Showing Data in A Pie chart

As part of a school wide intiative i must show pre and post test data in my classroom. I must be able to show how many studetns were proficient on the pre test and well as on the post test. I have my data all ready to go with each kids test score. How do i create a pie chart that show the percentage of students with a 85% or high?

k,
Select the Data in your Table.
Insert a Pie Chart.
Set the label display format option for "%" or "Number", as you wish.
That should do it.
Generally the best place to start with charting is to sketch one, as you imagine what you want it to look like, and most importantly, write in some labels describing the chart. That helps you to think about how to construct the chart. Unless you know what it should look like, it's difficult to know what data to chart and what options to use.
Jerry

Similar Messages

How to add more data point in Pie chart

The default data point for Pie chart is 5, how could I add more data point, I notice that I can do assign the cell to the value under data in General tab property of chart pie, but, in the sample drill down, there is no value for that value, and it still has 6 data point.

Hi DFW
The sample file has got the spreadsheet range missing thats all. Just add the range you need to your pie chart.
Regards
Charles

How to show negative value in Pie Chart from Webi?

I have below example data, I want to convert this to a pie chart in Web Intelligence, my problem is after I convert it to a pie chart, the revenue '-30' is shown as '30', looks like the pie chart is not suppor the negative value to show, I want to know if there is any workaround or solution to make the pie chart to show the negative value? Is this behavior is by design? do we have any official document to explain this?
The product I used is BOE XI 3.1 SP3.
Department    Revenue
A                      100
B                       -30
C                        80
Edited by: Alex Wang on Jul 13, 2010 5:51 PM

Why are you showing this information as a pie chart? It doesn't make sense to try and display a negative slice in a pie chart. I can't really think of a logical way to try and draw a negative slice in a pie chart. With a pie chart you will need all your information to either all be positive or all negative, otherwise it doesn't work.
What you need is to have a bar chart, with positive and negative values on the y axis.

Showing % ,Name ,Value in Pie Chart

Hi Experts,
I am running into an issue
I built a pie chart i want to show Data Labels with (Value,Name,Percentage of Total)
but in properties we will get only Name and Value or Percentage of total and name.
!http://img268.imageshack.us/img268/5968/piechart.jpg!
How can i achieve both??
thanks,
saichand.v

I have modified the formula.
!http://lh5.ggpht.com/__i78CpC3_Bc/Sx5uUxpThMI/AAAAAAAABuk/3OKoseu_3tQ/s800/Concat%25NameVal.jpg!
Criteria looks like
!http://lh6.ggpht.com/__i78CpC3_Bc/Sx5uU0mwIPI/AAAAAAAABuo/SnJ2pE2doSc/s800/Criteria.jpg!
And Pie Chart Looks like
!http://lh3.ggpht.com/__i78CpC3_Bc/Sx5uU3TteKI/AAAAAAAABus/wXuwoZ9Skuc/s800/PieChart.jpg!
Edited by: mail2diptesh on Dec 8, 2009 8:53 PM

Data labels on pie chart

Hi,
I want both the series label and % value to display on my pie chart, but what i want is % value to be displayed inside pie slices and series label outside the pie slices, right now we have option to do either of the one
my Report Builder is 9.0.4.0.33
can anybody help me regarding this.
Thanks.

hello tammy,
i just created this request in the idea place
enhance pie chart data labels : View Idea
i was just thinking (yes, you should be afraid - smile)
it would make life much easier if there was a link in the forum message toolbar that linked to the submit idea form in the idea place and included the link for the message thread from here at the bottom of the request. that way the developers could also see what other people think about the issue. what do you think?

Can't show data labels in pie graphs as decimal number if the crosstab data

I want to show my data labels in diagrams, as percent values, with three decimals.
It occurs (in version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)) it is only possible if the data format of the crosstab data also shows data with decimals. If the data are in integer format, the graphs data labels can only be shown in integer as well.
Does anyone know how to fix the problem?
In version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18) we can have a crosstab showing integers and a pie graph showing labels of pie slices where the labels are in percent with three decimals. It seems it does not work in the newer version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
Thanks in advance

It seems I have another similar problem in version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26):
I have a Bar (Percent) graph based on a crosstab where the data is formatted as number with two decimals.
The labels in the graph shows as number (0,76 instead of 76% and 0,13 instead of 13%). I want them to be shown in percent format.
The Data Label format is set to “Number” with two decimals. I can change the Data Labels to Percent with two decimals and then it shows the data labels in the graph exactly as I want it. But after I have saved the workbook and then opened it again the changes has been “revoked” and is once again set to number with two decimals instead of percent.
thanks (again) in advance

Data Lables in Pie Charts

Can we define data lables within a pie chart in OBIEE answers ? If so appreciate if you could let me know how this can be setup
thanks!

If you want to change the names of a label which comes from an object, you must create a variable and change the values manually using the "where" or "If Then Else"...

Showing data series for two charts on one

Hi
I need to represent 2 sets of data on one chart. The first is a linebar chart and the second is a scatter chart. This can be done in Excel by adding multiple named data series.
Is this possible with crystal report 2008.
Thanks

I'm a bit late to discussion, but this is I think the most relevant post I could find.
I have the same problem - displaying multiple data series on the same chart (line chart or scatter by date). My problem is complicated by the fact that number of series also depend on the data point.
Essentially I need to plot readout of test in a monitored room where different number of sites maybe tested depending on the room. So one room might have three data readouts (three sites), and another five (five sites), and when charting by room, one chart will have three series, and another five. So even considering using overlapping transparent charts, there are issues of conditionally enabling/disabling the whole chart, of determining maximum number of charts (and room might have dozens of test sites) and also displaying appropriate legend(s).
There must be a better way!
TIA,
Andrey.

Pie chart legend showing digit "1" when we set "ignore blank cells"property

All,
We have pie chart in Xcelsius 2008 that shows the data with legend value and we have also set the ignore blank cells property to ignore the blank value from column. but once we set this property, it displays the digit "1" in the legend when there is no data.
we are expecting that nothing should be displayed in pie chart legend when there is no data for the pie chart.
Thanks,
Sourabh

hi Sourabh,
I could replicate your scenario.
Workaround is to create a duplicate of this chart. Go to properties of this new chart.
Go to Appearance ->
Uncheck
- Legend
- Mouse-over values
- Data Labels
for this chart.
Write a logic in excel using 'IF' to verify if your data is empty.
Use 'Dynamic Visibility' feature to display this chart only when your data is empty.
Display your original chart if your data is not empty.
Regards,
Vamsee

Pie Chart summarizing grid data

New to Flex. Searched for a method to build a pie chart based on a column in the grid we've created.
So Far:
The grid gets created based on info passed in a form.
I can get two pie charts to be created based on specific columns in the data.
The pie charts currently have 1 slice per row of data.
Am I missing an easy way to build a Pie Chart that summarizes this?
Instead of One Pie Slice per record, how do we get one pie slice per unique value in the data column?
For instance:
a datagrid of source IP | Dest IP | Dest Port | Action
I'd like a pie chart showing the percent of data per source IP.
Is there something built in to Flex to handle this?

Cool... So if my XML looks like this:
<options>
<option>
<datetime>2008-04-21 14:15:49</datetime>
<origin>stone</origin>
<action>reject</action>
<rule>default</rule>
<srcip>192.168.93.64</srcip>
<dstip>192.168.201.10</dstip>
<dport>988/tcp</dport>
</option>
</options
And datagrid dataprovider is {eventData},
eventData = event.result.option as XMLList;
would it be:
var ipSummary:Object = {};
for each (var record:Object in eventData) {
ipSummary[record.srcip] = (ipSummary[record.srcip] || 0) + 1;
var pieData:Array = [];
for (var key:String in ipSummary) {
pieData.push({ srcip: key, activityCount: ipSummary[key] });
The PieChart would look like:
<mx:PieChart id="piechart2" dataProvider="{pieData}" showDataTips="true">
<mx:series>
<mx:PieSeries id="pieact" displayName="Source IP" field="activityCount"/>
</mx:series>
</mx:PieChart>
Obviously I'm New at Flex...

Why can't I access the data when I right click my pie chart any longer?

I don't know what happened but I need to change some data in my pie chart but I nolonger get the data option when right-clicking the chart...

then I guess at some point it has been ungrouped, which makes it simply a collection of objects, rather than a graph. you're supposed to get this message when that happens. did you see this at any point? when did it stop being editable?

Pie Chart Only Displays the Data of the First Row of the Table

Hi Experts,
I have a problem that the pie chart will not change when click on a second row or other rows on the table. It only displays the data of the first row of the table. How can I set up to make it reflect on any rows when I click the table? Please help, and I would very appreciate that.
Thanks,
-Don

Thanks a lot for your response. I have realized that the pie chart behaves that way, so I just use the filter to see the specific data that I want. Also, you can drag the row and drop it right at the first row to see the data in the pie chart.

Trouble creating pie-chart

Post Author: ujain82
CA Forum: WebIntelligence Reporting
Hello, I am having trouble creating pie chart. I am calculating different count values from different data providers. Now I need to create a pie chart showing the proportion for each count as I can find the percentage of count.
My scenario(task):I need count on persons depending on searching on complaint text. So for each search I have a data providers. Like this I am searching for 8 criteria. So I have different data providers for each search. I get person counts from each criteria.
Now I want to show it in a pie chart. But I could not make it done.Does anyone faced a similar problem? How do I solve my problem?
Any comments?

Post Author: Chris Chen
CA Forum: WebIntelligence Reporting
Hi ujain82,
Because you have some data provider,so some metric may have no conjunction,i suggest that you creat variables to reuse them.

Pie Chart Creation from set of Columns.

Hi all,
I have got a query in BW. the Query output looks like.
A B C D E F
1 2 2 3 4 5
So now the o/p gives a clear view that there are no rows in my Query. Now on the basis of this query i want to make a pie chart showing all the values of ABCDEF in it.
Please help me to build this.
Regards,
Soumyadeep.

Hi
Littile modification in last reply. You can create chart based on ristricted Key figures, only if that structure is in Columns. Now for your query you can create separate pie chart for A, B, C etc.
As these will be treated as separate 'Data Series' & you cannot club more than one data series in pie chart. You have to create Bar or Column chart.
regards
Sandeep

Problem creating pie-chart

Post Author: ujain82
CA Forum: Desktop Intelligence Reporting
Hello, I am using BO 6.1
I am having trouble creating pie chart. I am calculating different count values from different data providers. Now I need to create a pie chart showing the proportion for each count as I can find the percentage of count.
My scenario(task):I need count on persons depending on searching on complaint text. So for each search I have a data providers. Like this I am searching for 8 criteria. So I have different data providers for each search. I get person counts from each criteria.
Now I want to show it in a pie chart. But I could not make it done.Does anyone faced a similar problem? How do I solve my problem?
Any comments?

Attached is part of the sub-vi where I am having the problem. I tell Excel which cells to use for the pie chart. If I use "Source 1" (8 cells) the pie chart is created successfully. If I use "Source 2" (14 cells) the pie chart only uses the first cell. I can go to the Excel file and select all 14 cells manually and the pie chart displays correctly. I also tried 9 cells with no luck, it seems that 8 cells are the limit. I am trying to find what is causing the limitation. I have also attached the sub-vi.
Attachments:
Pie chart block diagram.JPG ‏61 KB
M-51539-001 Create Pie Chart.vi ‏108 KB

Showing Data in A Pie chart

Similar Messages

Maybe you are looking for