Showing Correct Sample Wave Form

Greetings,
I am a very new Logic Express user. Although I've only used it for a short period of time. I decided to try it out on a few projects my studio is currently working with. One of the features that I liked was the multiple take feature. I found this to be very handy. One problem that I can't figure out. If I perform 3 or 4 takes, the Sample Editor only shows the first take and I can't figure out how to get the editor to show the correct one! My wave form is correct on the upper screen but not the lower editor screen??? What am I doing wrong?

Hi Bryan,
There are probably other ways to do this but here's one way. First look at the region in question and determine the take number. This is usually written on the audio region with the track name followed by a "." and a number. Then open media/bin and find the take with that number. Each take will have a horizontal line beside it with a small blue area somewhere along the line. Click on the blue area beside the correct take and this will open the sample editor window loaded with the correct take.

Similar Messages

Wave forms in nested sequence?

Hello,
is there a way to show the audio wave form in a nested sequence?
Thx,
Max

I don't think so. Nesting just puts all the layers into an easy to manage packet.
You could try double clicking the Nest so that it will open on its own Timeline, then do an audio mixdown. That should work, at least in theory.

No wave form showing in regions

I recently have the problem that when I record my guitar signal thru my audio interface (tc near or Guitar Rig 3) the wave form of the recording doesn't show in the region.
When I open the sample editor I can see the waveform.
As soon as i change the level of the signal in the sample editor (make it higher OR lower) boom, the wave form shows in the region. Does anybody have a clue?

Thanx for the replay!
to set the recording delay to 0 did the trick, even though I have no idea how it ended up on a value of 677!!
I've set it previously to the proper value which I figured out learning from the fantastic videos by MacProVideo.com.
The proper procedure is shown in video Nr. 18 from "Logic's Latency toolbox".
You can find the particular video also on youtube: http://www.youtube.com/watch?v=gQUngLB5mWg
I can really recommend the Logic series from MacProVideo.com
melodea

Oracle Reports 10.1.2.3 output shows question marks, parameter form shows correct Arabic

Hi
Following is our environment
Oracle Application Server     10.1.2.3.0
Microsoft Windows 2003 Enterprise Edition Service Pack 2
Oracle Database 11.2.0.2.0
NLS_LANG     AMERICAN_AMERICA.AR8MSWIN1256
When client runs the report on browser (IE), the parameter form appears fine with Arabic characters.
Inserting the parameters in Arabic also look fine and characters display in Arabic but when report is generated, the output shows the inserted parameters as ????
On server, regional settings are ALL Arabic. Also the registry has NLS_LANG setting of AMERICAN_AMERICA.AR8MSWIN1256.
Report output is same for both html and pdf formats. For PDF subetting, uifont.ali file has been modified but the issue does not seem to be PDF related since the html format reports also shows ???
It is a 3 tier setup hence there is no question of having NLS_LANG registry settings for client PCs that are running Windows OS with Arabic regional settings that match the server.
Interestingly, the same report when run from a different application server having same architecture runs fine. The other application server has exact same version of OAS. Database supports Arabic and is configured as such.I tried comparing the different configuration files on both servers but apparently I cannot find the place where I should change something for the reports to show correct Arabic.
SELECT * FROM NLS_PARAMETERS
WHERE parameter IN ('NLS_CHARACTERSET','NLS_LANGUAGE');
NLS_LANGUAGE
AMERICAN
NLS_CHARACTERSET
AR8MSWIN1256
I am writing this after doing quite some research but seems like I am unable to find a solution to this.
Any help will be appreciated.

Thank you Paul for your reply.
I think you misunderstood me. I understand that it is all volunteer work and I never said I was looking for "quick" or "sure" response. I did not even use the words IMMEDIATE or URGENT in my post. I found it strange because I personally believe that there are many volunteers providing great support to others and yet my post somehow went unnoticed. In my personal opinion, however, if you do not wish to reply then you should just ignore rather than being rude. No one can force anyone to do the good work that people are doing here at oracle forums and they are all doing this out of choice. Let me also assure you that me and people like myself really appreciate their efforts.
Having said that, I wish you had taken time to read about my issue. There is infact a registry setting that specifies the NLS_LANG and it is already set under both Infrastructure and Middle Tier in the registry. I mentioned it earlier. The value is AMERICAN_AMERICA.AR8MSWIN1256 and I believe this is correct for Arabic characters.
What is confusing for me is the fact that if browser was not capable of showing Arabic characters then the static Arabic words in the reports layout (field name for instance) would also show as garbage or question marks. They appear to be fine. Since we are just passing some parameters in Arabic language and not saving anything in the database, the DB characterset does not come into play for now. Although the DB characterset is also set to store Arabic data. We are displaying the parameters that we are passing through the parameter form in the output of the report and this is where we see question marks (????).
Finally, if it was a browser issue or a DB characterset issue, then in my limited knowledge, I believe that the report that we are running using the other Application Server that is pointing to the same database should also show the same behaviour. That is not the case as it displays the same report perfectly. Client machine is the same in both cases using Windows 7 and IE as browser.
http://appserver1/reports/rwservlet?admin/myreport           (connecting to db1)    works fine
http://appserver2/reports/rwservlet?admin/myreport          (connecting to db1)     show question marks
Above URLs are examples. The point I am trying to make here is that the issue has to be with the new application server and it cannot be registry settings as I have double checked the entry and it exists in all Oracle Homes ie Infrastructure and Middle Tier. So maybe it is some configuration file setting that I am missing here.
Any help will be appreciated.

Sometimes JavaFX form (BorderPane) does not show correctly

We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
Additional information:
the form (BorderPane) is loaded during application start-up but it is not shown initially,
to show the form we remove previous contents from a StackPane and add the form instead,
to hide the form we do the reverse.
Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?

I am unaware of any such issue being reported previously.
Without a reproducible test case, you are unlikely to get much assistance.
Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
There were many bug fixes implemented for Java 8.
I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
If the issue still reproduces, create a bug report which includes your test case and full environment details.

Can I get the audio wave form to show in the Timeline?

Can I get the audio wave form to show in the Timeline?
Thanks / Christer

Yes Christer.
At the bottom left corner , under the audio timelines you will see a tiny black triangle.
Click it and from the contextual menu that appears select "Show Audio Waveforms".
Ian.

Audio wave form not showing up properly in Viewer (FCP 7 running Lion)

For some reason when I bring in my audio timeline into the Viewer to see the wave form it does not show up accurately. I used to be able to pull it up and fairly easily see each location we hit the clapper. Now the clapper spike does not show up until I zoom almost all the way in on the wave form. That's a TOTAL PAIN since you only see a few frames at a time. Not good when you've got a couple of hours of audio on that time line with 30 or 40 clapper locations to find. It's funny, it shows an actual flat spot until you ZOOM WAY IN on it, then you see the spike. This seemed to start happening shortly after installing Lion. I am not for sure that's what is happening, but has just never happened before.

Have you trashed your preferences?
If you use Preference Manager (free) from Digital Rebellion, you can save you current preferences before trashing so you can restore them if you wish.
http://www.digitalrebellion.com/prefman/
MtD

Can not see wave form in arrange window logic 9 Please help

I have been using Logic for 3 months now...mostly just importing old wave files from past protools sessions. Everything was working fine until I created a new session to record audio. I record the audio at a nice level...I hit playback...I can hear it fine but I can't see the wave forms. I can see it in the sample editor. I've searched around and found the same problem in the past on some forums......they say to trash preferences... I went to my mac drive...library...preferences and nothing I have no files labeled com.apple.logic.pro now I'm lost....the funny thing is... when I zoom in horizontal ...the wave form shows but it makes the track way too large. Any help would be great. Thanks

In Logic: Preferences/Audio
What is the "Recording Delay" parameter set to?
It should be zero, default is zero. If it's set to a positive or negative Logic will often not show the wavforms. If that's it, it's one of the long standing bugs in Logic.

I have generated two square wave forms using NI-9221. These two Square waveforms are suppose to be 90 degrees electrical from one another.

I have two square wave forms from an encoder wheel. I can not seem to generate or calculate the phase of the waveforms. I have tried to extract the data but it is not accurate? I can not use a true false statement with the extracted data either. I have to have the one waveform 90 degrees electrical from the other waveform. Any Suggestions?

Fist thank you both for responding so quickly. I am using a half encoder wheel and the waveforms are certainly show the phases correctly. The operator of this program will not have access to the graph only the data and measurements collected. The reason I am trying to get the phase is because that is going to be a major factor in if the board passes or fails. I extracted the phases from the waveforms but it’s not accurate at all. I think I may try to trigger when to measure the wave and when to stop measuring. Is that Possible?
J. Powell

OS X - Audio Wave Form Disappears

OS X 10.10.2
Premiere v. 2014.2
In every project I start I notice that the audio wave form that displays in the timeline, after Premiere conforms the audio, disappears depending on where I have the scroll bar in the timeline. This only happens when I create a multicam clip with two or more cams. I can also pin-point when it happens. If I scroll to the end of the timeline that I placed the clip in as soon as the end of the clip enters the current timeline field of view the wave forms will disappear. I took a video to show exactly what happens.
I understand that I am going to have to submit a bug report, but I want to know if 1) anyone else is experiencing this or can reproduce it and 2) if there is a way to fix it. Right now the only workaround for me is to Render and Replace the audio for every multicam clip I make. When I do that the wave forms seems to display correctly, but I would rather not have to do that every time I use a multicam clip.
I figure if others experience this and we all submit a bug report the odds of it getting fixed will increase.

I'm going to bump this. Is anyone else even experiencing this or able to reproduce it?

Date and time not showing correct whe imported to Power query

Hi,
I have an Excel list that I imported to another Excel file via Power query. A few of the imported columns contains date and time, for example 2013-11-09 20:19. When imported to Power query this will show as 41587.84652777778 and only dates/times with zero
hours and minutes will show correctly. When trying to change the data type to Date/Time it returns an error for all cells containing hours and minutes.
I use a Swedish version of Excel that uses a different time format compared to standard excel and also uses a , as a delimiter between date and time compared to the . used as delimiter in standard excel. Don't know if that can explain
this problem?
Brgds,
C

I updated Power query earlier this week, so it should be the latest version. When I created the sample file now the problem appears, so if it is a bug it has not been solved.
You find the sample file on the link below. 4 sheets with some info on the problem, the data, the query result and one sheet with the data and query result as pictures as it shows in my version of Excel, I guess it will look somewhat different when you open
the file due to local date/time settings.
Appreciate feedback on what you find!
//Caj
https://skydrive.live.com/redir?resid=94DF9214E3A6D4!107&authkey=!AEuAXX_kPC7yKaI&ithint=file%2c.xlsx

Added Styles to BC Module Stylesheet, Firebugg shows correct style but not affecting on display?

I have set up a style on the BC module style sheet (on bottom of sheet) for my blog, the issue is specifically for the blog body text. Trying to get the text to display in white. When I update the style sheet and view the site in firefox and then inspect the body of the blog, the style I made is showing correctly IN firebug but the text is still black. It is not changing color. Here's my style code:
.post-body {
    color: #fff;
    font-family: Arial,Helvetica Neue,Helvetica,sans-serif;
    font-size: 16px;
    line-height: 1.2;
    word-wrap: break-word;
    text-rendering: optimizelegibility;
All my other styles for heading, details, sidebar, etc are working as intended. Just can't get the body font color and size to change. Another wierd thing, when I change the font size px for the style it changes the line spacing NOT the font size. Any one have a clue what is going on here? Here's the custom styles I have added to the module style sheet:
/* My BC Template*/
.blog-container h1{
    font-family: Impact, Haettenschweiler, "Franklin Gothic Bold", "Arial Black", sans-serif;
    font-size: x-large;
    color: #F9D100;
.post-title H2{
    font-family: Arial Black, sans-serif;
    font-size: medium;
    color: #F9D100;
.side-panel H4{
    font-family: Arial Black, sans-serif;
    font-size: medium;
    color: #F9D100;
.post-body {
    color: #fff;
    font-family: Arial,Helvetica Neue,Helvetica,sans-serif;
    font-size: 16px;
    line-height: 1.2;
    word-wrap: break-word;
    text-rendering: optimizelegibility;

This answer from Support cured the problem...
Gaurav Sharma (Adobe Business Catalyst Support)
Feb 20 04:12 (EET)
Thank you for contacting us!
I just see your online shop purchase form, which contains update credit card fields,
http://screencastmb.worldsecuresystems.com/img/2013-02-20_1309.png
As per the field description, it's used fo rupdating CC details, not for purchases.
Remove that system field and reinsert the form, and it should then work
Kind Regards

Capacitor & inductor current waveforms not showing correctly

Hello,
After a fair amount of time playing around, I cannot seem to get the current waveforms of a purely capacitive / inductive circuit to show correctly on the oscilliscope.
since I through inductor =( ∫v dt) / L
I get extremely high current values on the oscilliscope (in the region of kA) adn for a purely capacitive circuit - in the region of pA.
ie, a square wave DC source, 10V to -5V, 1ms @ 10V and 2ms @ -5V, period of 3ms - connected to a 1mH inductor.
(∫10 dt)/L = (10 x .001) / .001 = 10A - so at 1ms, the current will rise to 10A ( in a linear fashion)
[(∫10 dt) / L] from 0 to 1ms + [(∫-5 dt) / L] from 1ms to 3ms = 0 = current will drop to 0A in a linear fashion from 1ms to 3ms.
THIS does not show on the osciiscope!
By adding an instantaneous current probe onto the circuit - this will roughly show the correct value - but obviously will not show an accurate waveform.
Any help would be extremely appreciated.
Many thanks.

Thanks for your reply,
I'm using 12.0.1 power pro edition
I literally just opened up the file to check it and to post it here, and it works?!
Rather confusing as it was most definately not working when I started this thread.
Maybe the program needed and clean startup or something.... but the current values were all over the place.
When I analysed the circuit by hand, I would get values for current and voltages but when simulated they were in the range of 500KA etc with a simple capacitor circuit with a 10V sawtooth supply.
Thanks anyway.
SS

View audio wave form in A1 and A2 etc in the timeline instead of the Viewer

It's likely this is an amateur question buuut -
Is there anyway to get the audio wave form to show in the Audio layers in the timeline. The only way I've seen to adjust and play with audio is when I double click on one of the tracks and then the audio tab in the viewer will open. I want to be able to see waveform in the timeline and then add or remove markers and adjust from the timeline -
There's got to be some way to adjust audio and play and stop so that you can watch the video and hear audio changes as you tweak it at the same time.

SEQUENCE--> SHOW AUDIO WAVEFORMS

Multi plot wave form chart

i am acquiring 16 channels simultaniously scan rate of 1000samples/second. using chart with single channel (array of data format) i can see 10 sec duration. with multiplot view of least 4 channel i used waveform property but this will not getting 10 sec duration of x. this is showing just like a graph.
how to show my multiplot at least channel in one chart with continous updation....?
Regards,
Balaji DP

please find an attachment.
chart 1.jpg
i am trying to show the 4 channels of with 1000samples/second. even i am using the chart. i can see only 1 secon of data.
if i try with single channel array of data with out using wave form property with chart i can see 5 minutes of updattion.
how to see multiple plot atleast 4 channel with 5 minutes of duration?
Regards,
Balaji DP
Attachments:
chart1.JPG ‏39 KB
chart2.JPG ‏9 KB

Showing Correct Sample Wave Form

Similar Messages

Maybe you are looking for