Showing as an unsecured site

A co worker gave me his old wireless router, following the instructions several times, it still is showing as an unsecured site, what have I done wrong, please note I am not technoloy knowledgeable.

The wireless settings might be not proper...so go through the instruction below for you router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

It's only Safari/iOS7. Chrome iOS7 works fine.
Solution?
Go to YT and grab the code.
Paste it in a HTML Snippet.

How to not show pages in the Site Map

This is probably the easiest question of them all... but...
How do you not show pages in the site map?
It seems that by default, all pages are added to the sitemap.
Is it a case of unchecking "enabled" and checking "exclude from search results" under "More Options" on the page itself?
Or another way?

Hi David,
The "exclude from search result" will remove from the sitemap.xml "yoursite.com/sitemap.xml" and from major search engines from being picked up. If you tick this option please allow for a few hours to have the xml to reflect the changes.
"If you select this option then this web page will be excluded from the site search feature built into this system as well as from the sitemap.xml file submitted to the major search engines such as Google, Yahoo and Live."
The sitemap module found under site settings is not related to the xml file so you'll need to manually remove and insert onto your page if using this feature.
- http://kb.worldsecuresystems.com/kb/add-sitemap.html
Hope this clarifies.
-Sidney

How to show rss from other sites on my site?

how to show rss from other sites on my site?
i'd like to have a window on my site that shows rss from
another site
(their content in a window on my site)
thanks
lenny

What version of DW do you have. The later versions have RSS
script generators (I believe) for consuming feeds. Otherwise, you
can use 3rd party sites to generate the code, or you can use a
server side scripting language to consume the feeds.

When you expand to show local and remote sites, in DW CS6 how do I get the local to be on the left?

When you expand to show local and remote sites, in the previous verions of DW, the files type (local or remote) selected when not seeing both, automatically came up on the left. I liked local when I am editing and when I am ready to upload I expand to see both local in remote. Before, the one you had selected, in my case local, was always displayed on the left. Now in CS6 when I have local selected before I expand, the local is on the right and remote on the left. For me that is not correct. I find that having local on the left works best for me like reading, left to right, I want the local on the LEFT so I can put the updated from left to the remote on the right.
-->In DW CS6 how do I get the local to be on the left?

Thank you so much! That did it!

When I type in "www" in the navagation space I get a drop down that shows all the web sites I have visited! How do I turn this off?

# Question
When I type in "www" in the navagation space of the home page I get a drop down that shows all the web sites I have visited! How do I turn this off? edit

That drop-down shows matches from your History and/or Bookmarks. To change what is shown, see "Controlling Behavior" in this article:
*https://support.mozilla.com/en-US/kb/Location%20bar%20autocomplete
 
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
**New Adobe Reader X (version 10) with Protected Mode just released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
#*Also see "Manual Update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Firefox mobile shows full version of sites instead of mobile versions of sites only.

When I visit sites on firefox mobile ( i have the experimental version for phones like the HTC Hero that use the SENSE version of Android)
Firefox mobile will show the whole main site instead of mobile versions. if a Site has a mobile version, Id prefer it to show that version.
Also when i go to put information into a form on the page, for example a log in, it makes the screen REDICULOUSLY large and a grey bar with an arrow goes right across the middle of the screen. On the native android browser i can enlarge the form just big enough to see type in my details and then hit enter. On firefox its somewhat of a nightmare trying to log into anything.

You can ask your favorite sites to add mobile Firefox (Fennec) to the list of mobile browsers they detect. Until they do, you can use the add-on "Phony" to make the sites think you are using a different mobile browser: https://addons.mozilla.org/en-US/mobile/addon/162014/

PHP Template CSS not showing up in html site

I'm making a website for a school assignment, but after making my template, and attempting to make a site out of it, the CSS for my drop down menu didn't apply.
I can see that it's there (Saying DDMenu.css in the css bar) but it's just one line, with no possible extentions or anything beneath.
< template < "index" site
any tips?

1. Have you defined a site in DW?
2. Are you working within this defined site?
3. Is the link in the template to the CSS file correct FROM THE TEMPLATE FILE?
4. Why are you using APdivs (the worst possible way to build a page)?
The image you are showing for the index site means that the link to the CSS file in that page is incorrect (i.e., the link is there but the path is wrong).

Can I get something to stop showing up in "Top Sites"?

There's a web page that keeps showing up in "Top Sites" when I open a new tab that I would rather now have showing. Is there a way to get rid of it?

HI,
How to Edit TopSites
Carolyn

How can I make a new tab for FF 5.0 show my most visited sites like my prior version did?

Since I installed FireFox 5.0 recently, when I open a new tab, it is just blank. My prior version of FireFox showed about 9 or so of the sites I visited most often. I never set this in the old version. It just worked that way. I loved it. I have no idea how to make it happen in FireFox 5.0. I am even considering re-installing the old version because of this. I hope you cn tell m how to make this work.

There are a number of different "speed dial" or "fast dial" add-ons to do this. To see which one you had before, check your disabled add-ons. There could be an updated version.
orange Firefox button ''or'' Tools menu > Add-ons
On the left side, click Extensions, then scroll down to the grayed out ones. Can you spot it?

How can I add a column to show the website (web site) of an rss feed?

I've got a lot of rss feeds coming into thunderbird. I organized some into folders, but also have a folder for several rss feeds as they adress the same topics and I prefer not to browse through 25 separate folders. However, the sender doesn't always make it clear which blog it's from, so I'd like to add a column which shows the website of the rss feed. (sender is often: [email protected], and there are different writers for a single blog who themselve have their own blog as well, so can't sort on sender name either).
When opening an rss feed, it displays in the header: web site (with the space) and then the web adress. This is what I'd like to be able to see in my columns.
I didn't see an option yet to customize columns, nor did I find an addon that does this.
Does anyone know a solution?

Thanks, that seems to work. I'm struggling to place the lightbox at the top of the page however - when I click the trigger I want the menu image to display anchored to the top of the page, but there's always a gap as it centers the image. Help is appreciated!

Hyper-V VM not showing up in Azure Site Recovery

Hello,
I'm trying to set up Azure Site Recovery as "On-Premise Hyper-V site to Azure" - so without VMM.
So far I've followed the steps from here: https://msdn.microsoft.com/en-us/library/azure/dn879142.aspx up
to Step 5. That's where I'm stuck.
Wen trying to set up protection for my VMs Azure is not recognizing my on premise VMs although there is one running on my Hypervisor: http://i.imgur.com/h8TnV46.png
The Hypervisor got recognized within the Hyper-V site and the Recovery Services Agent and Site Recovery Service are running on my Hypervisor.
The Hypervisor's event log (Microsoft -> Azure Site Recovery -> Provider -> Operational) shows that replication is triggered every 15 minutes as configured in Azure but no changes are commited to Azure.
My Hypervisor is a freshly installed Windows 2012 R2. Not domain joined, no proxies. Firewall disabled.

Hi,
Check for FAQ on Azure site recovery for Hyper-V and other VM's
http://social.technet.microsoft.com/wiki/contents/articles/21619.microsoft-azure-site-recovery-common-error-scenarios-and-resolutions.aspx
Girish Prajwal

Photos not showing up when iweb site published

Once the website has been updated to iweb 08 the photos on pages do not show up.
Has anyone found a solution to this?

I am having the same problem and I built my site from iWeb 2.02 from the start. The curious thing is that the pictures show up on my G4 but not on my old G3 which runs OS X 10.3.9. Most of my friends are getting the pictures too. Could it be a computer problem instead of an iWeb publishing problem!?!

Some of the users Profile photo is not showing in sharepoint team sites

Some of the users Profile photo is not showing in the list of SharePoint team site.
In the people picker their picture is grayed out but if you click on their name it will direct you to their mysite and the picture is there.
Can some body help on this.

Try running:
stsadm -o sync -deleteolddatabases 0
Then, run the timer job named similar to "User Profile Service Application - User Profile to SharePoint Full Synchronization". Wait for it to complete, then re-check the profile photo on the SharePoint site.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

New Domain Controller does not show in our different site's Domain controller's Sites and Services

Hi,
we have two sites in our AD environment. OMA site and NY site. we have three domain controllers in our OMA site and two domain controllers in our NY site. All our DCs are windows server 2008R2 except one in our OMA site that is 2003R2 the domain
functional level is also 2003R2.
We decided to raise our functional level to 2008R2. I added a new domain controller in our OMA site and transferred all FESMOS from the DC that was running 2003R2 to this new domain controller.
the issue now is that our NY site does not make any connection with the new domain controller in OMA site. it does not even show it under sites and services. I have checked the DNS settings and everything. if you try to replicate the connections
from NY site it gives the following error: "The naming context is in the process of being removed or is not replicated from the specific server."
can anyone plz tell me why this is happening mt brain is just frozen at this moment and cant figure out why is this happening

Just noticed this replication issue has been going on for a while now but we never noticed until I added new DC. here is the error log for the NY site DC.
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 1/4/2014 8:11:40 AM
Event ID: 2042
Task Category: Replication
Level: Error
Keywords: Classic
User: ANONYMOUS LOGON
Computer: NORDC1.vertrue.com
Description:
It has been too long since this machine last replicated with the named source machine. The time between replications with this source has exceeded the tombstone lifetime. Replication has been stopped with this source.
The reason that replication is not allowed to continue is that the two DCs may contain lingering objects. Objects that have been deleted and garbage collected from an Active Directory Domain Services partition but still exist in the writable partitions
of other DCs in the same domain, or read-only partitions of global catalog servers in other domains in the forest are known as "lingering objects". If the local destination DC was allowed to replicate with the source DC, these potential lingering object
would be recreated in the local Active Directory Domain Services database.
Time of last successful replication:
2013-05-16 15:26:38
Invocation ID of source directory server:
9236ac56-d046-4632-b072-acbe823c5f6c
Name of source directory server:
accde843-11b2-476c-9783-9b29252d0ba5._msdcs.vertrue.com
Tombstone lifetime (days):
90
The replication operation has failed.
User Action:
The action plan to recover from this error can be found at
http://support.microsoft.com/?id=314282.
If both the source and destination DCs are Windows Server 2003 DCs, then install the support tools included on the installation CD. To see which objects would be deleted without actually performing the deletion run "repadmin /removelingeringobjects
<Source DC> <Destination DC DSA GUID> <NC> /ADVISORY_MODE". The eventlogs on the source DC will enumerate all lingering objects. To remove lingering objects from a source domain controller run "repadmin /removelingeringobjects <Source
DC> <Destination DC DSA GUID> <NC>".
If either source or destination DC is a Windows 2000 Server DC, then more information on how to remove lingering objects on the source DC can be found at
http://support.microsoft.com/?id=314282 or from your Microsoft support personnel.
If you need Active Directory Domain Services replication to function immediately at all costs and don't have time to remove lingering objects, enable replication by setting the following registry key to a non-zero value:
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Allow Replication With Divergent and Corrupt Partner
Replication errors between DCs sharing a common partition can prevent user and compter acounts, trust relationships, their passwords, security groups, security group memberships and other Active Directory Domain Services configuration data to vary between
DCs, affecting the ability to log on, find objects of interest and perform other critical operations. These inconsistencies are resolved once replication errors are resolved. DCs that fail to inbound replicate deleted objects within tombstone lifetime
number of days will remain inconsistent until lingering objects are manually removed by an administrator from each local DC. Additionally, replication may continue to be blocked after this registry key is set, depending on whether lingering objects are
located immediately.
Alternate User Action:
Force demote or reinstall the DC(s) that were disconnected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS Replication" />
 <EventID Qualifiers="49152">2042</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>5</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8080000000000000</Keywords>
 <TimeCreated SystemTime="2014-01-04T13:11:40.963263500Z" />
 <EventRecordID>38018</EventRecordID>
 <Correlation />
 <Execution ProcessID="660" ThreadID="1596" />
 <Channel>Directory Service</Channel>
 <Computer>NORDC1.vertrue.com</Computer>
 <Security UserID="S-1-5-7" />
</System>
<EventData>
 <Data>2013-05-16 15:26:38</Data>
 <Data>9236ac56-d046-4632-b072-acbe823c5f6c</Data>
 <Data>accde843-11b2-476c-9783-9b29252d0ba5._msdcs.vertrue.com</Data>
 <Data>90</Data>
 <Data>Allow Replication With Divergent and Corrupt Partner</Data>
 <Data>System\CurrentControlSet\Services\NTDS\Parameters</Data>
</EventData>
</Event>

Showing as an unsecured site

Similar Messages

Maybe you are looking for