Show value every 10 seconds

Hi,
I am trying to create a moving average for the data I am collecting. I have managed to implement the movingaverage.vi into my program, but now I want to display the actual value on the front panel but only once every couple of seconds (at the moment I am collecting data many times a second and this is too quick to read on the front panel). Is there an easy way to do this?
Thanks
Solved!
Go to Solution.

There might be examples of this on the forum. The easiest implementation is to use a State Machine, where you enter the "refreshDisplay" event at timed interval.
Have a look at the attached example.
R
Attachments:
timed display.vi ‏9 KB

Similar Messages

The iPad screen only shows an apple every 3 seconds. what is wrong?

Screen shows apple every three seconds.I cannot turn it off. the iPad2 is recognized by itunes when connected to computer. Will not start up or shut down.

If it keeps showing the Apple Logo every few seconds, then it is continuously trying to reload the iOS, but somehting is making it restart. Normally, a failure should make the iPad boot into recovery mode automatically, but you may have a hardware issue that needs service.
Try this before getting service:
1) Plug the iPad into the computer and open iTunes.
2) Hold the Power Button and Home button simultaneously for 10 seconds, then release the Power button but continue holding the Home button for 20 more seconds or until the iTunes symbol shows on the iPad's screen.
3) Restore the iPad using iTunes on the computer.
If you do not get the iTunes symbol on the iPad and continue to see the Apple Logo over and over even while trying these steps, your iPad will need service to get it fixed.
Locate a Service location: https://locate.apple.com (choose your country in the top right)
Call Apple for Mail-in Service (if available): http://support.apple.com/kb/he57
Set up service on your own or check options: https://selfsolve.apple.com
Questions about service and potential costs: http://www.apple.com/support/service/ (Choose your country after selecting your product)

Online video players showing progress bar every 30 seconds

Sorry, i am new member of this forum. I'have joined because i have a serious problem and i think you may have the solution for this. it think all this started when i installed windows 8 on my asus laptop. Every online player does the same: after the progress (seek) bar and mouse pointer disappears automaticly when you start a video in full screen, they show up every 30 seconds after that. So, if they disappear on 0:05 seconds, they appear again on 0:35 and on 1:05 and again and again untill the end of the video. it's so annoying. can someone help me about this ? thank you...

Are your drivers (particularly network adapter) up to date for Win 8?
You can also check your Video drivers:Windows: how do I update the device driver for my video/display adapter?

Buffering every few seconds while watching On Demand show on computer

Trying to watch On Demand Show on my home computer, but it rebuffers every few seconds. I have the triple play with the high speed internet.

Hi Phil,
We have Verizon fios and have been streaming videos with no problems in the past on all my apple devices including my iPhone 5s. now I have no problems streaming hbo, show time and Netflix. WhenI start a video it takes awhile to load and when it starts it will stop every 3 seconds and then I have to push the play button to start the video again. I have not had the opportunity to test any other Wifi connection other then the one at home.

Why value returned by datasocket updates every one second?

I am using labview object to retrieve modbus register value using datasocket. I configure the poll rate of Modbus to 0:00001 (1ms I think). I read the labview object every 250ms in a loop and store the data into a file. After reading the file, I found that the value changes every four data. It looks as if the software only reads the modbus register once every one second. Is it the way it works or is there anything wrong with my setting?
I appreciate your help and look forward to your reply.
Steven

Hi Steven,
I've modified the VI you sent to use the new DataSocket VI's, rather than the old compatibility VI's. These VI's should allow you to specify the update rate within the DataSocket URL. You would specify the update rate and deadband in the following way:
opc:\\ServerName\OPCServer\ItemName?updaterate=100&deadband=0.7
If you have any further questions, please post a reply.
Regards,
Kristi H
National Instruments
Attachments:
datasockettest2.vi ‏32 KB

HELP!!! LOADING ICON SHOWS EVERY 5 SECONDS FOR ABOUT 3SECONDS!

I have a BlackBerry Curve 9250 for about 7 months now. I have no problems with my phone and it works well and I love it. But something must have happened cause the black loading icon on the center of the screen keeps on showing every 5 seconds for about 3seconds and my phone freezes everytime the loading icon appears.
I left the house in the morning, my phone's battery is fully charged. I did nothing special with my phone, just the usual calls and texts. I didn't download any apps either. But I was using wifi during the day so when afternoon came, the battery was already orange. When I arrived home around 10 in the evening, I checked my phone and the battery was already red so I plugged it in to charge. When it started charging, that's when the loading icon started appearing. It appears every 5seconds and it freezes the screen for about 3seconds. Now that the battery is fully charged, it still does the same thing. But now, it appears every 3 seconds and freezes for about 2seconds. What to do????

Hi yenbaluyut
Welcome to BlackBerry Support Forums
Have you tried a Battery pull Restart on your BlackBerry ?
Please do it by removing the Battery while your device is Powered On then wait for at least a minute then reinsert it back, your device may take a long reboot . After reboot please check if your current issue resolves.
If issue persists then you have to investigate it further ! That spining clock or hourglass appears when our device undergo low memory or if any application runs in the background. Sometime A battery pull restart is enough to resolve this issue, If we press and hold the Menu for a few seconds, it will pop up a screen which will show all running programs in the background ,generally five will always there ( Home, BBM, Message,Phone , Browser ) look if any other apps. are running.
Also Check the File Free at Options > Status > Check File Free , In addition have you enabled Memory Cleaner on your device? Options > Security > Memory Cleaner, is it enabled ? If it is then disable it because It is also responsible for device freezing and clocking.
If that doesn't help then you can follow this Knowledge Base article :
KB10307 : The Hourglass or clock symbol spins continuously on the BlackBerry smartphone
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

My iphone 4 show me a pop up every 10 seconds ( this accessory is not optimised for this iphone) please help me

my i phone show me a pop up every 10 seconds ( this accessory is not optimized for this iphone) how can i fix this prob,; please i need for help

The "not optimised" message is often caused by dirt or debris in the sync port at the bottom of the phone. Have a close look in there and clean out (very carefully) if necessary.

Scripting WLC show commands (ie show client detail) every x seconds/minutes

Is there a simple way to script using either a terminal client (putty, teraterm, etc.) or Prime Infrastructure whereby I could set up a set of commands to be run at a certain interval?
I want to conduct some client testing roaming across a site whilst some how performing a show client detail every 15 seconds and a show run-config every 30 minutes?
TIA,
Nick

Is there a simple way to script using either a terminal client (putty, teraterm, etc.) or Prime Infrastructure whereby I could set up a set of commands to be run at a certain interval?
Yes you can.
The easiest method is to use console. You can knock up a script to run the command at specific intervals and log the outputs. If you do this, you must ensure the console timeout is expanded.
Another option is to create a PERL script (using KRON) to telnet/SSH into the appliance and run the command and retrieve the results.

While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?

While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?

Mike,
Thank you for taking the time to look at my app. This is my last major stumbling block that I have to resolve for this and other forms in the app.
Actually, I did use the Form Wizard for Auto DML to originally create the form. It was great. It created most of the Buttons, Items and Validations automatically (basically most of the page). I just needed to create some Processes and Computations. Two of which were the Processes to update the 'create_dt' and 'created_by' fields and 'update_dt' and 'updated_by' fields. The Create process updates the fields just fine.
However, my problem seems to be that the Hidden 'create_dt' and 'created_by' fields aren't picking up the values from a record that is being editted. Then when I attempt to save the record those fields are NULL, causing the DB NOT NULL constraint to throw an exception for those fields. In the back of my mind I seem to remember seeing some post stating something to the effect that the information in fields with a Source Type of Database Column is just displayed and does not affect Session State items.
Even with that, I am still wondering just why the 'created_by' Page Item shows the value that is in the DB record being updated, but the 'create_dt" does not (as can be seen in my first posting). It is the 'create_dt' Page Item (:P205_CREATE_DT) not having the DB records 'create_dt' info in it that appears to be the problem.
Thanks,
Tom

Problem showing values for JProgressBar!!

Hi there!!
I'm having two classes,one named TestProgressBar which contains a JProgressBar whose values I want to increment for every specific calculated value and the second named showTable which defines the table model for a table structure I'm showing in the frame of TestProgressBar.In fact I'm trying to load the values of an in-class defined array into the table but I want to do it in a way that after every line shown in the table my JProgressBar increments the percentage of lines shown,,e.g I have 4 rows to populate and after 1 line has been shown in the table,the percentage out of 4 lines checked becomes 25%,,so I want the JProgressBar to show 25%,,then come back,,show the second line in the table and increment the JProgressBar to the next calculated percentage,,which in this case wud be 50%...I'm attaching my code for the two classes here,,
/////////////////TestProgressBar/////////////////////////////////
import javax.swing.JTable;
public class TestProgressBar extends javax.swing.JFrame implements Runnable{
    static int rowsCheckedPercentage;
    static int noOfRows;
    static int currentRowNumber;
    int[] arr={1,2,3,4};
    /** Creates new form TestProgressBar */
    public TestProgressBar() {
        initComponents();
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" Generated Code ">
    private void initComponents() {
        jScrollPane1 = new javax.swing.JScrollPane();
        jButton1 = new javax.swing.JButton();
        jProgressBar1 = new javax.swing.JProgressBar();
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        jButton1.setText("Click");
        jButton1.addMouseListener(new java.awt.event.MouseAdapter() {
            public void mouseClicked(java.awt.event.MouseEvent evt) {
                jButton1_Clicked(evt);
        jProgressBar1.setStringPainted(true);
        org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
        getContentPane().setLayout(layout);
        layout.setHorizontalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(layout.createSequentialGroup()
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                    .add(layout.createSequentialGroup()
                        .add(198, 198, 198)
                        .add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 98, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                    .add(layout.createSequentialGroup()
                        .addContainerGap()
                        .add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 470, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                    .add(layout.createSequentialGroup()
                        .addContainerGap()
                        .add(jProgressBar1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 470, Short.MAX_VALUE)))
                .addContainerGap())
        layout.setVerticalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                .add(41, 41, 41)
                .add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 220, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .add(16, 16, 16)
                .add(jProgressBar1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 30, Short.MAX_VALUE)
                .add(jButton1)
                .addContainerGap())
        pack();
    }// </editor-fold>
    private void jButton1_Clicked(java.awt.event.MouseEvent evt) {
        run();
     * @param args the command line arguments
    public void run()
        showTable tableModel=new showTable();
         table=new JTable(tableModel);
         System.out.println("No. of rows"+table.getRowCount());
         noOfRows=table.getRowCount();
         for (int i=0;i<arr.length;i++)
            table.setValueAt(arr,i,0);
table.setValueAt(arr[i],i,1);
table.setValueAt(arr[i],i,2);
table.setValueAt(arr[i],i,3);
currentRowNumber=i;
try
Thread.sleep(2000);
new Thread(new thread2()).start();
catch (InterruptedException ex)
ex.printStackTrace();
jScrollPane1.setViewportView(table);
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new TestProgressBar().setVisible(true);
public class thread2 implements Runnable{
public void run()
System.out.println("Thread for JProgressBar");
rowsCheckedPercentage=(currentRowNumber+1)*100/noOfRows;
System.out.println("**Percentage checked "+rowsCheckedPercentage);
jProgressBar1.setValue(rowsCheckedPercentage);
jProgressBar1.repaint();
// Variables declaration - do not modify
private javax.swing.JButton jButton1;
private javax.swing.JProgressBar jProgressBar1;
private javax.swing.JScrollPane jScrollPane1;
// End of variables declaration
private javax.swing.JTable table;
//////////////showTable//////
* showTable.java
* Created on May 28, 2007, 3:37 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
* @author Kamran
import javax.swing.table.*;
public class showTable extends AbstractTableModel{
    public showTable()
    /** Creates a new instance of showReults */
    private String[] columnNames = {"Col1","Col2","Col3", "Col4"};
    private Object[][] data = {
    public int getColumnCount() {
        return columnNames.length;
    public int getRowCount() {
        return data.length;
    public String getColumnName(int col) {
        return columnNames[col];
    public Object getValueAt(int row, int col) {
        return data[row][col];
    public Class getColumnClass(int c) {
        return getValueAt(0, c).getClass();
     * Don't need to implement this method unless your table's
     * editable.
    public boolean isCellEditable(int row, int col) {
        //Note that the data/cell address is constant,
        //no matter where the cell appears onscreen.
            return false;
     * Don't need to implement this method unless your table's
     * data can change.
    public void setValueAt(Object value, int row, int col) {
        data[row][col] = value;
        fireTableCellUpdated(row, col);
}One more problem associated with it is that the first percentage values being shown in the console is 50% not 25%,,don't get what's the problem for it,,though this values when calculated inside the JProgressBar's run() method gives me right values,,i.e 25,50,75,100..
Can anybody please help??Thanks in advance,,,,,

Project definition values appear fine as expected in CN41 .
Is that mean that you have created a new custom fields for project definition using an exit? Are you able to view those fields in CN41 report? Please confirm.
Because, there is a thread available now, where a user is not able to see project definition custom fields in CN41 report. You reply may help him.

Lion Sever: getting "collabd_localhost.crash" every 10 seconds

I just upgraded to lion and then to installed the lion server on my iMac 24" 2.8 Core 2 Duo - I have 4 GB RAM, but as soon as I boot up my free RAM drops to less than 2 GB and keeps dropping.
Console shows System log and Crash reporter pumping out a "collabd_localhost.crash" report every 10 sends or so.
I also had several other servermgrd_localhost.crash reports and several "shutdownStalls"
for mds, diskarbitrationd, postgres, prl_disp_service, prl_net_start and sh.
Anybody else having similar problems?
Let me know if you'd like to see any of theses logs - I'll PM them to you.

Update: I'm really thinking that I'm going to restore to a previous TM backup. How do we do that now without an installatin disk?
This is what console is spitting out every 10 seconds:
7/23/11 1:06:50.855 PM com.apple.collabd: terminate called throwing an exception
7/23/11 1:06:51.000 PM kernel: nstat_lookup_entry failed: 2
7/23/11 1:06:51.623 PM com.apple.launchd: (com.apple.collabd[7839]) Job appears to have crashed: Abort trap: 6
7/23/11 1:06:51.623 PM com.apple.launchd: (com.apple.collabd) Throttling respawn: Will start in 2 seconds
7/23/11 1:06:51.623 PM com.apple.collabd.notifications: /usr/share/collabd/server/ruby/lib/collaboration/service_client.rb:42:in `http_put': Server returned nothing (no headers, no data) (Curl::Err::GotNothingError)
7/23/11 1:06:51.623 PM com.apple.collabd.notifications:           from /usr/share/collabd/server/ruby/lib/collaboration/service_client.rb:42:in `http_put'
7/23/11 1:06:51.623 PM com.apple.collabd.notifications:           from /usr/share/collabd/server/ruby/lib/collaboration/service_client.rb:102:in `sendRequest'
7/23/11 1:06:51.623 PM com.apple.collabd.notifications:           from /usr/share/collabd/server/ruby/lib/collaboration/service_client.rb:153:in `execute'
7/23/11 1:06:51.623 PM com.apple.collabd.notifications:           from notifications.rb:145:in `initialize'
7/23/11 1:06:51.623 PM com.apple.collabd.notifications:           from notifications.rb:439:in `new'
7/23/11 1:06:51.623 PM com.apple.collabd.notifications:           from notifications.rb:439
7/23/11 1:06:51.636 PM com.apple.launchd: (com.apple.collabd.notifications[7841]) Exited with code: 1
7/23/11 1:06:51.636 PM com.apple.launchd: (com.apple.collabd.notifications) Throttling respawn: Will start in 9 seconds
7/23/11 1:06:51.700 PM ReportCrash: Saved crash report for collabd[7839] version ??? (???) to /Library/Logs/DiagnosticReports/collabd_2011-07-23-130651_localhost.crash
7/23/11 1:06:53.646 PM Firewall: collabd is listening from 127.0.0.1:4444 proto=6
7/23/11 1:06:53.697 PM Firewall: collabd is listening from ::1:4444 proto=6
7/23/11 1:07:01.672 PM com.apple.collabd: 2011-07-23 13:07:01.671 wikiadmin[7854:307] Updating schema...
7/23/11 1:07:01.676 PM com.apple.collabd: 2011-07-23 13:07:01.675 wikiadmin[7854:307] Schema updates completed.
7/23/11 1:07:01.776 PM CoreCollaborationServer: [CSContentService:4645 40a280 +0ms] No localized text found for key 'default_content.server_home.title'
7/23/11 1:07:01.777 PM com.apple.collabd: Jul 23 13:07:01 icmp.private CoreCollaborationServer[7849] <Warning>: [CSContentService:4645 40a280 +0ms] No localized text found for key 'default_content.server_home.title'
7/23/11 1:07:01.798 PM CoreCollaborationServer: [PGCConnection:122 40a280 +0ms] Error in TXN: Error executing query [INSERT INTO entity_changesets (uid, entity_uid_fk, entity_revision, change_type, change_action, change_fields, change_data_bin, change_time, change_user_fk) VALUES ($1, $2, $3, $4, $5, $6, $7, $8, $9)]: ERROR: time zone displacement out of range: "2011-07-23 13:07:01.761+064204"
          0   CoreFoundation                      0x00007fff90953986 __exceptionPreprocess + 198
          1   libobjc.A.dylib                     0x00007fff95d13d5e objc_exception_throw + 43
          2   PostgreSQLClient                    0x000000010fb8e92c -[PGCConnection executeQuery:withParams:] + 0
          3   PostgreSQLClient                    0x000000010fb8f2bd -[PGCConnection executeUpdate:withParams:] + 787
          4   CSService                           0x000000010fb0d489 __57-[CSContentService _internalCreateEntity:asUser:withACL:]_block_invoke_0 + 1416
          5   PostgreSQLClient                    0x000000010fb8e5c5 -[PGCConnection transactionInBlock:] + 25
          6   CSService                           0x000000010fb0cef2 -[CSContentService _internalCreateEntity:asUser:withACL:] + 577
          7   CSService                           0x000000010fb21a78 __88-[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:andLanguage:]_block_inv oke_0 + 540
          8   PostgreSQLClient                    0x000000010fb8e628 -[PGCConnection transactionInBlock:onError:] + 91
          9   PostgreSQLClient                    0x000000010fb8e5c5 -[PGCConnection transactionInBlock:] + 25
          10 CSService                           0x000000010fb2182a -[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:andLanguage:] + 220
          11 CSService                           0x000000010fb21ca9 -[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:] + 165
          12 CSService                           0x000000010fb21edd -[CSContentService createEntitiesFromTemplate:] + 93
          13 CSService                           0x000000010fb22317 -[CSContentService init] + 785
          14 CSService                           0x000000010faf5fd7 -[CSLocalServiceLocator _locateServiceInMainThread:] + 228
          15 CoreFoundation                      0x00007fff9094311d -[NSObject performSelector:withObject:] + 61
          16 Foundation                          0x00007fff97b97830 __NSThreadPerformPerform + 214
          17 CoreFoundation                      0x00007fff908c2241 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 17
          18 CoreFoundation                      0x00007fff908c1aad __CFRunLoopDoSources0 + 253
          19 CoreFoundation                      0x00007fff908e88d9 __CFRunLoopRun + 905
          20 CoreFoundation                      0x00007fff908e8216 CFRunLoopRunSpecific + 230
          21 CoreFoundation                      0x00007fff908f7f2f CFRunLoopRun + 95
          22 collabd                             0x000000010faa96d2 main + 357
          23 collabd                             0x000000010fa8b734 start + 52

Help MSI GE60 Fan keeps spinning to 100% and down every 10 seconds.

Hello,
I just bought an MSI GE60 and after 4 days of using, The fan keeps spinning up and down every 10 seconds even when nothing is running on the laptop. Have tried updating the BIOS and the drivers, but no change.
Every time i turn on my laptop this always happen. It goes on when my laptop is on. Even if im not doing anything it still keeps spinning up and down. I checked the temperature and its at 40+ C and my CPU usage is normal. Basically im not doing anything and it keeps doing this fan spin up and down.
Even when the cooler boost is on or off, its still does the same thing, the fan keeps spinning up to 100% and down.
Do you think this is a software issue or hardware? It is very annoying to hear the fan go 100% for 10 seconds then back to normal then back to 100% speed again and when i press cooler boost it doesnt do anything. So even tho the cooler boost button is off, it still keeps doing the 100% fan speed and back to normal again. It keeps repeating.
Can anyone help me solve this problem please? Thank you very much.

Quote from: reprieve.nagrand on 03-May-13, 08:35:31
I have already tried uninstalling the S-bar and SCM drivers but still getting the fan noise. Also tried the no-battery and no-power reset for more than 24 hours but still having the same problems. The only thing that worked was changing the values in the RWeverything software. The only problem here is that it will work only until I shutdown the laptop. Once I do a cold boot I have to redo the RWeverything changes again.
@reprieve.nagrand
thanks for your case. Can I ask you a few questions more, please?
1. According to your model id your notebook came with just FreeDos, right? Could you please enter the Bios and go to System Information to confirm that you are using Bios 10F and EC version 14.04 (or 4.04)?
2. I urgently need a screenshot of your EC-Page within RWeverything after a cold boot without any modifications. Please try to make the screenshot at that time, when you can barely hear the fan anymore during the spin-on / spin-off cycle.
3. CoolerBoost: with a laptop that has been sitting idle for at least 20mins since last cold boot (no load, please!), can you turn on coolerboost by pushing the button somewhere to the left of the Powerbutton and let coolerboost run for at least 30 seconds. Then turn coolerboost off again and wait for the fan to slow down. Does the fan run continously after applying coolerboost or does it enter its off/on-cycle again. Please try it for at least 5 times and repeat it during other Windows sessions for two times. If this trick works, you are the man to make the video! Please help me out here. Please note, that the coolerboost trick will only work until there is load on the system again. If the fan speed picks up again due to load and slows down again, it will enter the annoying pattern, again.
4. While still reviewing the case and going through my notes, I came across an entry that I reflashed the EC-Controller with the same firmware one or two nights before the problem disappeared. This happened after uninstalling S-Bar and SCM earlier. So, if you are familiar with DOS-Flashing using USB-Sticks you could try to reflash the EC-Controller, than remove all power sources for at least 20 mins. If anyone else is experiencing the problem, please go ahead and report your findings. But please do the reflash only if you are familiar with such things and of course, please do so on your own risk!
Current status and work in progress:
As I haven't gotten hand on a video proofing that simply pushing the coolerboost fan button makes the problem temporarily go away, I am still stuck on there. The coolerboost solution works until the system load increases so much, that the fan level has to be raised. When the system load goes back to idle again, the fan level decreases and enters the off/on-cycle again.
The good news is I managed to customize a programm called fan control tools to somehow automatically apply the changes in RWeverything via a small GUI. This tool will also allow you to set fan profiles for Office, Games, etc. The bad news is, that this will trigger UserAccountControll at least once and it doesn't reapply after a cold boot or returning from hibernate, yet. I am now currently working on a solution that allows the new fan values to be set by Windows automatically using a batch file. This will apply the new values after a normal Windows boot, but not when returning from hibernate, though.
However, if you have found your remedy value for the fan issue within RWeverything, you can turn to Svet in the subforum "Notebook Modified & Private BIOS'ses & EC-FW". He will certainly be able to create you a custom EC-FW with those values written permanently in it.
My case:
The fan problem with my notebook has not (yet) returned. It has been running without S-Bar/SCM just fine. It can even process all fan profile alterations I have made. So, am I just lucky? While I do believe, that the fans of those notebooks experiencing the issue could be "somewhat odd", I find it hard to believe that my fan really suffered a mechanical problem. Without doing anything mechanical wise, my problem went away.
@Warner: I promised to present more videoproof of the case, but unfortunately I haven't managed to get a hold on a suitable video, especially since my unit has been running fine for the last weeks. Please be patient, if I have enough evidence I will post it asap.
One question bothers me though: looking at the EC-page of RWeverything, I was wondering if these are really all values, that the EC handles and checks. Are there any other values, variables that the EC manages and that are not displayed on the EC-page of RWeverything? The reason for asking this, is because I have a video showing the ECpage of RWeverything while the fan does his off/on-cycle and you can clearly see the RPMvalue correspond to the actions of the fan. As you pointed out, the boosts occur because the EC is missing a fan signal, I could clearly see the RPM value at offset 0xCD respond to the actions of the EC. If the controller looks for that value only, it should surely see the RPMs of the fan, as I can see them in RWeverything. So, I was wondering if the EC has other values not shown in RWeverything, that determine if the EC should enter the boost cycle?
While having another look at that video again, to me it appears as if the EC does this really on purpose. It tries to reduce the voltage of the fan to a point so low, that the fan simply starves. Then it boosts the fan up again. The only question is: why does the EC do that? Is there a leftover setting inside the EC - perhaps from another notebook - where such low RPMs were achievable?
You can find the video here in this zip-file: http://www.file-upload.net/download-7371226/MSI.rar.html
In the zip-file you will find three numbered videos, the first one is the most interesting as it shows the annoying fan cycle while the laptop is running idle. In the second one, the user put load on the system using prime95. The third one shows the system while it cools off again after prime95 has been stopped. Sadly, the video is too short as the system doesn't reach its lowest fan state again. The videos were taken in march in Germany, so the ambient temperature is around 20-21 °C or less (normal room temperature in Germany).
Regards,
jku

MacBook Pro freezes every few seconds

Hi All,
My two year old MacBook Pro started freezing randomly one day. It happens with any application that I have open (Safari, Word, Finder), I get the beach ball every few seconds for any operation I try doing. When the cursor comes back I have seen spikes of CPU usage and the relevant program also shows as 'Not Responding'.
I have tried everything, PRAM/SMC resetting, hardware test, disk repair etc. The latest being a clean install of Mavercks. It was fine for a few hours until it started freezing again like before. I made sure not to install much and didn't even copy my backup over yet. Here is my EtreCheck output, can someone please HELP!!
EtreCheck version: 1.9.12 (48)
Report generated 30 June 2014 22:30:19 GMT+5
Hardware Information:
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 8:1:9
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (519.34 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents:
[loaded] com.google.keystone.agent.plist Support
User Launch Agents:
[failed] com.adobe.ARM.[...].plist Support
[failed] com.nero.HSMMonitor.plist Support
User Login Items:
iTunesHelper
Dropbox-PG
Dropbox
Tunnelblick
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.1.0 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
WebEx64: Version: 1.0 - SDK 10.5 Support
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
      15% WindowServer
      7% mdworker
      2% Activity Monitor
      2% Dock
      1% SystemUIServer
Top Processes by Memory:
211 MB com.apple.WebKit.WebContent
188 MB Safari
123 MB com.apple.IconServicesAgent
90 MB Dropbox
74 MB mds_stores
Virtual Memory Information:
4.05 GB Free RAM
2.70 GB Active RAM
410 MB Inactive RAM
870 MB Wired RAM
552 MB Page-ins
0 B Page-outs

Thanks for your reply. Here's a portion of the console output during a particularly problematic time:
01/07/2014 12:33:37.914 com.apple.WebKit.WebContent[656]: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9812)
01/07/2014 12:33:38.743 Dock[183]: find_shared_window: Invalid depth WindowID 0x687
01/07/2014 12:33:39.351 com.apple.WebKit.Networking[422]: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9812)
01/07/2014 12:34:09.781 fontd[194]: ATSFindFolder timeout. (domain:-32763, dirType:'font', createFolder:false, ATSServer pid:194)
01/07/2014 12:34:11.764 Dock[183]: find_shared_window: Invalid depth WindowID 0x6ad
01/07/2014 12:35:04.047 com.apple.WebKit.Networking[422]: CFNetwork SSLHandshake failed (-9806)
01/07/2014 12:37:36.000 kernel[0]: MacAuthEvent en1   Auth result for: 64:66:b3:93:a6:e8 MAC AUTH succeeded
01/07/2014 12:37:36.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
01/07/2014 12:37:36.000 kernel[0]: wl0: Roamed or switched channel, reason #8, bssid 64:66:b3:93:a6:e8
01/07/2014 12:37:36.000 kernel[0]: en1: BSSID changed to 64:66:b3:93:a6:e8
01/07/2014 12:37:36.000 kernel[0]: AirPort: RSN handshake complete on en1
01/07/2014 12:39:34.215 Dock[183]: find_shared_window: Invalid depth WindowID 0x80f
01/07/2014 12:39:44.059 Dock[183]: find_shared_window: Invalid depth WindowID 0x834
01/07/2014 12:40:00.570 Dock[183]: find_shared_window: Invalid depth WindowID 0x858
01/07/2014 12:41:14.463 WindowServer[90]: disable_update_timeout: UI updates were forcibly disabled by application "Microsoft Word" for over 1.00 seconds. Server has re-enabled them.
01/07/2014 12:41:14.669 WindowServer[90]: common_reenable_update: UI updates were finally reenabled by application "Microsoft Word" after 1.21 seconds (server forcibly re-enabled them after 1.00 seconds)
01/07/2014 12:45:25.000 kernel[0]: MacAuthEvent en1   Auth result for: 64:66:b3:93:a6:e8 MAC AUTH succeeded
01/07/2014 12:45:25.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
01/07/2014 12:45:25.000 kernel[0]: AirPort: RSN handshake complete on en1
01/07/2014 12:45:25.000 kernel[0]: wl0: Roamed or switched channel, reason #8, bssid 64:66:b3:93:a6:e8
01/07/2014 12:45:25.000 kernel[0]: en1: BSSID changed to 64:66:b3:93:a6:e8
01/07/2014 12:46:01.496 Dock[183]: find_shared_window: Invalid depth WindowID 0x905
01/07/2014 12:46:57.825 com.apple.SecurityServer[15]: Killing auth hosts
01/07/2014 12:46:57.825 com.apple.SecurityServer[15]: Session 100012 destroyed
01/07/2014 12:50:06.454 com.apple.WebKit.WebContent[685]: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9812)
01/07/2014 12:50:08.330 com.apple.launchd[1]: (com.apple.qtkitserver[689]) Could not terminate job: 3: No such process
01/07/2014 12:50:08.330 com.apple.launchd[1]: (com.apple.qtkitserver[689]) Using fallback option to terminate job...
01/07/2014 12:52:41.749 WindowServer[90]: _CGXHWCaptureWindowList: No capable active display found.
01/07/2014 12:53:02.180 Dock[183]: find_shared_window: Invalid depth WindowID 0x9e1
01/07/2014 12:53:55.256 Dock[183]: find_shared_window: Invalid depth WindowID 0xa58
01/07/2014 12:53:58.964 Dock[183]: find_shared_window: Invalid depth WindowID 0xa6a
01/07/2014 12:54:44.057 Dock[183]: find_shared_window: Invalid depth WindowID 0xae9
01/07/2014 12:56:03.269 Dock[183]: find_shared_window: Invalid depth WindowID 0xb92
01/07/2014 12:56:26.912 Dock[183]: find_shared_window: Invalid depth WindowID 0xbc9
01/07/2014 12:57:24.560 Dock[183]: find_shared_window: Invalid depth WindowID 0xc17
01/07/2014 12:58:52.024 Safari[419]: Couldn't contact spell checker for Multilingual
01/07/2014 12:59:00.610 AppleSpell[353]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
01/07/2014 12:59:00.610 AppleSpell[353]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
01/07/2014 12:59:00.611 AppleSpell[353]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
01/07/2014 12:59:00.612 AppleSpell[353]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
01/07/2014 12:59:00.614 AppleSpell[353]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
01/07/2014 12:59:22.496 Dock[183]: find_shared_window: Invalid depth WindowID 0xd1e
01/07/2014 12:59:37.440 AppleSpell[353]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
01/07/2014 12:59:37.440 AppleSpell[353]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
01/07/2014 12:59:37.441 AppleSpell[353]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
01/07/2014 12:59:37.441 AppleSpell[353]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
01/07/2014 12:59:37.441 AppleSpell[353]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
01/07/2014 13:00:16.000 kernel[0]: MacAuthEvent en1   Auth result for: 64:66:b3:93:a6:e8 MAC AUTH succeeded
01/07/2014 13:00:16.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
01/07/2014 13:00:16.000 kernel[0]: AirPort: RSN handshake complete on en1
01/07/2014 13:00:16.000 kernel[0]: wl0: Roamed or switched channel, reason #8, bssid 64:66:b3:93:a6:e8
01/07/2014 13:00:16.000 kernel[0]: en1: BSSID changed to 64:66:b3:93:a6:e8
01/07/2014 13:00:24.747 Dock[183]: find_shared_window: Invalid depth WindowID 0xd91
01/07/2014 13:00:28.448 Safari[419]: Error launching spell checker for U.S. English: Error Domain=NSCocoaErrorDomain Code=256 "The application “AppleSpell.service” could not be launched because a miscellaneous error occurred (OSStatus -1712)." UserInfo=0x60800027bdc0 {NSURL=file:///System/Library/Services/AppleSpell.service, NSLocalizedDescription=The application “AppleSpell.service” could not be launched because a miscellaneous error occurred (OSStatus -1712)., NSUnderlyingError=0x608000242e80 "The operation couldn’t be completed. (OSStatus error -1712.)"}
01/07/2014 13:00:28.448 Safari[419]: Suppressing further spell checker launch failure warnings

Macbook pro Display freezes and darkens every few seconds

Hey ,
I just bought my Macbook pro 15 inch late 2013 few months ago , I'm new to Apple products ,
My screen started freezing and darkening every 4 seconds , starting from when I power it , until I shut it down even If I don'tt run any programs
I can't move the cursor while it's freezing or do anything , but for example If I write any text , the text will show up when it unfreezes , and If I'm listening to music the sound doesn't freeze . I tried the safe mode , and reseting the PRAM and NVRAM , running disk utility in single user mode and said that everything is fine , I checked my hardware using apple hardware test and also said that everything is fine , I removed the flash player thinking that it may be the problem but nothing changed . I don't know what I'm doing because as I said I'm new to all of this but I tried random things and nothing seems to work , I would really appreciate any help .
PS. when I tried taking a screenshot of the screen when it freezes and darkens a little , it appeared normal in the screenshot .
Hardware Information:
          MacBook Pro (Retina, 15-inch, Late 2013)
          MacBook Pro - model: MacBookPro11,2
          1 2 GHz Intel Core i7 CPU: 4 cores
          8 GB RAM
Video Information:
          Intel Iris Pro - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:42:17
Disk Information:
          APPLE SSD SM0256F disk0 : (251 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 250.14 GB (200.02 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Internal Memory Card Reader
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          com.eltima.SyncMate.kext          (0.2.5b15)
          org.virtualbox.kext.VBoxDrv          (4.3.6)
          org.virtualbox.kext.VBoxUSB          (4.3.6)
          org.virtualbox.kext.VBoxNetFlt          (4.3.6)
          org.virtualbox.kext.VBoxNetAdp          (4.3.6)
Launch Daemons:
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] org.virtualbox.startup.plist 3rd-Party support link
          [System] rapiback.plist 3rd-Party support link
Launch Agents:
          [System] syncmateStarter.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
          [not loaded] org.virtualbox.vboxwebsrv.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          SpeechSynthesisServer
          Dropbox
Internet Plug-ins:
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          Picasa: Version: 1.0 - SDK 10.6 3rd-Party support link
3rd Party Preference Panes:
          FUSE for OS X (OSXFUSE) 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               2%          WindowServer
               1%          EtreCheck
               1%          locationd
               0%          sysmond
               0%          coreservicesd
Top Processes by Memory:
          336 MB          Finder
          336 MB          Safari
          172 MB          iTunes
          164 MB          Dock
          156 MB          softwareupdated
Virtual Memory Information:
          1.68 GB          Free RAM
          4.74 GB          Active RAM
          615 MB          Inactive RAM
          989 MB          Wired RAM
          555 MB          Page-ins
          0 B          Page-outs

After the PRAM reset did you reboot the MBP and the projector?
If not, connect and power up the projector, the power up MBP.
The monitor itself could be on the way out, is there another monitor you can check it on.
Another thing you can try is a VGA cable with the DVI adapter and see if that performs better.
You can also try a different cable, since it worked fine in the past, I'm just trying to help you.
check some of these out:
http://support.apple.com/kb/TS4045
http://support.apple.com/kb/HT3382
http://support.apple.com/kb/PH7342
http://support.apple.com/kb/PH7219
I hope you can find something here, it's hard to source problems when the device(s) are not in front of you.
Let me know how this works for you,
All the best

My macbook pro freezes every few seconds

Hi everyone!
About a week ago my MBP started freezing every few seconds showing the well known spinning beach balls every time, even when running no apps, I've sepnt plenty of time looking for a solution, I've read this problem might be due to a physically damaged hard drive, bt I've tested it several times using different apps and it shows no error, I've read from another discussion about Etrecheck as a useful app to quickly gather certain system information that may help point to a cause of this problem, so I hope some of you guys can help me checking the log output. Here it is:
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.4 GHz Intel Core i5 CPU: 2 cores
          8 GB RAM
Video Information:
          NVIDIA GeForce GT 330M - VRAM: 256 MB
          Intel HD Graphics - VRAM: 288 MB
Startup Items:
          Digidesign Mbox 2 - Path: /Library/StartupItems/Digidesign Mbox 2
          DigidesignLoader - Path: /Library/StartupItems/DigidesignLoader
          HWNetMgr - Path: /Library/StartupItems/HWNetMgr
          HWPortDetect - Path: /Library/StartupItems/HWPortDetect
          M-Audio FireWire Audio Helper - Path: /Library/StartupItems/M-Audio FireWire Audio Helper
          M-Audio Firmware Loader - Path: /Library/StartupItems/M-Audio Firmware Loader
          PACESupport - Path: /Library/StartupItems/PACESupport
System Software:
          Mac OS X 10.7.5 (11G63) - Uptime: 0 days 5:1:32
Disk Information:
          TOSHIBA MK5055GSXF disk0 : (500.11 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    HD MACINTOSH (disk0s2) /: 499.25 GB (310.21 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R UJ-898
USB Information:
          Apple Inc. iPhone
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. Built-in iSight
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.paceap.kext.pacesupport.snowleopard          (5.7.2)
          com.digidesign.iokit.DigiDal          (8.0.3f1)
          com.waves.driver.soundgrid          (2.0.0)
Problem System Launch Daemons:
          [not loaded] ftp-proxy.plist
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.digidesign.elevenrack.helper.plist
          [loaded] com.digidesign.fwfamily.helper.plist
          [loaded] com.m-audio.firewire.helper.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.waves.daemon.SoundGridProtocolService.plist
          [loaded] PACESupport.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS5ServiceManager.plist
User Launch Agents:
          [loaded] com.divx.agent.postinstall.plist
User Login Items:
          iTunesHelper
          ProFire Agent
          TrapsMonitor
3rd Party Preference Panes:
          Digidesign Eleven Rack
          DigidesignMbox2
          Digidesign Mbox 2 Pro
          DivX
          Flash Player
          Flip4Mac WMV
          Growl
          Java
          PreferencesPane
          PreferencesPane
          YAMAHA-USBMIDIPatch
Internet Plug-ins:
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          OVSHelper.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Top Processes by CPU:
               8%          Skype
               3%          firefox
               2%          WindowServer
               1%          EtreCheck
               1%          plugin-container
               1%          SGProtocolService
               0%          fontd
               0%          SystemUIServer
               0%          configd
               0%          aosnotifyd
Top Processes by Memory:
          836 MB firefox
          123 MB mds
          115 MB Skype
          82 MB    plugin-container
          66 MB    WindowServer
          57 MB    Finder
          57 MB    quicklookd
          41 MB    Dock
          41 MB    mdworker
          33 MB    coreservicesd
Virtual Memory Statistics
          4.77 GB Free RAM
          1.50 GB Active RAM
          881 MB Inactive RAM
          882 MB Wired RAM
          415 MB Page-ins
          0 B      Page-outs
Thank you very much for your help!

Hi Carolyn!
Thank yo very much for your help, I've done everything you suggested, but the spinning beach ball is still appearing every few seconds, I also created another admin account just to check and it showed the same behaviour. this is ehat I have now:
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.4 GHz Intel Core i5 CPU: 2 cores
          8 GB RAM
Video Information:
          NVIDIA GeForce GT 330M - VRAM: 256 MB
          Intel HD Graphics - VRAM: 288 MB
Startup Items:
          M-Audio FireWire Audio Helper - Path: /Library/StartupItems/M-Audio FireWire Audio Helper
          M-Audio Firmware Loader - Path: /Library/StartupItems/M-Audio Firmware Loader
System Software:
          Mac OS X 10.7.5 (11G63) - Uptime: 0 days 0:12:0
Disk Information:
          TOSHIBA MK5055GSXF disk0 : (500.11 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    HD MACINTOSH (disk0s2) /: 499.25 GB (310.02 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R UJ-898
USB Information:
          Apple Inc. iPhone
          Apple Internal Memory Card Reader
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.digidesign.iokit.DigiDal          (8.0.3f1)
          com.waves.driver.soundgrid          (2.0.0)
Problem System Launch Daemons:
          [not loaded] ftp-proxy.plist
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [failed] com.digidesign.elevenrack.helper.plist
          [loaded] com.digidesign.fwfamily.helper.plist
          [loaded] com.m-audio.firewire.helper.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.waves.daemon.SoundGridProtocolService.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS5ServiceManager.plist
User Launch Agents:
          [loaded] com.divx.agent.postinstall.plist
User Login Items:
          iTunesHelper
          ProFire Agent
          TrapsMonitor
3rd Party Preference Panes:
          DivX
          Flash Player
          Flip4Mac WMV
          Java
          PreferencesPane
          PreferencesPane
          YAMAHA-USBMIDIPatch
Internet Plug-ins:
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          OVSHelper.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Top Processes by CPU:
               2%          WindowServer
               1%          SGProtocolService
               1%          EtreCheck
               1%          firefox
               1%          SystemUIServer
               0%          fontd
               0%          iTunes
               0%          configd
               0%          usbmuxd
               0%          Finder
Top Processes by Memory:
          287 MB firefox
          131 MB iTunes
          74 MB    mds
          57 MB    WindowServer
          57 MB    Finder
          33 MB    Dock
          25 MB    coreservicesd
          25 MB    SystemUIServer
          25 MB    plugin-container
          25 MB    EtreCheck
Virtual Memory Statistics
          6.11 GB Free RAM
          916 MB Active RAM
          202 MB Inactive RAM
          817 MB Wired RAM
          222 MB Page-ins
          0 B      Page-outs
Do you have any idea about something else to be done?
Thank you very much for you time

Show value every 10 seconds

Similar Messages

Maybe you are looking for