Showing. I RESET. Works, but doing this every day...does not seem right. What am I doing wrong?.

Classic iPod in Dock, suddenly stops playing. Fully charged, blue play button showing. I RESET. Works, but doing this every day...does not seem right. What am I doing wrong?

No problem, sometime the iPod need a Reset to clear the overflowing cache.
So it's good to Reset once a week or after you recharge it.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Have a nice day!

Similar Messages

I have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

i have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

Use a alias, but you might have to use a zip code that matches the location used.
Also if you click the right button there is a way to bypass the registration, like register later or something, Apple has it hidden. Also to bypass the internet connection to send the registration off.
Never place your name on a Mac or PC, it's spread throughout the entire machine, in emails, on the network in plain sight etc.

USB Drives works, but does not show up in "Safely Remove Hardware"

USB Drives works, but does not show up in "Safely Remove Hardware"
windows 8
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank you

Hello Mickey2003
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

H800-30ea,USB Drives works, but does not show up in "Safely Remove Hardware"

hi
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank you

Hello takpesar,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
P

Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

My buttons and screen work, but I can't activate the screen to see what I'm doing. Any idea what is wrong?

My buttons and screen work, but I can't activate the screen to see what I'm doing. This is after water damage. Any idea what is wrong? I'm not sure what to fix..
I know the screen works because when it first turned on I saw the apple logo and then the screen. If I hold the home and power button, I see the apple logo when it resets. Then it goes blank again.
I can hear when I get a call and pick up, and I can stop the sound and/or decline the call with the power button and side buttons. It also still vibrates. I'm confused - if the screen works, the buttons work, it vibrates, makes sound, and the touchscreen feature also works... what is wrong for me to fix? Why can't I see anything?!
I appreciate any help anybody has to offer!!!

I apologize for the confusion. This was literally the only option on Apple's "Contact Us" section that I was able to access. I assumed that Apple's clear intent to have me go here instead of speaking with someone in live time, and the fact this is on the Apple website, meant I could get some advice... Both over the phone and online they require information I need to see my screen to provide so those are not options. I tried to bypass this when calling through Skype. Some lady who didn't know what was going on, who I waited a good while to speak with, put me on hold; I gave up after 30minutes of waiting to speak to somebody again.
I've stumbled upon a few tricks to help me get through this problem, but I'm at a loss. I need this phone to work until late December. I need more tricks. So yes, it's worth understanding. Knowing what is going on will let me Google it and work with it, if nobody here is willing to help...
And yes, it IS a glitchy phone. It has been a glitchy phone for a long time. Long before this. But completely unrelated issues. I was assuming this wasn't just a glitch but something maybe somebody could help me understand.

My camera is working but does not work on skype how do I turn the camera on for Skype

My camer is working but does not work on skype how do I turn the camera on.

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

I can not get into my adobe photoshop elements. It shows it is working but photos never show.

My photshop elements program never loads. It shows it is working but no photos ever show up.

Does the app window show up on launch? Is it Organizer or Editor you are facing the issue with?
Thanks
Andaleeb

10.9.4 Mail activity shows incoming mail downloading but does not put in mailbox

Been testing all day with no results.
The hosting company says there is no problem at there end. All mail can be found the their webMail.
iMac Mail connection doctors show all good connections.
Mail activity shows incoming mail downloading but does not put in mailbox, they simply disappear.
Still searching for a fix for this serious issue.
Any ideas or a proven solution is most welcome.
-Thanks in Advance -

Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
and/or
Try re-indexing the mailboxes. This can take awhile if you have a lot of mail.
Reindex messages

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

My ipod shows up in itunes, but does not show up on my pc as a drive

my ipod show up in itunes - but does not show up on my pc as a drive
cannot figure out why it now doesn't show up

Maybe
iOS: Unable to import photos to computer
Did it show before?
If you connect to another PC does the iPod show up in My Computer?
Have you installed only camera or scanner programs on your computer?

I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

what is your question/issue here? did the folder have any content in it to begin with? screen shots of what you may be seeing?
if english isn't your native language, write it in what you are most comfortable speaking in to describe your issue.

Just bought a new macbook air. speakers show that they work but can't hear Skype or youtube. Can you help?

Hi , just bought a new macbook air. speakers show that they work but can't hear Skype or youtube. Can you help?

Have you checked that they are selected in System Preferences>Sound>Output tab?
If that doesn't help, and although I've never had to use it myself, I've read on here occasionally that launching Audio MIDI Setup in the Utilities folder and messing with the settings in there can sometimes sort out audio problems.

Followed instructions but cannot change PDF to word - Showing doc has virus but does not

Followed instructions but cannot change PDF to word - Showing doc has virus but does not

Acrobat does not perform any virus checks. So, it appears that you are using one of Adobe's online subscription services.
Use the link below to go to the Adobe Document Solutions page. Select the service you've subscribed to.
Log in. Locate and use the "support" link. "Chat" is offered to service subscribers.
Discussion of your issue with the service's support ought to see you through the issue.
Be well...

Showing. I RESET. Works, but doing this every day...does not seem right. What am I doing wrong?.

Similar Messages

Maybe you are looking for