Showing Calendar for Current Month

Dear Forum,
I intend to display calendar in corner region of my home page for current month, and also want to highlight dates in calendar based on certain parameter or query output.
How should i accomplish this in HTMLDB?
Regards,
Manpreet Johal

Sir,
Please answer to this problem asap.
Regards,
Manpreet Johal

Similar Messages

Calendar does not show events for current month unless I switch away and back

I have had this issue on my iPad 1st gen (with OS 5.1, also happened on previous OS version) where when I open my calendar in month view, the entire month will be blank (have no events showing). I have to swipe to a different month and then back to the first month, and then it will show all of my events for the month. This is a pretty annoying bug. Are there any fixes for this?
edit: I see this has also been reported at https://discussions.apple.com/message/17750848

Happening to me, too. Started with 5.0 and continues on 5.1. I referenced your thread in the one that you listed, just to keep them linked up and build up a list of affected users.

Sales report for current month and year a go month

i could you please guide me builting report for current monthwise for current month and year a ago month
report parameter month_year='06-2010'
tables = sales and below are the table fields
customer_id
invoice_dt
invoice_am
thanks
nhm

Okay, Still you did not mention how you will pass value in report while generating.
Anyway the query with UNION ALL will work. For Example.
I am assuming that the parameter for date/month you will pass in range like 01-JUN-2010 to 30-JUN-2010
SELECT customer_id, SUM(curr_value) curr_value, SUM(past_value) past_value
FROM
SELECT customer_id, NVL(SUM(invoice_amount),0) curr_value, 0 past_value
FROM sales
WHERE invoice_dt BETWEEN :P_FROM_DATE AND :P_TO_DATE -- here P_FROM_DATE and P_TO_DATE will be the date range for current year as i showed above.
AND -- Any Condition goes here...
GROUP BY customer_id
UNION ALL
SELECT customer_id, 0, NVL(SUM(invoice_amount),0)
FROM sales
WHERE invoice_dt BETWEEN ADD_MONTHS(:P_FROM_DATE,-12) AND ADD_MONTHS(:P_TO_DATE,-12) -- This add_months function for the previous year same month.
AND -- Any condition goes here...
GROUP BY customer_id
GROUP BY customer_idNow using the above query you can design the tabular report as you showed the format.
-Ammad
Edited by: Ammad Ahmed on Jul 3, 2010 7:55 PM
added GROUP BY

Parameter for Current Month and Previous Month

I'm trying to create a parameter for current month and previous month based on the ex_date, but not sure what i'm doing wrong.
where ex_date = @SelectDate
I created a second dataset below for the values in the parameters.
SELECT Month(CURRENT_TIMESTAMP) AS 'Month', 'Current Month' as 'Current Month'
union all
SELECT Month(CURRENT_TIMESTAMP)-1 AS Month, 'Previous Month' as 'Previous Month'
Results
Month Current Month
3 Current Month
2 Previous Month
Once I preview it I get "Conversion failed when converting date and/ or time from character string" I changed the data type to "date/Time" but that did not make a difference. The date is convert (varchar(10), ex_date, 101) so looks like
11/12/2014.
I've also tried expressions like =month(now()) to pull current month with same error so i'm not sure what i'm doing wrong. Any ideas?

i tired this real simple report
in the first dataset - my main report query - select name from sysdatabases where month(crdate())=@month
in the second dataset - select month(getdate()) as Month1
in the parameters - choose int data type and available values - select the second data set
in the first data set- add this parameter..( i am assumming you know this, since you have done)
in the preview you should get the drop down with current month number - 3
and if you run the report, it will display the database names that were created in march. remember we are no checking year, so will get all that were created in march across the years.
Hope it Helps!!
I'm looking to have the dropdown say "Previous Month" and "Current Month" as a option. I know how to get the information in SQL, but not sure how this translates or put into a parameter.
Current Month
list_date BETWEEN
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
AND
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()) + 1, 0)
Previous Month
list_date between
CONVERT(varchar,dateadd(d,-(day(dateadd(m,-1,getdate()-2))),dateadd(m,-1,getdate()-1)),106) /* Last Month */
and
CONVERT(varchar,dateadd(d,-(day(getdate())),getdate()),106)

Report for getting an oppotunity for current month

Please tell what can be a filter or function for getting an oppotunity for current month , i have the field as "Opportunity created date" so what function or SQL expression can b eused to get created date = current month's date

Thanks..i'll do taht
Edited by: user1074008 on Sep 28, 2010 3:11 AM

Can i add data for current month only

can I add data for current month only?

Knowing your plan options is important marlingut! So that we are able to provide correct information, what make and model phone are you trying to add data too? Is this device already activated on your account?
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

SapExit for Current month

Hi,
We have a scenario where we run the query monthly, expectation is the query should automatically default to using the current month. So do we have any sap exit for current month.
Regards,
Ravi

Hello Please refer the following code
MTD / MTM(For current default Month)
Variable: ZP_X_09 For enetered month (on 0CALMONTH)
For current Month by default or for any given Month (For full month)
e.g. If current month/given month is 15.08.2009. It will give Aug-09.(200908)
WHEN 'ZP_X_09'.
    IF i_step = 1.
      w_fm_month = sy-datum.
      CLEAR l_s_range.
      l_s_range-low    = w_fm_month.
      l_s_range-sign   = 'I'.
      l_s_range-opt    = 'EQ'.
      APPEND l_s_range TO e_t_range.
      CLEAR : w_fm_month.
    ENDIF.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
        WHERE vnam = 'ZP_X_09'.
        CLEAR l_s_range.
        l_s_range-low    = loc_var_range-low.
        l_s_range-sign   = 'I'.
        l_s_range-opt    = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
      CLEAR : w_fm_month.
    ENDIF.
Regards,
Krunalkumar Rathod

Want to show data from current month & prev month in single record on forms?

Hello experts,
i have this requirement:
Table structure:
MOnth       Division         totalAmount
01-apr-2013      1               10000
01-May-2013    1               20000
01-apr-2013      2               30000
01-May-2013    2               50000
i want to display in forms like
Form:
Month : 01-May-2013
Month               Division               total               prev_Month          division               total                         dIFFERENCE
01-May-2013               1              10000                01-Apr-2013               1               20000                        10000
01-May-2013               2              30000                01-Apr-2013               2               50000                        20000
I am using two procedure for fetching records for current month and previous month.
but it will cause problem, if for some division previous month data not present.
please suggest me some query with which i can fetch current and pre month data in single record.
Please help me out.
Thanks
yash

I'M NOT SURE BUT TRY IT ............
select x.mn mnth, x.division, x.totalAmount total, y.mn prev_month, y.division, y.totalAmount total, (y.totalAmount - nvl(y.totalAmount,0)) difference
from
(select month mn, division, totalAmount
from table_name
where month = (select max(month)
from table_name
) x,
(select month mn, division, totalAmount
from table_name
where month = (select add_months(max(month),-1)
from table_name
) y
where x.division = y.division(+)
MOSTAFIZ MITUL
DHAKA BANGLADESH

Calendar only showing entries for two months in the past on my iphone.

Calendar only showing entries for last two months on my iphone. How do I get full history of calendar?

Brian,
Go to Settings>Mail, Contacts, Calendars>Calendars>Sync>"All Events"

Mobile Email not retrieving messages for current month

I did a couple of quick searches on this problem, but I couldn't find any information if this is a known bug with the Mobile Email application. For the last week or so, whenever I access Mobile Email on my LG enV Touch, the first page of emails shown are for the previous month, but the same day of the month (so today is August 16th, 2010, and the newest messages I can access are from July 16, 2010). There is no software update available. From the application's info page it seems like my version is 3.1.3.2.
Also, the email address that is being accessed is for an @comcast.net account, but this setup has been working fine for over a year now, until this issue came up. When I access this account elsewhere, it does show messages for the current day, like normal.
Has anybody seen a problem like this? Any suggestions for next step on looking into this?
Thank you.
- Wes

I do apologize that you are not able to retrieve any of the current months emails.from your device.However you may need to re download the mobile email application in order to get the emails to start coming through. Here are some steps to downloading the mobile email application from your device. Hope this helps!
From the main screen, select Menu.
Select Media Center (Get It Now).
Select Browse & Download (Tools on the Go).
Select Get New Applications.
Select Mobile Email.
Select the purchase option.
If prompted, select Yes to start the download.
Select Yes.
To continue the installation, review the Terms of Use, then select Accept.
Select the desired email provider, then choose Select.
If prompted, review the Terms of Use for the email provider, then select Accept.
Enter the username and password, then select Sign In.
Username and password are case sensitive

Get data for current month in VC from query - Urgent

Hi all,
I have designed a query for cube FIAR_C03 for overdue items and query output contains customer, net due date, document date, fiscal year period and amount. I want a chart for that query in VC that only contains those items in which net due date is in current month. How can i do that?
Where I can place the condition to display only those items in vc in which net due date is in current month and how ?
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi Aisha,
It is possible to do with following steps:
1. In Query Design make your field 'Net Due' filter with variable for date input (0CALMONTH for example where your date should be this format MMYYYY). Test your query and see if you input a month/year date it would would work;
2. Build one table from output of your query (choose fields);
3. In Visual Composer, drag your query into your board and from 'Varaiables' port (NOT FROM INPUT) drag a line to create a Start point. As soon you realease to create 'Start' a box will ask which fields you want. Choose your date as field;
4. Select the line between Start point a query. In Input Field assigned the following formula (DSTR(NOW(),'MMYYYY') *
5. Deploy your model
at this formula I said: transform NOW(), current date, in Text with format MMYYYY (012002 for example).
It works!
Assigned points if was helpful.
Kind Regards,
Gilson Teixeira

I seem to have lost the appointments in my Ipad2 calendar for the months of July, August and September. I need to refer back to them, and there are only a few appointments reflected. What can I do to recover this info?

My Ipad2 has recently lost the appointments on my calendar for the past 3 months. I need that content to refer back to. Wheredid it go and can I get it back?

Are they still on your pc's calendar? If so, connect the ipad, go to 'info' scroll down to the calendar and change the setting of 'do not sync items older than....' as far back as you need it

Load data only for current month using ABAP Routine

Hi Everyone,
I am loading data from R/3 using the 0HR_PA_OS_1 extractor. This requirement is to load the position numbers from R/3. Using the extractor for a given position 28 I get the following dataset results.
CALMONTH POSITION
11-2004           28
12-2004           28
01-2005           28
02-2005           28
      |
07-2007          28     CURRENT DATE
Now when I pull data in BW I only want to load the record for most current i.e. 07-2007. I DO NOT want that ALL the records since the day the position was created should be loaded.
Now I do understand this can be achieved using a ABAP routine in the INFOPACKAGE. Below is the routine that I am using and what it is doing is that it is only bringing in the first record.
data: l_idx like sy-tabix.
clear: l_idx.
read table l_t_range with key
       fieldname = 'CALMONTH'.
l_idx = sy-tabix.
Current month only
l_t_range-low = sy-datum(6).      "Current month
l_t_range-high.
l_t_range-option = 'EQ'.                           "equals
l_t_range-sign = 'I'.
modify l_t_range index l_idx.
p_subrc = 0.
Can anyone suggest a solution as to why this is happening?
Thanks,
Rahul

One explanation would be
- If there is no CALMONTH selection values specified in the selection tab, l_t_range would be empty. This would mean there would be no line for CALMONTH selection, and the code won't modify the l_t_range.
If this is true, you need to check sy-subrc after reading from the itab.
data: l_idx like sy-tabix.
clear: l_idx.
read table l_t_range with key fieldname = 'CALMONTH'.
if sy-subrc = 0.
l_idx = sy-tabix.
* Current month only
l_t_range-low = sy-datum(6). "Current month
* l_t_range-high.
l_t_range-option = 'EQ'. "equals
* l_t_range-sign = 'I'.
modify l_t_range index l_idx.
else.
move 'CALMONTH' to l_t_range-fieldname.
l_t_range-low = sy-datum(6).
l_t_range-sign = 'I'.
l_t_range-option = 'EQ'.
append l_t_range.
endif.
p_subrc = 0.

Customer exit in APO for current month in query

Hi,
I need to create a customer exit which automatically restricts 0calmonth on the current month in a query.
How should I do this APO?
Most important, Which table should I use to find the input, i.e current month and year?
If possible please provide some code to show the solution.
Best regards,
Sebastian

Use the standard SAP exit 0I_CLMTH.

Delete cost run & reset release for current month

For our client we have created a new plant while testing this plant user created a material and they have done a cost run in ck11n with costing varient zv01 but in they released the cost with costing varient ppc1 with this system got inconsistency and not not allowing to release cost for any other material in the current month if we try to mark it for next month it is working fine.
we deleted the cost run through ck44 & ckr1 then also we are faceing the same problem. Kindly give me the solution how can i reset the release and later i want to run the ck11n & ck24 for material in the current month to do the production cycle. please consider this is as a urgent.
Regards
Chakravarthy

Hi
Whether you should do MR21 or not ??
a. If the cost estimate you reversed belongs to Last month and you are going to post the GR in last month then you should do MR21
b. if the cost estimate you reversed belongs to may and GR will also be posted in May - No need for Mr21... Because, even though you release cost on say, may 2nd, the cost always gets released from the Start of the Month
br, Ajay M

Showing Calendar for Current Month

Similar Messages

Maybe you are looking for