Showing error in read_text function module

- Forcast ID Number: Read function module READ_TEXT where ID = Z001, Object = VBBK to get the Forcast ID. Display it on the output.
CALL FUNCTION 'READ_TEXT'
      EXPORTING
      CLIENT                        = SY-MANDT
        ID                            = 'Z001'
        LANGUAGE                      =
        NAME                          =
        OBJECT                        = 'VBBK'
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        =
      TABLES
        LINES                         =
    EXCEPTIONS
      ID                            = 1
      LANGUAGE                      = 2
      NAME                          = 3
      NOT_FOUND                     = 4
      OBJECT                        = 5
      REFERENCE_CHECK               = 6
      WRONG_ACCESS_TO_ARCHIVE       = 7
      OTHERS                        = 8
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
its showing error---unable to interprete OBJECT.possible cases of spelling or comma error

Look at the Bold ones ... U need to give values for
language and name
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'Z001'
LANGUAGE = ' '
NAME = ' '
OBJECT = 'VBBK'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
LINES =
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Similar Messages

Error message for function module

I have created a custom function module. I have activated it. But when i'm trying to use it in a program it is showing an error. The function module has 'TABLES' but it is showing error as:
"field "TABLES" is unknown. It is neither in one of the specified tables nor defined by a DATA statement".
Please help me!!
Thank you.

Hello Titan,
Generally you get these kind of syntax errors when there is some problem with the format of the program. Please recheck the format of the program in which you are calling the newly created function module. Please check if there are any erroneous '.' or ',' in the program before the 'Tables' partameter of the function module.
Please verify the same.
Regards,
Pavan

How to use read_text function module

Hi how to use read_text function module to read purchase order header text .what are all tht things to pass in ID,Name and Object
thanks,
Mahe

Dear,
Use below code.
DATA:IT_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE,
V_TDNAME LIKE THEAD-TDNAME.
V_TDNAME = PO_NUMBER.
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    ID                            = 'F01'
    LANGUAGE                      = 'EN'
    NAME                          = V_TDNAME
    OBJECT                        = 'EKKO'
TABLES
    LINES                         = IT_LINE.
Thanks and Regards,

Getting error in the function module

Hi everybody.
I have created one function module in se37 and i am calling that function module in the se38 report, when i am executing the report it is throwing me an error.
here in my report i am having the select option fields ex matnr, in the function module importing i have given the parameter matnr over there and when i am running the report it is through an error that
"The function module interface allows you to specify only
fields of a particular type under "MATNR".
The field "S_MATNR" specified here is a different
field type                                                "
IF i am giving the parameter instead of select-options in the report and executing, then the function module is getting triggered and receiving the data what ever the code is available in the source code.
can anyone help me out in this issue so that i can get the data while using the select-option instead of parameter.
Thanks in advance

Hi,
Actually, I wouldn't recommend the use of that tables parameter...
From sap help:
Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
So i definitely would go with either importing or changing parameter...
Cheers,
m.

Type error while calling function module with in FOX formula

Hi,
I am getting following error while calling function module from FOX Formula:
"Types of parameter DAY_IN () and variable J_CALDAY(D) are inconsistent"
Following is the code:
DATA    I_CALDAY       TYPE 0CALDAY.
DATA    N_CALDAY       TYPE 0CALDAY.
DATA    KYF              TYPE KEYFIGURE_NAME.
FOREACH   I_CALDAY, KYF.
   CALL FUNCTION SLS_MISC_GET_LAST_DAY_OF_MONTH
      EXPORTING
         DAY_IN = I_CALDAY
      IMPORTING
         LAST_DAY_OF_MONTH = N_CALDAY.
    {KYF, N_CALDAY} = {KYF, L_CALDAY}.
ENDFOR.
Import parameter DAY_IN is of type sy-datum (that inturn is data element SYDATUM of data type DATS - same as 0CALDAY). Not sure why error is being thrown. Any idea? Thanks.
Edited by: SAP_BOY on Dec 4, 2009 5:26 PM

Hi,
I think It will not identify ,though you have (data element SYDATUM of data type DATS - same as 0CALDAY).Check it out by assigning it through a variable of type D.
Data I_CALDAY TYPE D.
Hope it may work out.
Regards,
Indu

How to capture errors when a Function module is called as BACKGROUND TASK

How to capture errors when a Function module is called as BACKGROUND TASK?.Please advise.
FUNCTION ZRPM_DELETE_PROJECT_DATA_API.
""Local interface:
*" IMPORTING
*"     VALUE(IV_EXTERNAL_ID) TYPE RPM_TV_EXTID OPTIONAL
*"     VALUE(IV_PROJECT_GUID) TYPE RPM_TV_GUID OPTIONAL
*"     VALUE(FLAG) TYPE BOOLEAN OPTIONAL
*" EXPORTING
*"     VALUE(EV_RC) TYPE I
*"     VALUE(EV_MSG) TYPE STRING
*"     VALUE(ET_MSG) TYPE RPM_TT_MESSAGES
IF flag = cl_rpm_co=>sc_true.
    Call function 'RPM_DELETE_PROJECT_DATA' IN BACKGROUND TASK
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_RC
        ET_MSG          = ET_MSG.
    COMMIT WORK.
ELSE.
    CALL FUNCTION 'RPM_DELETE_PROJECT_DATA'
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_MSG
        ET_MSG          = ET_MSG.
ENDIF.
ENDFUNCTION.
In above code how to capture 'EV_RC' when FM is called as background task.

Prakash,
CALL FUNCTION IN BACKGROUND TASK allows no IMPORTING parameters, so that your code will produce a syntax error.
The calling program can only handle errors of remote function calls (RFC) if these are either
- synchronous RFC (that is CALL FUNCTION ... DESTINATION ...) or
- asynchronous RFC (that is CALL FUNCTION STARTING NEW TASK ... DESTINATION ...).
Both synchronous and asynchronous RFC allow the capturing of errors by means of exceptions. But that is a different topic.

There seems to be an error in the function module OPEN_FORM obstructing the

Hi,
There seems to be an error in the function module OPEN_FORM obstructing the process.
Some vendors are not cabaple of usinf EDI and for some reason also not willing to use TTOOL solutions (example Hewlet Packard). In those cases the supplier still would like to get purchase order electronically via e-mail. Sending POu2019s via external mail (SMTP) is basically standard function in R/3 that has been possible since the version 4.5. It is not pre-configured, so (almost) all the required elements needs to be configured.
When we send the output message through ME9F t'code i facing the problem in the above FM.
Please help me how to solve this.
Vijay

Got you, the digital display for Cupertino and Frankfurt are wrong too.
Submit feedback:
http://www.apple.com/feedback/iphone.html

Error EU 802: Function Module does not exist

Hello everyone!
While running a DTP, I'm getting the following error:
EU 802: Function Module RSD_YPERSON_TXT_GET does not exist
Anyone has any idea what this is about?
Thanks in advance for your responses!
Best Regards,
Luís.

Hi,
I have resolved this issue. Turns out that I was mapping a source field INPER (In-Period) directly to 0CALMONTH. The problem is that this source field can have more than 12 periods per year.
The error message was totally misleading... there's SAP for you
Points assigned for the effort.
Best regards,
Luís.

Error Error 6 in function module RSS_PROGRAM_GENERATE

Hello Experts,
When I attempt to run the extract checker for datasource, 0material_LPRH_HIER I receive the following error: Error 6 in function module RSS_PROGRAM_GENERATE.
I referred to the oss notes 328948. But the note is addressing to lower versions of R/3.
I am working on ECC 6.0 and no way that note is helpful to me. I did check for the previous posts addressing this issue and i said already those posts refer to the older version of R/3.
I did check for the previous post and all are addressing to the lower version of release.
KK

This is the reply I got from SAP:
The error error 6 RSS_PROGRAM_GENERATE is more related to Hierarchy .
Are you creating a hierarchy data source if so you need to use
RSA1HCAT report .But normally you will not get any errors when you
create the data source by your own .
705212--> Syntax error in the generated extraction program
Please use the program RSA1HCAT in SE38 to check your hierarchy.

Error 6 in function module RSS_PROGRAM_GENERATE

Hi friends,
While testing the extraction of a hierarchy data source (0CMMT_ITEM_FMCI_PU_HIER) from RSA3, I encountered the above error. I looked into some notes and it was not of much help for me. Please let me know if someone have come across this error and know the solution.
Thanks and Regards
Subray Hegde

Hi,
look at oss note 705212:
Syntax error in the generated extraction program   Symptom
You notice the error by one of the following symptoms:
The loading of transaction data from an R/3 system terminates with a syntax error in the generated extraction program. The monitor displays the error messages:
                        R3027 "Error & during the generation of the data transfer program"
                        RSM340 "Error in the source system"
The extraction within the extractor checker terminates with error message <b>RJ028 "Error 6 in function module RSS_PROGRAM_GENERATE".</b>The activation of transfer rules ends in BW with error message RG102 "Syntax error in GP$ERR$, row... (-> long text)" from the source system. Usually, the diagnosis in the long text of the error message is: "...could not be interpreted. Possible error causes: Incorrect notation or... "
Other terms
OLTP, extractor, data extraction, DataSource, Service API, SAPI,
R3 027, R3 27, RSM 340, RJ 028, RJ 28
Reason and Prerequisites
The error only occurs in the source system, if this contains Basis Release 3.1I and Service API (SAPI) 3.0C Support Package 6. SAPI 3.0C Support Package 6 is contained, for example, in PI 2003.1 Support Package 7 (see attached composite SAP note 673002).
Solution
To correct the problem you need service API 3.0C Support Package 7 in the affected source system. The attached composite SAP note 704971 explains in which software components service API 3.0C is contained, and what the corresponding Support Packages of these components are.
Alternatively, you can also copy the advance correction from the appendix.
/manfred

Errors in Update Function Modules

Hi Gurus,
Please provide me the ways to handle Errors in Update Function Modules.
(I.e. I should export errors from Update Function Module)
Warm Regards,

Use Raise statement ...
FUNCTION-POOL CSTR.
FUNCTION STRING_SPLIT.
IF STRING NA DELIMITER.
RAISE NOT_FOUND.
ENDIF.
ENDFUNCTION.
Regards,
Santosh

BDC_NODATA error in RFC function module.

Hi ABAPers,
The error is 'The FORM "BDC_NODATA" does not exist' in Function group.
I have 2 function groups :Z_BAPI and Z_MB_BUS2017. 1. Z_BAPI was created by me. Customized BAPI FMs were worked fine in that group. now i copied FG :Z_MB_BUS2017 from FG: MB_BUS2017 along with i customized 14 function modules and i activated the group. now these FMs are working fine. but error BDC_NODATA is comming in all function modules which are in Z_BAPI group.
when i activate: below error is coming:
Syntax error in program
Source code LZFPG_BAPIU16                                  Line     43
The FORM "BDC_NODATA" does not exist.
so where can i add include BDCRECX1.
please suggest me.
Thanks in advance
Hari.

Hi Prabhu,
i tried to put in TOP include, but it is showing error:
SELECTION-SCREEN statements can only be used between SELECTION-SCREEN BEGIN and END OF SCREEN( program type is not "1").
suggest me please.
Hari

Error executing custom function module

Hi all,
am trying to read a function module form my java code as below.
There is no problem with the function module.
I think there is some problem with the java code that is written. I am sure the problem lies with the TABLES IT_PRODUCT_DATA STRUCTURE ZOG_ITEM_SCREENSTR.
Function module parameters and signature.
FUNCTION ZGET_CUST_ORDERGUIDE_ITEMDATA.
""Local Interface:
*" IMPORTING
*"     VALUE(IV_ORDER_GUID) TYPE CRMT_OBJECT_GUID OPTIONAL
*"     VALUE(IV_CUSTOMER) TYPE BU_PARTNER
*" TABLES
*"      IT_PRODUCT_DATA STRUCTURE ZOG_ITEM_SCREENSTR
Java Code that is Implemented is attached above.
public ArrayList fetchOrderGuide(String customerNumber) {
          ArrayList itemList = new ArrayList();
                                   ItemSalesDoc itemSalesDoc = new ItemSalesDoc();
          if (log.isDebugEnabled()) {
               log.debug("inside ZAdminLogin");
          try
          JCoConnection aJCoCon = (JCoConnection) getConnectionFactory().getConnection(com.sap.isa.core.eai.init.InitEaiISA.FACTORY_NAME_JCO,
                                                                                             com.sap.isa.core.eai.init.InitEaiISA.CON_NAME_ISA_STATEFUL);
               try
                    try
                         JCO.Function zFetchSalesOrderFunctionModule = aJCoCon.getJCoFunction("ZGET_CUST_ORDERGUIDE_ITEMDATA");
                         // set the import values
                         Table zItemsTable = new Table("ITEMS");
                                   //zPackagesTable.addColumn(Table.TYPE_STRING,"HUI");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JOGITEM");
                         zItemsTable.addColumn(Table.TYPE_INT,"JPRUOM");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JPRSEQ");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JOGDESC");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JLINE");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JOGNR");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JPACK");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JSIZE");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JBRAND");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JWEEKAVG");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JDELFLAG");
                         JCO.ParameterList importParams = zFetchSalesOrderFunctionModule.getImportParameterList();
                         importParams.setValue("BP-104", "IV_CUSTOMER");
                         aJCoCon.execute(zFetchSalesOrderFunctionModule);
                         JCO.Table zRtItems = zFetchSalesOrderFunctionModule.getTableParameterList().getTable("IT_PRODUCT_DATA");
                                        int numberOfPackages = zRtItems.getNumRows();
                                        if (log.isDebugEnabled()) {
                                             log.debug("number of packages " + numberOfPackages);
                                        if (numberOfPackages > 0)
                                             for (int j=0; j<numberOfPackages; j++)
                                                  TableRow itemRow = zItemsTable.insertRow();
                                                  //itemRow.setRowKey(new TechKey(zRtItems.getString("EXIDV")));
                                                  //packageRow.getField("HUI").setValue(zGoods.getString("EXIDV"));
                                                  itemRow.getField("JOGITEM").setValue(zRtItems.getString("OGITEM"));
                                                  itemRow.getField("JPRSEQ").setValue(zRtItems.getString("PRSEQ"));
                                                  itemRow.getField("JOGDESC").setValue(zRtItems.getString("OGDESC"));
                                                  itemRow.getField("JLINE").setValue(zRtItems.getString("LINE"));
                                                  itemRow.getField("JOGNR").setValue(zRtItems.getString("OGNR"));
                                                  itemRow.getField("JPACK").setValue(zRtItems.getString("PACK"));
                                                  itemRow.getField("JSIZE").setValue(zRtItems.getString("SIZE"));
                                                  itemRow.getField("JBRAND").setValue(zRtItems.getString("BRAND"));
                                                  itemRow.getField("JWEEKAVG").setValue(zRtItems.getString("WEEKAVG"));
                                                  itemRow.getField("JDELFLAG").setValue(zRtItems.getString("DELFLAG"));
                                                  zRtItems.nextRow();
                    catch(JCO.AbapException abapException)
                         //Exception thrown, user is not valid
                         if(log.isDebugEnabled())
                              log.debug( abapException.getKey());
               catch (Exception ex)
                    if (log.isDebugEnabled()) {
                         log.debug(ex);
               finally
                    aJCoCon.close();
          catch(BackendException beeEx)
               if(log.isDebugEnabled())
          return itemList;
LOGDETAILS
ZGET_CUST_ORDERGUIDE_ITEMDATA:: - IN: INPUT * IV_CUSTOMER='BP-104' IV_ORDER_GUID='00000000000000000000000000000000'
Oct 9, 2008 6:48:41 AM,507 SAPEngine_Application_Thread[impl:3]_7 Error com.sap.isa.core.eai.sp.jco.JCoConnectionStateful Error occcurred in EAI layer "com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Trying to access row values in a table which does not have any rows yet".
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Trying to access row values in a table which does not have any rows yet
            at com.sap.mw.jco.JCO$Record.checkRowCapacity(JCO.java:12354)
            at com.sap.mw.jco.JCO$Record.getString(JCO.java:12827)
            at com.sap.mw.jco.JCO$Field.getString(JCO.java:11055)
            at com.sap.isa.core.eai.sp.jco.JCoUtil.paramIterator(JCoUtil.java:412)
            at com.sap.isa.core.eai.sp.jco.JCoUtil.logCall(JCoUtil.java:382)
            at com.sap.isa.core.eai.sp.jco.JCoUtil.logCall(JCoUtil.java:236)
            at
All helpful answers will be rewarded heavily

hi,
first of all you do not set the import values for your table correct. You should do something similar like this:
Function myFunction = connection.getJCoFunction(Z_FM");
Table myTable = myFunction.getTableParameterList().getTable("Z_TABLE");
for(int i=0; i<2; i++) {
    myTable.appendRow();
                    myTable.setValue(value1,"VALUE1");
                    myTable.setValue(value2,"vALUE2");
               connection.execute(myFunction);
Did you debug your java class? You should check at which point your java class throws the error.
Regards
Michael

Error while executing Function Module UNIT_CONVERSION_WITH_FACTOR.

Hi experts:
    I'm trying to use the UNIT_CONVERSION_WITH_FACTOR Function Module on
BW but an error message appears, I searched for Notes on the SAP
Marketplace but only found a single note that describes the same
situation that we're experiencing (SAP Note 1333415), the thing is that
such a note is applicable for SAP BASIS version 702 but I'm using SAP
BASIS version 700.
Steps for Reconstruction
- On transaction SE37 call the u201CUNIT_CONVERSION_WITH_FACTORu201D Function
Module.
- Click on the u201CTest/Executeu201D button (or press the F8 key).
- Enter the following values:
   o ADD_CONST = 0
   o DENOMINATOR = 1
   o INPUT = 20
   o NUMERATOR = 1568
- Click on the u201CExecuteu201D button (or press the F8 key).
- The Exception u201CTYPE_INVALIDu201D is reached and the following message
appears: u201CUse a number field for field OUTPUTu201D.
I also tried to use this Function Module on R/3 and the result was the same.
Do you have any suggestion to fix this error?
Thanks in advance for your help,
Francisco Milán.

Hi Francisco,
Check with SAP Note No. 854978.
Hope this would help you.
Rgds,
Mohit

Error while activating function module

Hi,
I copied a standard SAP function module L_TO_CREATE_DN.
When i activated the function group it throws an error saying that " Field "I_COMMIT_WORK" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement".
All the global data has been copied properly in the TOP include but still while activating the function group we are getting the above said error.
If anyone has encountered same kind of issue.......Please guide.
Thanks and regards,
Ramesh

I was also facing the same issue, when I tried copying just 1 or 2 FM's from that FG L03B.
Finally, I copied the whole function group, including all FM's into Z FG, and FM's, and it got activated w/o any hitches. Looks like there is lot of dependency between the includes and FM's code.
Regards
Deepthi

Showing error in read_text function module

Similar Messages

Maybe you are looking for