Showing not valid file masage

Hi when i open my email there is pdf docouments not open showing  not valid file

What is your email app?
What is the version of your Adobe Reader?
Would you send the invalid PDF document to [email protected] as an email attachment?  Please include the link to this forum post in your email for reference.  Thank you.

Similar Messages

  • Why is T-Mobile contract-free iPhone 6  not unlocked , showing * SIM not Valid* erorr outside of US?

    Just before Christmas I purchased my iPhone 6 64 at full-price from the Stonebriar Apple Store, TX. At the time of purchase, I indicated several times that I want to use my phone outside of US and Apple Store representative assured  me that my only option was  T-Mobile contract-free iPhone which came   totally unlocked and I would be able to use it internationally with no problem. I used my phone about 3 weeks in US with my prepaid AT&T SIM card without any problems and I was the happiest with my purchase but since I came back to my country my biggest nightmare has started : Just arrived at airport trying to use my local SIM, I faced the *SIM not valid* message due to a *Activation Policy*. My awful experience just started with both my family and I had the most frustrating time trying to find each other at airport. The next day when I called Apple care and explained the situation the adviser told me that although I bought the phone contract-free, my phone is now locked to AT&T and I had to contact them. I contacted AT&T several times spending countless hours to explain the situation and I spoke to near 9 different people including a manager ; at first they did not even believe me and they told me that it is impossible for AT&T to just block ppl's phones just because they activated their phone with their SIM -and it is totally making sense- but I insisted that Apple Care told me that my phone is locked by them and this is evident from their system. Anyway, one of them suggested me to request unlock my device via ATT website and I waited 4 days for their response till I received the denial because according to their record I used my prepaid service less than 6 months and I am not eligible for unlock request!!! Angry me called them again and after being on the line more that one hour, the adviser told me that my phone is not locked by them and it is actually Mercury who did this and they are the one that I had to call - at that moment I remembered that the night before I just tried my T-mobile SIM in my phone for few seconds to see what would happen and that's it - no service no activation ! When I called Apple this time and after speaking with at least 3 different pple, they told me that their system is  actually unable to show which carrier has locked the device and they could only see which SIM card is the last one used in the phone  and the problem is merely because of a latent Activation Policy  that some iPhones can be used only in US and nowhere else and in US you may use it with different carriers but it does not mean that the phone is unlocked, and my only option is to contact the Apple Store I made my purchase to see whether they can(!! it is up to them to do it, they can easily say they can not) exchange the phone or not ! I told them that it is impossible for me to go there because I will not come back to US in next 9 months and I do not have access to any apple stores in my country, but this is the only thing that they could do , to say that they were sorry for the inconvenience.
    The sad part of story is that after waiting 2 weeks without phone and  spending more than 100$ to make international phone calls, this is the only answer they had for me. It is very hard for me to believe that Apple does not have any control over their own Activation Policy  and for some one with my situation they are completely clueless.   Apart from being  frustrated, I am very disappointed with Apple and their costumer care because the advisers seemed very confusing or maybe they themselves were confused even more ! It is very abusive and it is like that I am robbed almost 1000$. Please help if you have the same experience or if you suggest that it is a good idea to file a complaint !

    I managed to chat with an Apple Online Store representative, and he assured me that if purchased online it's completely unlocked from day 1...
    So i guess that counts as official confirmation.
    I'm still worried though, something is not right with all this contradicting information, or it's probably just marketing!
    I know they are in the business of making profit and I myself work in an Apple related business, but i have to stress that there are moral and freedom-of-market issues with locked phones, they really are illegal in many countries (correct if you ask me).
    Locked phones paid full price is troll, really makes no sense at all!

  • The File name property is not valid. The file name is a device or contains invalid characters

    I have an SSIS task that has run successfully for years. They just moved the dtsx to a new server and now it is failing. 
    Issue:
    The task has a data flow that writes a raw file destination. It then has a subsequent data flow that reads the raw file destination. 
    The path and name of the raw file is passed to each of the data flows via the same variable. 
    The raw file resides in a folder on the server in the same path that the dtsx resides in. 
    The task fails with the "The File name property is not valid. The file name is a device or contains invalid characters" error when trying to access the raw file.
    What we have done to troubleshoot:
    1. I ran the task successfully on my local machine so it is definitely a server issue.
    2. The first thing we were seeing was that it failed trying to write to the raw file. The task is set to "Create Always". 
    3. We saw that the dba's copied over the entire directory structure from the old server which included a previously created raw file, so we deleted the raw file.
    4. We reran the task and it successfully wrote a new raw file but then failed on reading the raw file with the same error as above.
    5. We reran the task AGAIN and this time it failed trying to write the raw file throwing the same error as above.
    6. The dba looked at the directory and the account that performs the task has full control.
    7. The dba looked at the raw file that was created and verified that the account that performs the task has full control of the file and that it is the owner of the file.
    Summary:
    The task fails when trying to access the file EXCEPT when the file does not exist. In that situation it can write the file but subsequently fails in accessing it again.

    Hi Whalensdad,
    Based on my research, the issue can be caused by the following reasons:
    There are some invalid characters in the File name at package runtime. In this scenario, just as Russ said, could you please post the value that is in the File name variable? Also use a Script Task with Messagebox.show to show the variable values at runtime.
    May be it changes to others at run time.
    The account runs the package not having access to all the folders in the path. Since you are moving the dtsx file from one server to the current server, do you also move the raw file to the same folder in the current server? Does the user runs the package
    have access to all the folders in the path? To solve this, please ensure that the user has access to all folders and the raw file in the path on the current server.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support
    Please see the response above. I can't use a message box on a server so I logged the values to the database. The resource account has full control to the folder. I haven't been able to get the DBA to check the SQL Agents permissions, but I was always under
    the impression that if you use "Run As" on the task, it will not use the SQL Agent but the account you identify it to "Run As". The "Run As" account has full control on the folder and file.

  • Pdf file error.this path is not valid

    I have a pdf file of 100 mb.when i copied it to my Lumia 720,its not getting opened and the error msg "this path is not valid" is shown.how can i open this file in my phone?plz help me out.thank you.

    Hi,
    Seems you have the wrong image.
    The ASA5500 software download section for ASA5580 shows the following software image file
    Description:
    Cisco  Adaptive Security Appliance Software for the ASA 5580 and ASA5585.  Please read the Release Note prior to downloading this release.
    Release:
    8.2.5 Interim
    Release Date:
    13/Sep/2012
    File Name:
    asa825-33-smp-k8.bin
    Size:
    17.03 MB (17860608 bytes)
    So I think you need to get the above image file to have a compatible software image for your ASA 5580
    - Jouni

  • Archos 7: the file path is not valid

    Hi,
    I installed Adobe Readwe on my Archos 7 Tablet (Android 2.1).
    Every time I try to open a file the message "the file path is not valid" shows.
    Could you please help me ?
    Regards
    Konstantin Tzovanis

    Hey,
    I'm having the same problem.
    I just recently downloaded and installed the Acrobat Reader on my Archos 7 (home tablet). The installation run without any problems. But whenever I try to open a PDF file, a message shows up, telling me "Error: The file path is not valid".
    I have tried almost every single folder on my tablet. Does the PDF file need a specific file name? Do I have to create a folder (what would be it's name)?
    I haven't tried to download PDFs from the internet... it might work, but it would be great, if I can copy some PDFs from my computer to my tablet, too.
    Please Help!
    Thanks
    Matt

  • "Could not complete the image size command because the file name was not valid"

    Hello,
    Some one please help me,when i try to resize psd file its showing this message ...whats the issue ???
    "Could not complete the image size command because the file name was not valid"
    Thanks !

    Can you change other images via Image > Image Size?
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)

  • C#: 'Not a Valid File Name' error when I know the name and link are correct.

    I'm receiving "Not a valid file name" when I know I have used this link before and the filename is spelled correctly. I'm not sure if I should be looking at something else. This is my connection code.  It fails on "conn.Open()".
    For security reasons, I edited the link... it is not a working link for this question.
    private void InitializeDBConnection()
    strConn = @"Provider=Microsoft.ACE.OLEDB.12.0;Data Source=http://database.storage.net/App_Data/Tracking.mdb";
    MessageBox.Show(strConn);
    MyConn = new OleDbConnection(strConn);
    MyConn.Open();
    SV

    A database must be locally available via the filesystem, e.g. an UNC path would do it also.

  • Existing files on drive connected to latest Airport Extreme do not show up, however files copied over the air to the drive do. Any ideas?

    I have the latest Airport Extreme with a Seagate drive connected. I copied files to the drive while it was connected to my MacBook Pro. The files do not show up when connected to the AE, but they appear when connected to the Macbook, Files copied over the network to the drive appear. The drive is formatted HFS+.

         After playing with this for the last few days, I found a solution. Under the "Disks" tab in Airport Utility, the "Secure Shared Disks" drop down needs to be set to "With device password". Mine was set to "With acounts", which even after correct authentication, none of the files would appear.
         Another interesting note:  The files that I could see, the ones I copied over the network, do not appear now. I can copy over new files, and they show up, but the ones copied prior to changing the "Secure Shared Disks" option, do not.

  • I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

    I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

    If they were songs you purchased from itunes, try redownloading them from your purchases...
    if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

  • Outlook - The path specified for the file SharePoint Lists PST is not valid

    Some users are connecting via Citrix XenApp to Microsoft Server 2008 R2 and using Microsoft Office 2010 (14.0.7109.5000) SP2 MSO (14.0.7116.5000) - Microsoft Office Profressional Plus 2010 x86 version for their email.  Microsoft Exchange Server 2010
    SP2 for email.
    They are connected to Microsoft SharePoint 2010 SP2 August 2013 CU, via a SharePoint Calender; they have View permissions to the SharePoint calendar using Classic Mode permissions (Not Claims).  No permissions have / are changing on this SharePoint
    Calendar.  They connect to the SharePoint Calender to Outlook.
    When they open up their Office Outlook client, they receive an error "Outlook Data File" "The path specified for the file \AppData\Local\Microsoft\Outlook\SharePoint Lists.pst is not valid." OK
    They select OK and they get a window popping up with the option to try to find the SharePoint list.  "Create/Open Outlook Data File" (File name: 'SharePoint Lists') Open Cancel.  They select Cancel.
    They are returned to their Outlook client "email." 
    As an I.T. administrator and SharePoint Administrator, I had a remote session with them, using Bomgar software and I Go to File Menu, Account Settings, SharePoint Lists Tab but there is no list there so go to the Data Files tab and see SharePoint Lists listed. 
    Selecting it once, and clicking on Settings... button gives error message similar to the one above about PST not valid.
    STRANGE in that, when you do that!  You can go to Home tab, Calendar (Ctrl+2), and see Other Calendars and now the SharePoint calendar that was supposed to be there before, but was just "empty!"  There was only the Other Calendars
    option but it didn't have any "sub" calendar item.
    A similar issue is when Other Calendars is listed, and has a sub calendar listed, a SharePoint connected calendar.  You click on it and get "Microsoft Outlook" "The set of folders cannot be opened. The path specified for the file c:\Users\USERNAMEHERE\AppData\Local\Microsoft\Outlook\SharePoint
    Lists.pst is not valid."  OK
    Click OK and go through the above steps to get the same result.  After going into Account Settings, Data Files, checking on the Settings... button, and receiving the error message, again mentioned above, and the prompt to Create/Open Outlook Data File,
    thgen I can go back into Account Settings, Data Files, and double click on the SharePoint Lists and instead of an error, the Outlook Data File comes up, with Change Password... Compact Now, Comment, Name, Filename, Format (Outlook Data File) OK Cancel.
    Can go back to the Calendar (Ctrl+2) and Other Calendars, and the SharePoint Calendar "Sub calendar" will appear and operate as normal!  All was done was go into the Account settings and "check" on the "error." 
    Tried to delete the SharePoint Lists and close out and add it and then go back in, and it "worked" for a few days.  I later turned on Logging and for over 24 hours it was on for the user.  The user was not on forever. 
    In the Outlook Logging folder, from the users profile, I found many *.log files, firstrun, OPMLog, ETL files, one of which is 6MB, and some prof_001_outlook....txt files.  I clickedo n the SharePoint Lists.pst.log file 1KB
    It is listed here:
    Store File Name: SharePoint Lists.pst
    Date|Time|Action|Search Owner|NID|Change Action|Change Semantics|URL|Count Of DocIDs|Next NID Index to add to All Msg folder|Next NID Index to push to FTE|Folder Path|Folder Path ID|HRESULT|Result Status
    2014/05/23|08:10:22:672|SGD_ScOpenNode(fCreate=FALSE)||||0x80040818|FAIL
    2014/05/23|08:10:22:672|SGD_ScOpenNode(fCreate=TRUE)|||||OK
    2014/05/23|08:10:22:673|Marking store for re-push: Newly created store|0|||||||||||OK
    2014/05/23|08:10:22:673|SGO_ScMarkPushEverythingDone|0|||||||||||OK
    firstrun.log
    *** Starting First Run (05-23-2014 07:32:08) ***
    ...HrPreSplashFirstRun called.
    ...HrPreLogFirstRun called.
    ...HrPostLogFirstRun called.
    ...deleting WAB4/UseOutlook because we're using MAPI.
    ...writing UUID to HKCU.
    ...setting Primary Client to Outlook.
    *** Ending First Run (05-23-2014 07:32:26) ***
    OPMLog.log
    2014.05.23 07:32:28 <<<< Logging Started (level is LTF_TRACE) >>>>
    2014.05.23 07:32:28 HELPER::Initialize called
    2014.05.23 07:32:28 Initializing: Finding a Transport
    2014.05.23 07:32:28 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
    2014.05.23 07:32:28 MAPI Status: (-- -- ---/--- -- ---)
    2014.05.23 07:32:28 MAPI XP Call: TransportLogon, hr = 0x00000000
    2014.05.23 07:32:28 Initializing: Found a transport, Error code = 0x00000000
    2014.05.23 07:32:28 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
    2014.05.23 07:32:28 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 07:32:28 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
    2014.05.23 07:32:28 HELPER::Initialize done, Error code = 0x00000000
    2014.05.23 07:32:28 HELPER::GetCapabilities called, Error code = 0x00000000
    2014.05.23 07:32:28 HELPER::Initialize called
    2014.05.23 07:32:28 Initializing: Finding a Transport
    2014.05.23 07:32:28 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
    2014.05.23 07:32:28 MAPI Status: (-- -- ---/--- -- ---)
    2014.05.23 07:32:28 MAPI XP Call: TransportLogon, hr = 0x00000000
    2014.05.23 07:32:28 Initializing: Found a transport, Error code = 0x00000000
    2014.05.23 07:32:28 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
    2014.05.23 07:32:28 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 07:32:28 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
    2014.05.23 07:32:28 HELPER::Initialize done, Error code = 0x00000000
    2014.05.23 07:32:28 HELPER::GetCapabilities called, Error code = 0x00000000
    2014.05.23 07:32:45 HELPER::Uninitialize called
    2014.05.23 07:32:45 MAPI Status: (-- -- ---/--- -- ---)
    2014.05.23 07:32:45 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000
    2014.05.23 07:32:45 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000
    2014.05.23 07:32:45 MAPI XP Call: Shutdown, hr = 0x00000000
    2014.05.23 07:32:45 HELPER::Uninitialize called
    2014.05.23 07:32:45 MAPI Status: (-- -- ---/--- -- ---)
    2014.05.23 07:32:45 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000
    2014.05.23 07:32:45 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000
    2014.05.23 07:32:45 MAPI XP Call: Shutdown, hr = 0x00000000
    2014.05.23 07:32:45 Resource manager terminated
    2014.05.23 07:34:06 <<<< Logging Started (level is LTF_TRACE) >>>>
    2014.05.23 07:34:06 HELPER::Initialize called
    2014.05.23 07:34:06 Initializing: Finding a Transport
    2014.05.23 07:34:06 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
    2014.05.23 07:34:06 MAPI Status: (-- -- ---/--- -- ---)
    2014.05.23 07:34:06 MAPI XP Call: TransportLogon, hr = 0x00000000
    2014.05.23 07:34:06 Initializing: Found a transport, Error code = 0x00000000
    2014.05.23 07:34:06 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
    2014.05.23 07:34:06 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 07:34:06 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
    2014.05.23 07:34:06 HELPER::Initialize done, Error code = 0x00000000
    2014.05.23 07:34:06 HELPER::GetCapabilities called, Error code = 0x00000000
    2014.05.23 07:34:06 HELPER::Initialize called
    2014.05.23 07:34:06 Initializing: Finding a Transport
    2014.05.23 07:34:06 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
    2014.05.23 07:34:06 MAPI Status: (-- -- ---/--- -- ---)
    2014.05.23 07:34:06 MAPI XP Call: TransportLogon, hr = 0x00000000
    2014.05.23 07:34:06 Initializing: Found a transport, Error code = 0x00000000
    2014.05.23 07:34:06 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
    2014.05.23 07:34:06 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 07:34:06 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
    2014.05.23 07:34:06 HELPER::Initialize done, Error code = 0x00000000
    2014.05.23 07:34:06 HELPER::GetCapabilities called, Error code = 0x00000000
    2014.05.23 07:35:12 [email protected]: Synch operation started (flags = 00000001)
    2014.05.23 07:35:12 [email protected]: UploadItems: 1 messages to send
    2014.05.23 07:35:12 EXECUTING Put MAPI TASK
    2014.05.23 07:35:13 Starting the Spooling Cycle
    2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 07:35:13 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
    2014.05.23 07:35:13 Sending one message
    2014.05.23 07:35:13 Progress: Sending message 'RE: Good Morning!' (size 14.76 KBytes)
    2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl act)
    2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 07:35:13 MAPI XP Call: SubmitMessage, hr = 0x00000000
    2014.05.23 07:35:13 MAPI XP Call: EndMessage, hr = 0x00000000
    2014.05.23 07:35:13 FINISHED MAPI TASK
    2014.05.23 07:35:13 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
    2014.05.23 07:35:13 [email protected]: Synch operation completed
    2014.05.23 07:35:13 Sending done, Error code = 0x00000000
    2014.05.23 07:35:13 Sending done, Error code = 0x8004010f
    2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 07:35:13 Finishing the Spooling Cycle, Error code = 0x00000000
    2014.05.23 07:37:53 [email protected]: Synch operation started (flags = 00000001)
    2014.05.23 07:37:53 [email protected]: UploadItems: 1 messages to send
    2014.05.23 07:37:53 EXECUTING Put MAPI TASK
    2014.05.23 07:37:53 Starting the Spooling Cycle
    2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 07:37:53 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
    2014.05.23 07:37:53 Sending one message
    2014.05.23 07:37:53 Progress: Sending message 'RE: Good Morning!' (size 14.03 KBytes)
    2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl act)
    2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 07:37:53 MAPI XP Call: SubmitMessage, hr = 0x00000000
    2014.05.23 07:37:53 MAPI XP Call: EndMessage, hr = 0x00000000
    2014.05.23 07:37:53 FINISHED MAPI TASK
    2014.05.23 07:37:53 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
    2014.05.23 07:37:53 [email protected]: Synch operation completed
    2014.05.23 07:37:53 Sending done, Error code = 0x00000000
    2014.05.23 07:37:53 Sending done, Error code = 0x8004010f
    2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 07:37:53 Finishing the Spooling Cycle, Error code = 0x00000000
    2014.05.23 07:57:34 [email protected]: Synch operation started (flags = 00000001)
    2014.05.23 07:57:34 [email protected]: UploadItems: 1 messages to send
    2014.05.23 07:57:34 EXECUTING Put MAPI TASK
    2014.05.23 07:57:34 Starting the Spooling Cycle
    2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 07:57:34 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
    2014.05.23 07:57:34 Sending one message
    2014.05.23 07:57:34 Progress: Sending message 'TP - Hold PE Call ' (size 6.00 KBytes)
    2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl act)
    2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 07:57:34 MAPI XP Call: SubmitMessage, hr = 0x00000000
    2014.05.23 07:57:34 MAPI XP Call: EndMessage, hr = 0x00000000
    2014.05.23 07:57:34 FINISHED MAPI TASK
    2014.05.23 07:57:34 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
    2014.05.23 07:57:34 [email protected]: Synch operation completed
    2014.05.23 07:57:34 Sending done, Error code = 0x00000000
    2014.05.23 07:57:34 Sending done, Error code = 0x8004010f
    2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 07:57:34 Finishing the Spooling Cycle, Error code = 0x00000000
    2014.05.23 07:58:58 [email protected]: Synch operation started (flags = 00000001)
    2014.05.23 07:58:58 [email protected]: UploadItems: 1 messages to send
    2014.05.23 07:58:58 EXECUTING Put MAPI TASK
    2014.05.23 07:58:58 Starting the Spooling Cycle
    2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 07:58:58 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
    2014.05.23 07:58:58 Sending one message
    2014.05.23 07:58:58 Progress: Sending message 'TP - Hold PE Call' (size 6.00 KBytes)
    2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl act)
    2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 07:58:58 MAPI XP Call: SubmitMessage, hr = 0x00000000
    2014.05.23 07:58:58 MAPI XP Call: EndMessage, hr = 0x00000000
    2014.05.23 07:58:58 FINISHED MAPI TASK
    2014.05.23 07:58:58 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
    2014.05.23 07:58:58 [email protected]: Synch operation completed
    2014.05.23 07:58:58 Sending done, Error code = 0x00000000
    2014.05.23 07:58:58 Sending done, Error code = 0x8004010f
    2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 07:58:58 Finishing the Spooling Cycle, Error code = 0x00000000
    2014.05.23 08:03:12 [email protected]: Synch operation started (flags = 00000001)
    2014.05.23 08:03:12 [email protected]: UploadItems: 1 messages to send
    2014.05.23 08:03:12 EXECUTING Put MAPI TASK
    2014.05.23 08:03:12 Starting the Spooling Cycle
    2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 08:03:12 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
    2014.05.23 08:03:12 Sending one message
    2014.05.23 08:03:12 Progress: Sending message 'Accepted: TP - Hold PE Call' (size 5.70 KBytes)
    2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl act)
    2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 08:03:12 MAPI XP Call: SubmitMessage, hr = 0x00000000
    2014.05.23 08:03:12 MAPI XP Call: EndMessage, hr = 0x00000000
    2014.05.23 08:03:12 FINISHED MAPI TASK
    2014.05.23 08:03:12 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
    2014.05.23 08:03:12 [email protected]: Synch operation completed
    2014.05.23 08:03:12 Sending done, Error code = 0x00000000
    2014.05.23 08:03:12 Sending done, Error code = 0x8004010f
    2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 08:03:12 Finishing the Spooling Cycle, Error code = 0x00000000
    2014.05.23 08:03:16 [email protected]: Synch operation started (flags = 00000001)
    2014.05.23 08:03:16 [email protected]: UploadItems: 1 messages to send
    2014.05.23 08:03:16 EXECUTING Put MAPI TASK
    2014.05.23 08:03:17 Starting the Spooling Cycle
    2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 08:03:17 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
    2014.05.23 08:03:17 Sending one message
    2014.05.23 08:03:17 Progress: Sending message 'Accepted: TP - Hold PE Call ' (size 5.70 KBytes)
    2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl act)
    2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl ---)
    2014.05.23 08:03:17 MAPI XP Call: SubmitMessage, hr = 0x00000000
    2014.05.23 08:03:17 MAPI XP Call: EndMessage, hr = 0x00000000
    2014.05.23 08:03:17 FINISHED MAPI TASK
    2014.05.23 08:03:17 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
    2014.05.23 08:03:17 [email protected]: Synch operation completed
    2014.05.23 08:03:17 Sending done, Error code = 0x00000000
    2014.05.23 08:03:17 Sending done, Error code = 0x8004010f
    2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 08:03:17 Finishing the Spooling Cycle, Error code = 0x00000000
    2014.05.23 08:04:08 [email protected]: Synch operation started (flags = 00000031)
    2014.05.23 08:04:08 [email protected]: StartImport(flags = 00000000, max msg = ffffffff): full items
    2014.05.23 08:04:08 [email protected]: UploadItems: 0 messages to send
    2014.05.23 08:04:08 [email protected]: Synch operation started (flags = 00000031)
    2014.05.23 08:04:08 [email protected]: StartImport(flags = 00000000, max msg = ffffffff): full items
    2014.05.23 08:04:08 [email protected]: UploadItems: 0 messages to send
    2014.05.23 08:04:08 Starting the Spooling Cycle
    2014.05.23 08:04:08 MAPI Status: (IN fl ---/OUT -- ---)
    2014.05.23 08:04:08 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c
    2014.05.23 08:04:08 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 636
    2014.05.23 08:04:08 Progress: Receiving message (message 1 out of 637, size unknown)
    2014.05.23 08:04:08 Downloading one message
    2014.05.23 08:04:08 Transport tightly coupled with store, download is NOOP
    2014.05.23 08:04:08 Downloading done, Error code = 0x8004010f
    2014.05.23 08:04:08 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 08:04:08 FINISHED MAPI TASK
    2014.05.23 08:04:08 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
    2014.05.23 08:04:08 Finishing the Spooling Cycle, Error code = 0x00000000
    2014.05.23 08:04:08 Starting the Spooling Cycle
    2014.05.23 08:04:08 MAPI Status: (IN fl ---/OUT -- ---)
    2014.05.23 08:04:08 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c
    2014.05.23 08:04:08 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 706
    2014.05.23 08:04:08 Progress: Receiving message (message 1 out of 707, size unknown)
    2014.05.23 08:04:08 Downloading one message
    2014.05.23 08:04:08 Transport tightly coupled with store, download is NOOP
    2014.05.23 08:04:08 Downloading done, Error code = 0x8004010f
    2014.05.23 08:04:08 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 08:04:08 FINISHED MAPI TASK
    2014.05.23 08:04:08 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
    2014.05.23 08:04:08 Finishing the Spooling Cycle, Error code = 0x00000000
    2014.05.23 08:04:08 EXECUTING EndSession MAPI TASK
    2014.05.23 08:04:09 Starting the Simplified Transfer Cycle
    2014.05.23 08:04:09 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 636
    2014.05.23 08:04:09 Progress: Receiving message (message 1 out of 637, size unknown)
    2014.05.23 08:04:09 Downloading one message
    2014.05.23 08:04:09 MAPI Status: (IN -- act/OUT -- ---)
    2014.05.23 08:04:09 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 08:04:09 Downloading done, Error code = 0x8004010f
    2014.05.23 08:04:09 Finishing the Spooling Cycle, Error code = 0x00000000
    2014.05.23 08:04:09 FINISHED MAPI TASK
    2014.05.23 08:04:09 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
    2014.05.23 08:04:09 [email protected]: Synch operation completed
    2014.05.23 08:04:09 EXECUTING EndSession MAPI TASK
    2014.05.23 08:04:09 Starting the Simplified Transfer Cycle
    2014.05.23 08:04:09 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 706
    2014.05.23 08:04:09 Progress: Receiving message (message 1 out of 707, size unknown)
    2014.05.23 08:04:09 Downloading one message
    2014.05.23 08:04:09 MAPI Status: (IN -- act/OUT -- ---)
    2014.05.23 08:04:09 MAPI Status: (IN -- ---/OUT -- ---)
    2014.05.23 08:04:09 Downloading done, Error code = 0x8004010f
    2014.05.23 08:04:09 Finishing the Spooling Cycle, Error code = 0x00000000
    2014.05.23 08:04:09 FINISHED MAPI TASK
    2014.05.23 08:04:09 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
    2014.05.23 08:04:09 [email protected]: Synch operation completed
    They are using a CRM client 2011 (Server is CRM 2011 - on premise) as well as having other connected email accounts - managed accounts, like Accounting or HR, etc.
    What can I look for / provide for you all to assist?  I am almost ready to open a ticket with Microsoft to resolve this as it has been happening for multiple users for multiple weeks.
    When "I" go in, logged on as myself, I do NOT have this problem, however my account is not "old" in that I just logged onto the account domain\matthew.carter, where these users use their accounts day in and day out for weeks / months
    / (some years).
    Thank you!

    Did you post this in the SharePoint Section? Did you find a resolution for this?
    We are experiencing the same issue and have yet to find anything to resolve this issue.
    Regards, Daniel
    I ended up scouring his old posts looking for the other thread, and he did open one in the SharePoint forum:
    https://social.technet.microsoft.com/Forums/office/en-US/3dded85b-73ee-47dc-9609-6ee65f329983/outlook-the-path-specified-for-the-file-sharepoint-lists-pst-is-not-valid?forum=sharepointadminprevious#3dded85b-73ee-47dc-9609-6ee65f329983
    Unfortunately, what was marked as an "answer" by the moderators isn't really an answer at all to the problem. We are experiencing pretty much an identical issue with a calendar people are adding to Outlook 2010 from SharePoint 2010 within a XenApp
    server (using roaming profiles). However, we have not had the issue occur outside of XenApp yet.

  • Can't upload file to Sharepoint "The URL is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.

    Hello,
    I do database/SharePoint upgrades for SQL and or SharePoint or moving to new servers frequently.  In a nutshell, I backup the database (run the upgrade tools if necessary), load new server and sql software and restore the db, load but
    not configure SharePoint, and add the content db that was resotred through powershell.  I have never had any big issues with this before.  This time, I have done this same procedure as there is a new domain and new server.  Server and
    SQL 2008R2 and SharePoint 2010 on both old and new servers - just new server and new domain.  I have done this twice now (as it is a virtual server) and I have the same issue.  I can't check anything in or upload anything new.  I get the error
    - The URL '<path to the file and filename>' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.  I have made sure
    that my database and log files are on a drive that has plenty of space (db is not restricted to grow).  I have made sure my database is not locked.  I have checked to see that I don't have version in my indexed columns in that library (I
    don't have any).  I have checked that my recycle bin is on in central admin.  I am not using RBS.  I have turned on verbose logging and found the following when I searched on the correlation ID from the error message - it is saying invalid
    column name extension.  I am not sure what to do at this point.  I can see there is a column in SQL called extension in the AllDocs table. Thanks.
    09/16/2014 10:41:44.84  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Logging Correlation Data       xmnv Medium   Name=Request (POST:http://sqlsp:80/disc/_layouts/checkin.aspx?List=%7B5219EA15-A36A-4162-A188-4B8D518D7E79%7D&FileName=%2Fdisc%2FJigs%20and%20Fixtures%2FJigs%20and%20Fixtures%2FAssembly%2F30%20Assembly%2DGeneral%2FJ30XXA50%2D00%2Easm&IsDlg=1) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:44.85  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Logging Correlation Data       xmnv Medium   Site=/ 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Database                       d0d6 High     System.Data.SqlClient.SqlException: Invalid column name 'Extension'.    
    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior
    runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlDataReader.HasMoreResults()     at System.Data.SqlClient.SqlDataReader.NextResult()    
    at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock)     at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Database                       d0d6 High     System.Data.SqlClient.SqlException: Invalid column name 'Extension'.    
    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.Run(RunBehavior
    runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlDataReader.HasMoreResults()     at System.Data.SqlClient.SqlDataReader.NextResult()    
    at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock)     at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     General                        8kh7 High     The URL 'Jigs and Fixtures/Jigs and Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm'
    is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web. 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     General                        9mpn High     File exception: Microsoft.SharePoint.SPException: The URL 'Jigs and
    Fixtures/Jigs and Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web. ---> System.Runtime.InteropServices.COMException
    (0x81020030): The URL 'Jigs and Fixtures/Jigs and Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.    
    at Microsoft.SharePoint.Library.SPRequestInternalClass.CheckInFile(String bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafe... 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01* w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     General                        9mpn High     ...ArrayWriter pUniqueFieldCallback)     at Microsoft.SharePoint.Library.SPRequest.CheckInFile(String
    bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)     --- End of inner exception
    stack trace ---     at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     at Microsoft.SharePoint.Library.SPRequest.CheckInFile(String bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String
    bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)     at Microsoft.SharePoint.SPFile.CheckIn(String comment, SPCheckinType checkInType, Boolean
    b... 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01* w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     General                        9mpn High     ...IsMigrate, SPUser modifiedBy) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Runtime                        tkau Unexpected System.Runtime.InteropServices.COMException: The URL 'Jigs and Fixtures/Jigs and
    Fixtures/Assembly/30 Assembly-General/J30XXA50-00.asm' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.    at Microsoft.SharePoint.Library.SPRequestInternalClass.CheckInFile(String
    bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)     at Microsoft.SharePoint.Library.SPRequest.CheckInFile(String
    bstrUrl, String bstrWebRelativeUrl, Int32 iCheckinType, String bstrCheckinComment, Boolean bIsMigrate, Int32 iEditorId, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter ... 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.01* w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Runtime                        tkau Unexpected ...pUniqueFieldCallback) 88fb3615-c87c-4a7c-8e83-d63a551a9b8f
    09/16/2014 10:41:45.03  w3wp.exe (0x208C)                        0x1814 SharePoint Foundation        
     Monitoring                     b4ly Medium   Leaving Monitored Scope (Request (POST:http://sqlsp:80/disc/_layouts/checkin.aspx?List=%7B5219EA15-A36A-4162-A188-4B8D518D7E79%7D&FileName=%2Fdisc%2FJigs%20and%20Fixtures%2FJigs%20and%20Fixtures%2FAssembly%2F30%20Assembly%2DGeneral%2FJ30XXA50%2D00%2Easm&IsDlg=1)).
    Execution Time=182.518658097607 88fb3615-c87c-4a7c-8e83-d63a551a9b8f

    I have fixed it.  I did a backup of the database and log file 2 times. I also did an upgrade-spcontentdatabase command in the sharepoint powershell.  Not sure why it worked, but I had read online about upgrade issues from WSS2 to WSS3 to 2010
    and I thought maybe something did not fully get upgraded even though this has been in use for 2 years since the upgrade.

  • I can't used my applications on the Imac it shows a screen telling me that the app is not valid for it, but im sure it is because i had it for a long time in my macbook

    i can used any app, but im specially concerned about one i use the most. It shows a screen telling me that the app is not valid but im pretty sure it is

    Older apps which were not written for Intel Macs will no longer work in 10.8 and newer versions of OS X.
    Matt
    Matt,
    Actually it's 10.7 and newer versions of OS X.

  • WSDL URL is invalid or the WSDL file is not valid or incorrect

    Hi All,
    I am using Oracle Soa Suite 11g. I have got Oracle database, Oracle weblogic admin server, Oracle SOA server all installed on my laptop.
    I have deployed a sample BPEL process. When I am trying to test the process it is giving an error
    "Either the WSDL URL is invalid or the WSDL file is not valid or incorrect. - WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "http://KSNPavan-PC:8001/soa-infra/services/default/MyHumanWorkFlowSample1Project/vacationrequestprocess_client_ep?WSDL", caused by: java.net.ConnectException. : java.net.ConnectException: Connection refused: connect "
    Now, when I change the url address to
    "http://localhost:8001/soa-infra/services/default/MyHumanWorkFlowSample1Project/vacationrequestprocess_client_ep?WSDL"
    (Please note the difference in host name from KSNPavan-PC to localhost.)
    and click parse wsdl it is working well. I mean the test page is opening successfully and I am able to test the service.
    Testing the service from admin console is fine. Now I want to use this BPEL process service in another BPEL process. So, when I am piciking this service wsdl in JDeveloper it is throwing me the same error and I am unable to go ahead.
    Can anyone please tell me whetherI have to set property in the admin server console so that it always take local host in all the wsdl urls and solve my problem.
    Thank you,
    KSN Pavan.

    Hi All,
    My problem has got solved with the help of my colleagues. Actually the problem was that the host name KSNPavan-PC is not there in the C:\Windows\System32\Drivers\etc\hosts file. I Added the host name in the file with the IP same as that of local host and everything isworking well now.
    Thank you,
    KSN Pavan

  • Either the WSDL URL is invalid or the WSDL file is not valid or incorrect.

    Hi ,
    i deployed one bpel process in weblogic.
    when i am click on test below is error is coming. ( its on oracle soa 11)
    below is coming for all the process. previously it is working fine.
    Either the WSDL URL is invalid or the WSDL file is not valid or incorrect. - WSDLException: faultCode=OTHER_ERROR: Failed to read WSDL from http://xxxx:8001/soa-infra/services/default/ReadJMS/readtraxjms_client_ep?WSDL: HTTP connection error code is 503
    Please help me how it is resolved.
    Regards
    jan

    Hi Jan,
    We had the same issue in 11.1.1.3 and we used to restart the server to fix it. Hopefully before going to PROD we upgraded to 11.1.1.5 and next time we saw this issue was only when there was some problem with the OHS (it was down etc.).
    Which version you're on?
    Regards,
    Neeraj Sehgal

  • The URL is invalid. It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.

    Hi all, 
    I'm having this issue on all document libraries when editing its properties, and it is also happening when creating new sub site (when it tries to provision the homepage). This issue is happening in a site collection that was migrated from a SharePoint 2010
    environment. 
    I have investigated every single error message, and none of the search results I found on the web helped, including the issue with having multiple column names mapped to the same database name ("@tp_Editor" error below). The file exists and it
    gets added to the document library but it fails when updating it's properties. 
    Here is logs from the ULS logs related to this issue:
    <nativehr>0x81020030</nativehr><nativestack></nativestack>The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
    SPRequest.AddOrUpdateItem: UserPrincipalName=i:0).w|s-1-5-21-1739618301-713299677-2434533842-6675, AppPrincipalName= ,bstrUrl....
    Non-version conflict error in RunItemEventReceiverExProps.  Exception: Microsoft.SharePoint.SPException: The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the
    current Web. ---> System.Runtime.InteropServices.COMException: <nativehr>0x81020030</nativehr><nativestack></nativestack>The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a
    valid file or folder that is not in the current Web.    
     at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
    pbstrGuid, Guid 
    Exception while assigning Document ID: The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
    Failed to get output parameter, HR: 0x80131509, Native stack:
    [Forced due to logging gap, cached @ 01/31/2014 16:45:19.56, Original Level: Verbose] Invoking EventReceiver - [Id: {0}]
    System.Data.SqlClient.SqlException (0x80131904): Parameter '@tp_Editor' was supplied multiple times.    
     at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)    
     at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)    
    SQL error code from last error 8143 - Parameter '@tp_Editor' was supplied multiple times.
    <nativehr>0x81020030</nativehr><nativestack></nativestack>The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.
    SPRequest.AddOrUpdateItem: UserPrincipalName=i:0).w|s-1-5-21-1739618301-713299677-2434533842-6675, AppPrincipalName= ,bstrUrl=http://
    System.Runtime.InteropServices.COMException: The URL 'test/sdfsdfsdf.docx' is invalid.  It may refer to a nonexistent file or folder, or refer to a valid file or folder that is not in the current Web.   
     at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, 

    It sounds like you have an Event Receiver attached to your library that might be throwing an internal error and blocking the file from being uploaded. The following errors state that the file that SharePoint thought was uploaded actually wasn't. I would
    focus on what is happening within the event receiver.
    Dimitri Ayrapetov (MCSE: SharePoint)

Maybe you are looking for

  • Macbook Air random freeze and reboot, plus other problems

    I've had my Macbook Air for about 6 weeks and am having several issues. It is the 13" model, special ordered with 8GB of ram so it came straight from the factory. I copied all my data over from a mid-2010 15" Macbook Pro using migration assistant, an

  • Batch Replace Smart Object With Different Image Quality and Sizes

    Hi there, I need help. I have this template that is in 1000x1000pixel and 300 dpi. I'm trying to replace the smart object inside with various JPEG that I have. These JPEG comes in large image sizes but lower than 300dpi. The issues is, when I run the

  • "No disk in drive" warning

    Whenever I plug my iPod nano into anyone of my USB ports I get a warning window come up that won't go away, "Warning- There is no disk in drive. Please insert a disk into drive." I click "Cancel"..it comes back, I click "Try Again", it comes back, I

  • Connecting macbook to lcd

    would be great if somebody could help me... i connected my macbook to my lcd-tv and in the beginning it worked really good, but out of a sudden, i saw only the blue sky on my ty, without any items or files on the desktop. i just see the desktop now.

  • SSLVPN in IE 8 or 9 does not display login page

    Hi all, I have a working setup with a customer using UC560 that uses SSLVPN and it works but only when using other browsers like Firefox and google chrome, when we try using IE version 8 or 9 we get prompted about the security certificate (the usual,