Showing value as a zero or a null in a bound field

I have a table in a livecycle form that is bound to fields in a SQL database.  There are both zero and null values in the database that I want to show as such in the table, but any zero values appear as blank when previewed in PDF or published.  The cell pattern is currently set to null{}|zero{}|num{z,zzz,zzz,zz9}, but changing the pattern to null{}|zero{0}|num{z,zzz,zzz,zz9} or null{}|zero{'0'}|num{z,zzz,zzz,zz9} results in this err msg:
Thanks for any help!

Hi,
Filling the zero pattern with a string, like zero{'0'} should work.
I looks like the is something that tries to set/replace the pattern at runtime.
Do you use any scripts?

Similar Messages

  • Carrying forward accounts with value as '0' (zero) for consolidation

    Hi,
    I have a query regarding carrying forward accounts with value as '0' (zero) for consolidation. Actually when there is any account having zero value then on calculating contribution the value is carried only to Parent Currency Total dimension. After proportion level the value for that account becomes null. Can anyone suggest if there is a way where i can carry the value 'zero' till value dimension "Contribution Total".
    Thanks in advance

    Hi,
    couldn't you do a rule that copies from PCT to proportion level ( either this level or one above that lets you have rule input)

  • When Requested for a Grand Total the column values changes to zeroes

    Hi,
    I have a report with 2 dimensions and 4 facts. The report is showing the correct data when compared with EBS, but when we are applying grand total in Table View then for fact values are displaying zeroes. However the grand total is correct but for some dimensions the measures are displaying zeroes.
    At this point i have modified the Aggregation rule of 1 measure from Default to SUM and when i clicked results Wonder, i can see grand total and the zeroes were replaced with actual values. When i have compared logical queries before applying the aggregation and after, the measure is surrounded with function REPORT_AGGREGATE and REPORT_SUM respectively.
    Can anyone explain me why is this behavior occurred, i got the solution but i am not in stage to explain to client why it happened.
    Kindly help and i will make sure it is definitely marked.

    Re:  Bottom Line Grand Total
    Use the Subtotal function instead of the Sum function for all totals.
    The Subtotal function ignores other Subtotal functions in the column you are summing.
    Your three "Sum" functions would look something like...
    =SUBTOTAL(9,J3:J7)    '300
    =SUBTOTAL(9,J8:J14)  '900
    =SUBTOTAL(9,J3:J14)  '1200
    '--- Info
    1    AVERAGE
    2    COUNT
    3    COUNTA
    4    MAX
    5    MIN
    6    PRODUCT
    7    STDEV
    8    STDEVP
    9    SUM
    10    VAR
    11    VARP
    Jim Cone
    Portland, Oregon USA
    free and commercial excel programs at...
    https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

  • ADF BC: calling SDO : Value for parameter 'findCriteria' cannot be null

    We have created a service interface from an application module. That service interface contains views that have view criteria. We have included those criteria in our services.
    From my consuming application, i added a data control from webservices by providing the WSDL of the service interface. So far so good...
    When i drop the result of a function that is bound to the view criteria to my page, i have to enter four parameters:
    fincCriteria of the Object type
    areaCode of the String type, this is a parameter we added in the view criteria using a bind variable.
    languageCode of the String type, also a custom parameter of the view criteria
    findControl of the Object type
    In my bindings i can provide the value of areaCode and languaeCode but i don't have a clue what to do with findCriteria and findControl. I left them empty and then i get followign message from the server:
    <SOAPProvider><setParameters> Value for parameter 'findCriteria' cannot be null
    <SOAPProvider><setParameters> Value for parameter 'findControl' cannot be null
    <WebServiceConnectionMessages><debugExecuteFailure> Failed to execute a SAAJ interaction.

    Found some documentation on how to use the service interface from business components and as it appears you can create entity objects based upon the wsdl from the service interface.
    Does it mean that i can only use the service interface that way and that when i have for example a dot net application, it can not use that service interface?

  • Show value in "customer" field of FAGLB03

    Hi Experts,
    we have a requirement to Show value in "customer" field of FAGLB03 for all sales related transactions.
    Your support is appreciated.
    Thanks

    solution has been implemented using badi FAGL_ITEMS_CH_DATA

  • Proper showing value of a column type chart in BI 7.0

    Hi,
    I am in BI 7.0.  I created a Web template with column type chart.  I want to show the column value only when users move the cursor on top of the column.
    The problem is when system showing value also show the category/serious and category description.  Is there any way to show value only?
    Thanks for your help,
    Frank

    Hi Wond,
    Thanks for your quick response. 
    Your solution is for BW 3.5 or BI 7.0?  I remember with BW 3.5, WAD has chart property and option.  But, I don’t think BI 7.0 has chart option.  I am with BI 7.0.  I clicked on property and nothing happens.  I don’t know is my system setup issue or other.  When I modify chart property, I have to use Edit -> Wizard or Refine.
    Any other solution?
    Regards,
    Frank

  • How to show value of COUNT_QUERY in a text Item?

    please tell me how to show value of COUNT_QUERY in a text Item?

    If you look a bit further down the thread Rosario posted, you might find the method DanielLiang posted to be easier to implement for you.
    you can use calculation:
    example :
    Database Data Block: block1 ( Query All Records : Yes )
    not Database Data Block : block2 (Single Record : Yes)
    block2 has a text item (number) ,it calculation property :
    calculation mode : summary
    summary function : count
    summarized block : block1
    summarized item : item1(block1's item)

  • Need to create a report to show values for a particular date range

    I have to create a report, out of which I need two columns : << Customer Value Variance and Churn Score Variance >> to show values only for a custom date range, which will be entered via a dashboard prompt.
    These generic date columns are not present and cannot be added. I have to make use of Pres variables
    What I have currently done is:
    1) Created a prompt with 2 different date columns and passing those values into variables vStartDate and vEndDate. (I don't actually need those 2 column which I have selelcted, but I have taken those so that I can prompt the values in calendar format and pass onto the variables)
    2) Created report with necessary columns, with 2 extra columns (hidden) as vStart Date Column and vEnd Date Column which take the values from the presentation variables defined in the prompt. I have created these columns as then I can reference these in the two required columns if necessary.
    I am already facing error in report after doing this and I am confused how to proceed. Any suggestions?
    Thanks.

    Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
    Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

  • Expense Report Summary page does not show any totals - only zeros

    Hi All,
    On creation of Expense Report in the portal  When entering a billable expense report, when you get to the summary page is does not show any totals - only zeros for other two schema's its working fine like displaying totals
    we are surprised that any custom development is hitting or anything relates with configuration
    Provide valuable inputs to proceed further
    Regards
    Jaipal

    Hello vetsrini.
    Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
    <?for-each:LIST_G_SETUP/AS_OF_DATE?>
    <?end for-each?>
    <?for-each@section:G_CUST_INV?>
    <?for-each:G_1?>
    <?INVNUM?>
    <?INVOICE_TYPE_INV?>
    <?DUE_DATE_INV?>
    <?sum (C_INV_BALANCE)?>
    <?sum (C_INV_B0)?>
    <?sum (C_INV_B1)?>
    <?sum (C_INV_B2)?>
    <?sum (C_INV_B3)?>
    <?sum (C_INV_B4)?>
    <?sum (C_INV_B5)?>
    <?end-for-each-group?>
    <?TOTAL_INV_AMT_DSP?>
    <?TOTAL_INV_B0_DSP?>
    <?TOTAL_INV_B1_DSP?>
    <?TOTAL_INV_B2_DSP?>
    <?TOTAL_INV_B3_DSP?>
    <?TOTAL_INV_B4_DSP?>
    <?TOTAL_INV_B4_DSP?>
    <?end for-each:G_CUST_INV?>
    In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
    Octavio

  • Req: to show values of a poplist dependent on values of another poplist

    Hi,
    I have a requirement to show values of a poplist(poplist2) based on the values selected from another poplist(poplist1).
    Ex : when A is selected from poplist1 , poplist2 should show 1 and 2 as values. When B,C are selected from poplist1, poplist2 should show 1 as value.
    i am using Jdev version JDeveloper10.1.3.1
    Please help in acheiving this requirement.
    Thanks,
    Pavan.

    Do you use ADF?
    if yes, you should have a master-detail relation in the DataControl.
    and then in the first combo put autosubmit=true and in the second combo put partialtrigger to the first

  • Flash 2D Bar CHarts suddenly showing Values

    Hi,
    We have just upgraded to Version 3.1.2 and we have seen a strange change in our Flash Horizontal 2D Column (percent) charts.
    The charts used to work fine but now we see Value Text being displayed over the bars. I cannot find anyway of removing these values from display.
    We have a Series 1 simple query that counts the number of items where signed_flag = 'Y' and the number of items where signed_flag = 'N'. This therefore shows two stacked bars that total 100%. Everything was fine, but now the charts are showing the text 'Singed Off, 25%' and 'Not Signed Off, 75%' over the bars (and over the labels).
    I cannot find a way to hide this text. If I open the Chart Attributes and look at the Display Settings the 'Show Values' check box is empty but grayed out. I cannot change this. I have also tried changing the font settings for every available item and this has no affect either - the text is displayed in the same size/colour etc. whatever I do.
    Can anyone help? Is this a 3.1.2 bug or has something changed at macromedia?
    All assistance is gratefully received.
    Martin

    Hi Martin,
    Thanks for posting the metalink number. For others that run into the same issue here's MetaLink's Solution:
    1. Download and unzip the 3.1 installation medium:
    http://www.oracle.com/technology/products/database/application_express/download.html
    2. Find the /apex31/images/flashchart/Stacked2DColumn.swf file.
    3. In the directory where the 3.1.1 images reside, find the /images/flashchart/Stacked2DColumn.swf file.
    a. Rename the original file (Stacked2DColumn.swf_orig)
    b. Replace the 3.1.1 version of <directory name/images/flashchart/Stacked2DColumn.swf with
    the 3.1 version of Stacked2DColumn.swf into this directory.
    Martin
    [http://apex-smb.blogspot.com/]

  • Formula in Excel Sheet shows #VALUE!.

    Hi,
    I have 11gr2 Forms/Reports with Windows Server 2008 64-bit.
    I have Excel sheet imported from Oracle Reports with destype=enhancedspreadsheet.
    Problem is in my Excel sheet, that when I add formula to multiply two columns, it shows #VALUE! error, which is actually occurs
    when we multiply a text column with number column.
    Although values in columns in number format (like 8600.000,45.000), it assumes these as text column and when
    I re-enter same values in columns manually, formula column shows result without any error.
    Is there any settings in REPORTS to avoid this error ?
    Thanks with Regards.
    Bhatt.

    Tom,
    This may seem like a stupid comment but have you checked to see if the excel formulas were put into the layout in the layout definitions screen and not in the layout while executing the layout?  Also does the layout have dynamic columns? 
    For example, if I have 12 Dynamic columns for the periods of the year based on a variable it would only show up in the layout definition screen as 1 data column but would be 12 columns on executing the layout and thus the Excel Formula need to be in the 13th column rather than the 2nd column
    Hope this helps,
    Mary

  • DB02 is not showing values

    hi
    recently we upgraded from 4.6c to ECC6.0, DB02 is showing values as below
    DB Name       PP8        Started       13.04.2008
    DB Server     p690db                   00:37:55
    DB Release    10.2.0.2.0
          Name         DEFAULT                               Filling degree:
    DB system:        ORA
    Size:                     0.00 GB                       Total size:                   0.00 GB
    Free Size:                0.00 GB                       Total free size:              0.00 GB
    Used:                        0 %                        Total used:                      0 %
          Total number               0
    Maximum size:                0.00 MB  ()
    Maximum # segments:             0     ()
          Total number               0
    Maximum size:                0.00 MB  ()
    Minimum free space:          0.00 MB  ()
                               Tables              Indexes               Others                Total
    please suggest me how to get values

    Hi,
    Refer to note 731831- Transaction DB02 always shows 0 as the number of tables.
    Regards,
    Maheswaran

  • DTW error 10000100 Document total value must be zero or greater than zero

    I am trying to import AR service invoices and I am getting an error.
    I am using the Document and Document line files and I have tried several different ways but still get the same error.
    On the main document file I have
    DocNum,DocType,DocDate,DocDueDate,CardCode,NumAtCard,TaxDate,Doctotal
    123              S (tried the ddocuemnt_Service)  20111130    20111130     1111      TEST        20111130       1.00
    Document lines
    ParentKey,LineNum,ItemDescription,TaxCode,FormatCode,Location,LineTotal
    123                (blank)      decription          EX            418000       1            1.00
    Now I have tried removing the total columns on 1 file, then alternating it...leaving it on both.
    What am I missing here?
    Thanks

    Hi,
    You may check this first: DTW Error when Importing A/R Quotation - document total value must be zero
    Thanks,
    Gordon

  • Excise Assessable value is coming zero in STO GRN

    Dear All,
    while posting GRN Excise Assessable value is coming zero in STO GRN.
    we have followed the route for STO is ME21N -> VL10B(DEL and issue) -> VF01 -> J1IIN -> GRN
    while billing condition value is coming from STO PO.
    Pl suggest
    Regards,
    Vimlesh

    Hello,
    While Material transfer from Factory to factory ,Then
    1) Create Stock transfer Order -ME21N
    2) Create Outbound delivery with reff to STO--VL10B
    3) Create Goods issue with reff to Outbound delivery--VL02N
    4) Create Pro forma Invoice with reffe Delivery type and Deivery---VF01.
    5) Create Outgoing excise Invoice through -J1IIN with reff to Billing document
    Please note down the excise invoice number here ,
    6) Goods receipt with reff to Outbound delivery -MIGO , in excise invoice tab select " Reffer Excise Invoice" here enter the  Stpe no generated excise invoice number. then system will default all the duties here.
    and save the document.
    7) Capture excise invoice for Part2 entries -J1IEX.
    8) Invoice.
    Hope it will give clear idea.
    Regards
    Mahesh Naik.
    8)

Maybe you are looking for