Showing a module as completed in a LMS system

Hi Anyone
I am newish to captivate versin 4 but have been using it and creating programs successfully for about 3 - 4 months. I have had great help from this forum, but am in need of more help.
When i publish my program to the LMS (Learning Management System) it will not show completed on the status when the user has completed the course. I have spoken to the Technical Support department of the LMS system, and there doesn't seem to be anything wrong with their system. The did mention the following:
The module that i am publishing needs to have a finishing post to tell the course that it has completed.
I have looked through the setting for the program and variables etc and cant find anything refering to this... Can anyone help and give me some idea of how to do this......
Many Thanks
Steve

Hi there.
Good to talk to you again...... How are you???
I have tried to upload a picture but it wont let me stating that it is in the incorrect format. I tried it with bitmap and jpeg.
What i am doing is...
Select Publish to produce the module. zip folder is selected. Choose preferences, selct quiz, select reporting.
Setting the standard as SCORM. The Report status as complete/Incomplete. Report to LMS as percent. Choose Report Data to slide views only and slide view completion option to 100%. Reporting leve to show Intercations and score.
Does this make sense???
Steve

Similar Messages

  • ERROR: Module load completed but symbols could not be loaded for Adobe AIR.dll

    Does anyone know what causes this error? The application installed on my machine is using Adobe Air.dll version 2.0.3.13070
    This dump file has an exception of interest stored in it.
    The stored exception information can be accessed via .ecxr.
    (2b84.2908): Application hang - code cfffffff (first/second chance not available)
    eax=00000000 ebx=05105dbc ecx=0c013503 edx=00002b84 esi=77f15b70 edi=00000002
    eip=00a68972 esp=0012e03c ebp=00000000 iopl=0         nv up ei pl zr na pe nc
    cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00040246
    Unable to load image c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for Adobe AIR.dll
    *** ERROR: Module load completed but symbols could not be loaded for Adobe AIR.dll
    Adobe_AIR+0x58972:
    00a68972 8bec            mov     ebp,esp

    Hi,
    Check weather its right path or not.Even check the call interface,weather you are giving the right one or not.
    Regards,
    Srikanth

  • HT201269 I'm trying to restore my iCloud back up on my new iPhone 5s and keep getting "could not sign in your apple Id or password is incorrect. I noticed that the Id it's showing is not my complete email address. I've reset my password 5 times. It accept

    I'm trying to restore my iCloud back up on my new iPhone 5s and keep getting "could not sign in your apple Id or password is incorrect. I noticed that the Id it's showing is not my complete email address. I've reset my password 5 times. It accepts my password when I install as a new phone. How can I resolve this so I can restore my back up?

    Hello jwpg,
    Thank you for the details of the issue you are experiencing after restoring an iCloud backup.  I recommend the following articles for an issue like this:
    iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
    http://support.apple.com/kb/TS5207
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Marking "complete" in the LMS

    Is there a way to have a slide in a project and some how designate that that slide does not need to be visited in order to mark completion in an LMS?
    In my project, I would like to have a Resource page within my course that users can access "if they want/need to", then have that page take them back to their last visited page.
    However, not everyone will need to see this page and therefore not everyone will click to access it, ultimately affecting the LMS conmpletion status since some people won't view the slide.
    I'm trying to replecate a functionality in Articulate where there's a Resource tab users can refer to throughout the course.... 
    I've thought about changing the completion percentage in the preferences, but I'm concerned that isn't the best solution.
    any other ideas for this?

    If you are NOT on Captivate 6, you can use the TickTOC widget to have the Resources slide marked as complete regardless of whether or not it was visited.
    Trial version available here if you want to give it a go: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
    Unfortunately, Adobe changed something in Captivate 6 that means this widget cannot work in that version, but it will work in all versions from Cp4 to 5.5.

  • CSM - show run module # - diagnostic not supported

    Hi, I´d like to know why show run module # (where is CSM) doesn´t show anything that I´ve configured before. I have CSM 3.1(5) and IOS 12.1(19)E1 with SUP2 MSFC2. Is this supported or a Bug ?
    I also would like to know if it´s normal to appear not supported CSM module (6) when I use the command show module. This is because I can use CSM without problems. Is this supported or a Bug ?
    Router#show module
    Mod Online Diag Status
    1 Pass
    3 Pass
    4 Pass
    6 Not Supported
    Thank you !!

    Hi Joerg,
    There´s no problem with show run if you want to see CSM configuration, but if you use IOS 12.2(14)SX1 with SUP720 you can use the command show run module # (where is CSM) and appears what you want.
    I ´d like to know if this command is not supported with SUP2 and IOS 12.1(19)E1 or if it is a cosmetic Bug. I was searching in the Bug Toolkit and Release Notes and I didn´t find anything about it.
    Could you give me a link where I can see "online diagnostics are not supported for CSM" ?.
    Thank you.

  • Completed tracking in LMS

    We need to create settings in CP3 which will result in a
    tracking in our LMS reporting completed/non-completed. This should
    be based on a mastery score of 50%, ie if the student has completed
    minimum 50% of the frames/screens, he will see status completed in
    the LMS. This worked for us using RapidBuilder (swf flash files) in
    Webmentor LMS.
    Hope anyone can help. We are new to Captivate an are in
    desperate need to have this issue solved.
    Regards and Thanks, Nielsen

    We need to create settings in CP3 which will result in a
    tracking in our LMS reporting completed/non-completed. This should
    be based on a mastery score of 50%, ie if the student has completed
    minimum 50% of the frames/screens, he will see status completed in
    the LMS. This worked for us using RapidBuilder (swf flash files) in
    Webmentor LMS.
    Hope anyone can help. We are new to Captivate an are in
    desperate need to have this issue solved.
    Regards and Thanks, Nielsen

  • Safari 5.0.5 wont show Youtube modules, RSS feed, Adsense and Facebook module

    Safari 5.0.5 wont show Youtube modules, RSS feed, Adsense and Facebook module for my wesbite http://savingtherepublic.com I also have an audio track that autoplays when you visit the site the "player" doesnt appear on top left of my page under a speaker icon and audio doesnt play.
    BUT let me be clear everything works fine in Firefox?
    Anyone have any idea whats going on?
    I have done nothing but the system update for security that auto updater popped up for to do yesterday and today I did some Java update... again these 2 updates are for the Mac. I also did a flash player update. Everything was working fine yesterday absolutely no problems

    Just for further confirmation that the installation went through succesfully multiple times:

  • Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

    Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Report showing the number of active users in the system

    All,
    There is a standard SAP report which shows the number of active users in the system (output same as AL08).
    Does anyone remember this?
    Cheers,
    Bidwan

    Hello Bidwan, 
    Are you talking about the report RSUSR000?
    Regards.
    Ruchit.

  • While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation a

    While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again." How to resolve it.
    How do I modify the system.

    Hi Rgardezi,
    The only reason why Acrobat installation fails and throw this error message is when there are some services running in the background causing the installer not to complete the installation. My take is try the following steps and suggest if you were able to install the products or not :
    1) Navigate to control panel and confirm that there is no line Item that talks about Acrobat. If you see Acrobat XI listed there, please remove them.
    2) Perform a selective Start up using the steps mentioned in this link.
    Please suggest if the above mentioned steps were able to resolve the query for you or not.
    Cheers,
    Kartikay Sharma

  • PS CS5 The operation could not be completed. A file system I/O error has occurred

    Howdy...
    I'm using Photoshop CS5 and when I go to use a handful of filters such as Liquify or Lens Correction I am suddenly getting an error message saying:
    "The operation could not be completed. A file system I/O error has occurred"
    Doesn't matter if it's a massive file or a small one. Sometimes the Liquify box will actually come up, but after I make one or two strokes, the beachball comes up and moments later I get the error message again. It doesn't actually crash PS, it just prevents me from using those filters. Each time I click, the error message comes up again. I've also tried it with my PS CS3 on the same Mac and it does the same thing. However on my 4 year old MacBook Pro, it's absolutely fine. Grrrrr!
    I have my PS set as default on 64 bit. I have a scratch disk with nearly 500gb free (which is not my start-up disk) I am running a Mac Pro 2.8 GHz 8 Core Intel with 16gb of ram, so it's not a memory problem. Running Mac OS 10.6.7 but did the same on 10.6.6 too.
    I have repaired the disk permissions on the start-up disk. I have reloaded a fresh copy of PS (a few times). Even did a hard Un-install with maccs3clean after trying a regular Un-install with no success.
    I had an 1.5hr conversation with an Adobe Tech guy earlier today and he's scratching his head, so I'd thought I'd throw it open to you guys hoping someone has had the same problem and can save the rest of my hair from being pulled out.
    HELP!

    Hi Guys,
    I know this is an old post but I need to bump it.
    I work for a image processing company and we all sit on top spec mac pro's with 16-32 GB of RAM, top graphic cards and SSD drives.
    All of my collegaues' computers are working fine when it comes to using liquify and all of the filters that come with CS5, but it sure doesn't work on my mac at all.
    We have a tech guy who has re-installed the OSX on a new SSD drive now two times and we have started from scratch with installing CS5 but it still will not work. I keep getting "the operation could not be completed..." every time i try
    to liquify or do any other filter work.
    I am 100% sure it doesn't have to do with any disk permissions or broken drives in my case.
    Could there be an issue with the graphic card or any other hardware component since it's clearly not a software related issue?
    Any help would be much appreciated because we are very much in the dark here.
    Best regards,
    Anders

  • How to create a ListBox in module pool program in 3.1i system ?

    Hi All,
    How to create a ListBox of type module pool program in 3.1i system ?
    when i tried creating, the listbox option is disabled.
    Thanks in advance.
    Edited by: gulab zehra on Aug 20, 2009 1:26 PM

    Hi,
    please go through this...
    LIST BOX                    
          Drop down list box can be created in a dialog screen(SE51) as well as selection screen.
          In screen painter to create a input/output field into list box we use  'L" as a value for dropdown attribute for the i/o field.  In screen painter to determine the type of method that will be used to fill the value list we use the attribute value list. If it is blank, the value list will be filled by the first column of the input help assigned to the screen field. This input help can be defined in the ABAP Dictionary, on screen using SELECT,VALUES screen statements or in event POV (PROCESS ON VALUE-REQUEST ) and the input help that will be passed to the field should consists of 2 columns ,the key column is filled automatically by the system. SAP recommends value list field should be blank.
    or
    The value  can be 'A' meaning that the value list will be filled in the event PBO(PROCESS BEFORE OUTPUT) or before the screen is displayed.In this method we use function module VRM_SET_VALUES to fill the values and pass it to the i/o field. If a function code is attached to the list box the selection of a value triggers a PAI otherwise PAI will not trigger.  LIST BOX in SELECTION SCREEN
        List Box is created in selection screen using PARAMETERS statement with
    AS LISTBOX addition other attributes like VISIBLE LENGTH (width of listbox) can be specified with the declaration. PARAMETERS name AS LISTBOX VISIBLE LENGTH n.
       The function module VRM_SET_VALUES is used to fill the value list associated with a List Box .This FM uses types which are declared in type group VRM. So we should declare TYPE-POOLS VRM before using this FM.
    Some important types declared in the VRM type group are
    VRM_ID
       It refers to the name of the input/output field associated with list box
    VRM_VALUES
      It refers to the internal table consisting of two fields TEXT(80C) and KEY(40)C
    that will be used to create the list values.
    CALL FUNCTION  'VRM_SET_VALUES'
      EXPORTING
          ID                  = name of screen element, it is of TYPE VRM_ID
          VALUES      = internal table containing values, of TYPE VRM_VALUES
    Thanks
    Ashu Singh

  • HT5527 Hello, I had 25Go transfered from MobileMe, skimmed down to 5Go now. I cleaned my emails. From mail, on my mac, 'get account information' shows less than 1 Go... From System preferences/iCloud, up to yesterday it showed 12Go... I don't understand!

    Hello, I had 25Go transfered from MobileMe, skimmed down to 5Go now. I cleaned my emails. From mail, on my mac, 'get account information' shows less than 1 Go... From System preferences/iCloud, up to yesterday it showed 12Go...
    I don't understand!
    These information are contradctory. Now my account is locked.
    What Am I supposed to do???
    thanks for your help!

    Well as far as I can tell the only developed alternative to Apple is Microsoft, sure you want to go there?
    iCloud (and Mobile Me before it) are consumer level systems, working correctly they are a poor choice for business use, if you want to stay all Mac try Zimbra if you can let a little Microsoft in the mix use Microsoft Exchange (Mail, iCal & Address Book are compatible as clients), hosted Exchange systems cost about $10 per month.
    Or try to fix what is wrong with your installation (which is clearly not running as it should)

  • Can I install 8.5.1 modules on a LABVIEW 8.5 system

    Can I install 8.5.1 modules especially ARM module on a LABVIEW 8.5 system ...
    Since 8.5.1 is just a minor upgrade to 8.5 I guess it should do ..
    But does it work effectively while importing code to  ARM processor

    Hi Bharath,
    No, it's not a good ideal to install an 8.5.1 module on LabVIEW 8.5.  It may function, but chances are that it won't.  The versions should match exactly.
    You will want to upgrade your LabVIEW to 8.5.1 before installed the LabVIEW Embedded Module for ARM Microcontrollers.  (Of course, you are welcome to try, but I suspect that you will get an installation error.)
    Kevin S.
    Applications Engineer
    National Instruments

  • I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

    I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

    OK, lets do a complete overhaul to make sure it's working ok.
    First to check your Windows system file for any corruption:
    Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
    type in
    sfc /scannow
    let Windows fix any system files that need to be repaired.
    Restart the computer.
    Start iTunes and see if it is ok.
    If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    (Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Maybe you are looking for