Showing JBOException in a diferent way than af:messages.

Hi!
I ma developing an ADF-JSF Aplication, using ADF BC.
The standard way to show errors has the inconvenient of the reduction of space in the JSP Page.
For that reason, we are looking to show JBOExceptions in another way of af:messages:
For example, showing:
-JavaScript alerts.
-Pop Page.
Anyone could guide me in this process?

Okay, so I emailed Nokia about this and this is what they had to say. The key is what they say in the last few lines of the email:
Dear James,
Thank you for contacting the Nokia Careline.
We apologise for the inconvenience this has caused you.
Please make sure that you are using the latest PC Suite version available. You can download the latest PC Suite from the link below:
http://www.nokia.com.au/support/download-software/nokia-pc-suite/download#
You can export SMS Messages from your phone to your PC using Nokia PC Suite and store them in a .csv file, please do the following:
1. Connect your Nokia Device to your computer.
2. Open the Nokia Phone Browser.
3. Select Your Nokia Device and then select Inbox.
4. Right click in the right hands side of the window.
5. Select "Export Messages"
6. Nokia PC Suite will prompt for a location to save the .csv file.
OR
1. Connect your Nokia Device to your computer.
2. Select Messages within Nokia PC Suite.
3. Select Inbox.
4. Right click in the right hands side of the window.
5. Select "Export Messages"
6. Nokia PC Suite will prompt for a location to save the .csv file.
Note that merging of SMS messages can occur due to extreme volume of SMS messages on your phone that you want to view or transfer using PC Suite.
Please feel free to write back to us if you need further assistance with this case. You may also contact one of our friendly Technical Support Executives at 0800 665 421 from 8am to 8pm, seven days a week. For online assistance, please visit ‘ASK Nokia’ at our website www.nokia.co.nz/asknokia
Regards,
Rom R.
E-mail Support Executive
Nokia Careline
I replied to the email asking if there is going to be a fix for the merging of messages, will keep you posted on the response .

Similar Messages

  • CLI/ASDM shows much more traffic on FWSM than via SNMP?

    Hi!
    I've noticed a strange behaviour of our FWSM (Release 3.1.3). When starting the ASDM or using CLI (show interface XY stats), both ways show the same amount of traffic. It's the same amount of traffic the 6513 router beyond also measures.
    But when i try to use SNMP on the OIDs ifOutOctets/ifInOctets, i get way too little traffic. Also the packet counter shows way too little packets than i get via CLI or the ASDM frontend.
    Is it a bug of the firmware or does the FSWM count the traffic and packets in a different way?
    Can someone please verify this?
    Thanks!

    Hi,
    Do you see any errors on ASA Eth0/1(to switch)?  Running the similar speed tests with wired and wifi? Client traffic on network is same as well?
    Thx
    MS

  • I lost my Iphone 4s and I need the iMei number to trace. THAT fellow actually off my phone at my last location.I dont have sim on that i phone.I am trying to trace the iphone through find my phone but it showing offline. Thus another way of solving w

    I lost my Iphone 4s and I need the iMei number to trace. THAT fellow actually off my phone at my last location.I dont have sim on that i phone.I am trying to trace the iphone through find my phone but it showing offline. Thus another way of solving will be through IMEI number which i need to hand it over to the police! How can i get the iMei number? Can I use Itune? As previously, I did sync into iTunes before. Will it have the record of my iMEI number? PLEASE HELP ME!
    iPhone 4S, iOS 7.0.1

    how to find IMEI, etc
    http://support.apple.com/kb/HT4061?viewlocale=en_US&locale=en_US

  • How to connect my iPad 2 to Sony Bavaria wirless? Any other way than apple tv?

    How to connect my iPad 2 to Sony Bavaria wirless? Any other way than apple tv?

    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter
    this one? if i connect it to the tv, will it work  if audio system is connected to the tv?

  • How can you get a compilation album to show up as one album rather than be split up but song and artist?

    how can you get a compilation album to show up as one album rather than be split up by song and artist? I've got loads of albums on iTunes that are compliations and they are all mixed up by track/ artist. Even when you click 'show album' it still just shows the album title and then the artist in alphabetical order - so the album is replicated several times
    Can anyone tell me how to amalgamate compliation albums please?

    This web page will help you: http://samsoft.org.uk/iTunes/grouping.asp

  • In iOS 4, you could make separate photo slide shows with separate songs.   In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.  Is there any way to fix this? This is something I

    In iOS 4, you could make separate photo slide shows with separate songs.
    In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
    Is there any way to fix this? This is something I use every day.
    I am on an iPad 2, 32gb, wifi...
    Thank you

    My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

  • HT1218 My airport utility no longer works, but I have just changed my router.  Is there something I need to do ?  The orange light shows up on my airport, rather than the green one it should have.  Please help !!!

    My airport utility no longer works, but I have just changed my router.  Is there something I need to do ?  The orange light shows up on my airport, rather than the green one it should have.  Please help !!!

    **** little info about your equipment.
    If you just replaced the router with an Airport Extreme or Express:
    disconnect the modem from power, disconnect the new router from power, connect the modem to power and wait till it os fully started up, then connect the new router to power. After a while the amber light will turn to flashing, then after a while it will turn to green. Then with AirportUtility (in Aplications/Utilities) it should be configured with the password.

  • When I'm in a call, I can hear beeping like I'm getting another call but the name doesn't show up and the only way I can see who called is if they leave a voicemail

    I have an employee who has an issue when on calls. When he is in a call with someone, he can hear another call beeping in but no name shows up. The only way he can see who called is if they leave a voicemail. He says the phone is up to date with software. Wondering if anyone can help me figure out what is going on.

    Morning katesnazzy,
    Thanks for using Apple Support Communities.
    There are different methods for enabling and using the following features, depending on your wireless carrier's network technology
    For more information on this, take a look at this article:
    iPhone: Understanding phone features
    http://support.apple.com/kb/HT4515
    Best of luck,
    Mario

  • I have 4 computers only, when iam going to authorize  it showing you can't aurourize more than 5 computers , i done everything as per itunes,like deaurthorize

    have 4 computers only, when iam going to authorize  it showing you can't aurourize more than 5 computers ,
    i done everything as per itunes,like deaurthorize,in my ac 7 every this in itubes help page

    Click on iTunes Store (top center of iTunes screen), then Account (under MUSIC LINKS on right of screen).  Enter your Apple ID and password.  On the next screen the last entry under Apple ID Summary should look like this:
    If you don't have access to some or all of your authorized computers you can click the Deauthorize All button, then reauthorize those that you're currently using.  I don't recall there being a scenario where Deauthorize All would not appear based on the number of authorized systems.

  • Run labview exe in other way than runtime engine?

    Hi guys
    This might be stupid question, but can I run labview's *.exe in other way than in the runtime engine? In these days in have done *exe and installer with runtime engine and give it to the end-user. It does not matter how tiny ur code is, user have to install 40 conponents and then restart computer... How annoying. Is there eny other way? Can i use other programming languages some how?
    -AA-

    If the runtime is only one out of 40 components, it should not make a big difference for you.
    I always tell my users to download and install the runtime engine directly from NI. This needs to be done only once per PC and per runtime version, at which point you can distribute a small installer.
    There is also an idea to simplify all this. Please support it.
    (It is not reasonable to be able to build an executable with embedded runtime, that would make a LabVIEW 2009 executable 100+MB in size. (We had that back in LabVIEW 4.0, where each 20kb VI turned into a 3+MB executable, which was significant in the days of 1GB drives.)
    Message Edited by altenbach on 12-16-2009 11:42 AM
    LabVIEW Champion . Do more with less code and in less time .

  • When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen show a blank screen with the heading accessing  iTunes. If I go to the right side and search the store the names drop down. Nothing happens

    When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen shows a blank screen with the heading "accessing  iTunes". If I go to the right side and search the store the "search names" drop down. Then nothing happens. My iTunes store account info is shown on the right side
    I am using a Dell Vostro 3400, with 8 GB RAM, Windows 7 64bit Ultimate OS. ITunes version 10.5? (Latest)
    What I have tried:
    Uninstalled iTunes,
    Removed firewall and protection.
    Re-installed iTunes 64bit (still get the same issue)
    Restarted firewall, added apple.com etc.
    I have created a new user profile to no vail.
    Still the same issue. I can access using my iPod 

    I am having the same problem ever since I upgraded.  Have received four emails from Apple support on the
    issue and nothing has worked.  Unloaded 10.5 and went back to 10.3 which worked fine but it would not allow
    me to sync my Iphone with the ios 5 upgrade.  Went back to 10.5 and sometimes get exactly what you do when
    I try an access the store.  It looks like something is clearly missing.  Have done just about everything I have seen
    on threads but nothing works.  Really need help.

  • I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and show the project on my TV than after 10 min. the music stops for a few seconds.

    I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and showing the project on my TV than: after 10 min. the music stops for a few seconds. On the screen of the DVD-player I can see that after the word 'play' the clock starts again with counting the time. I tried everything: * burning slow. * all programs stopped, except iDVD. * all other apparature uncoupled. Is this a problem of my iDVD-program or my LaCie burner?

    mishmumken is correct about the 99 slides.  There's an 99 chapter limit in each slideshow for DVDs and each photo is considered a chapter.  iDVD gets around that by renaming slide 100 back to 1 and goes on. 
    The pause can be minimized (but not eliminated) by burning to disk at the slowest speed available: usually 4x or 2x.  Save the project to disk (File ➙ Save to Disk menu option) and play the disk image with DVD player to check out the transition at 99 and 198.  Then burn the disk image to disk with Disk Utility at the slowest speed possible.  Also use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • My iCloud backup from my old phone shows incomplete is there a way to retrieve the data that I backup from my old phone even if it didn't complete . They told me that they would let if finish when I traded in my old phone. I want to restore it to new phon

    My iCloud backup from my old phone shows incomplete is there a way to retrieve the data that I backup from my old phone even if it didn't complete . They told me that they would let if finish when I traded in my old phone. I want to restore it to new phone. Even if it didn't complete how to I restore the 5 g that did backup

    Unfortunately you can't restore an incomplete backup.

  • HT204266 when try to update applications I get a msg showing the country of purchase different than my country

    when I try to update applications I get a msg showing the country of purchase different than my country, sometime it shows Canada, sometime USA sometime Egypt sometime Lebanon.
    not allowing to update applications
    This problem started showing since the last iOS update of phone ( iOS 6.1 )

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • HT5002 I used Inkscape on Linux before moved to Mac. Now I am trying to install it using MacPorts, but libpixman has some problems that has been reported out there. Does any one know how to fix it without the need to use other way than MacPorts?

    I used Inkscape on Linux before moved to Mac. Now I am trying to install it
    using MacPorts, but libpixman has some problems that has been reported out there.
    Does any one know how to fix it without the need to use other way than MacPorts?

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Look at this one for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

Maybe you are looking for