Showing documents from third party DMS

Hi All,
We have a requirement where we want to show the documents in EP from a third party DMS.
Can anyone guide how to proceed on that?
Regards,
Piyush

Hi,
this depends on what your third party DMS is.
What you normally would need is a repository manager: http://help.sap.com/saphelp_nw2004s/helpdata/en/30/a12ddeea29534eaa33c67fefed3504/frameset.htm
SAP provides some repository managers in the standard. One that could be used is the WebDAV Repossitory Manager if your DMS supports this.
Some DMS vendors provide Repository Managers for the SAP NetWeaver Portal. Therefore it could be a good idea to ask your vendor if there is something available
Kind regards
Karin

Similar Messages

  • DMS document migration from Third Party DMS server(Omnidocs)

    HI guys,
    I would like to migrate document from Third party DMS server to  sap DMS server.
    What is the apporach.
    1. The thir party dms server is protected with login name and password.
    How i can extract data from the software.
    Please spread your thoughts on this.
    what is the function module to  download the contents of the server. by passing the url.
    with regards
    Giri

    use ALE scenario to send the documents

  • Show documents in portal from third party DMS

    Hi All,
    We have a requirement where we want to show the documents in EP from a third party DMS.
    Can anyone guide how to proceed on that?
    Regards,
    Piyush

    Hi Piyush
        this can be achieved using iView, steps required,
    1. You have to create a system in portal for your DMS.
    2. Create a database iView based on the DMS systems.
    Regards
    Dharma

  • Coding to scan document from third party in SAP

    Hi,
    Plz send the coding to scan from the third party (scanner) into SAP and that scan copy should need to store as a JPG file format in one folder.
    Thanks in advance

    Hi Madan,
    i also have similar requirement like this, i have to transfer scaned copy of document from DMS system to SAP system               if u got he solution ,please update the same.
    thanks and regards.
    Bharath

  • TREX, Portal and third party DMS

    Hello,
    I would like to have the possiblity to search for documents in the portal. The problem with it is that the documents are in a third party DMS called D3. The points I get stuck in the middle of nowhere are:
    - How is it possible to connect the portal documents with the DMS (as content server). What do I have to configure?
    - How to configure (if possible) TREX that he is indexing the documents in the DMS (there is not only the way from the portal to the DMS but also to put the documents in the DMS's normal way into the DMS.
    - Where to start, what to read and how to make light in the black darkness?
    I think at this point anything that helps me to understand the mechanismen behind TREX, portal content and content server will help me.
    Thx in advance,
      Vanessa

    Hi Vanessa,
    for the Portal to connect to D3, you'd have to develop a so-called "Repository Manager" for D3.
    This is Java development against the "Repository Framework" (RF) API. You will find hints how to do this in the developer guide for enterprise knowledge management.
    [http://help.sap.com/saphelp_nw04s/helpdata/en/42/631a15c81f0bcce10000000a114cbd/frameset.htm|http://help.sap.com/saphelp_nw04s/helpdata/en/42/631a15c81f0bcce10000000a114cbd/frameset.htm]
    If you manage to achieve this, the connection for indexing and searching to TREX is taken care of for you by the RF.
    Best,
    Karsten

  • Incoming invoice from third party system

    Hi All,
    Could you please help in choosing functional module or bapi or badi's for incoming invoices that are receiving from third party system. I have no ideal about that but the SAP has to be loaded using idocs. what is the reason to choose the above ones
    Thanks in advance for response.

    Why not starting with docu?
    The general process  is explained well in help.sap.com
    As a service, put this into your Google: vendor invoice edi site:help.sap.com

  • Data Extraction from Third party system to BW System issues...

    Hi Experts,
      I would like to know about data extraction issues from third party systems like hyperion or DB2 or Sysbase to BW system, proper procedure to minimise risk facors, etc.
    I hope hear from you soon...
    Thanks in advance....
    Regards,
    Nagendra KReddy

    Hi,
    Below is a document for DB connect. in that frequent problems also mentioned.
    Create DataSource for DB Connect step by step
    -Sriram

  • Return to depot - original order from third party location to customer

    Hi,
    A return order has been configured for materials which have originally gone from third party location to customer location. During return process however the material is coming back to the depot, not the third party location. Now while trying to create an excise invoice after posting goods issue, the material is not showing in the list of excisable commodities. Please suggest a solution.
    Thanks,
    Kasturi

    There is no concept called third party returns in standard SAP.  Check this link where the same topic was discussed
    [Re: Return Of goods in Third Party Process|Re: Return Of goods in Third Party Process]
    thanks
    G. Lakshmipathi

  • Can not receive emails from third party email accounts

    Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
    exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally. 
    This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
    Thanks a lot!! 
    Sammy 

    Checklist for testing inbound email problems, I am assuming outbound emails works ok.
    1. Check Port 25 forwarding on all modems routers/firewalls
    2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
    3. If using POP Connector Service, make sure POP accounts are created properly
    4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

  • Sender RFC from Third Party System

    I have a vendor who is actually communicating through RFC from third party Application to SAP R/3. Now we are trying have XI in between. Where as with minimal impact on both sides.
    Solution.
    1. Have the RFC made as ZRFC in XI. Let the vendor call the RFC in XI ABAP and internally make an RFC call through XI Interface to R/3 as Sync Interface. Because we need to report the information back to the system where the request initiated.
    2. Have RFC INI file copied as SAP Suggests under one of the folders. Develop the regular RFC to RFC Interface via XI.
    Is there any other alternatives other than the above mentioned solutions? Or out of those 2, which one will provide the best performance
    Appreciate any feedback. Please advice

    That's exactly what we are trying to achieve here. By Eliminating direct connection R/3, we are placing XI in between. But with the budget/timeline constraints from the Partner side, we are trying to have minimal change on the partner side. They might not change something to web service etc...
    Here is the text about INI file
    You can configure the non-SAP RFC client to connect to the sender communication channel in the following ways:
    ■       By defining the parameters PROGID, gateway-host, and gateway-service within the saprfc.ini-file using RFC-SDK.
    ■       By using appropriate parameters in the function RfcOpenEx.
    If you use the saprfc.ini-file, the respective RFC destination has to be of type R.
    All the parameter values used within the saprfc.ini-file or with the function RfcOpenEx should match the entries maintained within the corresponding sender communication channel.
    Example for the saprfc.ini-file is as follows:
    DEST=RFCCLIENTEXT
    TYPE=R
    PROGID=P106646.HKExternalClient
    GWHOST=pwdf2153
    GWSERV=sapgw40
    Please check the following link, for the same  text on RFC Sender
    [Help.SAP|http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm]
    Using the same Sender RFC for non-SAP System, please share any ideas

  • Help me!    How to use it as a web service from third party application?

    After using JDeveloper to develop BSSV object e.g. JP550010, how to use it as a web service from third party application?
    TKS!

    Obviously the OP is working on a project for the Bead Society of Southeastern Virginia http://www.bssv.org. Oh, wait, maybe he's researching the Blueberry Shoestring Plant Virus http://abbreviations.yourdictionary.com/bssv
    :D
    John

  • I bought a macbook air and iMac from third party with preinstalled ilife and iworks

    I bought a macbook air and iMac from third party with preinstalled ilife and iworks, can I update to the latest ilife and iworks without being charged even though i did not purchase ilife and iworks on my preowned Macs.  I have no CD's or license for those products?
    thanks

    No, you will not be able to do that.

  • Problem in committing a new document in third party repository through Ente

    Hi all,
    I am trying to create a document in third party repository through enterprise portal GUI. The steps I am following are:
         1. I go to repository integrated with the Enterprise portal.
         2. Then go to Folder -> New -> HTML File.
         3. Here it asks me to enter Name of the document and the Contents of the document.
         4. Then Click on Save
    I am trying to implement this functionality by using RF (Repository Framework).
    I have implemented  createResource() method NameSpaceManger.java class. The signature of this class is:
         NamespaceManager extends AbstractSubManager implements INamespaceManager,IMutableNamespaceManager{
    The Code:
    if ((d instanceof IResourceCreateDescriptor) || (d instanceof ICollectionCreateDescriptor)) {
              IRid parent = d.getDestinationDescriptor().getParentCollectionRid();    
              String name = d.getDestinationDescriptor().getChildName();
    name = UriCodec.Decode(name);
    ACEPHandle handle = (ACEPHandle)this.repositoryManager.lookup(parent);
              ACEPNode node = handle.getNode();
    if (!node.isCollection()) {   
                   throw new ResourceNotCollectionException(parent,        
                        "parent is not a collection!");  
    IAccessContext  context = AccessContextFactory.getInstance().getContextOrNullIfUnavailable();
    com.sap.security.api.IUser sapUser  = context.getUser();
    com.sapportals.portal.security.usermanagement.IUser epUser = WPUMFactory.getUserFactory().getEP5User(sapUser);
    ResourceContext resourceContext = new ResourceContext(epUser);
    RID rid = RID.getRID(node.getRid().getPath()RID.PATH_SEPARATORname);
    IResource resource = ResourceFactory.getInstance().getResource(rid,resourceContext);
    IContent content=  resource.getContent();
    InputStream iStream = content.getInputStream();
    byte[] byteArray = new byte[51200];
              int bytesRead = -1;
              try{
              while ( (bytesRead = iStream.read(byteArray, 0,51200)) != -1) {
                   byteArray = new byte[51200];
              }catch(IOException e){
    The Error I am getting in the logs is:
    <b>ContentRetrieval: Unexpected HTTP status 500 Internal Server Error: HRESULT [0x8004022f]</b>
    Please advice me the right way to proceed further.
    Thanks and Regards,
    Ravi

    Please print out the Verbose Stack Trace generated when you run this application.
    I suspect that you FolderPathResolver is not pointed at the directory you think it is. You might want to try printing out
    I_CurrentFolder.getAnyFolderPath();
    and I_CurrentFolder.getName();
    null

  • Optimization in SCM from Third Party Logistics-Business ProcessOutsourcing

    I am compiling an exhaustive list of SCM Optimization touch points from Third Party logistics business process outsourcing point of view.
    Based on your experience, could you list out,
    1) Third Party Logistics business process outsourcing touch points in the entire width of SCM
    2) KPI's to Measure and Optimize at each touch points.

    Few KPI's
    - On time Delivery
    - Response time
    - Quality of WOrk
    - Costing
    - Profit at 3PL

  • Accessing BW Query from Third Party System

    Hi,
    We have a requirement by which user can do the following through the third party system.
    1. User will enter the Parameters in the third party system.
    2. User will then call the BW Query with the above parameters from the third party system.
    3. BW query should get execute based on the parameters (variables) and output to be displayed.
    3. After displaying the output, the same should get passed into the db tables or the flat file to the third party system.
    Ideal steps will be :
    1. Enter the parameters in the third party system
    2. Calling the query from third party system with the
    parameters
    3. Executing the BW query
    4  Displaying the output and
    5. Sending the output back to the third party system
    Kindly advise how can we handle this scenario.
    Regards
    Ramesh Ganji

    hi,
    you can use third party etl tools. I used XtractIS for microsoft analysis services.
    http://www.theobald-software.com/cms/en/xtract-is/xtract-is-plugnplay-mit-sap-und-den-ssis.html

Maybe you are looking for

  • CS3 Crashing

    Help. Whenever I try to test an SQL statement the DW title bar tells me that DW has stop responding and a couple of seconds later the Microsoft Error report box pops up. Whether I click Send or Don't Send the popup it closes only to open up again. If

  • WRT54G v6 Odd Problem

    Hiya. I lurked these forums a bit and looked around but I did not really find my problem listed here. I will describe it as best as I could. I was playing a game online when all of a sudden my Internet connection dropped. I looked at my modem, thinki

  • Drag and drop between different Flash objects

    It is possible to drag & drop items between different flash objects?

  • Mousedown

    Alright, I did some searching around but couldn't find anything really similar to my situation (I was suprised) and with my google search some guy had the same problem, but the solution was a link that is now broken. How do I make a script on my butt

  • Changing names of files in folders

    I have folders which have a number of files: 120.35.jpg 119.02.jpg I'd like to change to: 120_36.jpg 199_02.jpg Any advice would be appreciated?