Showing numbers of received blocked calls

Receiving a lot of harrassing "blocked: calls - Is there a code to enter so the number shows!?!?!

http://www.trapcall.com/

Similar Messages

  • Can you increase the size of the photo that shows when you receive a call from a contact

    Can you increase the size of the photo that shows when you receive a call from a contact ?

    It used to be if you added the contacts photo on the iOS device they would have a large picture and if you added it from Address Book on OS X they would have a smaller thumbnail.  However, since iOS5, all I've been able to get is the larger photo.  Try adding the picture directly in the contacts app on your device.  That should make it larger.

  • Dialpad not showing numbers pressed during a call

    During a call ( eg: automate service call, the one which require you to press certain number during a call ),
    when I press the numbers on the dialpad,  the numbers won't display on screen.
    The numbers I press actually goes thru the line, because the other side of the phone line does responds correctly to the number I pressed.
    Also, I can hear the dial pad touch tones.
    I also have a Xperia Z, and the numbers show up fine.
    It's not the proximity sensor problem. The sensor works fine.
    I've tried Force Stop the dialer app, restart the phone ( normal power off and turn off by the little button next to the sim card),
    all doesn't work.
    I don't want to Factory reset yet, because I don't want to lose all setting and data.

    If clearing the app data does not work then please do try a software repair:
    1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
    and install it on your PC.
    2. Install and open PC Companion then select Support Zone.
    3. Phone Software Update.
    4. Start.
    5. Repair Phone
    6. Continue
    7. Accept data removal
    8. Next
    9. Wait for prepare
    10. Select Phone
    11. Follow the connection steps
    Don't forget to mark posts that answers the topic as Accepted Solution. 
    If you find any post helpful, press Kudos.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • HT4623 How can I receive blocked calls on my phone

    I am a hospital driver.  The hospital number is a withheld number.  They cannot leave voicemail messages for me.

    That's between you and your carrier. The phone does not prevent any caller, regardless of the caller ID information, from leaving a message. Voicemail is strictly a carrier feature.

  • Incoming Blocked Calls not appearing on my phone bill

    Hello -  I have recieved several blocked calls, however they don't appear on my phone bill. Why is that? How can i get a record that i received blocked calls? Best,  ML

    You might want to read a bit about FaceTime and look through the iPhone user guide. It may save you some time and frustration because many of these basic questions are answered there.
    https://www.apple.com/ios/facetime/
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

  • I have an iphone 6.  The ringer doesn't make a sound.   I have tested the ringer and it sounds however when I receive a call or text or email the ringer is silent

    I have an iphone 6.   The ringer remains silent when I receive a call, text or email.  It shows I am receiving a call on the screen but there isn't any sound.  I cannot figure out what is wrong.

    If you've checked the mute switch as razmee209 has suggested and it's not enabled, the next thing to check would be Do Not Disturb. Do you see a small crescent moon in the status bar? Check Settings>Do Not Disturb and turn it off.

  • How can we encourage Apple to develop blocking calls from specific numbers?

    Looking through posts on here, I see that neither AT&T nor the iPhone itself permits an iPhone owner to block calls from one or more specific numbers.
    For some reason, although I've had my mobile number for years, I've recently started to receive daily calls from one specific number, an ignorant person who calls at all times of the day and night, barely apologizing for yet again dialing incorrectly. Very annoying.
    Yes, I know I could change my number, but literally hundreds of people have used this number for years, and I'm truly loathe to start over.
    In reading posts here and on AT&T, I gather this is not an uncommon problem. I assume that even if AT&T is unwilling to institute call blocking, this is a problem Apple could solve with iPhone software. What's the best way to encourage Apple to include this in a future iPhone software update?
    In advance, thanks for your guidance.

    This would be something ATT would have to do since they provide the actual phone service.
    In the meantime, you could create a ringtone of "silence" and assign it to that person's number. This way you wouldn't be disturbed when the person calls until you can work out a solution with ATT.

  • Why did contacts suddenly show numbers instead of names on calls and messages?

    My calls and messages stopped showing names and started showing numbers instead? Why?

    On verizon dial *228 to setup.

  • After updating to iOS 7 the contact photos no longer appear when I receive a call. How can I get them to show again?

    After updating to iOS 7 the contact photos no longer appear when I receive a call. How can I get them to show again?

    I'm having the identical problem on my iPhone 4 after upgrading to IOS 7--no ability to update apps or download new apps.  Here is what Apple tech support emailed to me:
    I understand that you are unable to download or update applications after updating iOS7 on your iTunes. I know you must be eager to get this resolved and I will be happy to help you today.
    ... to help you better with this issue I would request you to please try this steps given below to resolve your issue.
    Please follow this steps:
    1) Double tap the home button
    2) Hold down on an icon
    3) Tap the red "X" on iTunes, and the App Store.
    4) Tap Settings > Store > Tap your Apple ID, and choose sign out
    5) Tap Settings
    6) Tap General
    7) Tap Reset
    8) Tap Network Settings
    Once it has been closed with multi-tasking, and you have rebooted the device in the network settings reset, please sign in, and try again. 
      Howevr, if you are facing the same issue than for this issue, you may need to call our AppleCare technical support team. A technical Advisor will be able to tell you about Apple's complimentary and fee-based support. The technical Advisor can also assist you in determining what option might be most helpful to you in this case.
    Mildly amusing that the instructions for force-closing a program are the IOS 6 instructions, which do not work on IOS 7. 
    Otherwise I'm having a little success with this.  Some apps (not all) are updating. It seems that a few more apps update each time I go through the process (close everything, sign out, and either reset or reboot, then go to the app store, sign in and try to update all).  So far it has been a very lengthy, iterative process. 

  • How do I get my number to show up as a blocked number when I call

    HOw do I get my number to show up as a blocked number when I call someone

    I think you want to simply hide the caller ID and be anonymous, not "be a blocked number" because you wouldn't be able to call anyone.
    Back when I did that, I dialed *70, waited for the next dial tone, and dialed normally. I forget which carrier that was. Verizon is *67 these days.
    Search for "Verizon block caller ID" for example. Verizon has a page and I'm sure the other carriers do, too.

  • My personal ringtones are on my iPhone 5, they are attached to the correct phone numbers and play correctly when I test them on each contact.  But when I receive a call instead of the proper ringtone, it plays the generic.  What Am I not doing right?

    My personal ringtones are on my iPhone 5, they are attached to the correct phone numbers and play correctly when I test them on each contact.  But when I receive a call instead of the proper ringtone, it plays the generic.  What Am I not doing right?

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • HT1349 my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

    my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

    If you are not showing reception bars, then I don't know how the data is working? Have you tried doing a reset? Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check to see if it works. If that doesn't help, then try removing the SIM card, then reinserting it. If that doesn't help, then contact your carrier for assistance in calling.

  • I keep putting in my passcode but my iPad won't show the numbers in the blocks and it won't open.  I have tried double tapping in the numbers

    I keep putting in my passcode but my iPad won't show the numbers in the blocks and consequently it won't open for me. I have tried double tapping in the numbers and then it shows the numbers in the blocks correctly but then it responds with a wrong code in red and then locks me out.
    Typing in the code takes a long time which might indicate a full HD.

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I updated my iphone to iOS 6.0.1but it doesn't show the contacts names when calling or receiving calls. What to do?

    I updated my iphone to iOS 6.0.1but it doesn't show the contacts names when calling or receiving calls. What to do?

    This may be an error caused by the update. You can try to sync your contact information with iCloud and backup the rest of your data and then restore the device and see if it starts to work normally again.

  • HT5463 Can you block calls from certain numbers

    Can you block calls from certain numbers

    You can also make a contact for those numbers and assign a silent
    ringtone to them. The calls will still come in, but you will not hear them
    and they will eventually go to vocie mail if you have it set up.
    You must do this for each number as wildcards are not accepted in
    Contacts, but all the numbers can be listed in one contact.
    As Ocean20 has stated above, true call blocking is a function of
    your wireless provider.

Maybe you are looking for