Show View doesn't display the views present in the report.

I add a section to the dashboard page. I add a report into the section which has pivot / graph and table view. But, when i click on the reports -> properties - > show view, I don't see any of the views. Why is it so?
Please let me know.
Thanks

Hi Vinutha,
Seems you have not saved the report after viewing result in other views.
Just run them in other views and save it.. go to dashboards now and check

Similar Messages

Album Art doesn't display in all cd in the Zen Visio

Album art doesn't display in all cd in the Zen Vison M . I have 649 cd and most of them display correct on ZEN Vision M. But some doesn't , I try to delete de Cd and rip it again and add the album art it didn't work for some reason some of the albums does not dipslay. The album art shows in Zen Explorer but not on the Zen vision M. Do you know why. I also try to get the Cover enlarge 200x200 or larger 500x500 but still odesn't work please any help. I had read all the suggestion in the forum also and follow suggestion but it doesn't work.
Take Care
AussieDog

If you select multiple songs and choose Get Info, the Album Art box will always be blank, even if the individual songs each have the same common Art. This is expected behavior.
Copying the Art directly to the iPod will never work. If your iTunes displays the Art fine, and the nano doesn't, your problem is likely to be a firmware issue with the iPod. I would suggest performing a "restore" and then try again. Otherwise, if issues remain, reinstall iTunes if more than one XP user is affected.

Option Click on the Volume menubar icon doesn't display ALL airplay devices, just the last one used

Option Click on the Volume menubar icon doesn't display ALL airplay devices, just the last one used. I've seen other peoples display all their devices. Why can't I?

I've discovered that those screenshots where you see more than one speaker listed in the menubar icon are actually bluetooth devices, not airplay. When you check the shot of the system preferences pane and see them all listed there too, the Type says Bluetooth. Not sure why bluetooth gets them all listed and apple's own airplay standard does not. Hope a developer writes a mac app to do it!

How to read the string present in the captcha?

hi all,
Can anyone help me out to read the string present in the captcha.
When a user registers an ID or stuff the user is prompted to enter the image shown.
i need a code to read the string present in the captcha image.
hope u get my point.please help me out in coding out for the above.
Thanks,
vish

so dude basically u r trying to make a spam engine?!
do u think any1 would help u here ? lol
by the way why do u really need that code ? what are ur intentions ? lol

Viewer doesn't display correct frame from multicam. Bug?

I'm able to create a multicam clip no problem for 3 clips. I've assigned my clips Camera Angle names and used Camera Angles for ordering the clips and automatic / audio synching to create the multicam clip. When I view the clips in the Event browser, playback in the Viewer is fine and matches if I switch angles, etc.. The angle editor is also all good. I then add the multicam clip to the Timeline to begin to make edits. In the Timeline, even before I try to make any through edits, i.e. cutting to a different angle, the viewer is no longer in sync with what is shown in the angle editor, which is correct. I even went back and removed all keywords (favorites) and analysis keywords (One Person, Medium Shot etc). in case they were causing the issue somehow. I deleted the multicam clip, and re-created it, no problem. But the viewer in the Timeline continues to be incorrect, though the angles are correct. So playback and export show the wrong frames. I should add that the audio is fine (which is from my primary clip), but the video (which is also from the same angle), continues to be incorrect.
Has anyone else encountered this or have an idea what would cause the playback in the Viewer to be out of sync when the multicam clip is just fine?
System info: Final Cut X 10.0.4 on Lion 10.7.4 on a Mac Pro 2.4GHz Xeon with 32GB of RAM

I've found the solution to this issue with Sastry's suggestion.
I had all the subreport section suppressed based on if the date value is null.
When i changed the subreport links to all parameters field and un suppress all the subreport sections, the data is displaying as it should be.
Thank you Sastry for your good tip on this one.
Regards,
Linda

Table style doesn't display when viewed or when project is published

I'm running RH8 (with RH8 Server). The table style no longer displays when viewed or when published. I checked the table style of the same project (but older version) and the styles to me looked the same. It displayed fine last week (famous last words), but this week something changed. Can anyone help?
The tablegradient.jpg can be seen in the project (image A), but when I view (eyeglasses), or if I open a published project, it doesn’t (image B).
Image A
Image B

I really do not know what has caused this but in your situation I would be looking at the CSS for the table now and when it worked.
After that I would probably create a new project and create the same setup afresh. That can often identify the cause of problems like this.
Sorry I don't have anything more constructive.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Form doesn't display Crystal Viewer

Hello,
I'm working with Crystal Report for Visual 2010, I have little experience working with crystal. The problem is, my application in the local machine displays correctly the report but when is running on the server the form doesn't display the crystal report viewer, neither displays any error. But the crystal report is generted correctly becuase the form has a button to send the roport by email and the report is sent correctly. I think the crystal report reports is well intalled in server because donsn't throw any error but something is missing.
Thank you, I hope somedoby can help me.

See if Kb [1605773 - CRVS2010 web viewer is not displying the Crystal report|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633303335333733373333%7D.do] will help.
The KB essentially supports what both Bhushan and Pooja indicated.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Design View Doesn't Display Correctly

I am new to this forum so hope I do things correctly!
I have Vista and am using Dreamweaver 8 to produce 4 of my
websites, but I am having trouble on my www.victorian-cards.com
site. All the files where I have the problem validate without
errors and display correctly in both IE and FF. I have nine files
with this problem. One of the problem pages is
http://www.victorian-cards.com/funny-cards2.htm
When I look at these nine files in the Design View, all I can
see are the correct picture at the top, the top and bottom
navigation, Google Search, and the footer. Where the body is I see
horizontal lines and </td>. The </td> is highlighted in
yellow. I thought perhaps I had a coding error, but it validates
without any errors.
Help! I sure would appreciate some words of wisdom. I can
work in the code, but I like to check the design view before I
upload my files.
I have read that a lot of people are having this problem. I
did try changing the magnification, but this did not help.
Jeanne
Victorian Cards

> Thanks for the quick reply. I tried this, but nothing
changed. Any other
> ideas?
>
> Jeanne
the page has html syntax errors- having to do with tr and td
tags.
Look at the code view in dw- see the yellow highlights??
It's probably just one error, find that one out and most of
the others will
be gone. There's too much stuff on the page for me to
sight-read the code
and find the error.
suggestion? Make a copy of the page, then start deleting
content so the
problem syntax error is more obvious. Delete working complete
tables to
isolate the problem one
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Workbook Displays Data Not Present in the Cube for Non-Cumulative KF

Hi All,
I have a user that is reporting using noncumulative info object 0TOTALSTCK. If I look in the cube, the data starts in October and goes from there. When viewing the data, there are figures that display for the months prior to October even though there is no data in the cube.
The interesting thing is that when viewed in excel using the analyser, these figures display using square brackets. This is then throwing out the total values of the prior months as they are being added in.
Does anyone have an idea why this value would display even though there is no data in the cube for it?
Thanks in advance for any help supplied.

Just thought I would share the solution to this.
It looks like the validity date for the cube was not set up properly. I fixed it using transaction RSDV.
Details on how to proceed can be found here:
http://help.sap.com/saphelp_nw70/helpdata/EN/02/9a6a1f244411d5b2e30050da4c74dc/frameset.htm

IPod plays music, shows artwork, doesn't display artist or song details

My iPod plays music, shows the artwork but doesn't display the artist or song details. I think someone has been messing with it, but i can't find any settings that let me switch the song details back on.
Can anyone help?
Thank you

Puch the center button to switch between volume -> scrubber -> rating -> artwork -> lyrics.

Panel doesn't display properly until I resize the frame

Hiya folks,
I'm currently trying to write a simple piece of music notation software. This is my first time using swing beyond a relatively simple JApplet and some dialog stuff. Anywho, I ran into a pretty discouraging issue early on. So far I've got a frame with a menu bar and a toolbar on the bottom border. The toolbar contains a button which should draw a new staff panel containing 11 panels (potentially more) within it, alternating between lines and spaces. Sort of like this:
import javax.swing.*;
import java.awt.*;
public class Staff extends JPanel {
   private static JPanel nsp1,nsp3,nsp5,nsp7,nsp9,nsp11;
   private static JPanel nsp2,nsp4,nsp6,nsp8,nsp10;
   private ImageIcon image= new ImageIcon(this.getClass().getResource( "icons/treble clef.gif"));
    public Staff(){
    setLayout(new GridLayout(11,1));
    add(nsp1= new NoteSpace());
    add(nsp2= new LineSpace());
    add(nsp3= new NoteSpace());
    add(nsp4= new LineSpace());
    add(nsp5= new NoteSpace());
    add(nsp6= new LineSpace());
    add(nsp7= new NoteSpace());
    add(nsp8= new LineSpace());
    add(nsp9= new NoteSpace());
    add(nsp10= new LineSpace());
    add(nsp11= new NoteSpace());
static class NoteSpace extends JPanel{
    public NoteSpace(){
    setPreferredSize(new Dimension(this.getWidth(),2));
static class LineSpace extends JPanel{
      public LineSpace(){
      setPreferredSize(new Dimension(this.getWidth(),1));
      public void paint(Graphics g) {
          super.paint(g);
          g.drawLine(0, (int) super.getHeight()/2, (int)super.getWidth(), (int)super.getHeight()/2);
}Anyway, this panel displays as a tiny box wherein nothing is visible until I resize the frame. Really frustrating. And I have have no idea what the problem might be. Here's the actionlistener:
jbtcleff.addActionListener(new ActionListener (){
        public void actionPerformed (ActionEvent e){
            staff.setBounds(50,panel.getHeight()/2,panel.getWidth()-50,panel.getHeight()/2);
            panel.add(staff);
            staff.repaint();
        });...which is located in a custom jtoolbar class within the Main class, an extension of JFrame:
public class Main extends JFrame{
   JMenuBar jmb=new CustomMenuBar();
   JToolBar jtb= new CustomToolBars("ToolBar");
   static boolean isStaff=false;
   static boolean isNote=false;
   static JPanel panel = new JPanel();
   private static Staff staff= new Staff();
    private static Toolkit toolkit= Toolkit.getDefaultToolkit();
   private static Image image=toolkit.getImage("C:/Users/tim/Documents/NetBeansProjects/ISP/src/MusicGUI/icons/treble clef.jpg");
    private static Cursor noteCursor = toolkit.createCustomCursor(image,new Point(0,0),"Image");
   public Main (String m) {
        super(m);
        setJMenuBar(jmb);
        getContentPane().add(jtb,BorderLayout.SOUTH);
        panel.setLayout(new CardLayout(60,60));
        getContentPane().add(panel);
public static void main (String[]args){
        JFrame frame= new Main("Music");
        frame.setSize(800,400);
        frame.setLocationRelativeTo(null);
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setVisible(true);
        frame.setIconImage(image);
       Sorry for all the code. I'm desperate.
Thanks!

Oh my... have you been through the Swing tutorial?
Let's look at some of your code,
static class NoteSpace extends JPanel{
    public NoteSpace(){
    setPreferredSize(new Dimension(this.getWidth(),2));
static class LineSpace extends JPanel{
      public LineSpace(){
      setPreferredSize(new Dimension(this.getWidth(),1));
      public void paint(Graphics g) {
          super.paint(g);
          g.drawLine(0, (int) super.getHeight()/2, (int)super.getWidth(), (int)super.getHeight()/2);
}Here, NoteSpace and LineSpace are being set to a preferred size of 0x2 pixels, and 0x1 pixels respectfully. If you want them at 0 width, how do you expect them to show? In particular, NoteSpace isn't doing anything special. It's just a panel. Why an inner class? Lastly you should not override paint() for SWING. That's AWT stuff. For Swing, you override paintComponent(Graphics g) .
Then we have this
jbtcleff.addActionListener(new ActionListener (){
        public void actionPerformed (ActionEvent e){
            staff.setBounds(50,panel.getHeight()/2,panel.getWidth()-50,panel.getHeight()/2);
            panel.add(staff);
            staff.repaint();
        });I'm not sure what the variable jbtcleff is, but it seems you are adding your Staff panel to "panel" every time a button is pressed.... why? Why not just add it once (outside the action listener) and be done with it. Your panel object has a CardLayout, so I assume you meant to create a new+ staff panel everytime a button is pressed, and then add it to the card layout panel. Even so, setBounds(...) does not seem pertinant to this goal. (In fact, in most situtations the use of setBounds(...) is the antithesis of using layout managers).
The problem you mentioned though seems to be related to the use of a JPanel (your Staff class) that adds zero-width compontents to a grid array.

Data not getting displayed in controls present in the tabs

Hi,
I am facing problem in binding data to different controls
exisiting in different tabs of a page from database. I can see the
values of the controls in first tab, but not in other tabs. And at
the same time, I can get the values of the datagrid even if is
present in the later tabs....
please guide me......

To do what you want, set creationPolicy="all" on the
TabNavigator.

How to delete the record in the file present in the application server?

Hi,
I have two questions.
i) How can I delete a record based on some condition in the recordx in the file that is present in the application server?
ii) How can I lock the users whiel one user is accessing the file on the application server?
Thanks in advance.
Suvan

Hi,
If u want a frequent deletion this approach to delete a record from a file will havee unnecesary copy of records from one file to another and deletion of one file and renaming activities.
Instead what u can do is Add and field del_flag to ur record structure.
If u want to delete the record from a file just mark this del_flag as 'X'.
While processing u can have a loop like
loop at it_XXX where del_flag <> 'X'.
endloop.
This will logically delete the record.
When u r to finish the application at that time only perform this copying / deleting / and renaing activity
Hope this helps.
Cheers,
Nitin

How to find and replace the text present in the url

I have a column of type NCLOB with some text having url's in between as shown below:
========================================================================
This text is for testign purpose.This text is for testign purpose.
<A PL/SQL <U PL/SQL </U> </A>
Thsi text is also for testign purpose.This text is for testign purpose.
<A http://forums.oracle.com> <U oracle metalink> </U> </A>
This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.
========================================================================
Requirement:
========
Requirement is to implement the find and replace functionality.
I just need to check whether the search text is present in the url or not?
Suppose if search for orcale.com, since its part of the url so the search should be successful otherwise search should be unsuccessful.
Here I can give you the hint like, always the url lies between the anchor tags *(<A </A>).*
Tahnks in Advance.

I had I think a similiar question the other day thay I Frank and Michaels answered for me.
not sure if I totally have what you want but.
WITH t
        AS (SELECT '<A PL/SQL <U PL/SQL Thsi text is also for testign purpose.This text is for testign purpose.
<A http://forums.oracle.com> This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.
                      txt
              FROM DUAL)
SELECT REGEXP_SUBSTR (REGEXP_REPLACE (txt, '(.*<A)|(</A>.*)'), 'oracle.com')
FROM tthe first part the regexp replace part gets the text between a start and end point you mentioned that would be <A and </A>
the regexp substr just looks for the phrase oracle.com in the text between those two points.
Edited by: pollywog on Oct 6, 2010 8:26 AM

I want to create a new customized screen layout for responsive HTML5 output. I don't want to use the ones present in the gallery. What are the steps to do so?

I don't wish to use the ones already present in the gallery. They do not meet my requirements. Therefore, I want to create/design my own screen layout for the responsive HTML5 output. Please let me know the steps to do so. How to create a SLZ file, what is the code that I need to write. What are the components that I need to create to have a complete screen layout to be used in a responsive HTML5 output.

That would require inline formatting and I doubt that is an option.
If I am following you, the header area is full width of the screen so I cannot see how it can be broader, Perhaps you mean deeper? A screenshot might help here. The change would be made in the layout.css file.
That would be a change in the layout.css.
I suspect that too is controlled by the layout.css.
To make the changes you would have to go into the layout.css and modify that. As you will see, it is a very complex CSS and that is why I said creating you own layout is not easy. Hopefully when Willam is available again, he may be able to give you some more specific information.
I think Willam will confirm that if you cannot read the existing CSS to make those changes, then creating your own skin would be beyond your capabilities. Please do not take any offence there, I am simply emphasising how complex a task it is to create a skin from scratch. It's not one I would take on.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Show View doesn't display the views present in the report.

Similar Messages

Maybe you are looking for