Showing apple logo then going black and showing apple logo again

i have an ipod touch 5th generation and i was trying to restart it but now it keeps showing the apple logo and then going black, then showing the apple logo again. i try to sync it on itunes and itunes keeps freezing

Try:                           
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • Help! Light gray magnified apple logo then goes black and dies.

    Hi,
    Whenever I start up my macbook pro a lighter than usual gray screen pops up with a magnified apple logo and spinning wheel, it then proceeds to go to a black screen and stays there. I tried starting it up in single user mode and running fsck but that didn't do anything it failed to notice that there was a problem. I then tried running disk aide from my start up disk but it failed to find anything wrong with my computer. I replaced my hard drive with a new one and retried all of those things and still the gray screen would appear. I also ran disk utility and and verified and repaired disk permissions and nothing worked. In addition to that i tried resetting my ram. I have no clue how to fix this I've searched all over the web but can't find anything. I desperately need my computer for school.
    Thanks
    Dave

    WELCOME!http://i29.tinypic.com/2ef7yfn.gif!
    See Article: http://support.apple.com/kb/TS2377 MacBook Pro: Distorted video or no video issues

  • I just replaced my ipod touch 4th generation screen and I went to go turn it on and it flashes the apple symbol then goes black and does the same thing over and over.

    I do not knw why it does this?

    Oh ur in the boot loop! You have to restore I believe. Was ur device jailbroken? Because you would have to completely reset it.

  • Computer boots with Apple logo then goes black

    So my MacBook Pro boots up withe the Apple logo then goes black as if the it is set on the lowest dim setting, you can just barely make out the icons on the screen so it is booting into the log on screen. I tried brightness, I tried holding down shift, you get a flash of blue then goes black. I tried the startup disk it starts up and goes black, you can just make out the outline of the language selection on the startup disk.
    Any suggestions.

    1. Try doing a Parameter RAM reset - hold down apple/option/p/r keys at start up and wait for three chimes before releasing the keys.
    2. Boot holding down Apple/S and don't let go until you see scrolling text.
    When that stops and you see a root#: prompt enter
    fsck -fy
    Let it run through all the checks and repairs.
    If it fails first time, at any time, or finds and fixes a fault - run the command again and keep doing so (some fixes can take several passes) until it says "Appears to be OK" then enter
    reboot

  • Refurbished iPod touch 3rd gen won't start.  Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help,

    Refurbished iPod touch 3rd gen won't start.  Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help!

    I have tried holding the power home button but all that does is turn it off. When I try to start it again it goes into the same loop.

  • Hp w2338h monitor stays on for about a sec then goes black and will not come back on

    When I turn my computor on the monitor will only stay on for about a sec and then goes black. I can turn monitor off and on and it does the same thing. A new motherboard and been installed and computer works well with other monitors. Was using upgraded video card which has been removed and using orginal video card that came with computer. The monitor started acting up and before new board installed and would come on when monitor was turned off and then on. Now it just stays black after being rebooted or turned on. Can anyone help or have any ideas what could be the problem?

    Hi charlezr,
    I see that your monitor goes blank after you start up the computer, and I would be happy to assist you! To begin, I will need to ask you a few questions:
    What is the Product and Model Number of your desktop computer and monitor?
    What version of Windows do you have installed on your computer?
    Is this an on-going, or recent issue?
    In the meantime, I recommend following this document on when the Monitor or TV is Blank after Starting the Computer. This should help you determine if the blank screen is being caused by the computer hardware, the video signal to the monitor, or the monitor itself.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • How can I fix my iPod that the screen shows the apple logo then goes black then back and will NOT connect to iTunes?

    I turned off my iPod then turned it back on. The normal apple logo appeared on the screen but then it went black and it won't connect to my iTunes. What should I do and what are my opptions.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When I shut the lid to my computer and then open it again the screen comes on and then goes black and I have to press random keys to make it show again.  Does anyone know why this is happening?

    When I close my lid to make the computer sleep and I open it back up again when I am ready to use it the screen turns on and then turns black.  I have to press random keys to make the screen show again.  Any help is greatly appreciated!

    First, before you sleep your MBP, make sure you either scroll down the Apple menu to sleep your machine, or do it even more easily by pressing CMD-OPTION - DiskDrive (upper right hand corner of your keyboard). I wouldn't just close your machine to let it sleep.
    It's hard to know exactly what's happening, but here are a few pointers.
    1. Go to System Preferences/Energy Saver and make sure you've set a sleep time of more than two or three minutes. Your machine may be trying to sleep too early. In the same preferences, set Computer Sleep to more than ten minutes, to make sure you don't get an unintentional sleep.
    2. Take a look for third-party applications you might have installed.
    Post here with your results!

  • My ipod shows a red battery, goes black and then sticks on to a white screen

    My daughters ipod touch 4th generation shows a red battery when plugged in...then turns black for a couple seconds to then turn to a blank white screen.  what can I do to get this hook up to itunes so that I can fix it?

    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar
    and/or
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When I boot up my iPhone 4S it shows the Apple icon then goes black for over 30 seconds.

    Why does my iPhone 4S, when I turn it on in the morning and it shows the Apple icon, turns complete black for over 30 seconds before I can swipe and log in? This started happening when I upgraded to iOS8

    Hi Haleynichole_99!
    I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • My imac starts with a white screen, then goes black and a small white line just blinks in the top left corner of the screen?

    My imac starts with a white screen, then goes to black with a small white line blinking in the top left corner of the screen. Any ideas? Thanks.

    Try starting your iMac with the original DVD that came with the machine then launch disk utility to repair your hard drive. 

  • My iPad mini has recently begun to restart itself at random intervals, like on the lock screen or while in YouTube. Before it reboots itself a few faded lines jut across he screen, then it goes black, and the apple logo appears, and it resets. Help?

    It is severely frustrating

    Hello, Crazyrz1. 
    Thank you for visiting Apple Support Communities.
    Here are some helpful troubleshooting steps to go through when experiencing this issue.  These steps are labeled for the iPhone, but they will apply to your iPad as well.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    If the issue persists, see the section labeled Issue not resolved.
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    Jason H.

  • PowerMac wont start up - Gets to Apple screen then goes black

    Recently my 2.5Ghz DP PowerMac G5 has been behaving badly and now it appears to have died!
    On startup it gets to the grey background with the Apple then nothing. No spinning gear and no Hard Drive activity from the Mac. After switching off and trying again not even the Apple screen comes up I just get a black screen. If I leave it a while then try again I get the Apple screen again but nothing else.
    Tried starting up in 'Safe Mode' with shift pressed but using wireless keyboard and mouse wasn't sure if keyboard is recognised until Mac has fully booted. Tried switching to conventinal wired keyboard and mouse but still nothing - it's as if the keyboard isn't being found as the light on the Caps lock doesn't work while attemping a boot up. Does it matter where the keyboard is plugged in? Mac or monitor?
    I can only think to take it in to Apple for repair but if anyone has any suggestions or ideas I would be very grateful!

    Hi-
    The 2.5GHz machine is liquid cooled.
    Open up the tower, and look for signs of leakage:
    http://www.fusina.net/G5coolantleaks/gallery.php
    http://www.fusina.net/G5coolantleaks/index.php?lg=uk
    http://www.youtube.com/watch?v=ZDyIIFyUpGI
    http://www.xlr8yourmac.com/systems/G5coolantleaks.html
    http://www.macintouch.com/readerreports/powermacg5/topic4243.html
    http://www.macsimumnews.com/index.php/archive/macosgliquidcooled_power_mac_g5sleaking

  • App shuts down, screen goes black and an apple appears

    What does this mean?

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT1688 My iphone 5 screen is flickering then going black and becoming unresponsive.

    I just bought this phone, it is up to date on software AND it has had a waterproof lifeproof case on it since day one. When the battery is low the screen flickers uncontrollably and fades to black or white, there are a bunch of sideways lines on it. This phone has NOT been dropped or gotten wet.

    Was this phone ever jalbroken?
    If restoring as new, without using a backup, didn't help, there is certainly a hardware problem that only replacement can fix.  Your warranty is void unless you return to the USA.  Short of that, finding a local independent iPhone repair center would be your only option

Maybe you are looking for

  • ITunes 10 wont install

    Hi, itunes 10 won't install. It keeps giving me the error that "can't delete ipod service". I cancelled out and tried installing from from Tools>download only . No luck. I had this problem in going from 8 to 9 and I had to delete everything according

  • ICR Process 003- Adding new field BVORG

    Hi, I am hoping Ralph will see this post and grant some of his wisdom.  I have searched this forum as well as OSS and can't seem to find a good answer to my issue. I am in the process of implementing the ICR Process 003 in our development system.  I

  • Incorrect use of the TOP clause

    Hi I need to demonstrate the use of the TOP clause, however when I run my SQL it says incorrect use of the clause. Question: List the top 3 earners in the company( from the employees table). List employee_id, last_name, and the salary in descending o

  • Time capsule set up and bootcamp

    Dear All, I am having problem with my time capsule setting up. I have followed all the instructions, and have hopefully installed it correctly. The green light is on. Last thing to do is to turn it "on" by slidding the bar to on. Unfortunately, at th

  • CR2 - DNG conversion, what is not included, e.g. focal points

    I use the DNG Converter to convert my Canon CR2s (Canon 60D), both for archival reasons and to save space as the DNGs are on average 5Mb smaller each, which adds up. I am aware that some proprietary things are not included in the DNG, notably the foc