Showing white blank screen, showing white blank screen

hi
my ipod is showing white and blank screen and how to restar it again

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013

User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013
I can login with the these AD users and AD direct import is working just fine. We are not using UPS.
With admin user when I click on the user it shows up proper data. But when I login with the same user it does not show me userdisplay/useredit and shows blank data. Also another strange thing is when I add new item in list with these AD users created by
modified by is blank and its really strange. I checked user information list, tried to rerun user sync with direct AD import option but no success.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
According to your description, my understanding is that the page is blank when the use accessed /_layouts/15/userdisp.aspx and the created by field was blank when the user created a new list item in SharePoint 2013.
I tested the same scenario per your post, however I cannot reproduce your issue.
For troubleshooting this issue, I recommend to verify the things below:
Check the permission of the user in the corresponding site collection to see if he can access /_layouts/15/userdisp.aspx.
Delete the user from AD and SharePoint, then re-add the user to AD and grant proper permission to the user in SharePoint to see if the issue still occurs.
Did this issue occur with all the users? Add a new user in AD and test the same scenario.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
Very frustrating, hope someone else has some ideas!
PS My MacBook was about same age, and "expired" in exactly the same way as yours.

After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help

After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help

Avoid using hand-tools or power equipment .
"My mac book did not come with dvd. Now what should i do?"
Bring it to the Apple store. They can help.

I cannot play a video .mov file in Photoshop Elements 12, it shows as a blank white screen

I cannot play a video file (.mov) in Adobe Photoshop Elements, only can hear sound, and shows as a blank white screen.

Margie
Thanks for the replies.
I did some homework on your camera, and it appears to be recording H.264 video compression, Linear PCM Stereo, with a .mov file extension.
Let us do a check list to make sure we agree on the details...
a. You cannot play back the video in the Elements Organizer 12
b. Can you import this video into Premiere Elements 12 Expert workspace with the program's Add Media/Files and Folder/Project Assets? Does it then show up in Project Assets with an image in the thumbnail? Can you drag the video from Project Assets to the Timeline and have the Edit Mode monitor display that video and play it back there when you hit the monitor play button?
From what I have read of your camera, you could be recording 1920 x 1080 @ 60 progressive frames per second. Can you supply an information on that? What are you or the project setting as the project preset (See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio.)
Could you explain what you mean by
and can play it in the video editor, but it just shows the frames, not a real video play.
I am searching the Internet to see if I can find a sample file that I can download.
More later.
ATR

Bridge Slide Show Blank White screen (NEW)

I get a blank white screen when I hit Apple L.(same when I go to VIEW click slide show) I have reinstalled CS3 3 times. Upgraded driver for Video card. Very thing else works OK. this is driving me crazy. I am using a G 5 Pro,operating system 10.5, 5 gig ram, Radon 9600 video card. Checked all setting nothing helps.Not getting ans. to this question I went in an deleted preferences. Now nothing works. Photoshop seem to work normally.

I get a blank gray screen when trying to view a slide show in bridge. Have G5 10.5.1 with dual 1.8 GHz and 2 BG ram. Everything but slide show works in bridge. I have re-installed Leopard and CS3.
Adobe advised trying bridge/slide show in safe boot. Works in safe boot. Adobe says to check activity monitor in safe boot and regular boot to see what's on causing problem in regular boot. Activity monitor the same in both boots.
I think problem is Adobe but I think they are finished helping.
Steve

My creative cloud shows up as a blank white screen. This a few days already. What's the matter?

My creative cloud shows up as a blank white screen. This a few days already. What's the matter?

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
or
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help

My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help! xx

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I dropped my iphone 3gs and the screen has gone blank now showing a white screen with no icons can anyone advise me how to fix it?

I dropped my iphone 3gs and the screen has gone blank now showing a white screen with no icons can anyone advise me how to fix it?

Tim is correct.
But, first step with 3GS white screen and most iPhone problems is Reset, hold both home and power buttons until iPhone begins to restart itself, usually about 10 seconds of holding both buttons. If still white screen.
Next step would be Restore the iPhone Firmware with iTunes on your computer. If still white screen.
Next step would be to follow Tim's advice, if you had not already.

My ipod touch is showing a white blank screen, have tried resetting it but doesnt work????any suggestions?

my ipod touch is showing a white blank screen...have tried resetting it but nothing! any suggestions??

Let the battery drain completely. Then let it charge for about an hour before trying another reset. Helped with mine.

Store status bar shows that it is connecting, but only blank white screen

My iTunes library is fine, but when I was trying to add new music from Store, will NOT connect. The status bar on top shows it is connecting, and I even got just a "flash" of the store on my screen, but then just goes to blank white screen, no error message at all.
Very frustrating!

I have the same problem and have been fighting with it for several days. I think the last thing that I did before this happened was to let Quicktime update itself. When I open itunes and click on store, the connecting bar gets halfway and then stops. That leaves me with the white store page, if I leave it alone for a bit, I see words as in names of singers and but no pictures.
I have ran the diagnostics and see no problems at all, no event logs in windows, no errors at all. I've un-installed itunes and re-installed but no change. I'm using Norton 360 from comcast. I have windows 7 pro 64 bit. Also, the help in itunes doesn't display.
I put in a ticket with apple and the response I got back basically told me to do what I've already done. I created a new user and have the same issue.
Any help at all will be very much appreciated. I think this started August. 8, 2011.
thanks so much for reading

Why is that whenever there's a power outage or whenever I restart my computer sometimes my iMac wont completely load up? It will just show a blank white screen. It will do that for a few days until it decides to fully load up.

Why is that whenever there's a power outage or whenever I restart my computer sometimes my iMac wont completely load up? It will just show a blank white screen. It will do that for a few days until it decides to fully load up.

First step would be a PRAM reset.
http://support.apple.com/kb/ht1379
Post back if that does not work.
The next step would be to try "Repair Disk".

Kde-unstable beta 2 shows blank white screen

installed kde 4.3 beta 2 with pacman -R kde (4.2.4) and pacman -S kde-meta
after logging in the splash screen appears and later disappears leaving white blank screen
there used to be red X button (with title could not load this plasmoid when hovering over it) in the place where i had folder view in 4.2.4. it disppeared after i deleted ~/.kde4
the screen shows no reaction o any keys or clicks except alt F2 and alt ctrl del
in alt F2 commands can be typed but cannot be launched (as if they dont exist). task manager can be opened from there and it shows the normal kde apps (plasma etc) up and running
alt ctrl del logout menu works normal
UPDATE
i installed and installed kde and kde-meta few times more. nowi have kde 4.2.4 that won't open konqueror and few other apps and it has visual artifacts of kde 4.3
Last edited by ash (2009-07-14 11:58:29)

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When I Preview or Publish my Project it shows a blank white screen

I created a projected, successfully published it as a SWF and everything worked fine. Now when I go back to edit and try to preview the project or individual slides it just shows me a blank white slide, even the captivate skin with toggles that I chose are missing. The toggles for the preview at the top left corner remain. When I preview as HTML5 in a web browser the project works fine. I tried copying the first slide to a new project and previewing to see if somehow another slide may be corrupting the project and that first slide still malfunctions on the new project. This is absolutely nervewracking, I really don't want to have to do all 23 slides all over again!

Hi,
Is it possible for you to share a sample project with us so that we can investigate the issue at our end. Please send it to [email protected]
Thanks,
Nimmy Sukumaran.

Firefox is freezing, then only showing a white blank screen when I try to load it.

Ok, I have not had any problems with firefox, I was logging on it all the time, everyday, etc... with no problems until today. Today when I went to log onto the net, firefox opened, and it looked like everything I had customized from tabs, bookmarks and etc... had been wipped off. But also, it would not load any page, none of my bookmarks were showing in the side bookmark window that was open. It would only say "connecting..." in the only tab that was there. I could not click on anything, or do anything. When I tried to click on anything within it, I would get the "not responding" error at the top, and then the whole browser would disappear, and be replaced with a white blank page, with only the firefox logo, in the blue bar at the very top. This would also be frozen, and I could not even get it to close. I would have to open my task manager, and close it that way by stopping the process.
I have not installed anything new on my comp, I have not downloaded unknown things, or anything new I do not think recently either. Like I said I have been using firefox for years, never had this problem. I used it just fine even this morning before I went to bed. Then tonight when I woke, logged on, this was happening.
I have tried using IE, and IE is working just fine, without any problems. I used IE to download, and then update firefox to the newest version, still no change. By the way I was not running "really old" version or anything, I keep my firefox updated. Soooo can someone help me?

I have a similar issue -- using an embedded google form rendered as an iframe. It is present in the source, but displays as blank space.
This problem seems to be confined to Mac OS X (I'm on 10.6.3), and I didn't have this problem with FF 3.6.x (not sure if I ever had 3.6.9, or what version I had prior to 3.6.10). The issue is not present in Chrome or Safari, or on 3.6.10 on Windows 7.0 I believe

Showing white blank screen, showing white blank screen

Similar Messages

Maybe you are looking for