Showing pictures iphone 4 only portrait mode

Hi, when I look at pictures in my Ipone 4 they only show up in portrait mode. It vill not work "turning the phone" showing the pictures in landscape. This goes as well for writing sms etc, only possible in portrait mode. ANy idea about the problem and how to solve it?

Orientation lock is most likely on. Double tap the home button...swipe left to right...far left is the orientation lock button...tap on/off.

Similar Messages

  • Quick-time film doesn't show picture, sound only!

    Repeatedly quick-time film doesn't show picture, sound only! This happened after an update some time ago. The current version is 7.7 PRO under MAc OS 10.5.8. Very annoying...!!!!!!

    Use the Movie Inspector window to tell us more about one of these files.

  • HT4623 i have pressed start to install updates, but now my iphone 4 will not stay on, screen showing picture of cable & itunes sign when i attach to computer it only ask me to restore to factory setting and i dont want to lose my photos ect, Thanks Angela

    i have pressed start to install updates, but now my iphone 4 will not stay on, screen showing picture of cable & itunes sign when i attach to computer it only ask me to restore to factory setting and i dont want to lose my photos ect,
    Thanks Angela

    Your phone is in recovery mode.  All your data are already gone.

  • IPhone 6 - I can only send photos via iMessage in landscape mode. The address line disappears when I try to send a portrait mode photo.

    iPhone 6 - I can only send photos in landscape mode via iMessage. The address line disappears when I try to send a portrait mode photo. Gone so far as erasing all content and settings. Problem persists.

    Howdy jackbry,
    Welcome to Apple Support Communities.
    If you haven’t already, you can try resolving the issue with not being able to send iMessages that contain portrait photos by restoring your iPhone to factory settings as shown in this article:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    So long,
    -Jason

  • I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

    I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

    You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
    Restart phone
    Reset phone
    Restore in iTunes using a backup
    Restore in iTunes as new, without using a backup
    If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

  • I want to show pictures from my iphone 4 on my television.  I have the cables but it will only show a few pics stored online, none of those on the camera roll.  Would it make a difference if I upgraded the ios to ios 7?

    I want to show pictures from my iphone 4 on my television.  I have the cables but it will only show a few pics stored online, none of those on the camera roll.  Would it make a difference if I upgraded the ios to ios 7?

    1, iOS only works on iPhone, iPads or iPods. These drives were probably made with an operating system that preceeded OS X such as OS 7, OS 8 or OS9.
    2, No, the data on the Zip Drives is formatted for the Mac.
    3, If your reformat them then all of the data is wiped
    4, The problem would be that the PC can not read the files as formatted on the zip drive by the Mac
    5, There are services that might be able to migrate the data for you but I seriously doubt that Staples or Office Max can do it for you. The services that migrate data charge big bucks so be prepared to pay for it.
    Allan

  • Is there a way to create and edit a video in portrait mode / 9:16 in Premiere Elements 12 or 13. Playback on an iPhone in portrait position.

    I'm editing iPhone app video for posting as the first screen in the Apple app store. Required size for the video is 750:1334, 9:16. I there a way to setup the initial video in portrait mode? Many posts for how to rotate a specific clip, but I need the whole video in portrait position. How to accomplish this? I'm using Windows 7 and Premiere Elements 12 and now 13.

    LaurieFrick
    Thanks for giving this portrait Edit area monitor shape a look.
    I have Windows 7 64 bit and Windows 8.1 64 bit and have done the work using Premiere Elements 12/12.1 on Windows 7 64 bit.
    Here is a step by step
    Find the DSLR [email protected] file
    Local Disk C\Program Files\Adobe\Adobe Premiere Elements 12\Settings\SequencePresets\NTSC\DSLR\1080p\
    And, in that 1080p Folder is the DSLR 1080p30@ 29.97.sqpreset file that you seek.
    1. Copy the
    DSLR 1080p30@ 29.9.sqpreset fileI
    and paste it to the computer desktop in a newly created folder named 1920p.
    2. Open the 1920p Folder and edit the ..sqpreset file in Notepad.
    To do that right click the .sqpreset, and, from the pop up, select Open With and then Notepad.
    3. In the Notepad document, you are going to edit in only 2 places for now, switching 1920 and 1080 to 1080 and 1920 at the top and bottom
    sections of the Notepad document.
    Then go specifically File Menu/Save of the Notepad document and hit Save.
    4. At this point, you have the edited.sqpreset file in the 1920p Folder on the computer desktop.
    (Change the name of the edited .sqpreset file so that it = DSLR [email protected])
    Move the 1920p Folder from there to add it to the 1080p Folder, the location where you found the original .sqpreset file that you edited.
    Close out of there.
    5. Back in the Premiere Elements 12/12.1, manually set the project preset to the new project preset
    6. When you import your 1080 x 1920 9:16 video file into the project and drag it into the Timeline, you should see
    Note that there is no orange line over that Timeline content, indicating that you are seeing
    the best possible preview of the image.
    7. As I wrote before,
    But, here is the hang up. If I render the Timeline content to get the best possible preview at the Edit level, the video in the Edit area monitor
    squeezes in resulting in black borders to the left and right of the video image on screen.
    But, otherwise I found I had no problems editing or exporting, just had to keep away from Timeline rendering for previewing after an edit. Need to find the missing ingredient for 100%.
    I will be writing this up in my blog in a more organized fashion including how I got the project preset description in Change Settings to agree with the changes. Probably I will do that in the morning.
    ATR

  • When I save photos or videos from my iPhone 4S to my PC they are all sideways.  Is there a way to prevent this from happening?  All are taking with the phone in portrait mode.

    When I save photos or videos from my iPhone 4S to my PC they are all sideways.  Is there a way to prevent this from happening?  All are taken with the phone in portrait mode.

    Shot videos ONLY in landscape. For photos choose what's you like. Maybe you have to rotate photos on PC. What's your operating system?

  • My iphone says i have 6.1gb photos in photo library. over 1000 pictures. i only have 60 how do i dlete these?

    my iphone says i have 6.1gb of photos on my photo library, 1000 pictures. i only have 60. how do i see and delete these pictures?

    On iO8 8?  If you have already emptied the Recently Deleted album,and still have phantom photos,  check this post:
    Have a look at this solution:  There are apparently more users suffering from phantom photos that cannot be deleted:  Changing the date makes the photos in "Recently deleted" visible again:
    txforeverMar 5, 2015 6:38 PM Re: More photos in settings than photos app shows
    Re: More photos in settings than photos app showsin response to morganfaith6
    I managed to get rid of the phantom usage. Restoring iPhone and resetting the phone settings/data do not work for me.
    I had to move the Date on my phone earlier by 1,2,3 months and found the phantom photos in the Recently Deleted Folder. Next, I deleted the photos manually from the Recently Deleted Folder and the usage got freed up from my iPhone.

  • IPhoto shows and imports triplicates (triple duplicates) of iPhone photos – On iPhone only single photos shown

    I recently plugged in my iPhone, only to see that when the contents of the device were shown in iPhoto, there were triples, or "triplicates" of every photo (this put the total around 10,000 photos). Meanwhile, on my iPhone's Photos app, everything looks normal with only single photos being shown.
    I toiled over how to remedy the problem, and found I had no other choice but to spend the MANY hours syncing thousand upon thousands of duplicate photos/videos to my iPhoto library. I then broke down and purchased Duplicate Annihilator to clean up my now ruined library. Because iPhoto made all those duplicates, the file size compounded into many gigabytes. Duplicate Annihiliator had to run for hours before finally cleaning things up. It did it's job well, however the root of the problem still remains.
    At the conclusion of transferring my entire library of photos from iPhone to iPhoto, I had the photos removed from the iPhone so I could start with a clean slate. I took a few sample photos and plugged the iPhone back in to iPhoto. Yet again, the dreaded triple duplicates, or "triplicates" of each photo I took show in the device preview window (i.e. I took 5, non-HDR photos, and 15 are shown—each repeated three times). If I proceed to import the collection, it imports triple of everything into my library.
    Essentially, my situation now is: I have to import multiple copies of everything (takes longer), then I have to run Duplicate Annihilator each time to keep my iPhoto library from being a mess. Just wastes tons of time. How can I keep iPhoto from showing and importing all these multiple copies every time? Again, on the iPhone end, everything looks normal—only a single copy of each photo.
    What I have tried:
    Closing/restarting iPhoto
    Checking for iPhoto updates (there are none, I'm on the latest version—which, as of this writing, is 9.2.3 629.52)
    Deleting com.apple.iPhoto.plist from ~/library/Preferences/
    Using Image Capture (triple duplicates still show in IC as well)
    Disabling Photo Stream
    Removing all photos and albums from iPhone

    I am seeing this problem still, even after trying the Photo stream toggle trick that was mentioned. I have one otehr observation to add.
    If I "Command"+select the first of each photo in iPhoto and then import those (choosing to Delete after import), then the next refresh of iPhone pictures oniPhoto will show all the photos (including the duplicates) gone. So basically something like this.
    1) iPhoto - I see triplicates of pictures on my iPhone.
    2) Command+Select the first instance of each duplicated picture.
    3) Import the selected pictures. Choose to Delete the pictures after import.
    4) Go back to iPhone in iPhoto. No more duplicates of the pictures I imported.
    So this doesn't fix the problem as all the unimported photos still show triplicates, but al least I don't have to run a de-duper on my laptop now to eliminate triplicates.
    This eliminates some of the hassle, but it's still a hassle.
    I hope someone figures this out completely because it's making me hate iPhoto just a little bit.
    Song

  • Video recorded in landscape only plays in portrait mode on HD tv

    I recently obtained iphone 5s. I've recorded several videos with the phone, in landscape mode. When I try to play the videos connected to my tv via HDMI A/V cable the videos will only play back in portrait mode (quality is distorted and horrible).
    Same goes for the videos recorded in landscape mode on my old 4s (which prior to IOS 7 would play back in proper mode).
    Phone is not locked in portrait mode.
    Video will play on phone in landscape mode...just won't play in landscape on the TV.
    Hope this makes sense. Thanks for any assistance!
    D.

    I had the same exact problem.  Some of my landscape videos would get squashed into a portrait size view on the TV. 
    What I did as a workaround was to hold the phone in portrait mode, play the landscape video, and if it didn't fill the screen correctly, I would swipe the video as if I was going to another video/photo, but without lifting my thumb/finger, swipe it back so that it returns to the original position. 
    What happens is that the video on the TV screen should resize into a smaller landscape image (with the circle play button in the middle of the image).  Then usually when I hit the play button again, it will play properly in landscape mode and, more or less, fill the screen properly.
    I find it odd that so few others have faced this issue.

  • Iphone 6 won't lock into landscape mode, keep switching back to portrait mode

    Hi,
    Please help me, this has driven me nut, I can't seem to lock my iphone 6 into landscape mode, it will only lock my screen when I am in portrait mode.
    For example, if I open safari and turn my phone sideway, safari would turn into landscape mode, and if I want to lock my screen to keep it in landscape mode, it won't do it, as soon as I select that screen lock button, it will turn back to portrait mode and lock my screen up into portrait mode.
    What should I do to keep my screen lock at landscape mode??? I have tried this with several apps and the same thing happen, like in Calculator, when I turn it sideway and try to lock it, it goes right back to portrait mode.
    I restored my iPhone 6 from my iPhone 5c so just wonder if it has anything to do with that or just some bugs in iOS8???
    My current display is in Standard and not Zoom display, and I even try to set it as Zoom and then reset it back to Standard to try to see if it works and it still doesn't work.
    HELP ME!!!!

    I Just spent over an hour with support on this issue and apparently in iOS 8 they removed the option for the phones to lock in landscape mode. So, there is nothing wrong with your phone, unfortunately they removed a very useful feature.  Maybe they will see if enough users want it they will fix it in an update. 

  • Movie attachments only play in portrait mode?

    When I play an M4V movie from iTunes or even clicking on a M4V link in a URL, my iPhone will automatically default to landscape mode and play the movie. If I rotate the phone, it will switch to portrait mode.
    When someone sends me an M4V as an email attachment, it will only play in portrait mode.
    Is this a bug or are email attachments treated differently than other movies?

    Did you check System Preferences > Displays (with the external display attached and mirroring off, look at the preference pane _on the external display_.
    See this linked image (although it's from Tiger, the preference should be there).

  • HT1267 iphone only showing the apple icon I have done the home button with the sleep to restart it but it's not doing anything

    can't locate the serial number the phone only shows the apple icon I charged it. I will only show the apple icon?

    If you decide that you want to Restore the iPhone Firmware then. Open iTunes on computer, connect iPhone to computer with USB cable. Hold both home and power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button for about another 20 seconds, until iTunes recognizes the iPhone in Recovery Mode. If the iPhone screen is black this is good. Restore the iPhone Firmware. If you get Recovery Mode but the iPhone shows the iTunes screen you can try to Restore, but if it fails, do the instructions again until you get Recovery Mode with black iPhone screen.

  • HT201263 I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. I tried to charge and not charging. What I should do now?

    I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
    What I should do now?

    Something has gone wrong. Turn your phone off, then force it into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".

Maybe you are looking for

  • Unable to capture VK_TAB in JTable

    Hi, One of our application screen contains a JTable. The problem in this screen is whenever the user press TAB key, the event is not gettting triggered. I have confirmed this by writing s.o.p in the ActionListener class. All the KEYS are getting fire

  • Error while installing SAP NetWeaver 7.01 ABAP Trial Version

    Hi Experts, While installing the SAP NetWeaver 7.01 ABAP Trial Version on my pc (Vista) getting the below error. (Sep 26, 2010 10:30:07 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNS

  • @XmlRootElement is not getting creating while binding XSD

    I am trying to bind XSD using XJC binding compiler (JAXB RI 2.0). While creating Java classes, it is not adding the annotation @XmlRootElement. Because of this I am facing errors "@XmlRootElement missing" while marshalling and unmarshalling the XML d

  • Error when sending INVOICE01 iDoc to SAP R/3 system

    Hi, I was trying to send an INVOICE01 iDoc to SAP R/3 system. I checked the iDoc list (transaction code we02), the iDoc I sent was in the status 51 with the error message as "Program parameters LS <Logic System Name> <Company code> have not been set"

  • No picture on the samsung digital tv w g5 set to mirroring

    I am trying to "mirror" the g5 display onto a samsung ditital tv. connected with a dvi/hdmi cable. tv shows "no signal" message. Help? Hugh Cain Cedar Rapids Iowa