Showing default input with possible entry help

Hi all,
I am writing a BAPI to populate one field ( input/output box )
I want to attach a F4 help to that i/o box , but in addition to that one specific entry from F4 help should always appear in that box by default .
i.e. it is the most probable entry which should come by default,
and only in less cases when user wants to select other entry,
he should be able to do so thru F4 help.
Any suggestions plss...
Thanks,
Subodh

Yes,
actually it is a BAPI for SOA.
and this is the zoom BAPI.

Similar Messages

While downloading software update for Itunes, getting message saying detecting Ipad in recovery mode and telling us to restore Ipad to original settings, which we don't want to do. Also cannot turn on Ipad; shows Itunes symbol with connector. Help!

While downloading software update for Itunes, got message saying detecting Ipad in recovery mode and telling us to restore Ipad to original settings, which we don't want to do. Also cannot turn on Ipad; shows Itunes symbol with connector. Help!

No promises but a System Reset is worth trying:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark.

Time manageru2019s workplace -No possible entries help available for this time

Hello Experts,
I am configuring time manageru2019s workplace.
I can insert an employee , I can see his detail, planed schedule of time, but I cant change its TIME ID it is showing there like ?03 ( No possible entries help available for this time data ID )
I have configured Time IDs also accordingly.
I used definition set SET_BE
And subsets P,Q,R
I created time data IDs A- Absence ,B- Avilability ,U-Leave
Please let me know where I am going wrong.
Thanks and Regards
Jaydeep Jadhav

Hi, 
Recheck all the nodes under TM->TMW. If you have maintained groups , please check them.
Also request the abaper to debug and find which query is failing.
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"

How to change System Key Board Default input language(registry entry) using c# code

Hi All
Please help me to write a small console application which helps to change keyBoard default input language in registry using c# code (Manually we can change as follows: Control Panel\All Control Panel Items\Region and Language\ KeyBoards and languages\Change
KeyBoards\Default Input Language)
Note: once system rebooted, English language should not be selected by default. Previously selected language has to be retained after system rebooting

Hi
Avatar
Would you mind letting us know the result of the suggestion?
I temporarily mark
cedric’s last response as an answer. You can unmark
it if they provide no help.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why is logic pro only showing 8 inputs with core audio?

I use Logic Pro and Pro Tools HD TDM and I have 2 audio interfaces with a total of 20 analog inputs. It seems that in Logic, I can only access 8 inputs. I suspect this has something to do with core audio and logic but there has to be a way around this that allows me to use all 20 inputs right? Any help would be greatly appreciated.

Too bad you're not running an earlier version of Pro Tools, prior to 8.03 or you could use your system under DAE and have access to the HD system in Logic, or at least in some versions of Logic 9.
http://avid.force.com/pkb/articles/en_US/Compatibility/en363063
You will be limited to 8 ins under core audio as I recall... this is due to Avid's core audio driver.
Here's more about HD support.
http://documentation.apple.com/en/logicpro/tdmguide/index.html#chapter=preface%2 6section=1%26tasks=true

SHOW ALL galleries with weird layout--help?

Hi, I'm trying to build a gallery for my dad who'se a
painter.
Thing is the Gallery in the demo files is wondeful but he
wants a very strange layout.
He needs b]all the galleries' thumbnails to display as
default..(!)..having a selector for the individual galleries is not
important.
So it would be like this;
title 'sculptures'-- then all the thumbnails of the
sculptures
title 'watercolours'-- then all the thumbnails of the
watercolours
title 'oils'-- then all the thumbnails of the the oils
Can someone suggest how this can be done please.
Many thanks

Hey Smoky,
Depends on our XML
If you have each set of data in a separate XML file, just
make multiple Datasets and make a gallery section using one dataset
per section.
If you have all thumb info in one XML file, you will need to
make multiple datasets by filtering or a spryif statement to filter
the dataset as you build the thumb group.
Give us some more details on your setup and we can be more
specific.
Thanks,
Don

Cannot see the default input help values in the preview mode ALDesigner P&F

Hi experts,
I'm currently implementing a HCM PROCESS FORM process.
I'm wondering why I'm not able to see the default input help of a dropdown UI ISR element in the Preview mode within adobe live cycle designer.
I have linked my field with SAP-PA backend-service through Form Scenario.
Within adobe live cycle designer, in the Binding tab page and then Element Values, I entered the following value in the Objects field: $record.sap-vhlist.<Field
name>\.DATA\.FIELD.item[*], whereby <Field name> is the name of the form field. but cannot see any values...?
Could you provide me any help, advices on that.
Thanks in advance,
Regards
Louis

Hi
You can do that in two ways.
One is from PA services provided by SAP. Other one is you care create a Generic service to load the values.
1. In HRASR_DT tcode select the process and create the backend service for SAP_PA and add the field Employee group (PERSG ) by choosing IT 0001 and screen element then select the Input Help and check the box for PA service .
2. Create a backend service and create the BADI and inside that do the logic to load the Employee group from FM and bind the value to the field.
Please refer the Enhancement Implementation HRASR00_USER_NAME for the sample. Class CL_HRASR00_GS_USER_NAME.
see this link
http://help.sap.com/saphelp_erp2005/helpdata/en/82/b6b94278560c31e10000000a1550b0/frameset.htm
Kind Regards,
Mukesh

Upgraded to 5.0, then 5.0.1. In the process the various calendar "types" disappeared, but at least all entries showed in Ical, with entries made after the upgrade showing pinkish/red. Yesterday all formerly made entries, disappeared. any tips?

Upgraded to 5.0, then 5.0.1. In the process the various calendar "types" disappeared, but at least all entries showed in Ical, with entries made after the upgrade showing pinkish/red. Yesterday all formerly made entries, both old and in the future, disappeared, only recently made ones in pink/red are shown. any tips?
I did switch off and on, did a sync with itunes, etc, but no luck.

RIM doesn't push the upgrades -- your service provider does so, once they have certified and approved the operating system upgrade for their devices.
But, .973 does work on the 9520 in the manner you wish it would, I've used it myself on that model.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

How to Change the Default SSH Port from Terminal ? now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

I recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

i recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

fingers crossed, it appears they are working the bugs out of this update....i was able to post a pic to my newsfeeds/time line this morning....first the picture went into the ios album but within a minute, it appeared on my timeline! im glad ...

HT1222 Last time I did an update...I lost most of my music...thousands of songs and had to reinstall them!!!! I am scared as **** to do another update!! I have radio shows to do and can't afford to spend the time with this. Help anyone?

Last time I did an update...I lost most of my music...thousands of songs and had to reinstall them!!!! I am scared as **** to do another update!! I have radio shows to do and can't afford to spend the time with this. Help anyone?

A bit late for this advice now, but hopefully you'll know what to do next time.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

I have iPad 4th Generation with iOS 6.1.3 Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email. When I tap of the attachment, the iBooks icon no longer show itself. Can someone please help?

I have iPad 4th Generation with iOS 6.1.3 Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email. When I tap of the attachment, the iBooks icon no longer show itself. Can someone please help?

Thanks for all (Ocean20 & Courcoul) who replied.
Reset the device did not help me but it does triggers me to attempt to resend the PDF file attachment on email--and it works the 2nd time. My problem is now solved.
The Adobe Reader is very helpful--it allows me to scroll through the document easily, unlike iBooks, where I cannot scroll straight up or down.

Problem with Entry Help

HI,
My system is configured properly and could fetch from Backened systems using Find data bar. i could pull bapis's frim r3 backened which is configured well.
I am trying to create Entry Help.When i go to Tools->Entry List manger->
when i select value help list,Wizard is opening.
In wizard its asking for select systems, but i could not find my R3 system in that list.Any thing i missed.
Any pointers would be appreciated with points
Regards
shekar chandra

Hi,
You cant find R3 system in Value help wizard. It can display the following system only
 SAP BI systems
 XMLA systems
 JDBC systems
Refer the following link
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/3d/0dff3485644ad28483e9caba04d9a0/content.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/3d/0dff3485644ad28483e9caba04d9a0/content.htm</a>
Regards,
Hemalatha
/Assign points if helpful/

Open CC applications to default preferences with no user input

I am searching for a way to open CC applications to default preferences with no user input. I understand there is a key board short cut (command/option/shift on start) but I am hunting for a way to have the preferences always revert to default. In the past I have written a script to delete the preference files upon computer start up but once again, it needs to be rewritten. Is there a method that does not require KLUDGE?

Try:
*http://kb.mozillazine.org/Preferences_not_saved

Showing default input with possible entry help

Similar Messages

Maybe you are looking for