Show Week 53 in BW report

Because of the way 2004 is setup, it appears to have a week 53. Does anyone have any experience displaying data for week 53 in BW?

Dirk,
Week 53 wasn't showing up at all. Realized fiscal year variant wasn't part of infocube - added fiscal year variant WKS ... resolved issue.
Thanks
Pam

Similar Messages

Why does it stop every few seconds for "buffering" when I try to watch the Daily Show and the Colbert Report?!

The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

Daily/weekly/monthly production reports

Hi Experts,
IMy client needs daily/weekly/monthly production reports with graphical representation. I want to know in acase there are any standard reports which will be a work around solution for the above said reports.
Thanks

Hi nandi6346,
Yes, COOIS : Order informaton system, it self gives graphical representation for production reports.
Go to COOIS - execute as per required date, to get grafical representation select the coloumns you required, e.g. Production order, target qty, Confirmed Qty, Delivered Qty, Scrap Qty, etc and the click on "Display Grafic" tab, it will show you grafical report.
Tara

Whenever I try to open Microsoft Word it doesn't open and shows me an error report!

Whenever I try to open Microsoft Word it doesn't open and shows me an error report! I don't know what to do! Help!!!!
This is the extra info that comes along with the error report:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2013-08-30 16:41:14 -0400
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.1.0.110310
Crashed Module Name: MBURibbon
Crashed Module Version: 14.3.4.130416
Crashed Module Offset: 0x000072f0
Blame Module Name: MBURibbon
Blame Module Version: 14.3.4.130416
Blame Module Offset: 0x000072f0
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
What should I do??????

It might be a good idea to also ask here:
Office for Mac forums

How to link Excel tabs so data shows up in one report

I have a huge excel file with 16 tabs (sheets) of data. Each tab has an excel speadsheet filled. I have the data in Crystal. Each tab shows up as a separate table. I've tried to link each in different ways but can only get one table to show up in the report. I want all the data in one report. If that's possible. It would be very large.

Graham,
Thanks for answering,
Yes I have the tables and can link them (have tried a couple of different ways) One has all the data fields linked between tables and the other way was to run them in series with just one field linked. Either way the Field Explorer on the right side of the screen shows each table and each table lists all the fields. But the problem is that the report only shows data from one table, not all the tables or all the data. The data that it shows is only from the table that I selected the fields from.
Hope this makes sense. Thanks

Excel is not showing multiple Drill thru report selection option

We have created 3 drill thru reports in EIS, excel is not showing Select Drill-Through Report Dialog Box when tying to acess drill thru reports. It defaultly executes the first drill thru report, we want it to list the available reports so that we can select accordingly after view/launch is selected.
essbase 7.1.6 version SQl server 2000

Hi,
This Prompt message would have been set in WAD(XHTML Coding section) in your old project. Now , you cross check your Web template for the same. Your issue will be resolved.
Regards,
Suman

Showing the XML publisher report in an iframe..

Hi all..
Please help me with this question.
Before: We had a "http page" and we are showing a XML Publisher report which is also in "http" ,in an iframe of the parent page. Previously it was working fine, as both are http.
*** Basically we are generating a URL of the report and showing it in a iframe of the web application****
Now: Recently we configured ssl to the parent page (https), and the report sever is still in "http". Because of this difference, whenever we are calling that report,it is showing a security alert and redirecting to totally wrong page.
Is there any configurations that i can do in the ""report server" to rectify this issue.Please help me with this issue.
Thank u

Hi Ravi ,
can i do it only with the xml Publisher , because when i tried it in the past and get all the staff like Template / DD / CP up and running and started the CR i get an error from the system that he is missing a report directly in the file system... so he searched for the report himself on system like a standard 6i Report. But the template and the dd is stored in the db. So my question again, can I use the XML Puplisher without a Standard Report or can i use a dummy file only for checking and after that he use my template / dd.
regards
Kay

How to show more than one report in a same Viewer or Form

Dear all,
I have develop many reports with CrystaReport XI and I'm using the CrystalReportViewer to show each of them in VB6. My Question is: Can I show more than one report in a same Viewer? if i need to show the report1.rpt and report2.rpt in a same window how can I do it?
Sérgio Salazar - Brazilian VB developer

No and Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

How to show more than one report in a same Form

Dear all,
I have develop many reports with CrystaReport XI and I'm using the CrystalReportViewer to show each of them in VB6. My Question is: Can I show more than one report in a Viewer? if i need to show the report1.rpt and report2.rpt in a same window how can I do it?
Sérgio Salazar - Brazilian VB developer

I once had a project which involved alot of reports and on my mind I had the same idea; to display all reports with only one crviewer but was not able to. Instead what Idid was to create say 10 forms with a viewer on each and if the user wanted to produce extra reports, they had to close some of them. This worked out for me.

Designed Reports are not showing in the Analysis Report List

Hello Master's,
I have designed one report as per our client requirement, and assigned also, but its not showing in the analysis reports list.May i know what setting needs be done to appear in the reports list?.
How to create and add the characteristics(New Fields) in the reports, here we can able to create and add the key figures.
Kindly update the solutions with steps.
For you reference please find the below screen shot.
Thanks in Advance......!
Kind Regards
Shankarappa H L

Hi Shankarappa,
The Analysis -> Reports shows a list of views. Hence, once you create a report you need to complete two mandatory steps.
1. Create a View
2. Assign Report
For more information, please refer to the following link: In conversation with Sebastine Augustine, product manager redefining Business Analysis that forms an integral part of th…
Thanks,
Sebastine

Paid Invoices are showing up in MRBR report

Hi all,
There are some 'R' Block and 'B' block invoices which are already paid by releasing them at the time of payment instead of releasing them in MRBR. But they are still showing up in MRBR report (Release blocked invoices). If an invoice is paid should they not automatically go away from MRBR?
Any input is highly appreciated!!
Thanks,
Avani.

Hi
R Block invoices should be released only through MRBR and then only invoice to be processed for payment. If it is done manually, MRBR will not automatically cleared, because as per system, that particular invoice has not complied with the settings maintained. Releasing the R block manually should not be encouraged from the client point of view.
Regards,
K Lakshmanan

Images not showing up in email reports

I have several reports set to email to myself and various managers every week. These reports have the company logo embedded in them. When I view the report on grid, it works fine but the emailed report only has an image placeholder instead of the actual image. Does anybody know how to fix this? Is it a bug with Grid?
By the way, I'm using version 10.2.0.4 on Windows Server 2003.

Well I think the problem may be that Oracle just doesn't play nicely with most email programs. I run linux on my desktop and use Thunderbird to check my email. This is where I was getting the problem. When I tried it on a Windows machine using Outlook, it worked just fine. To be thorough, I also checked it on Mail on my Mac and it came out pretty much unreadable.
So my guess is that Oracle made sure it worked on Outlook and then walked away. Disappointing from a company that claims to support open standars.
Anybody else have similar experiences?

Activity type origin text doesn't have been showed on Cost analysis report

I have defined three acitivities TMAQ, TMO, CIF. But the origin text column of these acitivities is not showing in cost Analysis report(althoug the origin is showed), i.e. when we go to an order & navigate to "Cost Analysis". TCODE:CO02 (Production order)
Anyone knows how to show the origin text ?
Thanks a lot for your comments.
Vero

Hi Veronica
I think maybe it´s missing the description in language you are running the report.
Check transaction KL03 to see if the activity type has the description in the language you are logged.
If not go to KL02 and update the description and try to run it again.
Regards
Fred

Weekly business catalyst report

Website hosted in BC. I think I changed something in BC because I don't receive the weekly business catalyst reports anymore. Could someone please guide me to what needs to be done to activate it.
Thank you.

You can remove the privacy statement from the workflow emails via folder: Layouts>>Outbound Emails>>> There are several workflow emails within this folder so just edit them.
As for the weekly report emails, my understanding is that you need to be a premium partner to be able to customise these...

How to Show Clob File in Report 6I ?

Hi i want to know how to show clob file in report 6i
Regards
Shahzaib ismail

In this situation I do not use headers at all. Insted of that I use union in a query :
select 'Firstname','Salary'
from dual
union all
select firstname, to_char(salary)
from employee;
The first record will work as header
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Suneel Vishwakarma ([email protected]):
Hello,
I want to generate excel format of my report. I did it using Delimited option but it was not same as it appears in my browser if I choose html format.all the labels repeat with each instance of the row .
Can you please give me the proper Solution.How should I proceed?
Thanks & Regds.
Suneel<HR></BLOCKQUOTE>
null

Inactive items show in the MRP Report

Inventory items marked as inactive show in the MRP report - 8.8, SP0, PL12. If there are requirements, they show regardless of whether or not Display Items without Requirements is checked. If there are no requirements and the Display Items without Requirements is checked, inactive items show too. Is this intentional? My customer wants to know this and doesn't understand why their inactive items are showing in the MRP Report.
Thanks
Sally Weinrauch

Hello Sally,
Did you check the following path:
Administration>System Initialization>General Settings-->Inventory Tab
Under this tab at the very last you have a checkbox " Display Inactive Items in Reports". Please uncheck this option and try running MRP again. Let us know if you still have questions.
Regards,
Praneeth

Show Week 53 in BW report

Similar Messages

Maybe you are looking for