Shows being connected, but will not run
I have (2) I-pads in the house and after coming home from a long weekend both show that they are connected in the settings wi-fi but both will not run any wi-fi programs. I have Mac computer that works fine and my I-phoneG-3 works fine, all which worked ok before we left for the long weekend. I have turned off the I-Pads to reboot and still does not connected. Need Help!
Try:
- Powering off an then back on your router
- On the iPad reset network settings:Settings>General>Reset>Reset Network Settings.
Similar Messages
-
Airport shows being connected but will not connect to internet
Airport will not connect to internet yet shows me as connected.
When and if I do get connected, I will loose the connection and unable to access the internet.
This has happened using several different wireless locations.
Please help as to what my settings should be or how to correct the problemWhat debugging steps have you taken?
Connecting to your wireless network and connecting to the Internet are two different parts of the connection process.
If you open your Network preferences panel does it show you have an IP address of the form 169.x.x.x? -
I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
Certain wifi's will not work on my iPad, it shows it's connected but will not connect.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My ipod touch 4th gen shows 3 bars of connectivity but will not load on internet-required apps
my ipod touch 4th gen shows 3 bars of connectivity but will not load on internet-required apps
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.
Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
Please try each of the following, in order, until hopefully resolved:
Note the following are excerpts from an OS X Daily article.
* Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
* Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
* Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
* Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
* Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
* Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
* Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
* Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
* Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
* Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual. -
The slide show runs in "live mode" but will not run from the browser.
Here is the link to the web page http://www.williamshomesteadranch.com/welldone.html
This is the first time that I've tried to use a widget and it looks good, but will not run fromthe browser.The answer to the problem is very simple, the main images cannot be found. Please have a look at the following markup starting with line 305 or thereabouts:
<ul id="ImageSlideShow" title="Jesse the Border Collie">
<li><a href=Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg src="Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg" title="Jesse"><img src="Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg" alt="photos-1.jpg" /></a></li>
<li><a href=Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg src="Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg" title="Jesse and his Friend"><img src="Spry-UI-1.7/jackandjesse/jackandjesseonbeachthumbnail.jpg" alt="photos-2.jpg" /></a></li>
<li><a href=Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg src="Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg" title="Jesse playing soccer with his friend"><img src="Spry-UI-1.7/jackandjesse/jackjessesoccerthumbnail.jpg" alt="photos-3.jpg" /></a></li>
<li><a href=Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg src="Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg" title="Jesse and his Friend resting"><img src="Spry-UI-1.7/jackandjesse/jackjesserestbeachthumbnail.jpg" alt="photos-4.jpg" /></a></li>
<li><a href=Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg src="Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg" title="A Walk down the Beach"><img src="Spry-UI-1.7/jackandjesse/jackjessedwnbeachthumbnail.jpg" alt="photos-5.jpg" /></a></li>
</ul>
Now take a closer look at the first image.
The thumbnail is jacksjessethumbnail.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg. Bless me, the thumnail is there. No problem here.
The main image is jacksjesse251x270.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg. Lo and behold, the image cannot be found. The problem must be here.
We can do the same analysis for each of the remaining images with the same result. This means that the main images have not been uploaded to the correct folder or that the path to the main image is incorrect.
Assuming that the path to the main image is correct, using DW, have a look in your local folder as follows
Then 1. single left click on the jackandjesse folder to highlight it, 2. click on the symchronise button, 3. make sure you have the correct selections in the Synchronize Files dialog and click on preview.
Then click on OK as per
and the files should be uploaded to the correct remote folder.
Gramps -
Apps show but will not run after sync
iPod Touch 4th generation updated to version 4.3.2(bh7)
last night, sync went well. Today all apps appear but will not run they just flash like they are trying to run. System goes back to main screen.Hi,
Welcome to Apple Discussions!
Try a hard reset of your iPod: Press/hold the home and sleep/wake buttons until the Apple logo appears.
Hope this helps! -
Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.
Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.
I'm testing 32bit software that will run in 7-64 Pro but will not in win 7 home premium or vista.
The 7-64 Pro machine is NOT running the program in XP mode although is is being run as admin. The 7 home premium and vista beta testers have tried every work around/mode, admin mode, and anti-virus exception. I've run process explorer & WinMerge to evaluate
the differences between os operations & dlls loaded but am unable to find the OS issue.
Currently 2-win7-64 machines, 1 vista machine and 1 win 7 machine had no issues with the program as it started up and ran immediately.
After 3 beta's 30 hours of testing & 50 of my own, I believe I've narrowed the issue down to the win 7 home premium and vista os's.
Can anyone here suggest other ways to further narrow it down so as to provide functionality on all 3 os's?You must provide the exact name and version of the software for anyone to attempt to answer your question. Primarily the functionality of any software is entirely dependent on what platforms the publisher intended the software to run on.
If you are the programmer you need to go to the Microsoft Developer Network forums for assistance:
http://msdn.microsoft.com/en-US/#fbid=Xt631zR1D90.
This is an End Users' Peer-to-Peer forum that does not address programming from any perspective.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks
Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
CC installs in Win 8.1 but will not run?
Have reinstalled repeatedly over past 3 days - sometimes completes install but will not run, sometimes does not complete install and quits, sometimes gives Error 50. Have run CC uninstaller multiple times and it always leaves behind CoreSync_x64.dll which will not delete manually. Hat to try next?
"Failed to install" | Creative Cloud Desktop : https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
-
I have recently purchased the finale 2011 music program, and it installs without any problems, but will not run when I try to start up the program. It acts like it is going to start, but stops when loading the plugins. I have been talking with Finale tech support for three days, and they are coming up empty, but they are still trying. Any ideas what the problem might be?
Thanks,
JohnTry booting in Safe Mode (hold the shift key while booting until the grey progress bar appears).
If you're able to log-in, then re-boot and log-in -
Camcorder connected but will not import or show video
I have a Sony Digital 8 camcorder that used to work well with imovie. Although I have it connected and the blue screen states that the camcorder is connected, imovie will not import the video nor will it show it playing. When I rewind or fast-forward, it will show the counter but I will not get a picture. The play, fast forward and rewind buttons in imovie will operate the camcorder but no image or sound. The import button shows that it is being pressed but still no results. Aill I get is the blue screen with its message of camera connnected.
I have used different tapes, verified that the tapes have content, rechecked the connections and reset the permissions. Could use any and all advice.
Thanks
Rich
Mini Mac Mac OS X (10.4.1)Hi Richard
In rare cases this can have happened.
A. Try Your Camera on another Mac. OK - Then skip the rest !
B. Control the 6-pin end of Your FW-cable and the connector on Your Mac so
that it is not broken.
As You see it is Non-symetrical BUT it can be forced in upside down and if
You use back side connecter it is even easier while it's hard to see what's
going on.
If this has happened = You have a broken Camera.
It will be controlable by iMovie
will record and play normally via lens/analog connector
but - NO import or export via FW-connector
Analog/digital chip blown. Expencive repair.
Yours Bengt W -
Bluetooth connects but will not pair to device
Iphone 5 running on 7.1.2. bluetooth connects to CAR KIT but will not pair (does not ask for code after connecting). audio only plays from phone and not through the speakers connected by bluetooth. I have done the apple trouble solution steps and the problem still persists. any help would be appreciated. the device is compatible with iPhone.
Hey there jrf07d,
It sounds like your phone is not pairing to your vehicles bluetooth connection. I would recommend these steps to get it paired, from the following article:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
On your iOS device, tap Settings > Bluetooth and find your device in the list. If your device says Not Connected, tap the name of your accessory to attempt to connect it.
Tap Settings > Bluetooth and turn Bluetooth off and then on again.
Restart your iOS device.
Tap Settings > Bluetooth and locate the Bluetooth accessory you are currently connected to or attempting to connect to. Then tap and "Forget this Device". Try to pair your Bluetooth accessory again.
You may need to your Bluetooth accessory PIN again if your accessory requires one. Some common PINs are 0000, 1111, and 1234.
Restart your Bluetooth accessory by turning it off and then on again1.
Update your device to the latest version of software. See how to update your iPhone, iPad, or iPod touch.
If your Bluetooth accessory has upgradable firmware, check to see that you have the latest version1, 2.
Can't pair to a Bluetooth accessory
If you see the word "Connected" next to a Bluetooth accessory in Settings > Bluetooth, your iOS device is already paired to a Bluetooth accessory. Remember, you can only connect to one Bluetooth accessory at a time.
If your Bluetooth accessory requires a PIN for pairing, be sure that you are entering the correct PIN1.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
Thank you for using Apple Support Communities.
All the best,
Sterling -
Installed firefox 4 but will not run on osx10.4.how do i retrieve version 3.6 and all bookmarks etc
i downloaded firefox 4 but did not notice that it required osx10.5 as my computer is running 10.4.11 installed program ok but when trying to open it i get message that it will not run on my system.
how do i get back to 3.6 as firefox 4 appears to have deleted all the old files. can i retrieve my bookmarks etc and where can i download version 3.6You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com
Maybe you are looking for
-
I can't uninstall or update iTunes. I get an error message that it can't find the file itunes64.msi. where is it suppose to be?
-
How to refer to another EJB from different root
Hi , Is there any way in JDeveloper to refer to EJB's from another context root ( Technically different application ) from the EJB's in the current context root. ? Am seeing a couple of ways, but looking for something better if possible 1) Reuse the
-
PDF icon images appear on desktop, but not in folders?
I just updated to Windows 7. Before the update I could only view pdf icons on the desktop and inside folders would be a screenshot pdf icon image of the file. This was very helpful when using a lot of pdf files. NOW, after installing Windows 7, I hav
-
WE20, WE21 settings after SAP BW system copy
Hi! I copied SAP BW system and have executed the following post installation settings: - BDLS (conversion of logical system names) - Program RS_BW_POST_MIGRATION When I go to tcode RSA1 on my new copied SAP BW system and try to reach source system I
-
after I enter password, it say user profile service failed to log on it also says user profile cannot be loaded. Is there anything I can do to fix it or do I have to take it and for a specialist look at.