Shows no video but has sound

Show no video but has sound what do I need to do to fix this?

Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

Similar Messages

.mov files no video but has sound in premiere pro cs6

I know this isn't adobe. However, all of my .mov files play with no video in quicktime, premiere pro cs6, and sony vegas 9. I've looked into the missing codec, and quicktime brings me to the general page with multiple codecs listed. This happens with two different types of cameras. Both HD. I have Windows 7. Does anyone know why the files won't play video? Thanks.

jon - no idea why you were such a snarky SOB in your reply. person was just asking for some help. obviously stuck and could use some advise. you could have chosen to ask a few clarifying questions to see if additional info could be gleaned. instead you CHOSE to be mean. NOT COOL. if you hate being a support person, dont offer your help and dont go online. otherwise, change your attitude.
If you feel my comments were inappropriate, then feel free to report my post as such. If you feel the information was incorrect, then please provide what you feel to be more correct information. The object of my comments was to 1) point out that no accurate solution was possible without amplifying information, 2) inform the individual why more information was needed, and 3) describe at least three methods for getting the required information. It was not my intent to be either "mean" or "cool" but rather to teach the individual how to analyize their video content in order to become more self-sufficient in the future. Perhaps if you concentrated more on the content of my response than on your emotional interpretations of what you think was implied, you might find something of value.
My question for you is,"Did you actually create a new profile tonight to hide your normal identity while you berate my response?"
for lordrebeccasama - there are people out there that would like to help. I would suggest you try to get answers to some of these questions and post - people may have some ideas: Does this problem occur with all MOV files or just certain ones. if just certain ones, can you ell which camera or source produced the file? can you see if the files can be played on other machines (like another PC or a MAC)? if you can, try to get into the properties of the MOV file (the container) and see if you can tell how it was encoded. good luck - and on behalf of all people that actually like to help, i apologize on behalf of jon.
Since you have essentially asked for the same information I did, albeit in a more indirect manner, I don't feel any apology is needed on my behalf.

Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

There's Video but no sound!

So i have some Tv show on my MacBook, and when i go to watch them there is video but no sound. Quicktime prompts me that i need to download a codec but not which one. Which onw do i need?

Tried that, it said i needed DivX, but i already have that. What else could i use?Try watching it in VLC. If it plays, check the audio info and see if it is more specific. What is the file extension -- .divx or .avi? What DivX component do you have installed? Do you have Mac "non-native" audio support (like AC3) installed? Until you can supply more information, I can only guess at possibilities for you to check and evaluate. You might also try opening the file in a conversion application like FFmpegX and see if he A/V formats are recognized/convertable to a fully supported QT compression format. As a last resort, consider a "rule of thumb here" -- if a format doesn't work, don't support its use.

Got the video, but no sound...

I had videos I wanted to put on my ipod, but, the file couldn't be read, so I had to convert the songs so my ipod could read it, but it seems that when I play the video... the images come... but not the sound... I have no idea what to do, some help would be appreciated.
ps: it plays normal songs no prob, thx alot.

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, iTunes & the iPod (both of which use QuickTime) only show the video and no sound.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

I downloaded some videos to Premier Elements 13 from external hard drive but now the external hard drive is damaged. I tried to open the videos on the organizer which it shows the video but with a yellow ? and says missing file. Is there anyway I can open

I downloaded some videos to Premier Elements 13 from an external hard drive but now the external hard drive is damaged. While setting up my new MAC the external hard drive was dropped and I have been told by an outside source they could not retrieve the files. It had 4 years of photos and videos on it. I remembered that I had downloaded some of the videos from the external hard drive (before it was broke) to Adobe Organizer 13 when I installed the Adobe 13 on my MACOS X 10.9.5. I tried to open the videos on the organizer which it shows the video but with a yellow ? and says missing file. Is there anyway I can open these videos?
Any input is greatly appreciated!! I am sick over losing the videos and had a little hope on Adobe Organizer until I was unable to open them. I am thinking it is due to my external hard drive not being plugged in. I thought when I transferred from the external hard drive to Adobe 13 that it would be there without the external hard drive needing to be attached but maybe I did something wrong.
Thanks again for any help!!!!

jnrmendonca
It had 4 years of photos and videos on it.
To what did your camera record those photos and videos - camera's internal memory, inserted memory card, other?
Any remote chance that the latter may still exist for you to use to download the camera files to your new external hard drive?
ATR

I have m4v files that have subtitles and sound options they play fine on my computer in itunes and but when i watch them on my apple tv there is video but no sound ... why ?

I have m4v files that have subtitles and sound options they play fine on my computer in itunes and but when i watch them on my apple tv there is video but no sound ... why ? all my other videos are fine and they in mp4 format.

Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery.

My iphone4 ipod shows no video, but i have videos recorded by my iphone. please help me

my iphone4 ipod shows no video, but i have videos recorded by my iphone. please help me

Just to to clear.
The Photos app on your iPhone is the only place you will see your recorded movies and/or movies synced from iPhoto on your computer.
As Rudegar suggests, the Photo app is divided between your camera roll where unsynced movies/photos are kept and Photo Library shows movies/photos that have been synced from iPhoto on your computer to your iPhone.
Like music, your movies will only be available in the iPod app if you purposely imported your recordings into iTunes itself, i.e. they exist in the movies section of iTunes on your computer.
Hope this helps, Rodí

Live!Cam Voice: video but no sound

I've installed the Live!Cam Voice, updated the driver too but I cannot get it to work. I does record the video, but there's no sound.
I've checked the sound settings both on the Live!Cam and windows. The Live!Cam settings are set to record using Live!Cam, whereas the windows sound settings, in control panel are set as follows:
Audio
Realtek AC97
Sound recording
Live!Cam Voice (mic)
The strange thing is that the Live!Cam microphone DOES work if I use it with Windows Accessory Sound Recorder.
Has anybody got an idea why there's no sound?
Thank You
Message Edited by lillyvalleys on 09-19-2007 12:48 PM

I am having the same problem. I am using windows Vista and have tried?recording sound in other applications and it works fine, just not when trying to record in LIVE! cam. I jbought this cam 2 months ago and just now find out it does not work when I need it the most. I am due to give a video presentation in two weeks and will probably have to buy a new cam, what a dissapointment!

A/V Outputs Video but no Sound to my TV. (1st Gen, 2.1 Firmware)

Hello all,
I have an iPod Touch issue that I'm oh so sure you'll all flock to help me with. =)
I purchased a Rocketfish brand Component A/V cable for the iPod. The cables it has are:
3 Component (Y, Pb, Pr)
2 Audio (red, white)
1 USB
1 iPod wide data connector
I plug the component and audio in properly to my home theatre system (no mistakes on that end) and go into a bunch of applications, but only get video and no audio.
Pictures will show the slideshow. Videos will show the video. Youtube will show the video. Nothing, including Music will play any audio out whatsoever.
I've read about there being numerous a/v out issues, including non-Apple brand cables being weird. However, I haven't read anything about the video and not the audio working. I guess I could always just get a 3.5mm to composite, but I'd rather use just one cable.
I have also tried everything above with a 2nd Gen iPod Touch with 2.1 Firmware. The exact same issue is present.
Can anyone shed any light on this? Even if it's just your experience with this kind of cable or anything you know about it, I'd appreciate it.
Thanks!

No answer but marking as answered because I want to clear my unresolved questions.

Formating videos for ipod- video but no sound!!!!!

ok i relize that a million questions have been asked about formating videos but i will make it million and one.
i have some vides that i made with windows movie maker and i also have some from DVD's. i read in another question to download video ipod converter, and i did i am just lil confuzed, i know my way around these programs so can some just tell me in lamins term like you are talking to an forgner tell me what steps i need to convert it and be able to have sound with movie. i have the 30g ipod english, itunes, ipod converter, i just need the help
Cheers

OK as for your question, that is good. Itunes has the video and sound!
Here is how we fix this, (I hope, right? lol) do you have your Ipod set to Auto sync? You know it is on, when you cannot edit anything on your ipod, it just copies everything on Itunes!
Here is what you do if Auto-sync is on:
To turn auto sync off:
Attach Ipod.
Open Itunes
Click on you ipod icon (the little ipod picture under devices)
The third button down will say: “Manage all music and videos”
Click on the box and give it a, √
Now you HAVE to drag and drop things (music, video, etc.) in Itunes to your ipod. Itunes will not do it automatically anymore. But if your computer crashes, your Ipod will not delete all of its music if you attach it again (because there is no music on Itunes).
If you do not have sync on, write back and let me know. Auto sync is the main problem that cerate this.
As for your question about dragging files to Itunes, make sure they are MPEG-4 format (Quick-Time) or they will not drop into Itunes.
Let me know if it works. God Life

Itunes Shows Music Playing But No Sound

When i go to play a song it Shows iTunes playing it but no sound is played. I can still play music on the internet watch videos etc and hear sound... Just in iTunes i cant

I'm having the same problem; in addition to that, iTunes won't allow me to import a cd, someone PLEASE help!

Real Downloader will download video but no sound.

Real Downloader was working fine but now only downloads the video but not the sound.

The Real Downloader has been incompatible with Firefox for the last couple of versions. There are many similar addons on the Mozilla addon site.
* addons.mozilla.org

Shows no video but has sound

Similar Messages

Maybe you are looking for