Showing the incorrect qty on the MRP
hi gurus,
PO 450000####, total qty for 15M pcs, received a partial of 2,400 pcs. On the MRP still shows the total qty of 15M. Same with PO 450000#### same scenario. 1/27:
Regards
NNeeti
Dear,
As far as I know and predict,
Check the Goods receipt...
1. If 103 for blocked stock - MRP will nto consider this quantity as received.
2. If GR processing time less than the GRN time. For example GR processing time set as 4 days and GRN done within this days, MRP will not consider this as closed quantity due to no further procurement orders raised.
Regards,
Syed Hussain.
Similar Messages
-
Is there a way to track the delivered qty at the schedule line level in R3
Hello Gurus,
Is there a way to track the delivered qty at the schedule line level in R3. I spoke to al ot of functional guys on this and the answer is NO. If NO,then, how does the 2LIS_11_V_SSL extractor extract the delivered qty at schedule line level. Help is really appreciated.
Thanks
SimmiHi Simmi,
I have used this extractor for the purpose you describe at more than one customer without problem. My understanding is that it links the order schedule line with the delivery, but I haven't tried to work out the mechanism.
Regards,
Ken -
102 combines all the GR qty for the same part # line item in the PO
I had a question on the behavior of movement 102 in SAP
In earlier versions, SAP combines all the GR qty for the same part # line item in the PO both in MIGO & in MB01.
Is a change in functionality in ECC which combines all the qty or is there any config that we are missing?Hi,
Check your PO item details....is there GR based IV active in your current PO? I know, it should have effect on LIV only but, still trying to see a possibility if it has any impact on GR reversals too....
Regards
Message was edited by:
Gopala Turaga -
Restricting the return Qty to the Original Invoice qty
Dear Friends,
When i'm copying the data from the Invoice to the return sales Order.
I want to restrict the quantity of the Return Sales Order to the Invoice quantity...
Please tell me how i can restrict the Return quantity to the Original Invoice quantity.
Thanks
UwanthiHi
Welcome to SDN
When i'm copying the data from the Invoice to the return sales Order.
I want to restrict the quantity of the Return Sales Order to the Invoice quantity...
T code OVAH message number V4--229 change this message from warning to error
This will take care of your issue
Regards
Raja -
Calcuation the BOX qty by the Delivery Note item level .
Dear all
I have face a problem in the delivery notes pack function
for example
DN =20001 , have 2 item,
item A , qty = 10 pcs
Item B, qty = 20 pcs
when to do the DN pack, item A 10 pcs put into 2 box,
item B , 20 pcs put into 4 box,
in the DN header , " LIKP-ANZPK " can show the total box qty = 6.
But I can't found the total item box in DN item level .
Because we need print the subtotal box qty in each item level .
Does anyone have experience to solve this issue ?
Thanks.Check by passing Delivery number (VBELN) and Delivery item (POSNR) to table VEPO and fetch VEMNG (Base Quantity Packed in the Handling Unit Item).
-
Incorrect value in the dynamic table.
Hii,
I am new to abap, i wrote a program which is showing dump " Incorrect value in the dynamic table." .
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it come across a statement that unfortunately cannot be executed.
pls help me to solve this issue.
REPORT zBLOCKED_ALV.
*tables: ekko,ekpo.
type-pools slis.
parameters porder like ekko-ebeln.
data: i_ekko type table of ekko,
i_ekpo type table of ekpo,
fieldcat type slis_t_fieldcat_alv,
keyinfo type slis_keyinfo_alv.
clear keyinfo.
keyinfo-header01 = 'ebeln'.
yinfo-item01 = 'ebeln'.
select * from ekko into table i_ekko where ebeln = porder.
select * from ekpo into table i_ekpo for all entries in i_ekko
where ebeln = i_ekko-ebeln.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = sy-cprog
I_INTERNAL_TABNAME = 'i_ekko'
I_STRUCTURE_NAME = 'ekko'
CHANGING
CT_FIELDCAT = fieldcat.
refresh fieldcat.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = sy-cprog
I_INTERNAL_TABNAME = 'i_ekpo'
I_STRUCTURE_NAME = 'ekpo'
CHANGING
CT_FIELDCAT = fieldcat.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = sy-cprog
IT_FIELDCAT = fieldcat
I_TABNAME_HEADER = 'i_ekko'
I_TABNAME_ITEM = 'i_ekpo'
IS_KEYINFO = keyinfo
TABLES
T_OUTTAB_HEADER = i_ekko
T_OUTTAB_ITEM = i_ekpo.Hi,
You have to pass 'EKKO' and 'EKPO' i.e in caps to the exporting parameter I_STRUCTURE_NAME of the function module
'REUSE_ALV_FIELDCATALOG_MERGE'.
I think this would work, if not pls let me know.
Thanks,
Radhika -
How to restrict the PR Qty not exceed in the PO.
Hello experts,
Need a small help from you.
I have a PR manually created thro ME51N say qty of 100 Units.When i make PO for that PR of 100 unit,i give more than 100 units in PO.but still system is not throwing an error.my requirement is want to restrict the PR qty in PO,like it should not exceeds the PR qty in the PO.
How to configure this if PR qty exceeds in the PO system should throw an error.
Ur reply would b highly appreciableHi Vijay
Go To SPRO--MMPurchasing-Environement Data---Define Attributes of system messages.
There try to put E against message no. 076.
Regards
Yogesh -
Reversal voucher for an invoice paid to the incorrect PO Number
Hi, We have paid some vouchers to the incorrect PO number. I thought we could do a reversal voucher against the incorrect voucher, then the PO would be open to apply the correct voucher to it. It appears the receipt is not backed out. Has anyone used this function and could guide us in what needs to happen.
Hi
I guess you receive different invoices for both the POs. The process of raising a credit memo is the best way to solve this issue. Did you think about cancelling the Invoice document in MR8M if it is feasible, here this will affect your stock accounts based upon the current stock position for the said Invoice/PO quanity.
One more additional check you can have is to use to activate the check box "check doubel invoice" below Tolerance Group in the Vendor payment Transactions Accounting view of vendor master. This will help you to restrict the entry of wrong PO attached to the invoice if you have already processed the Invoice (provided you are using the reference field in MIRO by entering the INVOICE number of the PO).
Regards
SAM -
Issud qty is greter than the Reservation qty
Dears,
I Have creted the Resevation 100 qty for cost center 1.
While i am issuing the qty to cost center system is allowing more qty than the reserved qty100.
Even if i given the 200 qty system is posting the Document .
How Avoid this Posting and where i ahve to cofigure the System setting please Guide Me.
If i am issuing the More qty than the Reserved qty systemm should give the Error message.
Like issued qty is more than the Reserved qty .This can be controlled by setting the messages to Error in the Relevant application area.
Go to SPRO-MM-Inv Mgmt & Phy Inv-Define attributes for System messages / use trxn code OMCQ and find the Relevant message number and set to Error and Save.
Also Check in SPRO-MM-Purchasing-Environment-Define attributes for System messages / use trxn code OMC0 (trxn code may not work) and find the Relevant message number and set to Error and Save.
Eg : 06 078 Target quantity exceeded by & & etc -
Can I use SD_DELIVERY_UPDATE_PICKING to change the delivery qty?
hi experts,
I have used SD_DELIVERY_UPDATE_PICKING to updating the picking quantity in a delivery document and post goods issue. also want to use the FM to change the delivery qty ,when the picking qty < delivery qty ; and do the post goods issue automatic .
and i find the field :
VBPOK-LIANP *Change delivery quantity
i do like this ,when VBPOK-LFIMG > VBPOK-PIkMG ,
VBPOK-LIANP = 'X'.
VBPOK-LFIMG = VBPOK-PIkMG
but the FM also can't change delivery qty.
please help me !Hi,
We need only Delivery Number and its item for picking. I am not clear with what reference number you were referring to.
Thanks, -
Invoice qty greater than the PO qty
Hi All,
I have created material PO with 100 qty Value 5000 and freight cost 1000 rs for the same Qty.
Issue: at the time Freight Invoicing with PO/bill of landing
Material: GR & IR Done for 100 qty -- No issue
Freight: when am doing invoice (MIRO) i have given Purchase Order no and paid the freight rs 1000 for whole 100 qty
Issue: If i do invoice (MIRO) by for the same PO and given bill of landing, system still proposing some qty 40 Qty and proposing some cost.. and able to save .
but it should not propose the Qty... Plz let me know how to restrict it... In case freight Invoice
ThanksHi,
not some qty... if i select the Bill of loading in MIRO, then system is proposing the whole qty for the particular item of PO.
PO:123 100 qty Fright cost 10 value 10000 Bill of Loafing:XYZ
MIRO-Delivery plan: Done With PO whole Qty 100 freight cost 10rs value=1000 rs
If i select :Bill of loading XYZ (Same PO and same item).. system is proposing same Qty 100 and value 10000..
Thanks -
I have been having an issue with iTunes match pushing song titles to my iPhone and iPad but am not able to play the music on my iPhone. All that I get are greyed out song titles. Thinking restoring my iPhone would help, I proceeded with the restore but after it downloaded I got an error message that my firmware was the incorrect version for the software and ended without allowing me the option to update the firmware. How do I do the update? Could this explain the issue with iTunes Match?
How to update iOS
-
After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?
If you change your email, you do not need to "change" your AppleID. Just edit your email(s) on your Apple ID by logging in to your AppleID account. You should always use the same AppleID for Apple Services (iCloud, iTunes etc) and multiple ID will cause problems and confusion in the future.
You can manage your Apple ID here:
https://appleid.apple.com -
i have a birthday showing in my calendar listed as an all day event and it is incorrect how can I delete it. When clicked on does not bring up the edit feature. The vodaphone shop thinks it has synced with my facebook app.
hello, the addons manager is exactly the right place to look for it. please try disabling the addons that are listed there one-by-one (a restart of the browser might be necessary after each step). maybe one of them is bundling this kind of adware.
[[Disable or remove Add-ons]] -
My iPhone has the correct Apple ID for everything BUT iCloud. How do I change that. Going through Settings shows the incorrect ID but it does not allow change.
Settings > iCloud > delete account
You want to keep all content on your iPhone
Resign back in
Maybe you are looking for
-
Cannot change payment method on subscription and C...
I am posting the transcript for the 45 minute chat I just suffered through. I simply needed to change my credit card as the old card had been replaced due to a security breach. Others on forums have complained about this issue but this is a stellar e
-
Firefox always used to take me to my homepage - AOL. Now it doesn't unless I click on the simplified back-up access method. == This happened == Every time Firefox opened == several days ago
-
Has anyone upgraded their existing JavaCAPS 6.2 to JavaCAPS 6.3
We are in the process of evaluating JavaCAPS 6.3. Currently our JavaCAPS is on version JavaCAPS 6.2 running on IBM AIX server. Can anyone share their experience of upgrading existing JavaCAPS 6.2 upgrade to JavaCAPS 6.3? We are planning to do an in-p
-
"network accounts are unavailable"
Hi, I just upgraded to Lion and now I cannot log in to my mac using my network account. I checked and the computer is still joined to our windows domain. Any ideas? Nothing has changed on our network so I am assuming it's a Lion issue. Thank you fo
-
When I am recording a vocal track the levels meter is well under clipping, but still quite strong; however, upon playback, it barely shows action in the meter. But, the Output 1-2 levels (which is combining all my vocal and insturment tracks) shows c