Showing Full AP name in cisco Wireless phone 7921-site survey

Hi,
I am working on a project where cisco wireless phone 7921 is utilized. We use phones sitesurvey tool for coverage tests. Our AP names are 18 characters in length and are not dispayed in full in site survey screen. Please suggest on a way to increase the display character count in the site survey or to make it a running text. Thank you.
Regards,
Madhan kumar G

Hi Leo,
Thanks for the suggestion. I looked at the Fluke OptiView XG Network Analysis Tablet. Looks very interesting, but looking at the cost of the Tablet, I am pretty sure that my Employer will say NO.
Anyways, Can you recommend some vendor options (It will be really helpful, if you can share the Model information as well) for the list highlighted below.
1. AP Tripod (Reaches 3 meters max) - Need recommendation on AP Telescopic Tripod which should be portable to carry in the Peli Case.
2. Distance measuring tool - Need recommendation on this.
3. Laptop harness - I did some research and found Connect-A-Desk Laptop Harness, which I am planning to purchase
Also, I need your inputs in choosing Antennas for Site-Survey Kit (I am looking at must to have options for the Kit).
Thanks,
CJ

Similar Messages

Voice gaps in cisco ip phones 7921 when roaming between cisco APs

The following problem is faced when cisco ip phones 7921 are roaming between APs:
When a call is establishedon wireless ip phones, and the phones are roaming between APs, a three seconds gap appears but the call doesn't disconnect.
The following log messages are displayed on both APs:
The first AP:
*Mar 1 23:30:30.493: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 001e.4a3f.c5b8 Reason: Sending station has left the BSS
*Mar 1 23:30:30.956: %DOT11-4-MAXRETRIES: Packet to client 001e.4a3f.c5b8 reached max retries, removing the client
*Mar 1 23:30:30.957: Client 001e.4a3f.c5b8 failed: reached maximum retries
The second AP:
*Mar 1 23:33:40.049: %DOT11-6-ASSOC: Interface Dot11Radio0, Station SEP001E4A3FC5B8 001e.4a3f.c5b8 Associated KEY_MGMT[WPA PSK]
What can be the problem?
Thanks

That above error message is frequently associated with another error message "%DOT11-6- DISASSOC: Interface Dot11Radio0, Deauthenticating Station
Reason: Sending station has left the BSS ". This occurs because of the Interference from the adjacent access point. So change the channel and adjust the excessive power on the access points so that there is no too much overlap on the access points coverage cells.

My iPod touch (4) picks up my internet connection at my office and at public hotspots absolutely fine. Additionally, it shows full connectivity to my home wireless network. However, even though it shows full connectivity, it does not truly connect.

It shows full connectivity (three lines) but when I go to the app store...it just loads and loads and loads...My other devices (iPhone 4s, macBook and PC/Laptop) connect fine. I talked to apple for an hour...no solution. I talked to my Internet service provider for an hour..no solution. I tried to contact my router manufacturer but it is rather old and linksys no long provides support for this model. I reset the router factory settings. I reset the iPod from new as well as a back up. The iPod is brand new...two days old. Nothing works. My next step is to purchase a new router. Can anyone out there help?

I will get one tonight and try it...so frustrating! It was a gift for my dauighter and she was so excited to use it...but was so dissapointed We'll see! Thank you for your input...and if it does work...I will be sure to post it...because I have seen other posts and they never post their solution!

Show full file name in File Open Recent Files menu.

I would like to be able to see the full file name in the File > Open Recent Files menu. With long file names, I cannot differentiate between the file I want to edit and the series of images I exported - they all look the same when truncated. (Mac)

I'm working in CS6 on Windows and wondering exactly the same thing. I usually export PDFs or JPGs of current work using the same or very similar names for tracking purposes but trying to open recent files then becomes a game of trying to figure out which of the various identically-truncated file names actually corresponds to the file I want to reopen.
Is there a way to get Illustrator to display the FULL file name in the Open Recent Files menu?

Finder no longer showing full file name of mp3

How do i get finder to show me the full and complete file name (in my case, artist-title-label) for these mp3s? i can see the full name in the path at the bottom but i want to see it when i search it. My workflow with Ableton and creating text tracklists for music mix sets depends on it. I need the two file names to match rather than the mp3 just showing the info less the artists name.
thank you.

http://www.digitaldjtips.com/2011/02/dj-music-files-formats/
Hey there, I don't know if you knew that already. If you did - Welp I gave it a shot. If you don't want to convert files maybe you should look at metabliss.com to help lighten the load. I would definitely make a copy and try it on PC to see if the same issue occurs.

Web Template: Show full user name

I want to show the full name of the current user rather than just the logon id. SYUSER as a text element gives me the id but not the name.
Another alternative is to turn on the user name option in the Role Menu (we are using that on this particular template) but I don't want the "back button" to be shown next to the user name as it has a target of "_Top" and therefore jumps out of the frameset I am using.

Hi,
Please refer notes:
Employee Name Is Not Displayed On Self Service Pages as Expected (Doc ID 1364139.1)
Initials And Full Name Format Are Not Defaulted In Nl Self-Service (Doc ID 1295573.1)
Self Service Personal Information Not Showing Expected Name Format (Doc ID 1514040.1)
Self Service HR Search Results is Missing Name for Employees (Doc ID 1518390.1)
In addition, I suggest you to raise an SR in parallel if it is Production instance pertaining issue.
Thanks &
Best Regards,

Cisco IP Phone 7921 message "DHCP Timeout"

hi;
i have this message "DHCP Timeout"on the cisco 7921 and the phone block in "updating firmware".
can you help me
Thanks

Hi,
It was due to network reachability issues.
Try configuring the IP and TFTP address statically for the IP Phone
Thanks
GKN

Voice over Wireless with Cisco phones 7921 and 7925

Hello experts,
I made an wireless audit for a company.
They have 2 WLCs 5508 in HA mode, with APs 2602 for indoor and 1552. Version of the WLC : 7.6.120.0
At the end of the day we noticed that the roaming between indoor and outdoor access points is sometimes failing and results to a complete disconnection of the wireless phone (7921 or 7925) from the network. When people go from the indoor to the outdoor area, there is no problem. The problem comes when people are coming from the outdoor to the indoor.
Also, on the WLC, the power lvl of the outdoor APs are set to 1 ... Is it good or not ?
My question is, is there any known issue about Voice over wireless with WLC 5508-7.6.120.0 with APs 2602 and 1552 ?
Maybe it should be better to upgrade to 7.6.130.0 ?
Thanks in advance,
Alexis

Normally yes.
Is there a way to troubleshoot what's going on with the phones ? Maybe a "show client detail MAC address* on the WLC ?
Here are some logs when the phones are losing the network :
*Dot1x_NW_MsgTask_4: Apr 09 12:44:21.320: #DOT1X-3-INVALID_WPA_KEY_MSG_STATE: 1x_eapkey.c:957 Received invalid EAPOL-key M2 msg in START state - invalid secure bit; KeyLen 40, Key type 1, client 00:24:d7:83:56:dc
*apfMsConnTask_6: Apr 09 12:28:32.668: #APF-3-VALIDATE_CCKM_REASS_REQ_ELEMENT: apf_utils.c:2506 Could not validate the CCKM Reassociation request element.Received Timestamp deviation > 1sec in CCKM Info Element from mobile. Mobile:4c:00:82:85:6e:e1, AP:1
*Dot1x_NW_MsgTask_1: Apr 09 12:26:53.964: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 74:26:ac:63:8c:a9 - got 00 00 00 00 00 00 00 03, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_1: Apr 09 12:26:53.929: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 74:26:ac:63:8c:a9 - got 00 00 00 00 00 00 00 02, expected 00 00 00 00 00 00 00 04
*apfMsConnTask_4: Apr 09 12:24:34.959: #APF-3-VALIDATE_CCKM_REASS_REQ_ELEMENT: apf_utils.c:2506 Could not validate the CCKM Reassociation request element.Received Timestamp deviation > 1sec in CCKM Info Element from mobile. Mobile:78:da:6e:f6:5f:89, AP:5
*Dot1x_NW_MsgTask_0: Apr 09 12:22:30.217: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 4c:00:82:85:1d:68 - got 00 00 00 00 00 00 00 03, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_4: Apr 09 12:22:30.206: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 4c:00:82:85:b3:ac - got 00 00 00 00 00 00 00 03, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_4: Apr 09 12:22:30.186: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 4c:00:82:85:b3:ac - got 00 00 00 00 00 00 00 02, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_0: Apr 09 12:22:30.167: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 4c:00:82:85:1d:68 - got 00 00 00 00 00 00 00 02, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_6: Apr 09 12:22:29.672: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 78:da:6e:f6:14:2e - got 00 00 00 00 00 00 00 03, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_6: Apr 09 12:22:29.638: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 78:da:6e:f6:14:2e - got 00 00 00 00 00 00 00 02, expected 00 00 00 00 00 00 00 04
*apfMsConnTask_3: Apr 09 12:19:22.098: #APF-3-VALIDATE_CCKM_REASS_REQ_ELEMENT: apf_utils.c:2506 Could not validate the CCKM Reassociation request element.Received Timestamp deviation > 1sec in CCKM Info Element from mobile. Mobile:4c:00:82:85:6e:e1, AP:5
*osapiBsnTimer: Apr 09 12:13:36.031: #LOG-3-Q_IND: spam_lrad.c:53542 The system is unable to find WLAN 2 to be deleted

Cisco W-Phone 7925G WPA/WPA2

i am trying to configure WPA/WPA2 pre shared key security for the 7925G series wireless phones
and having wism module (4400) as a controller,
controller side i have configured security wpa with encryption tkip........... and wpa2 with aes
laptops connects normally but cisco wireless phone 7925G just show in security configuration
statis wep
leap
peap
eap-tls
etc etc etc
but not showing and wpa or wpa2 security typ
i have attached phone's firmware in attached
please see and give your feed back
that how i can make it work
thanks

Have you selected akm ?
Configuring the Pre-shared Key
When using Auto (AKM) with WPA Pre-shared key or WPA2 with Pre-shared key for authentication, you must configure a Passphrase/Pre-shared key in the Wireless Security Credentials area.
Pre-shared Key Formats
The Cisco Unified Wireless IP Phone 7925G supports ASCII and hexadecimal formats. You must use one of these formats when setting up a WPA Pre-shared key:
Hexadecimal
For hexadecimal keys, you must enter 64 hex digits (0-9 and/or A-F); for example, AB123456789CD01234567890EFAB123456789CD01234567890EF3456789C
ASCII
For ASCII keys, you must enter a character string that uses 0-9, A-Z (upper and lower case), including symbols and is from 8 to 63 characters in length; for example, GREG12356789ZXYW
To set up a Pre-shared key in the Wireless Credentials area, follow these steps:
Sent from Cisco Technical Support iPad App

L2 Roaming issue with Avaya wireless phone on WISM -V6.0.196.0

Hello Friends,
I am facing Layer2 roaming issue with Avaya Wirless phone 3620 which are configured WPA / Pre-shared key auth with a SSID1 and face a cut or delay in the voice.
But when i use Cisco Wireless phones and try to roam between one LWAP to other i dont face a cut or delay in the vocie which are
Configured with 802.1x +CCKM auth .
Then i configured new SSID 3 with 802.1x+CCKM settings for the new Avaya wireless module 3631 , but still face cut and delay while doing Layer 2 roaming.
While i was using these AP in WDS mode i never faced this Layer 2 roaming issue with Avaya wireless phones.
In current WISM all the LWAPs are supporting properly to the Cisco phone and Wirelss laptop clients.
I request you to please let me know how do i proceed further to solve the issue and please let me know if anybugs or incompatibilty for WISM with Avaya wireless phones.
Appreciate your response.
Regards,
KA.

Hello ,
Can any body please respond to my above Query.
Thanks,
KA.

How to show full name of user in crystal report

Hi. I am using Crystal Report 2008. I need to show full name (first name and last name) of the user logged in. Currently I am using "currentceusername" but it shows the user id that a user uses to login.
Is there any way to show the full name of the user in crystal report?
Thanks in advance.

Hello,
Not you H4... Can I suggest if someone replies to actually add something of value!!!!
Cr does not have the ability to query your AD Server. What you would have to do is use a AD query tool or Export Option and export the user info from the log on ID into a Excel or an Access table or something CR could report off of. Then you can add a subreport to get the name from the ID and insert it into the main report.
Check with your IT department, they should have tools to get the info. I'm not sure if there is a DB connector that would allow you to query the AD server directly but if there is one and it supports ODBC then you can use that as your subreport Data connection.
Typically names do not change that often so rather than running the Query every time the report is generated it would be better to export the info to a text type file and simply use it for your report. IT can put a rule on to export if the Names change.
Thank you
Don

Navigational Attribute Filter value selection not showing full name

Hi Experts,
We are having Navigational Attribute TM Responsible. We have created variable in BEX for it. When we are searching for value selection for this in RSRT, its showing only last name and key part. But If I dont pass any values, and display the result its showing full name. Please find the screen shots.
Customer needs full name to be available for selection in filter in above picture 1.
Please suggest what needs to be done.
Thanks,
Govind

Hi All,
The issue is resolved. Making display as Long text at Infoobject level and at Query display level was not working. Hence I tried to change the display at Multiprovider level as shown below. This fixed the issue.
Right click Navigational attribute -> Provider specific properties
Made the display as Long text.
This setting resolved the problem.
Thanks for help and replies.
Thanks,
Govind

Full folder names don't show.

In iOS, file/folder names are shortened when they cannot be displayed in one line. However, viewing a folder name within a folder still shows its shortened name. The expected result is that it should show its full, non-shortened name.
"Cloud File Managers" is the full name of the folder.
Hopefully this gets resolved.

Screen shot - http://oi43.tinypic.com/13ymcfo.jpg

Whenever i send a message to my wifes phone, it shows up her name instead of mine as well on FaceTime. how do i correct this?

Whenever i send a message to my wifes phone, it shows up her name and on facetime. How do i correct this?

Keyboard77 asked:
How do I record my keyboard's sounds?
http://www.bulletsandbones.com/GB/GBFAQ.html#recordkeyboardssounds
(Let the page FULLY load. The link to your answer is at the top of your screen)

Using Cisco wireless IP phones in Cisco Call Manager 5.1

Hello,
Currently we are using Cisco CallManager ver.5.1.2.3000-2, Berbee InformaCast ver.6.1.1 and Cisco Unity 1.1 Build 10. We like to replace few Cisco IP Phone 7961G-GE with Cisco Unified Wireless IP Phone 7920 ver.3.0. Does CCM ver. 5.1.2 supports Wireless phones? If it does, how do I configure it? Also, do I have to purchase any new license or other hardware?
Any suggestion / recommendations greatly appreciate.
Alex

Yes, it does:
Cisco Unified IP Phone Series 7900
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp51474
Config on CUCM itself is no different from any other phones neither other requirements like DLUs.
Of course you should already have APs for connectivity.
HTH
java
if this helps, please rate

Showing Full AP name in cisco Wireless phone 7921-site survey

Similar Messages

Maybe you are looking for