Showing Error 101
Downloading installing Setting is almost done only 8 minutes ramainnig ,Now showing Error 101.What should I do ?
Error 10# (any #) : Troubleshoot Adobe Download Assistant :
http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio n_2
Similar Messages
-
Ace - connection reset (Error 101)
Hi, I have a problem with a Cisco ACE, after approximately an hour being in production, for all new connections
it gives the message: connection reset. The message on any web browser is: connection reset (Error 101)
It blocks any backend server (Apache).I get same error also when I try to connect direcly to the backend address.
This error saturates the connections on the servers (in the log of the DB I found error connection reset)
Without ACE all work fine, it's not a load traffic issue.
It seems like once opened a connection the ace does not close it anymore!
But the graphical snmp servers do not report the increase in connections, what is mistake ?
The balancer manages two physical servers and is configured in stickyness mode
Please find attached the configuration
logging enable
logging timestamp
logging trap 4
logging buffered 3
logging host 172.16.0.2 udp/514 format emblem
access-list ANY line 8 extended permit icmp any any
access-list ANY line 16 extended permit ip any any
probe http HTTP_PROBE1
request method get url /index.php
expect status 200 206
expect status 300 307
expect status 400 417
probe tcp PROBE_TCP
interval 30
rserver host 03a.it
ip address 172.16.0.1
conn-limit max 50000 min 40000
inservice
rserver host 03b.it
ip address 172.16.0.2
conn-limit max 50000 min 40000
inservice
serverfarm host FARM_WEB
predictor leastconns
probe HTTP_PROBE1
rserver 03a.it
inservice
rserver 03b.it
inservice
parameter-map type http HTTP_PARAMETER_MAP
persistence-rebalance
sticky http-cookie session StickyGroup1
timeout 3600
serverfarm FARM_WEB
class-map type management match-all ICMP-ALLOW_CLASS
2 match protocol icmp source-address x.x.x.x
class-map match-all L4-WEB-IP
2 match virtual-address x.x.x.x tcp eq www
class-map type management match-all REMOTE_ACCESS
2 match protocol ssh any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
policy-map type loadbalance http first-match WEB_L7_POLICY
class class-default
sticky-serverfarm StickyGroup1
insert-http x-forward header-value "%is"
policy-map multi-match WEB-to-vIPs
class L4-WEB-IP
loadbalance vip inservice
loadbalance policy WEB_L7_POLICY
loadbalance vip icmp-reply active
nat dynamic 1 vlan 2541
appl-parameter http advanced-options HTTP_PARAMETER_MAP
interface vlan 125
ip address
access-group input ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input WEB-to-vIPs
no shutdown
interface vlan 254
ip address
access-group input ANY
nat-pool
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
At the moment this happens, the simultaneous connections (command: show conn) on the server are around 350
the CPU load is 2%
sticky database has approximately 24000 records.
Log level is set to 4. But no error report.
Do you need more info to resolve the problem?
Thank you
Best Regards
N.Hello Nicolas,
I wonder if you can include these values:
parameter-map type http HTTP_PARAMETER_MAP
case-insensitive
persistence-rebalance
set header-maxparse-length 65535
set content-maxparse-length 65535
length-exceed continue
parsing non-strict
I also noticed a lot of errors which might be caused also due to these denied under the #show resource usage all which may indicate you are reaching the license limits, but you should discuss it with your Cisco SE, please see below:
Allocation
Resource Current Peak Min Max Denied
Context: vrack254
conc-connections 4 1267 60000 60000 0
mgmt-connections 2 28 748 748 0
proxy-connections 0 1255 7864 7864 0
xlates 0 0 7864 7864 0
bandwidth 572 3824781 3740624 127490624 1416859
throughput 96 3712886 3740624 3740624 1416859
mgmt-traffic rate 476 111895 0 123750000 0
connection rate 1 1729 4500 4500 0
ssl-connections rate 0 0 224 224 0
mac-miss rate 0 15 16 16 4
inspect-conn rate 0 0 1800 1800 0
http-comp rate 0 0 5898240 5898240 0
to-cp-ipcp rate 0 11 36 36 0
acl-memory 8216 10568 744800 744800 0
sticky 22978 22978 31456 31456 0
regexp 19 23 7864 7864 0
syslog buffer 30720 30720 30720 30720 0
syslog rate 0 6 750 750 0
Can you upload the specific error which you are getting also?
Jorge -
PC, Windows 7 64-bit. Dual hard drive setup, primary dirve has 7 free GB. Downloading trial to second hard drive, has 466GB of free space. Download taking 24 hours each try.
First try: Error 101- Could not extract files, check for sufficent disk space and reset download. Cleared off 6 more gigs of space on my primary drive incase that was causing the error. Restarted download.
Try #2: Same error. I dug around and found the full download .7z file. Tried everything to unzip, but every 7zip program I tried gave me an error, said it wasn't an "archive' file.
Restarted Adobe download assistant, got a pop up that said roughly "do you want to retry the current download, click yes to retry, click no to start over" I clicked Yes. It started over. I slammed head on table.
Now have 20 hours remaining on my third attempt at downloading. Maybe we can get this fixed before the error message shows up again?Whenever you delete caches it's a good idea to restart the computer so they can be properly rebuilt. So start by doing this:
Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
Error 101 when finished download adobe assistent
hello i ve tried to download with adobe downlaod assistant the CS6 master collection (trial ) but when finished the downloading process show up the message : error 101 failed to extract files ,because isn;t enough space,something like that.but i have 380 GB free of space!!!!.i ve tried two times: first downlaod to my download folder and second to desktop folder,both of two i have the same folder.i have windows 8 x64.any solution please?
If using the download assistant is failing for you and falsely reporting iinsufficient space on your machine, try downloading/installing the files directly from the page linked below:
http://prodesigntools.com/adobe-cs6-direct-download-links.html
Be sure to follow the Very Important Indtructions section to acquire the files. -
I am trying to install CS511 on a Windows 7 computer. I have gotten Error 101 multiple times. It downloads but won't install. We have plenty of disc space for the program. After the 2nd failure I changed the download destination to the desktop, but it sill didn't work. Thanks.
Not sure I understand the first question... I tried just clicking the Green "install “button. Then I did the troubleshooting steps, uninstalling the installer, deleting every trace of being there before, all of that, no luck. Then I found a link to download the files directly and extract them myself. The 7z showed up as a TXT, so I had to rename that, but same story there... the exe or manual extract, all the same, lots of files that held no data. Finally gave up and just downloaded illustrator, as that is the one program I most wanted to try. I own DW and PS 5, and now need a vector program, so I figured I would see if the whole suit would work well for me, but between the installing mess, and the fact that I couldn't get through to tech support because they were busy fixing Light Room for everyone (Seriously, this was the message on the site, basically), I'm starting to think maybe some of the softer vector programs could be the way to go. This is why I didn't continue in IT 15 years ago, I like it when stuff just works, I don't have time to fight with the program, I barley have time to do my projects. It's a shame too; the cloud and Ipad integration was looking very promising. And Muse is potential personified...
But, I think Adobe software might only be for large companies with IT specialists on staff to make things work.
THank you for your responce though, It is greatly appreciated. -
11i Login Page is showing 'Error on Page' while using IE 7
Hi DBAs,
I am using Oracle 11.5.10.2 with DB 10.2.0.4 (Single Instance). The EBS is on RUP6 and using JDK 1.6.0_12.
I was using Firefox and not getting any issue. I used first time IE-7 (7.0.5x) to access the application. I noticed that Pressing the 'Login' button on Login Page , it was saying in the left bottom of the IE says 'Error on page' and was not navigate to any page or did not perform any action.
I verified all the services and everything was OK. While using Firefox , I was able to navigate the application w/o any issue.
Using IE 7 , I am able to access
http://host.domain:8000/OA_HTML/fndvald.jsp?username=sysadmin&;password=sysadmin
Most of the stuff seems to be working fine while logging in using above URL but the 'GO' buttons are throwing same error in IE 'Error on page'. Rest of the Bottons like 'Edit Navigator' , 'Edit Favorites' are working fine but when on any Page I press the 'Go' button then IE showing Error. It seems to me that when a button need to navigate to next page then IE saying 'Error on page' but when a button have to lunch a new page it is working fine.
All the responsibilities and links are working fine. Application Navigation using Firefox is working absolutely fine.
Seeking your advise and suggestions to resolve the issue.
Thanks
-Samar-Hi Samar,
You can clear the cache as follows (login as applmgr user, and source the application env file):
$ cd $COMMON_TOP/_pages
$ rm -R *
ML Note: 285218.1 is not helpful as I am on later version of EBS (11.5.10.2 with RUP6 and Developer6i Patchset 19). At Client side I am using Windows XP SP3 with IE 7.0.5.x with JInit 1.3.21 and JRE 1.6.0.12.Did you review the steps under "Recommended MSIE Browser Settings" section?
Can you reproduce the issue with JInitiator? If yes, any errors in the JInitiator console window? Enable debug (you may also enable trace for Sun JRE) and see if any errors are reported there.
Note: 549423.1 - How to enable tracing and logging for Sun JRE (Native Plug-in)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=549423.1
Regards,
Hussein -
Tds report generation showing error
hi experts ,
in printing of tds certificate showing error .
"no data selected for printing " mess no:8i 000
the problem is comming when i maintained tds certifate no configaration .
without that tds form printing is working ?
please help me in this issue ?
thanks .
deepthi ?Hi,
Check ur TDS certificate no. ranges again.
At the time of print preview of certificate, you will not be able to view the certificate no. but once you print it, you will get the certificate no. as well.
Regards
Anuj Agarwal -
How to show error message in a report program
Hello Guys,
I am making a report using smartforms. I am successful in showing data but problem is if if i put a value in parameters that does not exist is database, the smartform runs and related fields shows as empty fields. But the form is running. I want to show error message if the parameter values dose not matches with the database values. The message will show as Document not exists
So i used related error msg here like
if sy-subrc ne 0.
message e357.
endif.
But it is not working for passing values to smartform. It works if i use in classical report. Plz help me on this issue.
Thanks,
Rosaline.>
Rosaline. wrote:
> Thanks all for reply. Should i have to use message before call function 'SSF_FUNCTION_MODULE_NAME' ? I tried it but not working.
>
>
if it_final[] is not initial.
>* if sy-subrc ne 0. ---> "Remove this condition check, it not required
> Message e000(8i) with 'Parameter value not found'.
> endif.
> * endif. ---> "remove this
>
Hi,
Sy-subrc doesnt need to be validated here, remove that If condition and check again.
Regards,
Karthik D -
i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!
Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off. -
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
my iphone 3gs is showing errore wen i turn on debug and some apps will open and then close
There's an apple store in my city but it is about a 20 minute drive and I do not have apple care. Do you think they would still help me?
-
My Ipod doesn't want to sync with itunes showing error (-48)
My Ipod doesn't want to sync with itunes showing error (-48).. What can I do cause I can't add songs to the ipod....
If you have not already, shut down your computer. Do this to reset your iPod
http://support.apple.com/kb/HT1320
Start up your computer. Run iTunes. Connect iPod. Try to sync again. -
my ipod touch is showing the "connect to itunes" screen.. and on connecting to itunes and clicking on "restore" it shows error 3014.. what do i do?
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
SSRS query shows error no columns
this is the query command Text:
="select pallet_id, pallet_create_dm,pn_id from MATS_ITG.pwax_pen_link where pallet_id in ("& Join(Parameters!pallet_id.Value,",") &")"
when it querys it shows error
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DsPartial_lookup'. (rsErrorExecutingCommand)
ERROR [42703] ERROR 2624: Column "SGAC2207H0" does not exist
pallet_id is a multiple value ,SGAC2207H0 is just my data
can not figure out why, Please help meHi ,
Pallet_ID parameter seems to passing string like 'SGAC2207H0' . Check and change the parameter to pass numbers by checking the assignment to the value column in the parameter. If still need the string to be passed , Try the below expression
="select pallet_id, pallet_create_dm,pn_id from MATS_ITG.pwax_pen_link where pallet_id in ('"& Join(Parameters!pallet_id.Value,"','") &"')"
Best Regards Sorna
Maybe you are looking for
-
Messages not reflecting in PI system.
When sending a message from R/3 system using proxies I was able to see the messages in SXI_MONITOR of R/3 system. While debugging, message is getting transferred into the XI structure. But, the same message is not reflecting in the PI system when sea
-
Mail 1.3 for 10.3.9 version : application refuse to function correctly
My problem is the following : when I open Mail 1.3, on my 10.3.9 version, the application refuse to function correctly : the first window wich must open at the beginning doesn't want to open, and when I want to quit this, I can't quit it normaly, it'
-
JAXP DOM reading and writting issues
import org.xml.sax.*; import org.w3c.dom.*; import javax.xml.parsers.*; import javax.xml.transform.*; import javax.xml.transform.dom.DOMSource; import javax.xml.transform.stream.StreamResult; import java.io.*; public class Test { public static void
-
Dealer invoice excise duty..?
Hi all Can anybody explain me about , wht is dealer invoice with excise duty. How it wil difffer from other invoice .. What are the other excise invoices are there while purchasing ..? Thanks sap-mm
-
SONGS USING TOO MUCH MEMORY IN ITUNES TO TRANSFER TO IPOD-ANY HELP?
I recently started using iTunes to transfer songs to my iPod and burn CDs. I have approximately 200 songs in my library and the memory usage is just under 8GB!! I can only transfer about 100 songs into my 4GB mini iPod. I changed the settings to atte