Shrill stuttered white noise freeze/crash??

I only get this when Logic is running. There doesn't even have to be much of anything going on. Maybe one synth or Kontakt open. Point and click on something and whammo....scares me every time. It sounds like crackling sizzling white noise screeching out of the speakers at full blast.
Anyone have advice?
iMac 2.5 GHz Intel Core i5 - 16 GB RAM - OS X 10.9.5 Mavericks - Logic Pro X 10.0.7
NI Komplete 10 - AKAI MPK249 - EMU XBoard 25

Look at this post, not the same problem but could possibly be related.
Files are in 8 bit and can't be played back?
Also, look at these search results.
https://discussions.apple.com/search.jspa#q=White+Noise&place=/places/5955416
Read down the list.

Similar Messages

Since installing 3.6.12, firefox crashes continuously...I have gone back to Windows Explorer because firefox does not run anymore. Upon any actioin in firefox, the screen goes white and freezes and I get an error message saying firefox has stopped working

just about any action in firefox will cause a "WHITE SCREEN" freeze up and then an error message stating that firefox has stopped working. This happens in EVERY sessioin of firefox.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Pavilion Elite e9180f freezes, crashes, BSOD

I am one of the many unhappy customers who bought this piece of junk (Pavilion Elite e9180f) and waited too long to return it because in my naivete, I thought it was some kind of simple software issue. Nope! It's definitely something wrong with the hardware, because the freezes and crashes have been happening since day 1, right when I took the thing out of the box.
Yeah, the system is fast and runs Windows Vista great, when it's actually WORKING, which is usually only guaranteed for about the first 5 minutes after you power the system on and boot windows. After that, it's just buying time before it crashes again. Forget trying to get anything done on this computer. Forget about asking this PC to play a video or music file without the files "stuttering" during playback. Even my 7 year old Sony Vaio which is running XP can handle playing an MP3 file without stuttering and crashing!
Like everyone else, the freezes and crashes happen either one of two ways:
1) The machine begins to "stutter", stutter more, then freeze/crash. When I say stutter, I mean I move the mouse, the pointer graphic will hesitate on the screen and lag behind. If you start to play a video or music file, this manifests in an audible "stutter". The stuttering gets worse and worse as minutes pass until eventually it freezes for good, blasting that 1/50th second moment of audio into infinity. You have to reboot immediately if you don't want to go deaf or be driven mad.
2) I will be doing nothing at the time (example, I close all programs out and leave Windows sitting on the main desktop screen), I'll walk out of the room for a minute, then come back and find I can't move the mouse. This system will often lock-up without any warning!
Sometimes I'll get a BSOD or error screen, sometimes I won't (in which case your only option is to do a cold re-boot.) When I do get the BSOD, the error is ALWAYS the "did not get a response from the secondary processor" yada yada. I wish HP would just admit they shipped this model out with a bad processor/motherboard/whatever and do an official recall. I have owned PCs for the last 13 years and this is the worst and most consistently disappointing experience I have ever had.
What is the hardware issue? Which part is the lemon part? The motherboard? The processor? The BSODs seem to indicate a bad processor. I do have the Pegatron Truckee version 1.03 motherboard. Is that the problem?
P.S. I have contacted HP on many occasions about this, literally stayed on the phone for hours with "customer support" (according to one HP rep, 80% of their customer service reps are based outside of the United States...good luck getting any "technical" help from them) to no avail. I did talk to one nice tech support guy in Canada who said "it sounds like your unit has a bad processor", so he had HP send me a box to ship my unit to their repair center so they can replace the processor. However, I have also had HP reps tell me it could be anything from the memory to the hard drive. Multiple HP reps claimed to me that they have "received no complaints" about this system. One guy told me he "thought he got an email last week" regarding "something" about the system, but couldn't remember what it was and he put me on hold while he searched for the email. He never found it. What a joke.
EDIT: Just to clarify, the crashing issue has been happening since day one, but initially I thought it was an issue with Vista. I had never owned or used Vista before, so I thought maybe Vista was just unstable. Nope. I know several people who own Vista and have never experienced these issues. I have downloaded every update from Microsoft/Windows Update. I have upgraded to Vista SP2 with all the latest drivers and software for all of my hardware. No luck. It is definitely a hardware issue. Thank god HP's warranty is good for 1 year (I bought my Elite in July).
Message Edited by Doonyman on 09-24-2009 02:58 AM

Unfortunately I have to add my disastrous encounter with HP's E9180F a true lemon HP is selling. I must take some responsibility for not carefully researching this model before I purchased, but I trusted the HP name and got stung- big time.
The scoundrel :
HP and its Pavilion Elite e9180f
Windows 7 64bit
motherboard - Pegatron Truckee ver 1.03
BIOS ver 5.22Intel Core i7 920 @ 2.67GHz
Memory 9206 MB Ram
As so many others have reported my HP E9180f started locking up and going to BSOD right out of the box. My first freeze-up came when I was doing the Windows update process. At first I didn't think much about it but I started getting random freezes a couple time a day. At that point I went online to see if others had experienced the same problem and perhaps had a fix. What I found was very troubling; I found extensive documentation describing my exact problems and what was really horrifying was the reports of how ridiculous HP's help services were treating people with the problem. At first I didn't totally believe what I was reading on HP's own customer forum; I do now.
·         I've went through the total recovery process three times now, HP techs have spent hours remotely running my computer, (yes it did lock up on them to)
·         I had to upgraded the BIOS. (HP tech tried, said he had, but he hadn't)
·         I was directed to clear the BIOS (luckily for me I had the tools
·         Updated all drivers again and again.
·         Next I was asked to remove the video card, memory, and motherboard power cable and reseat them. I declined because I didn't want to give HP any reason to void my HP 2 year House Call Care Pack which covers this unit. When I invited HP to send a service tech out to perform these tasks, they said that house call only covers part replacement, we weren't replacing a part. I couldn't believe what I was told. Are you feeling my frustration?
Keep in mind that each time HP requests that I make changes, they then ask me to test the system, which I did and each time with the same result, BSOD
I'm heading into my fifth week of working with HP to fix this problem. and I still haven't even been able to get my case moved up to a senior case manager, what a joke HP's help process is.
One conversation I loved was;
HP tech: "I'll have a senior case manager call you within 24 hours."
Skeptical me: "What should I do if I don't get a call?"
Silence, no response.
Me again: "What should I do if I don't get a call?"
HP tech: "That's an impossibility."
Guess what? The impossibility became reality (I bet you guessed) .
HP's last stall tactic was to have me fax them my proof of purchase and invoice and call back in 24 hours. Where have I heard that before? Apparently nothing can go forward until they receive it. So I faxed them the stuff within 10 minutes, and when I called back 24 hours later, guess what, you're right it wasn't on their system yet. I asked couldn't I be escalated to a senior case manager (it's apparent that only a senior case manager can do anything). "No," was the tech's reply, "call back again later".
Please if anyone out there knows the secrete to getting a senior case manager, or an HP tech support number here in the U.S. so I can get this thing fixed I'd love to know it.
Fast becoming HP never again.

MBP 17" report, occasional white noise from right speaker

My 2.16Ghz MBP with 100GB 7200rpm drive and 1GB memory arrived a few days ago. Since then I have been installing software, running apps, and generally putting it through it's paces. I have also added a 1GB stick from Crucial. On the whole the MBP has been great, except for a few (hopefully minor) problems:
1. It gets quite warm on the left palmrest, and gets uncomfortably hot between the keyboard and the screen. This is just during casual use, web surfing, downloading updates etc. The case temperature is about the same as my old 667MHz TiBook after it had been at 100% CPU for several hours (encoding video). I dread to think how hot the MBP will get doing something demanding.
2. When closed the screen appears to be slightly bent, the gap at the two front corners is about 1mm wider than the gap at the latches.
3. I have started to get hard crashes during the boot up sequence. Specifically after the grey apple I get the greyed-out multi-language reboot message and have to reboot. If I continue trying to reboot it eventually manages to get past the grey apple and boot up normally (usually this takes 2 or 3 attempts). I suspect this is due to something I've installed, possibly some Canon software for my MP750 printer.
4. I have now heard a white noise/static sound coming from the right speaker on 5 occasions. Three of those occasions were while booting (one of them was when I first turned the MBP on! Not a good sign). The computer boots normally, but with this strange noise! The other two times where when I was launching apps. On each occasion the noise lasted about 3-5 seconds before stopping. It's more of a hissing noise, not a mooing or a whining noise. It sounds exactly like the speakers on a vinyl record player when the needle is in between songs.
Obviously all of the issue are annoying. However I'm only REALLY concerned about item 4. Item 1 was kind of expected after doing some pre-purchase research. Item 2 is annoying in a £1800 laptop, but I can reluctantly live with it. Item 3 is frustrating but I'm sure I can 'cure' it by removing software (it only started happening after a day or two of fairly heavy use). Item 4, on the other hand, is intolerable
Anyone have any suggestions? Advice appreciated. The nearest Apple store is about an hour away, so advice other than "take it to a Mac 'genius'" would be appreciated.
17" MacBook Pro 2.16GHz Mac OS X (10.4.6) 2GB RAM

Well, that was 15 minutes of life wasted typing out the above post that I'll never get back
I was hoping for some sort of 'expert' advice from all the users here with thousands of posts. Evidently not.
Anyway ... I have (kind of) fixed the problem myself. Resetting the power management unit almost completely solves the static noise problem. I say almost, because since resetting the PMU (about 2 weeks ago now) I have heard the static noise ONCE. This is compared to hearing it around 3 or 4 times a day prior to the PMU reset.
This at least makes me slightly more confident that this is a software/firmware glitch, rather than a hardware fault.
Hope this helps someone.

My nokia 5800 keeps freezing/crashing when i try t...

my nokia 5800 keeps freezing/crashing when i try to view my pictures and videos? what do i do

Try clearing privacy data in browser to get a bit of ram back. if no good , do hard reset, you'll need to re-set up phone so back up first. Then type *#7370# and use passkey 12345 and phone will re-start and be like'out of the box' your memory card will not be affected.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Adobe Indesign CC2014 and mac freeze crash at dialog box "nouveautés"

Hi !
Adobe Indesign CC2014 and the mac freeze crash when the dialog box "nouveautés" appears !
The Indesign CC work fine and doesn't crash, but the CC2014 freeze on this dialog box !
Is there a possibility to do this dialog box don't appears ? In preference file to edit on the disc for exemple ? or a file to delete ?
Thanks

Thanks pooja2087 but that doesn't work !
But I have news :
I have started without extensions (with "Maj") and then the windows "Nouveautés" appears but totally white, but that is working, i can close the windows and work with indesign. But the windows appears on next launch because I cannot clic on the "don't show next time" case (the windows is white).
Then this windows is the problem (probably directX function that crash my old computer (this one is old)).
Then how can I desactivate this window on startup ?

Imac freezes/crashes with any software

Purchased this imac (intel) december 2009. a few months later the freezing/crashing screen started. I've since downloaded all software upgrades for OS, itunes, word, excel, icloud, leopard, lion etc. I can't seem to get any answers thru the online/phone staff.
A few weeks ago I notice that my "toolbar" actually has white spots/dots and when it's about to freeze, this white spots/dots start to jiggle.
Also, when using Microsoft Word, the option button which is "blue" also have white spots/dots and it jiggles before freezing/crashing.
I'm so confused...Do I restore my whole computer? Do I take the desktop into the apple store?
If anyone wants a pic....i have some....

Why are you convinced it's software? I would recommend running Apple Hardware Test in Extended Mode. Each pass will take 30-60 minutes in Extended Mode. If no errors appear after the first pass run in Extended Mode another 2-3 times to be sure. If you get errors write them down and make an appointment at your local Apple Store or AASP?

Keep hearing white noise when a flash video is playing

Whenever a flash video is playing (ie. Youtube) then I will hear white noise in the foreground and barely hear the original audio in the background. This also happens with facebook notifications and other flash sounds. I have checked my sound card and drivers and also switched the sound card over to see if this solves the problem but it seems to just be linked with Firefox at the moment

hello, maybe it's an issue with the protected mode in the flash plugin - you could try if [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) or [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] makes a difference.

Throwing stuff in trash makes loud awful white noise sound???

Just in the last few days when I throw something in the trash, instead of the normal sound it is set up to make, it will have a very loud fuzzy white noise type sound. The only way to get it to stop is to restart or shut down. You can't turn it down with the volume either, no response to that. What is going on? Is there something I can do to correct the problem? It doesn't do it all the time either???thanks

it's very interesting that you're experiencing this while playback.
I've (and many others....) got the same problem during recording, which by the way is a very painful experience or everybody that's wearing headphones..... normally people get the error message "disk is too slow" when that problem occurs!
Since there is no official and unofficial cause for this problem and also no solution currently it's hard to say what's behind it.
the only one thing i tried yesterday was playing around with the buffer size. in my case i experienced that crash yesterday a couple of times (in like 1-4 minute distances) when my buffer size was set to 128 samples. when i used a buffer size of 64 sample i dindn't get this error anymore. (don't ask me why, i can't explain it. another interesting thing is that the cpu usage doesn't show more when using only 64 samples)
try changing the buffer size, maybe it helps.....

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise.

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise. I have seen lots of old posts which go on about converting files but am wondering wherher at the current time with the latest versions of itunes and apple tv whether this should by now be a virtual play out of the box solution.
I have tried connecting my atv to the amp by optical cable but that didnt produce anything better and am assuming that a hdmi cable should be able to reproduce everything an optical cable does.
Is this something I should be able to achieve without having to recode the files?
Tracks are imported to itunes as apple lossless, have tried setting the atv audio settings to auto and 16 bit, neither works yet I was told some time ago by an apple rep that the atv shoud be able to handle any type of audio as it just passes it to the amp to decode. I am not stupid but not that technical when it comes to audio and bitrates etc so any explaination would be appreciated.
Thanks in advance for any help

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

IMac Freezing/crashing, please help. Tried everything! :(

Hello Fellow MacTalkers,
I am writing this post to ask you for a help with an issue that is very frustrating to resolve.
To begin with, I have purchased my MacBook Pro 2.4 GHZ, 3GB, Leopard running notebook about 7 months ago.
Until recently I have discovered that my computer is crashing randomly.
I am not a very tech oriented person, who knows much about console, logs and sorting out the hardware / software related issues.
About 2 months ago I started to experience some random freezes on my computer. Those freezes were occurring on different type of situations so it was hard for me to identify what could be causing the problem. The most common freezing that I have encountered, was and is that my computer screen just freezes and I can't perform any reset or rescue. Simply hard reset.
I started to think that this could be a cause of getting an extra 1GB memory that I purchased from Apple store, and that the memory could be faulty. But just to make sure I have done a clean re-instal of my os. making sure that I have all my permissions everything that could be a "common" cause of any weird behaviors on a mac sorted.
After the reinstall it got even worse.
I decided to take my computer to Apple authorized centre in Sydney broadway NextByte shop.
I explained the problem, asked if that would be possible to check some sort of console logs and track back what could be the cause of the problem that I am experiencing.
I left my computer for 2 weeks in service. And after that 2 weeks they have replied to me saying that they have detected no faulty with the hardware what so ever. I keep on persisting that I understand that the service people have done all the tests on external peripherals, checked the system performance through some kind of testing tools and it resulted with no problem. I rang the Apple complaints department asking if they could do anything about it as I am very worried that this issue won't disappear. They have informed me that there is nothing thay can do and they are basically sending my back home.
I collected my computer 2 days ago and started setting up some programs like adobe and all my apps. At first it was running all well, but then it started (leopard or hardware) to freeze again. On no particular occasion. I had to crashes in 3 hours.
I remembered the time of the crash and after the reboot, I checked my console and here is what I could find:
12/05/08 11:00:07 PM com.apple.launchd[1] (0x10b260.mdworker[1036]) Exited abnormally: Segmentation fault
I don't know if that is related to this post in any way, but as I said at the beginning I have no technical knowledge on where to investigate it further.
I would like to ask you for your recommendation on what should I do next.
I hope there is nothing that I am doing wrong with my computer as I am keeping it organized nad well maintained.
I thought also that that could be overheating related issue so I bought a notebook cooler, but that doesn't seemed to resolve the problem.
I am running out of ideas. Apple won't help me in solving the problem, I am also not sure how should I approach this case from the legal perspective. Can I go to fair traiding institution and ask them for help to enforce apple on returning my money for laptop, should I perform any tasks on my computer to fix the problem with some software.
Help, I am really running out of ideas. I am doing graphic design daily and this problem is driving me crazy.
I would appreciate your feedback or any suggestions on what should I do next.
Sorry for my cracked english. Im still learning my lingo in Australia
PLEASE PLEASE, help me on this one.
Kind Regards,
Michael Saganowski
<Edited by Moderator>
Message was edited by: sgnwsk

For what its worth, it sounds like the Leopard woes I was having before I left and went back to Tiger. I was in leopard for three months and I had too many problems to list here, but some common ones were Random system freezes/crashes (especially in itunes coverflow), Finder freezing, Adobe CS3 crashing and being generally buggy, not being able to run Final Cut Pro and After Effects at the same time.
My advice to you, check your memory if you feel like it could be the problem. If your memory is OK, then wait for the 10.5.3 update which is supposed to be out really soon (like within a couple of weeks or so from what I hear.)

White noise, sort of packet loss when talking with...

Hi,
For some unknown reason when I talk with one specific person the call doesn't exactly drop out it sort of cuts the audio and gives me white noise (sort of like when you get packet loss when transferring files or gaming), I have 0 idea why it does it. Does it the reverse as well, but only for me and this person. Everyone else thats in the call doesn't get effected and its frustrating me.

When in a call goto call > Technical info. This will show you various info about the call connection (and a lot of useless info aswell). Amongst the info is packet loss, and relays (if relays = more than 0 you are not directly connected).
Being on the same Skype, version might help.

Photo Booth freezing/crashing Mavericks OS. How can I fix this?

I downloaded Mavericks via Apple on November 5. Before installing it I made sure my Mac system was totally functional: ran disk repairs, checked if I had installed apps that wouldn't run in Mavericks, etc. Everything went well during installation, and I was able to use my laptop for two days UP UNTIL I tried to use Photo Booth! I got a message that Photo Booth was gathering my images (presumably to move it to a new location based on new configuration of Mavericks), and there was also a progress bar. Suddenly I realized that the progress bar would not advance and that my MacBook Pro (mid 2007) had frozen. I restarted it, only to have it freeze upon startup. I tried resetting the PRAM, and that only allowed me to make it to the desktop, but with no visible hard drive on my desktop, no dock at all, and I couldn't access any of the menus in the Finder window, not even to restart or shut down. Then I tried several options:
Hard reset and tried to boot in safe mode. NOTHING. It was just impossible to safe boot it. At times I'd get up to half of the progress bar and then it'd freeze. Hard reset Command + S
Hard reset Command + V
Hard reset and reset the PRAM again, etc.
Eventually I'd make it to the desktop, the dock would show up, also the files on my desktop, but it'd not take longer to freeze again. It was all very odd because there was always a point when it'll would just freeze.
Then I decided to try Command + R to repair disks. I Verified and repaired the discs. Then I restarted, and it froze. I decided to reinstall the OS through the Recovery mode screen. I did it. No success the problem persisted. I redid all this last steps again: Command + R, verify/repair disks, reinstall OS X. Once completed: MBP froze. The whole process was so time consuming that I gave up and just turned off my computer. The next day I was able to turn my computer on with success. Some of the folders that were open before the Photo Booth crash were on open. I closed everything and turned my MPB off using the Finder menu. Then I turned it on again, and once I got to the desktop and found no folders open, and I reopen Safari because I remember I was using it before opening Photo Booth. To my surprise it opened and all the pages I was visiting before the crash were there as if Safari resumed just how it was before the crash. I turned it all off again using the Finder menu. I was wondering if those Safari and the folders that were left open were for some reason conflicting with the system's start up. Then I turned it on again and this time I proceed to work with my computer but not before verifying/repairing the disks through the System Preferences menu.
Everything went well. Later that day I decided to open Photo Booth to see if it'd work smoothly. It didn't open very smoothly but I was able to play around with it for a while. I turned it off and everything was great. The system was a little slower than what I was used to but I guessed it's because Mavericks demands a more advanced hardware. Then the next day the problem restarted!!! I was able to get to my desktop normally and decided to open Photo Booth to complete the task I wanted it to use it on the day of the first freeze/crash. And it froze my computer and it all restarted. This time, even redoing all the steps and even after reinstalling the system 3 times, I still can't get my computer to work. But at least one thing I know: this problems is being caused by Photo Booth! I'm desperate and I don't want to format and do a clean install because I will lose some important files. Does any of you have ANY idea of what's going on and what can I do to fix this? It's unnerving to have it fixed once (not knowing how) and suddenly find myself dealing with the same problem again!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

Freezing/crash of iMac under Snow Leopard when backup with Time Machine

Hi!
The backup on my external hard drive with Time Machine cannot be completed.
After few ten Go out of 360Go the backup stops suddenly and the computer freezes/crashes.
I have got an iMac Intel Core 2 Duo with Snow Leopard 10.6.8 − 64 bit. The external hard drive is a LaCie 500Go.
Also, backups for another Apple computer can be done with this LaCie external drive. So, it is not the cause of the freezing/crash of the iMac.
I tried to solve this problem applying the following steps:
1- I started with the installation disk.
2- I repaired the internal iMac drive and the permissions with the Disk Utilities soft on the installation disk. All was OK.
3- The LaCie drive was erased, formatted again with one GUID partition (500Go) and the disk verified. All was OK.
4- I re-install the OS with the installation disk -> 10.6 Snow Leopard
5- Updates to 10.6.8, etc… security update 2012-004 and the 13th Java update to v1.6.
6- I deleted in the folder /Library/Preferences the file com.apple.TimeMachine.plist
7- I deleted the file com.apple.finder.plist in the administrator account Preferences folder.
8- The iMac was shutdowned as well as the external LaCie drive.
9- I restarted and changed the name of the external LaCie drive.
10- I choose the LaCie backup drive with Preferences System > Time Machine with right exclusions.
Unfortunately, the problem remained and the backup was again unsuccessful followed by another freezing/crash of the iMac.
So how to solve this problem?
Here is what I obtained from the system.log with the Console utility (crash/freezing at: 10:48):
=============================================================================== ==============================
Tue 4 09:58:24 imac com.apple.backupd[233]: Starting standard backup
Tue 4 09:58:24 imac com.apple.backupd[233]: Backing up to: /Volumes/LaCie/Backups.backupdb
Tue 4 09:58:24 imac com.apple.backupd[233]: Ownership is disabled on the backup destination volume. Enabling.
Tue 4 09:58:25 imac com.apple.backupd[233]: Backup content size: 343.5 GB excluded items size: 2.3 GB for volume iMac
Tue 4 09:58:25 imac com.apple.backupd[233]: No pre-backup thinning needed: 409.52 GB requested (including padding), 465.02 GB available
Tue 4 09:58:25 imac com.apple.backupd[233]: Waiting for index to be ready (101)
Tue 4 09:58:25 imac mds[40]: (Normal) DiskStore: Creating index for /Volumes/LaCie/Backups.backupdb
Tue 4 10:00:32 imac com.apple.backupd[233]: SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x10083f704, p = 0x10083f70c, pEnd = 0x10083f70d)
Tue 4 10:00:32 imac com.apple.backupd[233]: SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x10101b304, p = 0x10101b30c, pEnd = 0x10101b30d)
Tue 4 10:00:33 imac com.apple.backupd[233]: SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x1007c6f94, p = 0x1007c6f9c, pEnd = 0x1007c6f9d)
Tue 4 10:07:49 imac /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[202]: No valid tickets, timing out
Tue 4 10:14:53 imac mdworker[242]: multibyte IDs are unsupported.
Tue 4 10:17:05 imac backupd[233]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Tue 4 10:17:05 imac mdworker[243]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Tue 4 10:22:00 imac com.apple.backupd[233]: SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x10377e518, p = 0x10377e556, pEnd = 0x10377e557)
Tue 4 10:22:01 imac com.apple.backupd[233]: SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x10393e518, p = 0x10393e556, pEnd = 0x10393e557)
Tue 4 10:30:38 imac mdworker[242]: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
Tue 4 10:30:38 imac mdworker[242]: JPEG datastream contains no image
Tue 4 10:30:39 imac mdworker[242]: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
Tue 4 10:30:39 imac mdworker[242]: JPEG datastream contains no image
Tue 4 10:32:10 imac mdworker32[452]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Tue 4 10:38:16 imac mdworker[243]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Tue 4 10:38:16 imac mdworker[243]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
=============================================================================== ==============================
Waiting for a solution....
Bye
JacRb

See the problem and its solution:
https://discussions.apple.com/message/21491140#21491140

How do I get rid of the white noise that plays over my music?

Hey.
I got 5 CDs today and I wanted to upload them onto my iTunes to put on my iPod. But when I put in 4 of the CDs I got white noise over the top of the music making it unlistenable. But the 5th album(Double CD) worked perfectly fine. I know the problem isn't the CDs because I played them through my PS3 and they were absolutly fine. If anyone can help. Its greatly appreciated.
Thank you.
- DowellG8

Go to Edit > Preferences > General > Import Settings and check the box for error correction, and then try one of the problem CDs again.

Shrill stuttered white noise freeze/crash??

Similar Messages

Maybe you are looking for