Showing Multiple Colors in a single Line series Chart

Hi there,
I need to show some High,Low and Normal datapoints with different colors on a single series chart
I have to use line series.
Can anyone help me with this, I not even sure if this is possible
Please throw some light
Thank you

For the first variant.
You have a LineSeries for all data.
You manually divide your dataProvider for three providers: with low, hi and norm values. And Create additional PlotSeries for each part and set coloror what you want. So line will be shown by LineSeries and point will be shown and colored by PlotSerieses. Very simple variant but if you need to change the low and hi limits It's not so good. But if this limits are static and data is static it's very good.
If data and limits are dinamic or you want to create more correct solution. It's not so difficult to create itemRenderer for LineSeries (there is a style property itemRenderer). Read about renderers in docs^ http://www.adobe.com/devnet/flex/quickstart/using_item_renderers/

Similar Messages

Can I add multiple elements on a single line?

Can I add multiple elements on a single line?

Not yet. But this is something we plan to support. You can vote on this idea here: http://forums.adobe.com/ideas/1046
We use this to help prioritize our work.
Randy

MessageTransformBean - SimplePlain2XML - Multiple records on a single line

Hi,
I am trying to convert multiple record from a single line to multipe rows in an XML message with the MessageTransformBean.
If the record look like this it's working:
RECORD1textETC
RECORD2textETC
But the incoming message are all on a single line:
RECORD1textETCRECORD2textETC
Is there a way to add a linefeed to my incoming message after X characters, or to tell the adapter to split by length instead of spliting on the end of line?
Thanks,
Martin

I had to code a custom Module Adapter to do it.
Here's the main part of the module adapter EOLConvertBean...
Message msg = (Message) inputModuleData.getPrincipalData();
XMLPayload xmlpayload = msg.getDocument();
byte[] content = xmlpayload.getContent();
byte crlf = 0x0A; // end of line char
int current = 0; // current bytes read
ByteArrayOutputStream baos = new ByteArrayOutputStream();
int lines = content.length / recordLen; // record len = insert EOL after X recordLen
// TODO change for do while for 1x line record
for (int i = 0; i <= lines; i++) {
     baos.write(content, current, recordLen);
     baos.write(crlf);
     current += recordLen;
xmlpayload.setContent(baos.toByteArray());
inputModuleData.setPrincipalData(msg);
Edited by: Martin Lavoie Rousseau on Oct 6, 2010 9:08 PM

How to show multiple messages for a single exception

hi
Please consider this example application created using JDeveloper 11.1.1.3.0
at http://www.consideringred.com/files/oracle/2010/MultipleMessagesExceptionApp-v0.01.zip
It has a class extending DCErrorHandlerImpl configured as ErrorHandlerClass in DataBindings.cpx .
Running the page and entering a value starting with "err" will result in an exception being thrown and multiple messages shown.
See the screencast at http://screencast.com/t/zOmEOzP4jmQ
To get multiple messages for a single exception the MyDCErrorHandler class is implemented like
public class MyDCErrorHandler
extends DCErrorHandlerImpl
public MyDCErrorHandler()
    super(true);
@Override
public void reportException(DCBindingContainer pDCBindingContainer,
    Exception pException)
    if (pException instanceof JboException)
      Throwable vCause = pException.getCause();
      if (vCause instanceof MyMultiMessageException)
        reportMyMultiMessageException(pDCBindingContainer,
          (MyMultiMessageException)vCause);
        return;
    super.reportException(pDCBindingContainer, pException);
public void reportMyMultiMessageException(DCBindingContainer pDCBindingContainer,
    MyMultiMessageException pException)
    String vMessage = pException.getMessage();
    reportException(pDCBindingContainer, new Exception(vMessage));
    List<String> vMessages = pException.getMessages();
    for (String vOneMessage : vMessages)
      reportException(pDCBindingContainer, new Exception(vOneMessage));
}I wonder if calling reportException() multiple times is really the way to go here?
question:
- (q1) What would be the preferred use of the DCErrorHandlerImpl API to show multiple messages for a single exception?
many thanks
Jan Vervecken

fyi
Looks like using MultipleMessagesExceptionApp-v0.01.zip in JDeveloper 11.1.1.2.0 (11.1.1.2.36.55.36) results in a different behaviour compared to when used in JDeveloper 11.1.1.3.0 (11.1.1.3.37.56.60)
see http://www.consideringred.com/files/oracle/img/2010/MultipleMessages-111130versus111120.png
When using JDeveloper 11.1.1.2.0 each exception seems to result in two messages where there is only one message (as intended/expected) per exception when using JDeveloper 11.1.1.3.0 .
(Could be somehow related to the question in forum thread "multiple callbacks to DCErrorHandlerImpl".)
But, question (q1) remains and is still about JDeveloper 11.1.1.3.0 .
regards
Jan

Measuring of Text with Multiple Fonts in One Single Line

I am following a request to write C++ code for a label that contains several text elements in one single line, varying by font, size, color.... Ok, that can be done easily in GDI+ by measuring each element's width and then execute a DrawString
for each of the text elements starting at its calculated position.
So far, I failed miserably.
The horizontal text positions did not appear to be correct. I reverted now to very simple text width measuring tests where the results are still puzzling.
Test 1 (GDI+): Use of MeasureString
With the same font, the width of the string "MM" does not match the double with of the string "M". This cannot be explained with eventual rounding problems.
Test 2 (GDI+): Use of MeasureCharacterRanges
Used the same font as for the first test. The width of "MM" is now exactly double of the width of "M". But: The width of the "M" ist lightyears away from the measurement result in the first test.
Test 3 (GDI): Use of GetCharABCWidthsFloat
Attempted to create a GDI font as close as possible to the GDI+ font in the previous tests. Unfortunately, this third test shows results which do not match the previous results at all.
I am appending the full example here; the results I found during the debug session have been added as comments:
void ApplWindow_TextDrawTest(HDC hDC)
Gdiplus::Graphics *G = new Gdiplus::Graphics(hDC);
G->SetTextRenderingHint(TextRenderingHint::TextRenderingHintClearTypeGridFit);
Gdiplus::StringFormat MyFormat;
MyFormat.SetAlignment(Gdiplus::StringAlignment::StringAlignmentNear);
MyFormat.SetFormatFlags(Gdiplus::StringFormatFlags::StringFormatFlagsNoWrap);
Gdiplus::Font TextFont(L"Calibri", 36, Gdiplus::FontStyle::FontStyleBold, Gdiplus::Unit::UnitPixel);
const wchar_t *Text1M = L"M";
Gdiplus::PointF TextOrigin1M(0, 0);
Gdiplus::RectF TextBounds1M;
const wchar_t *Text2M = L"MM";
Gdiplus::PointF TextOrigin2M(0, 50);
Gdiplus::RectF TextBounds2M;
//--- Test #1: using MeasureString ----------
G->MeasureString(Text1M, (INT)wcslen(Text1M), &TextFont, TextOrigin1M, &MyFormat, &TextBounds1M);
G->MeasureString(Text2M, (INT)wcslen(Text2M), &TextFont, TextOrigin2M, &MyFormat, &TextBounds2M);
//--- Results: Text 1 Width= 44.414 ("M")
//--- Text 2 Width= 76.828 ("MM")
//--- Test #2: using MeasureCharacterRanges ----------
Gdiplus::Status RCode;
Gdiplus::RectF LayoutRect(0, 0, 1000, 100);
Gdiplus::Region RegionsList[3];
Gdiplus::CharacterRange CRanges[3];
CRanges[0].First = 0; CRanges[0].Length = 1;
CRanges[1].First = 1; CRanges[1].Length = 1;
CRanges[2].First = 0; CRanges[2].Length = 2;
MyFormat.SetMeasurableCharacterRanges(3, CRanges);
G->MeasureCharacterRanges(Text2M, (INT)wcslen(Text2M), &TextFont, LayoutRect, &MyFormat, 3, RegionsList);
RCode = RegionsList[0].GetBounds(&TextBounds1M, G); // Result: Text 1 Width = 32.000 ("M")
RCode = RegionsList[1].GetBounds(&TextBounds1M, G); // Result: Text 1 Width = 32.000 ("M"; the second char)
RCode = RegionsList[2].GetBounds(&TextBounds2M, G); // Result: Text 2 Width = 64.000 ("MM")
//--- Test #3: using the good old GDI ----------
int MapModeResult = SetMapMode(hDC, MM_TEXT); // MM_TEXT is equivalent to Unit::UnitPixel?
HFONT TextFont3 = CreateFont(36, 0, 0, 0, FW_BOLD, false, false, false, ANSI_CHARSET, OUT_TT_ONLY_PRECIS, CLIP_DEFAULT_PRECIS, CLEARTYPE_QUALITY, VARIABLE_PITCH | FF_DONTCARE, L"Calibri");
HGDIOBJ PrevFont = SelectObject(hDC, TextFont3);
ABCFLOAT ABCCharData;
BOOL RFlg = GetCharABCWidthsFloat(hDC, (UINT)'M', (UINT)'M', &ABCCharData); // Results: abcfA = 2.000; abcfB = 22.000; abcfC = 2.000
//--- End of Test ---
delete G;
Does anybody have an idea why I get so different results?
Thanks in advance.

This is a development question and should be directed to a forum that assists in coding. The forum you posted to is for Windows 7 related questions.
Sorry I cannot help you
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional

Posting multiple tax codes for single line order in MIRO

Hi all ,
I have received a request from my business colleagues to investigate the possibility of posting multiple tax codes against a single line order in MIRO.
This apparently can be a possibility for such things as training.
I have searched a number of forums and tried and tested different ways in my develoment client but am unable to find a solution. admittedly I am no real expert in this area and would be gratefu;lt of any ideas / assistance / etc..

HI, There is a possible solution for this scenario.
1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
2. While posting the Invoice (TRX - FB60) following steps need to be followed.
3. Amount has to be split into two line items
4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
    created for 12.5%
5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that
    was created for 12.36%.
Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
Regards
K.Sanjai Babu

Show multiple frames in a single SWFLoader

Hello,
I am loading a document contained in an .swf file, each page is in a single frame, to an SWFLoader. The SWFLoader shows a single frame at a time.
I would like to show multiple frames at once and be able to manipulate them together (scaling, positioning).
I know how to do it with a single frame easily, but is it possible with 2 or more frames?
Thank you in advance,
Mr Cartman.

A SWF can only show one frame at a time.

GR can not printed for PO-Multiple account assignment on single line item ,

Hi!
I made a pr with single line item with 3 account assignment on percentage basis.I created a PO against .GR non valuated was automatically ticked so no account assignment was created at the time of GR posting.
Can I make a valuted GR against PO line item with multiple account assignment.
I faced another problem .I displayed the GR and after ticking out put check box in the general data page of the GR doc. the output is being saved but the update is terminated immediately.and no output page is generated in this item level.This output problem is not there at the time of single account assignment at PO line item.
Can you please let me have the solution ?
Thank snd regards,
Suranjana

> I made a pr with single line item with 3 account assignment on percentage basis.I created a PO against .GR non valuated was automatically ticked so no account assignment was created at the time of GR posting.
When you are having the multiple account assignment, then the system will force you to have GR-non valuated indicator being flagged which results in the fact there is not any FI document at GR posting stage and this is the standard feature of SAP.
> Can I make a valuted GR against PO line item with multiple account assignment.
No, not at all. The disability of GR indicator can be set in OME9 with account assignment category
> I faced another problem .I displayed the GR and after ticking out put check box in the general data page of the GR doc. the output is being saved but the update is terminated immediately.and no output page is generated in this item level.This output problem is not there at the time of single account assignment at PO line item.
In fact, it is possible to maintain multiple account assignment for each and every PO line item by selecting the 'Multiple Account Assignment' button in the 'Account Assignment' View of the Item Detail of PO. However, for such multiple account assignment selection, no accounting document will be generated upon GR maintenance. This can only be done during IR via LIV process.

How to show 250 characters in a single line.

Hi,
How do I store 250 characters in an infoobject? (An Infoobject can be of 60 characters only)
I can certainly store using 5 different infoobjects but my requirment is that the text should be visible in a single line while executing a report.
Regards
Augustine

Hello!
here is a solution from previous posts.
You may want to try this workaround:
"Create two 60 CHAR length InfoObjects and adding them as attributes to the InfoObject you originally created (say ZIO_1). Populate long texts (in your case, up to 100 CHAR) to the master data of ZIO_1. You need to make ZIO_1 values unique. That works for me where I need to store up to 480 CHAR for comments"- Bill Wu
and a link to one more thread
Re: Bypass 60 char limit
hope this helps
with regards
ashwin

Track changes showing multiple entries for a single change?

Hi there .. I'm using Pages '09 v4.1 to edit MS Word '97 documents. I've been using the 'track changes' feature to work on chapters in a book and have done so with no problems so far (about 6 chapters so far in separate files). I went to start the next chapter and noticed that when I make a single change such as highlighting a word and making it italic, the tracking bubbles will show up as individual entries for every letter instead of for a single word. The really annoying thing is that it's not consistent .. some whole-word changes show up as a single entry, while some show as a few entries but don't necessarily correspond to how many letters are in the word being changed. When I try deleting specific tracking bubbles to see which part of the word they correspond to, it varies. For example, if I put the word "similar" in italics on page one, paragraph one, it shows up as 2 entries. When I delete the last entry, "imilar" will go back to standard font, while "s" stays italic until I delete the other entry. It's as though the words in the document are being recognized based on something other than the obvious, and certain letters are being grouped together in the program's brain, while others are separate.
It's not isolated to italics, btw. If I reformat the entire document to be left-aligned instead of center-aligned, it will show lots of separate tracking bubbles in various places through the document, rather than showing one bubble for my single change.
I've tried duplicating and saving a new version of the document, as well as creating a new doc and pasting everything into that and saving as a new doc, though I wasn't sure if this would carry over the problem .. It did.
It's not the end of the world as far as finishing this job, but it's pretty annoying and will be worse for the person who ultimately verifies the changes I've made. Any help is greatly appreciated.

TekWarrior wrote:
I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
I need to know if this would cause conflicts or not?
PYRPROD.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
    (CONNECT_DATA =
      (SID = pyrp1)
PYRP1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
    (CONNECT_DATA =
      (SERVICE_NAME = pyrp1)
TekWarrior wrote:
I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
I need to know if this would cause conflicts or not?
PYRPROD.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
    (CONNECT_DATA =
      (SID = pyrp1)
PYRP1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
    (CONNECT_DATA =
      (SERVICE_NAME = pyrp1)
It won't cause any problem.

Displaying data from multiple columns into a single line graph

Post Author: hollowmatrix
CA Forum: WebIntelligence Reporting
Hey,I have an issue with the WEBI reporting.I have a data source that has multiple columns say ( month1, month2, month3, month4,.....month 12, month 13, ....month24) with the sales data for each month.Now say I call the month 1 to month 12 as "current year", and call month 13 - month 24 as "previous year".I want to put a prompt in the report which allows me to select between "current year" and "previous year".Based on the prompt value we get a graph of the sales vs month ....as in if we select "current year", then we get a graph of the sales Vs time( remember that the sales data for each month is in a different column.)and if we select "previous year" then we get a graph of the sales Vs time for previous year..( sales vs time for Month 13, month 14, month 15....month 24).I am not able to pull data from multiple columns into a single object that I can use to populate the graphs.Any help on the same will be appreciated .

Hi,
<p>
please click
here (asktom) and look for the words "how about the other way round"
</p>

Placing multiple records on a single line (variables)

Post Author: AeroProg
CA Forum: Formula
Hi, I am new to Crystal Reports, but I know Basic and other programming. I have Crystal Reports XI and am pulling data from our ERP/MRP system, Epicor Vista (Progress DB).I've been asked to figure out a Crystal Reports for our company (I get thrown into these projects). I know what the report should look like and I know how I would go about some VB code in a macro in Excel if all the data was in worksheets(i.e. like tables).Below is the data. Any help would be SO appreciated. So far I'm loving Crystal Reports and I can't wait to get some reports our company can start using but I'm stuck on understanding the timing and connection of formulas with the records.Table1 "JobMtl"Field "JobComplete":StringField "JobNum":StringTable2 "JobOper"Field "OpComplete":BooleanField "OprSeq":Number{JobMtl.JobComplete}FalseTrue{JobMtl.JobNum}20102011{JobOper.Complete}FalseTrue{JobOper.OprSeq}10203040Let's say I dragged all 4 fields into a report. It would look like this.JobNum JobComplete OprSeq OpComplete2010       False          10          True2010       False          20          True2010       False          30          False2010       False          40          False2011       False          10          True2011       False          20          False2011       False          30          FalseI would it to read like thisJobNum JobComplete PrevOp CurrOp NextOp2010       False          20          30        402011       False          10          20        30**Note: {JobMtl.JobComplete} will be used so I am only reporting jobs that are "not complete". I guess it means nothing to you guys, but I put it here because I was not sure if this will be involved in a formula.Thanks,AnthonyMy email is ls1z282002_at_yahoo.com (replace "_at_" => "@") if you would a *.RPT with the data I've shown.

Post Author: GraemeG
CA Forum: Formula
I don't know if you can attach files... if you can I'll attach the sample. In the mean time, here's the rub...
(By the way, I use basic syntax in my formulae... old habits and all that!)
I created two tables (actually they were two sheets in a spreadsheet) called JobMtl and JobOper and put some records in in the format AeroProg described above.
Create a formula called aResetVariables:
'Define shared variables
shared CurrOpNo as number
shared PrevOpNo as number
shared NextOpNo as number
'Set Variables to zero
CurrOpNo = 0
PrevOpNo = 0
NextOpNo = 0
'This next line is just to keep Crystal happy
formula = 0
Create one called bCurrentOp:
'Define shared variables
shared CurrOpNo as number
shared PrevOpNo as number
shared NextOpNo as number
if CurrOpNo = 0 and {JobOper_.JobComplete} = "false" then
    CurrOpNo = {JobOper_.OprSeq}
end if
formula = CurrOpNo
Create one called cPreviousOp
'Define shared variables
shared CurrOpNo as number
shared PrevOpNo as number
shared NextOpNo as number
if {JobOper_.OprSeq} < CurrOpNo or CurrOpNo = 0 then
    PrevOpNo = {JobOper_.OprSeq}
end if
formula = PrevOpNo
Create one called cNextOp
'Define shared variables
shared CurrOpNo as number
shared PrevOpNo as number
shared NextOpNo as number
if {JobOper_.OprSeq} > CurrOpNo and CurrOpNo <> 0 and NextOpNo = 0 then
    NextOpNo = {JobOper_.OprSeq}
end if
formula = NextOpNo
In your Crystal report, group by the JobNum and put the aResetVariables formula into the group header. This will make sure that the variable are set back to zero every time the Job No changes. Suppress the group header.
Plonk what ever you want into the detail line but suppress that too.
Put the JobNum, JobComplete, cPreviousOp, bCurrentOp and dNextOp formulae into the footer. (Donu2019t suppress this section!)
Run the report and you should get a line for each job showing the previous, current and next operation. If you tinker with the status' it seems to work everything out okay.

Pulling multiple variables into a single line?

There really seems like an easy fix to this, but I'm just not finding it on my own here.
Here's my setup: I've got four variables that are pulling data from our system: Customer Address, City, State, and Zip - for some silly reason we do not have a single variable for all of these combined.
As such, I'm trying to include all of thee variables in one field, this is what I've got set up as of now:
Four Invisible fields that pull this data into the form individually
One field titled "Customer_Address Line"
A formcalc line with the following data:
Customer_Address_Line = CUSTOMER_ADDRESS + CUSTOMER_CITY + CUSTOMER_CATE + CUSTOMER_ZIPCODE
I've tried various different methods to try to get this to print correctly but in the end I've only managed to confuse myself.
The best I can get is only the zipcode to print.
What am I missing???
Any help would be GREATLY appreciated! Thanks

Radzmar is right .....you need the concat function to add strings together in FormCalc. Your technique is used with Javascript.
The object names are case sensitive so make sure you have the right case. Also you can put yor cursor in the script editor wher you want the reference to the object placed, then hold down the ctrl key and move your mouse to the desired field (the cursor will change to a V). Now click on the mouse and a reference will be placed in the script editor.
Hope that helps
Paul

Showing multiple Objects in a single row in Gantt Chart

Hi,
I am wokring on extending the cPro4.5 gantt chart.
I have a tree hierarchy which I want to display on the Gantt Chart. But my need is to display all the children and its parent in single row i.e. in a new row bove the Poject row in the gantt tree (hierarchy shown on the left side) of existing chart.
Is it possible with the Gantt chart?
If yes, then where and how do I pass this information to the transformation I call in the end to convert the abap tables into XML file which is finally shown on the gantt.
Kindly guide.
Regards,
Varun

Hi Varum,
Sorry but I think I don't understand your requirement. Do you need see on the left of your gantt project structure?
Thanks,
Sara

Multiple Colors in a single Spry Menu

Hi,
I'm trying to come up with the simplest way to have 3
different sets of colors (main items/rollover and submenu
items/rollovers)in a vertical menu. I have three groupings of links
and each group is category based and needs to be color coded as
well as the associated submenus.
The Spry CSS does not wrap the menu in a ID, the ID that's
there is for the JS File. I'd like to leverage the ID so I can
develop 2 additional ones for the other 2 categories. I'd like to
add as few new styles as possible and keep the code clean. Has
anyone done this yet? Thanks in advance.

I put up this example a while ago, but haven't visited it
since, but it may
give you an idea:
http://dreamweaverresources.com/spry-widgets/spry-vertical-menu/index.html
check out the spryMenuBarVertical.css and find the comment:
/* CHANGING COLOR ON SUB MENUS ....*/
to see where I created further css rules to give the flyouts
a different
colour to the parent.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
Spry Widget Examples
http://www.dreamweaverresources.com/spry-widgets/
~ Forum Posting Guidelines ~
http://www.adobe.com/support/forums/guidelines.html
CSS Tutorials for Dreamweaver:
http://www.adobe.com/devnet/dreamweaver/css.html
"Glenn_Stern" <[email protected]> wrote in
message
news:gbgevi$ccl$[email protected]..
> Could you give me one example? Thanks!

Showing Multiple Colors in a single Line series Chart

Similar Messages

Maybe you are looking for