Showing Grey Colour on EWA session only for PI systems

Hi,
I have a strange issue when I try to generate EWA report for PI systems. For all other systems the reports are generated fine and in PI systems are exactly the same configurations as in other systems. I want to let you know that in PI systems in SDCCN there I have scheduled Sessions Refresh with target RFC destination SM_<SID>CLNT000_BACK (Solution Manager) and  Maintenance Package  with target RFC SM_<SID>CLNT000_BACK (Solution Manager). After Maintenance Package  is running this generate one session number being send to Solution Manager. I think the configurations in satellite systems are ok (PI systems), but in solution manager after I start to process the data I get one report generated with grey color and only two pages. Do you know which will be the reason? Also I checked note 727998, and this didnu2019t help me.
Thank you,
Kind regards,
Florin Radulea

>
Florin Radulea wrote:
> Hi Paul,
> Thank you for your response.
> I checked those notes but my problem is because these systems (PI systems) are not able to generate EWA reports for ABAP stacks. There is not needed to generate reports for JAVA stacks. I want first to generate reports for ABAP stacks. I mention that in SMSY I set PI systems as being as ABAP also.
> Can you also give me another advices?
> Thank you,
> Kind regards,
> Florin Radulea
Dear Florin
You might want to review the following note :
1322899    EWA incomplete after importing EHP/product incorrec
Regards
Amit

Similar Messages

  • Showing Grey Colour on EWA session

    Hi,
       When iam creating EWA i did all settings in satelite systems.after that in my solution manger its showing the before  EWA session showing grey colour(showing only 2 pages).in right side i cliked genrated word report its showing only 2 pages.what could be the reason for this.
    Thanku

    Hi David,
    We too in same race.
    As mentioned in note 762696, I found that EWA is scheduled for the same date to both of our Satelite System(DEV - System ID) as well as the Solution Manager System(SMD - System ID).
    So i manually actiavted the task of EWA(EarlyWatch Alert for Solution Manager) of SMD.
    But the log ends with more warnings. The same list of warnings we get at my Satelite System(DEV) also.
    CMO_NUMBERRANGES_CHECK : no matching interface found
    SMWM_READ_SMOFPARSFA : no matching interface found
    SMWM_PREPARE_SMOHSITEID : no matching interface found
    CRMCUE_TABSIZES_SMO : no matching interface found
    CRMCUE_QUEUES_MW : no matching interface found
    CRMCUE_ORDER01 : no matching interface found
    CRMCUE_DOWNLOAD_SMWMCOMM : no matching interface found
    CRMCUE_BDOC_IN_ERROR : no matching interface found
    SCAG_RFC_GET_USAGE_DATA : no matching interface found
    NON_CHAR_CIAP_IN_CHAR_TABLE : no matching interface found
    GET_CUSTOMIZING_INFO : no matching interface found
    EWA_GET_CPU_TIME : no matching interface found
    SYSTEM_INFO : no matching interface found
    GET_MEM_ALL : no matching interface found
    GET_FSYS_SINGLE : no matching interface found
    GET_CPU_ALL : no matching interface found
    FILL_SNAPSHOT_DATA : no matching interface found
    TH_SAPREL : no matching interface found
    TH_REQUEST_QUEUE : no matching interface found
    STNL_TST_SETLOCALE_FOR_ILANG : no matching interface found
    STNL_GET_TCP0C_FOR_ILANG : no matching interface found
    STNL_GET_ILANG : no matching interface found
    STNL_CHK_LOCALE_FOR_ILANG : no matching interface found
    STNL_CHK_ILANG_IN_CPNORM : no matching interface found
    STNL_CHK_CPNORM_FOR_ILANG : no matching interface found
    SAPWL_WORKLOAD_GET_SUMMARY_I_X : no matching interface found
    SAPWL_WORKLOAD_GET_SUMMARY_I_W : no matching interface found
    SAPWL_WORKLOAD_GET_STATIST_I_W : no matching interface found
    SAPWL_TCODE_AGGREGATION_I_U_W : no matching interface found
    SAPWL_TCODE_AGGREGATION_I_T_W : no matching interface found
    SAPWL_TCODE_AGGREGATION_I_M_W : no matching interface found
    SAPTUNE_HISTORY_DIRECTORY : no matching interface found
    SAPTUNE_GET_SUMMARY_STATISTIC : no matching interface found
    PROFILE_FROM_PAHI/S : no matching interface found
    EW_TH_WPINFO : no matching interface found
    SL_RFC_SE06 : no matching interface found
    EWA_TMS_GET_MOD_OBJECTS : no matching interface found
    SALR_MON_GET_J2EE : no matching interface found
    GET_TAB_TBE11 : no matching interface found
    MEC_COUNTRY_VERSION : no matching interface found
    TH_SERVER_LIST : no matching interface found
    SYSTEM_SWITCH_GET : no matching interface found
    STNL_TST_DBMS_CHARACTERSET : no matching interface found
    STNL_GET_TCPDB : no matching interface found
    STNL_GET_TCP0D : no matching interface found
    STNL_GET_LANG_DATA_STATUS : no matching interface found
    STNL_CHK_OUTPUT_DEVICES : no matching interface found
    SL_RFC_GET_CLIENT_REMOTE_3X : no matching interface found
    SEWA_GET_WP_DATA : no matching interface found
    SEWA_GET_UPDATE_ERRORS : no matching interface found
    SEWA_GET_COLLECTOR_PROTOCOLS : no matching interface found
    SEWA_GET_ABAP_DUMPS : no matching interface found
    SCUI_GET_NORMAL_OP_MODES : no matching interface found
    SCUI_GET_BATCH_INPUT_INFO : no matching interface found
    SCUI_GET_ARCHIVE_INFO : no matching interface found
    SALR_MON_GET_EWA_SERVER : no matching interface found
    SALR_MON_GET_EWA_ITS : no matching interface found
    RSFEC_DATA_READ : no matching interface found
    RSDDCVER_RFC_BW_WHM_STAT : no matching interface found
    RSDDCVER_RFC_BW_STATISTICS_2 : no matching interface found
    RSDDCVER_RFC_BW_STATISTICS : no matching interface found
    RSDDCVER_RFC_BW_AGGR_STAT : no matching interface found
    RSDDCVER_AGGREGATES : no matching interface found
    OCS_GET_INFO : no matching interface found
    IS_UNICODE_SYSTEM : no matching interface found
    EW_DLD_NOTES_INFO : no matching interface found
    CMO_ANALYZE_JOBS : no matching interface found
    > GET_ORA_SYS_TABLE_DBA_SEGMENTS : # of imp params in funcmod > # of imp params in mod 000111
    > GET_ORA_SYS_TABLE_DBA_SEGMENTS : inconsistency in # of imp params found for mod 000111
    > GET_ORA_SYS_TABLE_V_BUFF_STATS : # of imp params in funcmod > # of imp params in mod 000110
    > GET_ORA_SYS_TABLE_V_BUFF_STATS : inconsistency in # of imp params found for mod 000110
    > GET_ORA_SYS_TABLE_DBA_TABLES : # of imp params in funcmod > # of imp params in mod 000068
    > GET_ORA_SYS_TABLE_DBA_TABLES : inconsistency in # of imp params found for mod 000068
    > GET_ORA_SYS_TABLE_DBA_FEATURE : # of imp params in funcmod > # of imp params in mod 000096
    > GET_ORA_SYS_TABLE_DBA_FEATURE : inconsistency in # of imp params found for mod 000096
    > GET_ORA_SYS_TABLE_V_NLS_PARAM : # of imp params in funcmod > # of imp params in mod 001186
    > GET_ORA_SYS_TABLE_V_NLS_PARAM : inconsistency in # of imp params found for mod 001186
    > GET_ORA_SYS_TABLE_DBA_REGISTRY : # of imp params in funcmod > # of imp params in mod 001200
    > GET_ORA_SYS_TABLE_DBA_REGISTRY : inconsistency in # of imp params found for mod 001200
    > GET_ORA_SYS_TABLE_DBA_SEQUENCE : # of imp params in funcmod > # of imp params in mod 000095
    > GET_ORA_SYS_TABLE_DBA_SEQUENCE : inconsistency in # of imp params found for mod 000095
    > GET_ORA_SYS_TABLE_DBA_SCHED : # of imp params in funcmod > # of imp params in mod 000093
    > GET_ORA_SYS_TABLE_DBA_SCHED : inconsistency in # of imp params found for mod 000093
    GET_DB_ORA_TAB_GROWTH_BW : no matching interface found
    GET_DB_ORA_V_SQL_INFO2 : no matching interface found
    GET_ORA_SYS_TABLE_V_SPPARA : no matching interface found
    STUO_GET_WAIT_EVENTS : no matching interface found
    STUO_GET_ORA_SYS_TABLE/V$DATAB : no matching interface found
    STUO_GET_ENVIRONMENT : no matching interface found
    GET_ORA_SYS_TABLE_V_STATNAME : no matching interface found
    GET_ORA_SYS_TABLE_V_SESSTAT : no matching interface found
    GET_ORA_SYS_TABLE_V_ROLLSTAT : no matching interface found
    GET_ORA_SYS_TABLE_V_PROCESS : no matching interface found
    GET_ORA_SYS_TABLE_V_PARAMETER : no matching interface found
    GET_ORA_SYS_TABLE_V_LOGHIST : no matching interface found
    GET_ORA_SYS_TABLE_V_LOGFILE : no matching interface found
    GET_ORA_SYS_TABLE_V_LOG : no matching interface found
    GET_ORA_SYS_TABLE_V_LATCH : no matching interface found
    GET_ORA_SYS_TABLE_V_DATABASE : no matching interface found
    GET_ORA_SYS_TABLE_V_ARCHIVELOG : no matching interface found
    GET_ORA_SYS_TABLE_DBA_USERS : no matching interface found
    GET_ORA_SYS_TABLE_DBA_TBLSPACE : no matching interface found
    GET_ORA_SYS_TABLE_DBA_DATA_FIL : no matching interface found
    GET_DB_ORA_TABLES_GROWTH : no matching interface found
    GET_DB16_INFO : no matching interface found
    GET_DB14_INFO : no matching interface found
    GET_DB12_INFO : no matching interface found
    DB_ORA_MISSING_INDICES : no matching interface found
    DB_ORA_MAIN_LIST : no matching interface found
    DB_ORA_GET_RELEASE : no matching interface found
    DB_ORA_FILESYSTEM_REQUESTS : no matching interface found
    DB_ORA_EXTENTS : no matching interface found
    DB_ORA_CURRENT_SIZES : no matching interface found
    DB_ORA_CRIT_OBJ___FREESPC_STAT : no matching interface found
    PROFILE_FROM_PAHI/D : no matching interface found
    Do you have any idea why these warnings.
    Please help us to get rid of this issue.
    Regards,
    Sanjai

  • EWA alert report for java system shows wrong data

    Hi,
    In our solman system, EWA alert reports are configured every week for all the production systems (both ABAP and JAVA). Recently oracle database was upgraded from 10g to 11g in all the production systems. The EWA alert report for ABAP systems is correctly taking the 11g database details and is suggesting parameter changes. Unforunately the EWA alert report for Java systems is still pointing to 10g database and is suggesting the parameter changes for 10g only but the systems are on 11g.
    In SMSY, the database of the java systems is maintained as 11g only and not 10g. STill we are not sure where the data is being fetched from.
    Please help me in finding the issue.
    Regards,
    Ragav

    Hello,
    iNote 1482818 would be iapplicable if not java checks are being made. You are not reporting no java checks, you are reportijng the check is being performed, but has the wrong value. When you updated the database dis you perform Solman_setup, Mnaaged system setup?
    The reason I ask s that is what prepares the java side for EWA. For isntance if you had on old version of ST-SER such as 700_2008_2 then it does not know about Oracle 11.2....but that is on the ABAP side, you would need ST-SEr 701_2010_1 to
    recognize ORacle 11.2 on the ABAP side.
    So while I am not 100% sure in this specific instance, it seems logical that if the Java side isn't recognizing the Oracle Database version ( which means it is making this check) then you may need to run the Solman_setup, Mnaged system setup to pick up the ability to detect a new version of Oracel on the Java side.
    It is certainly worth the try.
    Regards,
    Paul

  • Hi, I have apple account/password on laptop but can't use the same ID etc on new Ipad.  On my account it says ID is only for 1 system.  I really want only one ID for both Ipad and laptop. Thanks

    Hi,
    I have apple account/password on laptop but can't use the same ID etc on new Ipad.  On my account it says ID is only for 1 system.  I really want only one ID for both Ipad and laptop.
    Thanks

    It seems that you have used the AppleIDs to "Purchase" your devices, which marries the two for all time and eternity.
    For info - Using your Apple ID for Apple services
    For Account security issues - Apple ID: Contacting Apple for help with Apple ID account security
    regards
    CCC

  • Support message and change requests only for production system

    Hi guys,
    I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
    In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
    In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
    Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
    Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
    Kind regards
    Rayko

    Hi Rayko,
    We do not have this option.
    Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
    I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
    Best Regards,
    Fernando

  • Restrict print out of Purchase order only for Production system

    Hi,
    I want to restrict print out of Purchase order only for Production system, don't want to take it in devep or quality.
    is there any identifier to find the system is production or development.
    can anyone tell me how to restrict it,
    is there any function module, not based on client system.
    Thanx in advance
    Kesav

    Hi Kesavarathinam Vaidyalingam ,
    yes, I also use thomas' suggestion using
    t000-cccategory = 'P'.
    to determine productive client.
    Just one small hint: I found this condition as true in a test system: The admin had done a system copy to create a fresh test client - but forgot (or did not see a good reason) to change t000-cccategory = 'P. to  t000-cccategory = 'T'.
    Regards,
    Clemens

  • Grey (blank) EWA reports generated for Portal systems

    I am attempting to set up EWA reports for J2EE systems. At this stage despite all efforts I continue to get grey rated (blank) reports generated for our Portal systems.
    As far as I can tell all required components are installed correctly (Wily, SMD server, SMD agents etc).
    This problem seems to be restricted to our Portal systems as report data is being generated for our XI J2EE engines with the same SMD components installed.
    CGA collection jobs are running successfully against the managed Portal systems, and I have attempted to manually generate reports via transaction DSA in the Solution Manager system, using an uploaded service data xml file generated with the SMD/services utility. This also results in a blank report.
    Our systems comprise the following components:
    Wily v7.1
    SMD 13 on Solution Manager and managed systems
    Solution Manager 4.0 SP13: (ABAP):
    SAP_ABA     700     0013     SAPKA70013
    SAP_BASIS     700     0013     SAPKB70013
    ST-PI  2005_1_700     0006     SAPKITLQI6
    PI_BASIS 2005_1_700     0013     SAPKIPYJ7D
    SAP_BW     700     0015     SAPKW70015
    SAP_AP     700     0009     SAPKNA7009
    BBPCRM     500     0009     SAPKU50009
    CPRXRPM     400     0010     SAPK-40010INCPRXRPM
    ST     400     0013     SAPKITL423
    BI_CONT     703     0008     SAPKIBIIP8
    ST-A/PI     01K_CRM560     0000          -
    ST-ICO     150_700     0011     SAPK-1507BINSTPL
    ST-SER     700_2006_2     0004     SAPKITLOK4
    Solution Manager (J2EE):
    sap.com     SAP_JTECHF     7.00 SP13 (1000.7.00.13.0.20070812015644)
    sap.com     ISAGENT     7.00 SP13 (1000.7.00.14.0.20070927052333)
    sap.com     SAP-JEE     7.00 SP13 (1000.7.00.13.0.20070812015311)
    sap.com     SAP-JEECOR     7.00 SP13 (1000.7.00.13.0.20070907082334)
    sap.com     BASETABLES     7.00 SP13 (1000.7.00.13.0.20070812013638)
    sap.com     CORE-TOOLS     7.00 SP13 (1000.7.00.13.0.20070812014121)
    sap.com     JLOGVIEW     7.00 SP13 (1000.7.00.13.0.20070812001600)
    sap.com     JSPM     7.00 SP13 (1000.7.00.13.0.20070812001700)
    sap.com     CAF     7.00 SP13 (1000.7.00.13.0.20070809092315)
    sap.com     UMEADMIN     7.00 SP13 (1000.7.00.13.0.20070809093947)
    sap.com     ADSSAP     7.00 SP13 (1000.7.00.13.0.20070812011854)
    sap.com     BI_MMR     7.00 SP13 (1000.7.00.13.0.20070812013749)
    sap.com     CAF-UM     7.00 SP13 (1000.7.00.13.0.20070809092324)
    sap.com     KM-KW_JIKS     7.00 SP13 (1000.7.00.13.0.20070812014519)
    sap.com     SAP_JTECHS     7.00 SP13 (1000.7.00.13.0.20070812015951)
    sap.com     BI_UDI     7.00 SP13 (1000.7.00.13.0.20070811190400)
    sap.com     LM-SERVICE     7.00 SP13 (1000.7.00.13.0.20070812001200)
    sap.com     LM-TOOLS     7.00 SP13 (1000.7.00.13.0.20070906104634)
    Among many, many others, the following notes and documentation has been followed:
    976054 Availability of EWA for Non ABAP components
    1010428 End-to-End Diagnostics
    762969 - Grey rating for Earywatch Report
    EWA guide for NON-ABAB components
    SAP Solution Manager 4.0 End-to-End Root Cause Analysis Installation Guide
    762969 - Grey rating for Earywatch Report
    And of course all the Wily & SMD installation guides.
    Please let me know if there is any other information required. I'm posting this in the hopes that someone else has had this problem and has been able to resolve it. I have read though what seems like hundreds of threads on SMD setup problems, however not many that describe the problem I'm having exactly.
    Many thanks in advace.
    Tim

    Hi Stephan,
    You're on the right track! When I try manually generate reports for our XI systems via uploaded service data, I only get valid report data if I generate report with graphics - otherwise the report is blank.
    Alas with the Portal systems, I get no report data either way.
    The XML storage table does contain data (with XI & Portal systems) - so comms with the J2EE is working.
    Thanks for your help.
    Tim

  • All buttons in all files are now showing error: Mouse events are permitted only for button instances.

    Somebody please help:
    I've taught myself enough with Flash to customize a
    fully-Flash template for my wife's website, and two of the buttons
    didn't do what I wanted them to in Actionscript. They then began
    giving me the message:
    **Error** Symbol=sub_butt1, layer=Layer 4, frame=1:Line 1:
    Mouse events are permitted only for button instances
    on (rollOver) {
    **Error** Symbol=sub_butt1, layer=Layer 4, frame=1:Line 4:
    Mouse events are permitted only for button instances
    on (releaseOutside, rollOut) {
    Total ActionScript Errors: 2 Reported Errors: 2
    Not only do I not know how to fix this, the same message
    comes up for every single button in the entire fla I had saved,
    plus earlier versions where I hadn't even messed with the buttons
    yet.
    Any suggestions?

    Hello Corbett,
    The error is saying that you are trying to apply a button
    action to something
    other than a button. Often this happens when you select the
    frame that the
    button is on instead of the actual button, thus applying the
    action to the
    frame instead of the button.
    Make sure you select the button on the stage and then apply
    the actions there.
    You'll probably have to remove the action from the frame
    before it will work
    (looks like it's on Layer 4 frame 1).
    Good luck!
    Jesse H.
    Adobe Community Expert
    My site:
    http://www.jharding.com
    Free Blog Radio:
    http://www.tornadostream.com
    > Somebody please help:
    > I've taught myself enough with Flash to customize a
    fully-Flash
    > template for
    > my wife's website, and two of the buttons didn't do what
    I wanted them
    > to in
    > Actionscript. They then began giving me the message:
    >
    > **Error** Symbol=sub_butt1, layer=Layer 4, frame=1:Line
    1: Mouse
    > events are
    > permitted only for button instances
    > on (rollOver) {
    > **Error** Symbol=sub_butt1, layer=Layer 4, frame=1:Line
    4: Mouse
    > events are
    > permitted only for button instances
    > on (releaseOutside, rollOut) {
    > Total ActionScript Errors: 2 Reported Errors: 2
    >
    > Not only do I not know how to fix this, the same message
    comes up for
    > every
    > single button in the entire fla I had saved, plus
    earlier versions
    > where I
    > hadn't even messed with the buttons yet.
    > Any suggestions?

  • Not find EWA Session in the managed system

    Hi all,
    I am configuring SOL 7.1 for EWA.
    I have configured SDCCN both on Solution manager 7.1 and Managed System.
    In the solution manager, i can find EWA session for managed system.
    The question is : When i run "Refresh sessions" on the T-code: SDCCN of Managed system, it can not retrive EWA session where exist on the Solution manager.
    How do i do? Can someone help, please.
    BR
    Wu

    after reconfiguration in new client,
    Follow Note 727998 - Complete Replacement of Service Definitions for SDCC/SDCCN
    step 1 :
    in the solution manager:
    1.1 run report  BDL_DELETE_ALL_TABLES in SE38
    1.2 SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
           Ensure that connection 'NONE' and SDCC_OSS is maintained, and that the 'master'
    1.3 Execute a "service definition refresh" in SDCCN
    1.4 Delete any task 'Maintenance Package' in the 'To do' tab in SDCCN.
    1.5 Create a new periodic task 'Maintenance Package' in SDCCN
    1.6 Call function module /BDL/_GENERATE_LOGFUNCINCLUDES in SE37
            Assign the value 'ALL' to the import parameter 'OPTION' (keep the default values for all other parameters) and execute the module.
    1.7 Execute "refresh session" in SDCCN
    step 2:
    in the managed system:
    1.1 run report  BDL_DELETE_ALL_TABLES in SE38
    1.2 SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
           Ensure that only connection SM_<SOL>_BACK' (delete SDCC_OSS )is maintained, and that the 'master'
    1.3 Execute a "service definition refresh" in SDCCN
    1.4 Delete any task 'Maintenance Package' in the 'To do' tab in SDCCN.
    1.5 Create a new periodic task 'Maintenance Package' in SDCCN
    1.6 Call function module /BDL/_GENERATE_LOGFUNCINCLUDES in SE37
            Assign the value 'ALL' to the import parameter 'OPTION' (keep the default values for all other parameters) and execute the module.
    1.7 Execute "refresh session" in SDCCN
    Best Regards,
    Wu

  • BI Admin Cockpit - only for myself system(BI)...?

    Dear Gurus,
    We are implementing BI admin cockpit in our BI system.
            u2022  When we are installing BI content two datasources, transformations, Info Packages has been installed for every cube -one for myself system(BI) and another one is for ECC source system.
    u2022     As per the SAP Note 934848 it clearly tells it is for only myself system, then why SAP provides standard datasources for ECC system.
    Please let us know whether we have to load data for only myself system OR for both the system I have to load data?
    Regards,
    Kiran A
    Edited by: Kiran A on May 19, 2010 10:13 AM

    Dear Mrityunjay,
    We are unable to find the job in SM37 in ECC system.
    Please let us know whether we have to load data from ECC for the bellow mentioned infocubes are not?
    0TCT_C23     InfoPackage Statistics
    0TCT_C22     DTP Statistics
    0TCT_C21     Process Statistics
    0TCT_C03     Data Manager Statistics (Details)
    0TCT_C02     Front-End and OLAP Statistics (Details)
    0TCT_C01     Front-End and OLAP Statistics (Aggregated)
    Thanks for your support and co-operation.
    Regards,
    Kiran A

  • What do I do if i'm not able to update my apps? Everytime I try a message shows up saying this account is only for the U.S. store and to switch it to Canada, but I live in Canada! Not sure for how it got changed :s

    I need help!

    From the massage it appears that your Apple ID/iTunes account is associated with the USA. It is associated by the address and the payment method. For a credit card the billing address is what is used. Also, yo can only use a Gift Card in the country's store in which the card was purchased.. For example. A card purchased in the USA can't be used in the Canadian store.

  • DB13c Error:ORA-12541: TNS:no listener for windows systems

    Hello Gurus,
    We are facing an issue in DB13C jobs.
    Background:
    DB13c is setup in Solution Manager.
    Only for windows systems DB13 jobs are failing.
    Job log is given below:
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000002249, user ID P96ADM)
    Execute logical command BRCONNECT On host 10.91.26.117
    Parameters:-u / -jid CHECK20120116070805 -sid T72 -j P96 -c -f check
    BR0801I BRCONNECT 7.10 (20)
    BR0280I BRCONNECT time stamp: 2012-01-16 07.08.09
    BR0301W SQL error -12541 at location BrDbConnect-15, SQL statement:
    'CONNECT / AT JOURNAL_DB USING P96'
    ORA-12541: TNS:no listener
    BR0310W Connect to database instance P96 failed
    BR0477I Oracle pfile /oracle/T72/102_64/dbs/initT72001.ora created from spfile /oracle/T72/102_64/dbs/spfileT72001.ora
    BR0805I Start of BRCONNECT processing: cehrfhfs.chk 2012-01-16 07.08.08
    BR0484I BRCONNECT log file: /oracle/T72/sapcheck/cehrfhfs.chk
    BR0280I BRCONNECT time stamp: 2012-01-16 07.08.09
    BR0301E SQL error -12541 at location db_connect-7, SQL statement:
    'CONNECT / AT JOURNAL_DB USING P96'
    ORA-12541: TNS:no listener
    BR0310E Connect to database instance P96 failed
    BR0280I BRCONNECT time stamp: 2012-01-16 07.08.09
    BR0301W SQL error -3114 at location brc_dblog_open-3, SQL statement:
    '/* AT JOURNAL_DB */ INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20120116070808', 'chk', 'T72
    ORA-03114: not connected to ORACLE
    BR0324W Insertion of database log header failed
    BR0806I End of BRCONNECT processing: cehrfhfs.chk2012-01-16 07.08.09
    BR0280I BRCONNECT time stamp: 2012-01-16 07.08.09
    BR0804I BRCONNECT terminated with errors
    External program terminated with exit code 3
    Internal session terminated with a runtime error (see ST22)
    Job cancelled
    P96 is our solman(version:SAP EHP 1 for SAP Solution Manager 7.0)
    T72 is 4.6c System .
    Sap in windows
    Database in Linux
    Oracle -10.2.0.4
    rest all DB13 jobs are running fine.
    Only for windows system we are facing issue now.
    Runtime Error which comes along with it is:
    OBJECTS_OBJREF_NOT_ASSIGNED
    Access via 'NULL' object reference not possible.
    The current ABAP program "RSDBAJOB" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    lsnrctl status for t72 instance is giving result for another instance(A72 which is teh Acceptance system for T72)
    orat72 51> lsnrctl status
    LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 16-JAN-2012 07:27:53
    Copyright (c) 1991, 2007, Oracle.  All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias                     LISTENER_A72_ES1UL0017
    Version                   TNSLSNR for Linux: Version 10.2.0.4.0 - Production
    Start Date                27-DEC-2011 14:53:43
    Uptime                    19 days 16 hr. 34 min. 9 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   /oracle/A72/102_64/network/admin/listener.ora
    Listener Log File         /oracle/A72/102_64/network/log/listener_a72_es1ul0017.log
    Kindly provide your valuable suggestions.
    Regards,
    Samaya

    Hello Nicholas,
    Thank you for your suggestion.
    But  i do not think it is really required to change P96 tnsnames.ora.
    Because, T72 database is in a  Linnux box where several other DB are also there.
    (Our landscape,NOn-PRD DB instances are together in 1 linux box)
    DB13 jobs of other instances are working fine.
    Only difference is T72 sap instace is a windows server where as other instances are in AIX.
    In DB13c, windows system is configured as without ABAP server .
                     UNIX systems as With ABAP server.
    All were working with this configuration till few days ago.
    Thank you.

  • EWA & IT Reporting on MDM System

    Hi,
    We are configuring our MDM System in System Monitoring.
    Is that possible to configure EWA & IT Reporting for MDM Systems in Solution Manager System Monitoring.?
    Pls Advise
    Thanks
    Arun

    Hello
    Please to be clear, EWA for MDM is possible however only the Standard JAVA checks can be made.
    There are no MDM checks for EWA. There maybe MDM checks in the future.
    So 1) Yes EWA can be generated on an MDM system with SDM installed
         2) The EWA will be a standard Java system EWA and will have no MDM specific checks.
    Hope this makes everyhting clear.
    Regards,
    Paul

  • Why is Disk Utility "Permissions" only enabled on system drive?

    Hi,
    Shouldn't Disk Utility's "Verify Permissions" and "Fix Permissions" be enabled for all mounted volumes? Including disk images? Same with "Verify Disk" and "Repair Disk".
    I'm seeing them enabled only for the system drive.
    Thank you,
    Don

    Shouldn't Disk Utility's "Verify Permissions" and "Fix Permissions" be enabled for all mounted volumes? Including disk images?
    When Apple (and some third-party) software is installed, data is written in the Receipts folder incuding file permissions. Disk Utility uses this information to verify and repair permissions. There is no such information for other files or drives.
    Same with "Verify Disk" and "Repair Disk".
    They should work for other drives.
    I'm seeing them enabled only for the system drive.
    Are you using an administrator account?

  • Getting EWA report But in Grey Colour

    Hi,
       Iam getting EWA with all details of my solution manager,But my doubt is In my before EWA session its showing with grey colour.Is it iam getting report correctly or not.or is it any problem of getting report or i have to change any settings for to get report in yellow.clarify the same.
    Thanku

    Hi,
    have you checked note 762696 "Grey rating for Earlywatch Alert"? Did you see any errors in the SDCCN data collection log in the satellite system?
    best regards,
    -David.

Maybe you are looking for