Showing the time the video was recorded on screen

Hi,
I'm making a follow-up video to a recent fire department training we had and would like to have the finished video show the times that the clips were recorded on screen.
Is this possible with imovie? If so, how?
Thanks,
Chris

Well, you could always use subtitles to show them. Click the "T" on that bar in the center on the right.

Similar Messages

  • My video was recorded on my I phone 4, the camera was held sideways for a horizontal view, but loads in I movie vertically.  How can I rotate the image so it is horizontal?

    My video was recorded on my I phone 4, the camera was held sideways for a horizontal view, but loads in I movie vertically.  How can I rotate the image so it is horizontal?

    Drag the clip from your Event to your Project. Then use the Rotate, Crop, Ken Burns Tool on the Middle Toolbar to rotate it

  • How to get the time length from send record command to record video really?

    I have two buttons. Record/Stop
    I press Record button to record the video and press Stop
    button to stop recording.Now,I spend 1986 ms from press Record
    button to press Stop button.
    But the flv file's length is 1920 or 1910 or 1915 ms.
    So I want to get the time length from send record command to
    record video really.
    Can you give me some suggests.
    Thanks!

    maybe you have lag in publishing.... are you try watch de
    NetStream.liveDelay() method?
    or start counting when NetStream.onStatus has
    "NetStream.Record.Start" and "NetStream.Record.Stop" in information
    objects....

  • Find the time a drive was disconnected

    This is not your usual case, but if there is an answer to it, this may help others. Recently I had an external drive stolen from my iMac running mountain lion. I was wondering if there is a terminal log, or something I can find that will show me the time that drive was disconnected. This will help me figure out when the theif was in my home and narrow in on the finding who it was. Yes, I believe it is someone I know. This is very important to me, and I hope there is something out there that can help me find the time this drive went offline or was disconnected. It was just removed (pulled out of the computer "disconnected"), and not ejected, so maybe there is a log of this somewhere..?
    Thank you all for your help.

    Use the Console application in Utilities and check the System log. This is the info from my machine for a disk just pulled and a correct unmount, the xxxxx just replace my machine name. Disk names may be different on your machine.
    Sep 29 15:18:07 xxxxxxxxxxxxxxxxxx kernel[0]: disk1s2: media is not present.
    Sep 29 15:19:19 xxxxxxxxxxxxxxx.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.volume.removable.unmount' by client '/usr/sbin/diskarbitrationd'

  • Is it possible to find the time a website was visited in safari history?

    Is it possible to find the time a website was visited in safari history?

    See:
    http://www.justanswer.com/computer-programming/7c5qf-iphone-settings-safari-adva nced-website-data.html

  • How do I write out the time a measurement was taken

    Hi everybody.
    I have written a VI in labview 6 which samples analogue inputs at a scan rate of about 40kHz. What I want to do is write this data to an excel sheet with the time the data was measured written out next to it?????
    I know that time info is contained in the waveform data, I just can't print it out cause it is coming to me in the form of a 1D array of waveform data???
    Thanks for any help you can give.
    Al

    See the attached example for a couple of possibilities.
    Have you tried Export Waveform to Spreadsheet File.vi? It's name is a bit misleading in that it saves the waveform data to a text file that is easily imported into a spreadsheet, not directly into Excel (or similar), but it saves time and amplitude as you describe.
    To save into Excel, you'll have to pick off the time and amplitude arrays, format them as strings, then use ActiveX commands to write to Excel cells. Search this forum for ActiveX Excel for examples.
    Tim
    Attachments:
    Waveform_Time.vi ‏42 KB

  • Hi, I just picked up my phone to check the time, and it was off, which was weird because I just checked it a minute or so before. i tried to turn it on, which didn't work, then i plugged it in, and it has still shown no sign of life.. what do i do?

    Hi, I just picked up my phone to check the time, and it was off, which was weird because I just checked it a minute or so before. i tried to turn it on, which didn't work, then i plugged it in, and it has still shown no sign of life.. what do i do?

    Try resetting it: hold the on/off and home buttons 10-20 seconds until you see the Apple logo, ignoring the off slider that appears first, then release.

  • Help help please...Photoshop CS, on a Windows XP machine.   After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this p

    Help help please... I'm running Photoshop CS, on a Windows XP machine.   After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this product I must re-activate it".  BUT the activation link informs me that they no longer support the product (neither online nor telephonically).  So how can I re-activate this software?

    Hello Helios & Eb29075,
    +1. Please check log file for error message.+
    +2. Check status of EM.+
    +3. Please see:+
    +How To Drop, Create And Recreate DB Control In A 10g Database [ID 278100.1]+
    +Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole__ not found [ID 555218.1]).+
    As you said above, yes, I did find OC4J config issue & EM Config issue and resolved them. But still I couldn't get my DBConsole started.
    Yes, I was able to drop DBConsole<sid> service using 'emca' repository drop. But, when I started recreating repository for DBConsole service, I wasn't able to do it. I tried several times but in vain.
    Thanks,
    A.P.

  • HT4528 how can i tell what time a video was taken that was sent to me?

    how can i tell what time a video was taken that was sent to me?

    Ask the person who sent it to you?

  • Have a question to ask ... I bought, at the time, the update of Adobe Audition CS6, being already in possession of the CS5.5 version. Since I had to redo the operating system (windows 7 professional 64-bit), reistallando program CS6, with the correspondi

    have a question to ask ... I bought, at the time, the update of Adobe Audition CS6, being already in possession of the CS5.5 version. Since I had to redo the operating system (windows 7 professional 64-bit), reistallando program CS6, with the corresponding serial number in my possession, I noticed a malfunction that is:
    importing a musical motif and starting the program, clicking on play, I do not play any pattern or song despite being in operation.
    I reinstalled the program, but without any result. What do I do? Thanks.

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I and my brother have different apple id's but are using the single itunes library on our home PC.When i am syncing my iphone most of the times the apps that were purchased with my brothers apple id is also getting on my iphone.

    i and my brother have different apple id's but are using the single itunes library on our home PC.When i am syncing my iphone most of the times the apps that were purchased with my brothers apple id is also getting on my iphone.
    How do i differentiate the apps that were purchased with my apple id and sync accordingly.As i want only the apps that were purchased in my apple id.
    I am aware of the fact that i can click on the app and check with "getinfo" to see with whose apple id it is brought.but there are hundreds app which i cannot check one by one.
    How do i filter the apps with apple id and sync?

    Connect the device to the computer.
    Open iTunes.
    Select the content desired to sync.
    Sync.

  • Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

    Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

    Check Finderr->Preferences->General and ensure that HDs are selected for display. If so and they still don't, Reset the NVRAM/PRAM and Reset the SMC, and see if that does the trick.

  • Is the time column in VA05 the time the sales order created?

    i have added a time column in VA05. May i know whether it is the time the sales order is created? How do i know if it it the created time? Need to know the sales order created time, for example at 7:00. Thank you

    Hi
    Yes this is the order creation date. You can cross check by seeing the time by checking the entry in table (VBAK-EZERT) by passing the VBAK-VBELN as the order number.
    Thanks
    Indranil

  • 6070 - Increase the time the display stays illumin...

    Is there a way of increasing the time the display stays illuminated for? ATM my screen goes black after a few seconds which is annoying when trying to enter a number - the only way to "re-illuminate" the screen is push another button, which (depending on the button pushed) will take you to a different menu or even start dialling the incomplete number.
    The default time the screen stays illuminated for is not long enough, and there should be a way of increasing the time it stays on for. I've tried changing the Screen Saver settings and the Power Saver settings, but niether affect the time the screens stays illuminated for.
    Other phones that I've used allow you make the screen stay on for as long (or as short) as you like, but not this one - why?

    Hi kevin,
    I try to do this earlier....but it is not working.....
    I want to increase the number of results display in the popup window (i.e. lookup window on web gui) ....
    Currently, it displays only 10 values....to see other values, we have to click "next" link....
    so, I want to increase the no of display values in one page to 20...
    Regards,
    Chaturanga

  • My hpofficeje​t6500Aplus will not keep a wirless connection and halh of the time the computer cannot

    I have a hpoffice6500Aplus710n Three in one.  Since I have had it Ive had printing problems with.  Half of the time the wireless network feature does not work.  Then I mtry to hook it up so that it can print using the Usb cable.  The computer more often then not is unable to communicate with the printer.  Every hp printer I have owned I have had trouble with in one way or another Now Im afraid I m going to scratch this hp printer.  If I do this will be the last Hp printer I will ever own.  My frustration with HP printers has come to this point I think I should return to kodak I have had almost zero problems with them.  So this is a last ditch effort to get some.  Every test everytninf on my computer tells me its working properly and that is not true as I can not get in toes.  So if I cannot get the wireless running and stay running Im scraping HP forever.   Roy A Ames

    Solution may be found if you search in the "More Like This" section over in the right column.

Maybe you are looking for

  • My Illustrator CS5 keeps freezing when I try to render artwork using the 3D revolve effect.

    I am designing my band's album cover and it features pill capsules.  I can create the object with ease, but when I click on "3D Revolve" and then hit "preview" it says "Rendering Artwork" and instantly freezes at halfway.  This is really starting to

  • How to know the filename and extension of a file in PKCS7  envelope

    Hi! I've a programm that makes a PKCS7 file. I'm enveloping just one file at a time. I want to know if there is a way to know the filename and extension of the file INSIDE de PKCS7 envelope. Because I receive a file that has .p7 extension, but the re

  • One way sync possible?

    Hi there, here my question / problem : My phone and my computer at work (PC with Lotus Notes), get synched and it works well. I would like to have the same information also on my home iMac - so far so good with iSync. BUT I do not want any changes on

  • Air 3.6 and the fl package

    I just switched over to air 3.6 in Flash Professional. I'm compiling with air 3.6.0.5990 which I believe is the latest version. When I start a new Actionscript 3 file, and include a TLFTextField, and then compile for Air for IOS the app won't run. Th

  • OIM SPML provisioning task generic connector

    We need to know how could get a custom message response from generic connector. Right now we are using a message like: <addResponse status="Error"> <psoID ID="150"> <targetID ID="IDDESTINO"/> <containerID ID="ContainerID"/> </psoID> </addResponse> We