation and some time u may get worng reports when u take reports
End user problems means it depends upon the nature of the functionality which he works
so check Time Related infotypes functionalities and their configuration issues
AS TIME IS UNIVERSAL MODULE

We need to show User's subordinates hierarchy wise in Reports

Hi,
In CRM OD report Reporting level shows user's upper hierarchy..But we need Subordinates also.How can that be done in Report.

Raju Madari wrote:
Hi,
In CRM OD report Reporting level shows user's upper hierarchy..But we need Subordinates also.How can that be done in Report.Most probably you post in wrong forum. this is Application Development in PL/SQL » Reports forum.

LaserJet 2600n Print Quality problem (with a scan showing the problem)

I'm trying to create areas of solid colour in order to use the toner transfer method of making printed circuits. To do that I need to print really dark solid black blocks - when I try that I see uneven toner in certain areas. This scan of the output shows the problem:
There are lighter areas (less covered by toner) at the bottom (page orientation wise) of solid black blocks - but only where there is a subsequent block of black below! For example, the leftmost shape's bottom edge is fine.
I'm perplexed. I'm very impressed with the configurability of the 2600n, and I get the feeling that there's probably a setting I could tweak to solve this, and I'm hoping that there's a laser printer expert reading this forum who'll have some suggestions.
Cheers,
Chris.

It looks to me as if you have your print quality setting in your printer driver set to standard or draft rather than set to best photo. This setting has to be changed in your printer driver which is accessed by the button in the lower left-hand corner of the screen when you are in the print module.

How to show User Auditing data in dashboard/reports in MS CRM 2013 online?

HI,
I am having requirement to show user auditing details like user last logged in date/ session spent time in MS CRM 2013 online.
I did not found any option to query user Auditing data.
I found the Audit summary View but don't know how to use it.
Could any one suggest me how to achieve this.
Thanks
Baji Rahaman

Please try this
Public Function Decompress(ByVal arr As Byte()) As Byte()
Dim s As Byte()
Dim notCompressed As Boolean
notCompressed = False
Dim MS As System.IO.MemoryStream
MS = New System.IO.MemoryStream()
MS.Write(arr, 0, arr.Length)
MS.Position = 0
Dim stream As System.IO.Compression.GZipStream
stream = New System.IO.Compression.GZipStream(MS, System.IO.Compression.CompressionMode.Decompress)
Dim temp As System.IO.MemoryStream
temp = New System.IO.MemoryStream()
Dim buffer As Byte() = New Byte(4096) {}
While (True)
Try
Dim read As Integer
read = stream.Read(buffer, 0, buffer.Length)
If (read <= 0) Then
Exit While
Else
temp.Write(buffer, 0, buffer.Length)
End If
Catch ex As Exception
notCompressed = True
Exit While
End Try
End While
If (notCompressed = True) Then
stream.Close()
Return temp.ToArray()
Else
Return temp.ToArray()
End If
End Function
Thanks & Regards Manoj

Show users problem

Similar Messages

Maybe you are looking for