Showing messages as URGENT

I need to show some of my messages as URGENT for recipients all of whom are -- I regret to say -- using Microsoft Outlook, and some of whom need some extra prompting to take the 'Urgent'-marking seriously.
I should like simply to be able to mark the messages with a flag, but cannot find how to do that.
An alternative would be to show the text in the subject-line in red, bold, underlined, &c., but Mail will let me do that in the body of the message (where I have no use for such effects) but not in the subject-line, where I do need it.
Have I missed something ?

When you generate a new message look in the bottom right corner of the header area, beside the signature selector, and you will see an exclamation mark . This is a popup menu which allows you to set low, normal or high (=urgent) priority.
Setting the priority does not of course mean that the recipient will pay any attention to it. Mail marks incoming priority messages with !! in the flags field, but it is not very obvious. I use a rule to change the background colour of incoming priority messages to red.
AK

Similar Messages

  • Showing messages on the top as well as the bottom of the screen

    Hi all,
    In Webdynpro Java I have to show message at two positions on the screen. I am using Message Area UI Element for displaying the messages. I have used two Message Area UI Element one at the top and one at the bottom but the message is coming up on the top only. I need to display at the bottom also. Is there any way to provide this facility on the screen.
    This is really urgent.
    Thanxs in advance.
    Regards,
    Gurmat Bhatia

    Gurmat,
    I dont think, we have any direct approach for two message areas. But it can be done in other ways. Please have a look on these link.
    Choosing between multiple MessageArea-items
    How to make Messages appear on a specific View?
    How to send messages to differents MessageArea
    Regards,
    Sridhar

  • I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered

    I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered

    Hi waqaskhan91,
    Thank you for visiting Apple Support Communities.
    If you're not able to send text or iMessages to certain contacts after updating your iPhone, start with the troubleshooting tips in this article:
    iOS: Troubleshooting Messages - Apple Support
    If you only see this behavior with a few contacts, you may want to try these steps first:
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
    Best Regards,
    Jeremy

  • How to show messages in a little popup ?

    Hello,
    Im faced with an issue when I want to show messages in my little popup.
    The calling component is BT111H_OPPT.
    Whenever I want to show the message in my popup that the mandatory fields are not filled with information the systems only shows them on the view of BT111H_OPPT when I closed my popup.
    Ive implemented an own check method for that issue. See the following Code:
    IF me->check_mandatory_fields( 'CREATE' ) = abap_true.
        lr_window ?= me->view_manager->get_window_controller( ).
        lr_window->call_outbound_plug( 'CREATE' ).              "#EC NOTEXT
      ELSE.
        DATA: lr_service TYPE REF TO cl_bsp_wd_message_service.
        lr_service = me->view_manager->get_message_service( ).
    +   TESTED THAT CODE FIRST TIME, BUT NOTHING APPEARS ANYWHERE!!!!+*
    *    CALL METHOD me->messages->add_message
    *      EXPORTING
    *        condition = co_mandatory_field_empty
    *        message   = 'Test'
    **        otr_alias =
    *        severity  = cl_bsp_messages=>co_severity_error
    **        dummy     = me->component_id
    **        p1        =
    **        p2        =
    **        p3        =
    **        p4        =
    + SO I TRIED THAT ONE. NOW, THE MESSAGE APPEARS IN THE CALLING COMPONENT!+* 
    TRY.
            lr_service->add_message(
            iv_msg_type = 'W'
            iv_msg_id = 'ZICRM'
            iv_msg_number = '050'
            iv_msg_v1 = 'lv_text'
          CATCH cx_bsp_wd_dupl_mess_subscr.
        ENDTRY.
      ENDIF.
    THANK you for an answer...
    Regards,
    marcus

    Hi Marcus,
    try to use the following method as you create the popup in the calling view controller:
    <your popup ref>->set_display_mode( iv_mode = if_bsp_wd_popup=>c_display_mode_surrounded ).
    Best Regards,
    Michael
    Edited by: Michael Neumann on Feb 23, 2011 5:50 PM

  • In MD05 system show message "The MRP element no longer exist".

    Hi Guru,
    Need some help .
    In MD04 transaction contain Purchase order, when I double click purchase order,It will get open .  But when I open same purchase order in MD05 system show message u201CThe MRP element no longer exist".
    Please help me , if any know the solution or any input. Open purchase order in system.
    Regards
    PNU

    PNU,
    I don't believe this is the same Purchase order.
    Review closely order number/item number/schedule number.  I believe you will see that the old entry (MD05) no longer exists, and has been replaced with a similar item.
    Best Regards,
    DB49

  • Junk Mail folder refusing to show messages from a particular account

    So, I have a weird problem with Leopard Mail (3.2) - when I click on the junk mail folder, 99% of the time it won't show messages from my Yahoo POP account. The only way I can get messages from this account to show is by expanding the junk mail folder, clicking on a different sub-account, then clicking on my Yahoo account. This will show the messages in its junk folder, and if I click on the combined junk folder they will show up inside it. This will work until I click away from junk - say, to my inbox - at which point the procedure will need to be repeated if I wish to see my Yahoo junk mail.
    I've only noticed it very recently, but I'm not sure how long it's been going on. Unbelievably annoying. I deleted the junk folder, no luck. I toggled the account off/on - this seemed to work for a day, but the behaviour's back and I can't make this work again. I rebuilt the mailbox... Even deleted and added the account again, but it still did the same thing.
    Has anyone else experienced this? Is it just a bug in Leopard Mail? Something specifically with POP accounts, perhaps? (My 5 IMAP accounts seem fine). If anyone has any further suggestions I'd be really, really grateful.

    Ok, so, something in way of an update: Normal behaviour appears to be restored after Mail detects a piece of junk mail and puts it in the junk folder for this account (manual marking of junk doesn't do the trick). Then it works ok until I quit Mail.

  • Itunes will not launch, it shows  message of "itunes library .itl" can not be read because it was created by a newer version of itunes. I tried opene it in save mode but I had the same problem.

    Itunes will not launch, it shows  message of "itunes library .itl" can not be read because it was created by a newer version of itunes. I tried opene it in save mode but I had the same problem.

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • My iPad shows message that it needs to be backed up, but when connected to iTunes for backup it states all backed up. Cannot remove message by clicking ok.  Therefore iPad is locked up.  What can I do?

    My iPad shows message needs to be backed up.  When connected to iTunes it shows all backed up.  Cannot get rid of message by clicking ok.  IPad  therefore is frozen.  What to do?

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

  • I want to install Windows but Mac showed message that related partition should be in NTFS format. In which way I could format windows partition.

    I want to installWindows but Mac showed message that related partition should be in NTFS format.In which way I could format windows partition.

    Go back and re-read the guide which is also part of and in the Apple Boot Camp Assistant.
    Boot Camp Installation Guide
    Boot Camp FAQ
    Windows 7 FAQ
    Apple - Support - Boot Camp

  • HT4623 How to update software without wi-fi? It shows message that first connect to wi-fi then update even if I have 3G net on my phone i5.

    How to update software without wi-fi? It shows message that first connect to wi-fi then update even if I have 3G net on my phone i5.

    Hi Parmkshinde,
    Here's why you should use Wifi to do a wireless software update:
    While you'd be able to download an update over 3G/4G, the updates are so big that you'll be waiting a really long time (also, you'll eat up a ton of your monthly wireless data), so Wi-Fi is much easier here. You should also make sure you've got plenty of battery life. The download and installation process can take some time, so if you've got less then 50% battery, you may want to plug in to a power source.
    Hope this answers your question!
    Cheers,
    GB

  • I have done upgrade to 8.1.2. Now iPad a iPhone will will not connect to iTunes, iCloud or do updates on apps.Shows message "unable to connect" or "error in connecting"  as well as "unable to verify". How can this be sorted?

    I have done upgrade to 8.1.2. Now iPad a iPhone will will not connect to iTunes, iCloud or do updates on apps.Shows message "unable to connect" or "error in connecting"  as well as "unable to verify". How can this be sorted? Thanks

    Hi,
    Thanks.
    I have tried signing out and in, still does not work.
    Still just get the previously mentioned "messages".
    I wanted to restore, but then you have to turn off "find my ipad/iphone" but this is not allowed, as I cannot connect to the itunes/icloud or app store. The units work with current apps. EG; email etc, and with apps that do not require current updates.
    Thanks

  • Show messages from another component

    Hello,
    I have an application with several components, and I would like to know that I do to show messages from one component to another.
    Thank you

    Thank you for responding, the problem is that we show the messages in sigueinet way:
          CALL METHOD l_message_manager->report_t100_message
            EXPORTING
              msgid = ls_errores-id
              msgno = ls_errores-number
              msgty = ls_errores-type
              p1    = ls_errores-message_v1
              p2    = ls_errores-message_v2
              p3    = ls_errores-message_v3
              p4    = ls_errores-message_v4
              view  = 'ID_BODY'.
    The problem is that it shows us what the component in which we are, which is a POPUP, and we want to show in another component

  • Want to show message on JOptionPane in Gujarati or any language other than

    Hello All,
    I am developing one swing application and in that I need to show some message on JOptionPane in Gujarati Labguage.
    Now I want to know whether it is possible to show messages on JOptionPane in other than english language? if so, please let me know how can I achieve that?
    Thanks in Advance,
    Tapan Maru

    Hello Tapan,
    Java works with unicode (16 bit character size), and since Gujarati is defined in unicode, you can display Gujarati characters wherever you want in your programme, provided you have a corresponding font installed on your system.
    Regards
    J�rg

  • Bpel process to take input and show message

    Hii All,
    I want to desgin a BPEL process whic will take three input variable and show message "Your ticket is booked".
    Can anyone plz help me how to design it?
    Thanks and regards,
    Deekay.

    Hi,
    You have to modify the xsd of your project.
    For example, for your project BPELProcess1.jpr, modify the file BPELProcess1.xsd :
    <schema attributeFormDefault="unqualified"
         elementFormDefault="qualified"
         targetNamespace="http://xmlns.oracle.com/BPELProcess1"
         xmlns="http://www.w3.org/2001/XMLSchema">
         <element name="BPELProcess1ProcessRequest">
              <complexType>
                   <sequence>
                        <element name="input1" type="string"/>
                        <element name="input2" type="string"/>
                        <element name="input3" type="string"/>
                   </sequence>
              </complexType>
         </element>
         <element name="BPELProcess1ProcessResponse">
              <complexType>
                   <sequence>
                        <element name="result" type="string"/>
                   </sequence>
              </complexType>
         </element>
    </schema>
    Where do you want to show the message"Your ticket is booked" ?
    Romain.

  • LR4.1 - after publish photos to flickr, then show message of can't update this collection

    LR4.1 - after publish photos to flickr, then show message of can't update this collection. how to solve

    See this: http://feedback.photoshop.com/photoshop_family/topics/lr_4_1_rc_flickr_publishing_broken

Maybe you are looking for

  • How to delete content from old iPhone

    Hi. My problem is a bit complex, I would say. I have just bought a new iPhone and sold my old iPhone. When I was about to delete and reset all the stuff on my old, i couldn't because i couldn't remember my password for the restrictions in settings (e

  • My iPads speakers are making wierd noises

    the sound on my iPad has been acting weird, making a robotic and scratchy sound to every noise which comes out of my iPads built in speakers. It has been happening for a few months but sometimes it would work than a few days/weeks later it would go w

  • Rman hot backup

    hello i am using rman hot backup script to take backup database everyday but the problem is it is working but not deleting old backup older than 2 days . also i have question .. my database is in archive log mode and everyday about 6-7 .arch files ge

  • Oracle + Unix question , Error validation for SQL statements in co process

    Hi, If I use co process in a shell script , what is the best way to do the error validation of the execution of any sql statements . I was trying to change the following code to make use of co process concept. When I tried echo $? after the execution

  • Increase width of bars in svg chart

    I've created an svg bar chart which shows the number of actions grouped by department and status. Each department has about 4 bars. This works reasonably well but all the bars appear to the left hand side of the x-axis and are quite small in width. T