Shuffle goes back to begining when switched off

Is this the norm? My shuffle doesn't remember where it was on the play list when it is switched off and on again, unless it is on shuffle. It returns to the begining of the play list each time. Also on shuffle it doesn't play the whole play list and seem to be in a 'loop'.

I have the same problem. everytime when I switch my ipod off an on again it starts at the beginning and not at the song i've heard befor. I have also restartet and restored my ipod yet, but also this don't work. I also do not press pause befor switching off my ipod, but all this does not help. do you have any other solutions?

Similar Messages

  • Is there a way to prevent store from going back to beginning when browsing aps

    I'm on an ipad2. When I browse a category in the app store and find something I would like to know more about, I tap on it and it brings me to the detailed page. After viewing the information I want to go back to the list of apps. When I do it takes me back to the beginning of the category at app number one, I then have to go thru. Page after page to get back to where I was previously, if I'm on app 556 of 3456. You can see that it would take a while. Is there a way I'm missing to take me back to where I left off?

    When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.

  • Timeline playhead goes back to beginning when it hits end

    Is there a preference or something somewhere I need to
    turn off to prevent the playhead in the timeline from
    going back to the beginning of the timeline and start
    playing again from the beginning, after it plays through
    the entire timeline once and it's the end?
    Thanks.

    Why not mark it as 'Answered' (which you should do anyway) then post what you did to fix it. That would help others who encounter the same problem.
    Ctrl+L toggles timeline looping.
    Andy
    Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • Accidentally switched off iMac at mains. Now only goes to grey sceen when switched on. Have removed all USB's from ports and cable from screen rear but still grey screen. What next?

    Accidentally switched off iMac at mains. Now only goes to grey sceen when switched on. Have removed all USB's from ports and cable from screen rear but still grey screen. What next?

    I would reset the PRAM
    http://support.apple.com/kb/HT1379
    or
    I would try and reset the SMC
    http://support.apple.com/kb/ht3964

  • I use an ipod touch.  I charged it using my pc but on disconnecting it went to black screen with circle going round.  I cannot switch off, reboot or anything.  Help please

    I use an ipod touch.  I charged it using my pc but on disconnecting it went to black screen with circle going round.  I cannot switch off, reboot or anything.  Help please

    connect the ipod back to the computer used to sync the ipod
    hold both power and home for 30sec's when u c the apple logo let goof both buttons and let the ipod reboot
    it this does not work un plug the ipod allow the battery to run out plug in to charge for 1hr and try the reset again
    if this does not work try a restore to a back up or a restore to factory settings via itunes

  • Why is my ipad still using battery power when switched off & locked away with no one using it?

    Why is my IPad still discharging battery when switched off and locked away - with no one using it?  Charged it to 100% on holiday and locked in safe.  2 days later it was at 76%!

    How is it "switched off"? Are you pressing the button on the top so the screen goes black? If so, that isn't shut off, but put to sleep. I will still be doing things in the background and using battery power.
    To shut it fully off, press and hold the button on top, you will get a notification on the screen that says "Slide to power off". Slide the button and it will turn completly off.
    If this is how you switched it off, let us know and we will see what else we can figure out.

  • I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off

    I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!

    Hello there, xkatiex255.
    The following Knowledge Base article should provide the steps for you to resolve your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I enlarge text size and it goes back to small when I change page,how doI make it permanent?

    windows 7: when I enlarge text or font size to my preference it goes back to original when I change a page, I want to set it and forget it thanks.

    You can use one of these extensions to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
    *http://kb.mozillazine.org/Zoom_text_of_web_pages

  • No click when switching off

    Since upgrading to IOS7 my wife's iPad Mini no longer clicks when switching off or closing the cover. Her sound settings are the same as my 3rd Gen iPad which still clicks, any ideas how to recover the sound please?

    Settings>General>USE SIDE SWITCH TO>Lock Rotation.
    Make sure sound is not muted in Control Center (little bell)
    http://i1224.photobucket.com/albums/ee374/Diavonex/ac7f6dc314aca5d618ac2f55616be 20e_zpsa92a3ebd.jpg

  • Zen Micro lose Power when Switched OFF??

    Hello,
    I was wondering if anyone else is experiencing the same problem as me. I fully charged my Zen Micro last night and then left it and just switch it on for the first time now (8 hours later), and the battery indicator shows 2 bars left?
    Seems like the Zen Micro loses power even when switched off!?!
    Can anyone confirm that this is the case and whether I can do anything to stop it from happening? Is this normal with Hard Dri've MP3 player or only with the Zen Micro?
    Thanks.

    <EDIT: (April st, 2005):<<FONT color=#330000>JazzMC has taken the initiati've and written a sort of FAQ and put together a website with all the information to date gathered in one place regarding this power drain of the Zen Micro while off (in standby). It's a great read for those who want more information about the subject and probably easier than wading through this thread.<FONT color=#330000>You can view the document by clicking here: <Zen Micro Power Loss<. <FONT color=#330000>Thanks JazzMC!
    Ditto here. I did do a disk cleanup last week and the micro seems to be holding it's charge longer now. It's still draining the battery while sitting idle though according to the bar indicator, but slower (go figure?). This is my only real issue with the Zen Micro as I love it otherwise!
    One wierd thing I noticed was I charged it full then left it sit for about 3 days (checking it off and on) then on day 3 it was at one bar. So I plugged it into my home sterio and turned it on to see how long it would play for. I was really surprised to see it last a few minutes shy of 9 hours...
    Could this be a battery calibration thing instead of it just loosing charge? Like the meter misreads the batteries actual charge over time instead of it loosing power?
    Donno it's wacky, please fix Creative!
    Message Edited by Moxy on 04-02-2005 02:47 PM

  • 5800 unusual behaviour when switching off

    Recently I have noticed my 5800 appearing to cycle through different apps when I switch it off. For example, when I press the power button and select switch off it goes to the Vodafone welcome screen as normal but then it jumps back to the main home screen followed by a rapid cycle through contacts, messaging, calendar and even the alarm screen where it will stay for about 5 seconds and then switch itself off as normal. 
    More recently, and more of a concern was the phone attempting to connect to the internet without me wanting it to. I followed instructions on here about setting the packet data connection to "when needed" but this made no difference. So then I decided to reformat the software as suggested on here also. So I did the *#7370# trick and reformatted the software. This seems to have cured the connecting to the internet problem but the switch off problem still persists. 
    I should add that my Firmware version was up-to-date at version 21.0.025 according to PC Suite.   
    Any ideas what's up? 

    i dont know if it is unusual, but my n97 actually does the same thing. itsjust shutting down the apps as it is shutting down the phone. i would not be too alarmed with this issue if i were you. 
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Stopping clip from going back to beginning

    When I watch my video in canvas, instead of stopping at the end of the sequence, it goes back to the very beginning.  I don't know how to turn this off.  I want to keep the playhead at the end, so I can add more video to the sequence.  Thanks

    You don't add 2 video clips in the Canvas.
    You either drag your clips straight from the Browser, Viewer or Canvas into the Timeline.

  • Encore CS4 Loop Point goes back to beginning

    Hi all,
    Thank you for your time reading this. I've searched the forum and didn't see a resolution for this type of issue. Please accept my apology if it is noted somewhere and I didn't find it.
    I created a Motion Menu in After Effects CS3 that is 00;05;07;00
    I then saved the layers as a psd files (I didn't create buttons within AE)
    I created the buttons I wanted within Encore.
    Turned off all of the layers in Encore except for the buttons that I created
    I created an AVI file out of the After Effects composition which is set as the Motion menu in Encore
    The only problem that I am having is that when the video ends it goes back to the very beginning of the motion menu instead of the Loop point I set at 00;00;14;00 (14 seconds if I did that right)
    I have Animate buttons checked
    Loop point: 00;00;14;00
    Loop #: Forever
    On the basic tab, for both End Action and Override I went to Specify link and chose the Motion menu(AVI) that I created. I checked the box at the bottom "Set to Loop Point"
    I'm not really sure what I'm doing wrong. This is my first time with a Motion Menu, so I'm sure I'm doing something wrong.
    Thank you for your time on this
    Best regards
    Jeff

    Jeff,
    Thanks for explaining.
    I'm now using CS5 and I'd heard the two menu thing wasn't necessary any more so:
    A week or so ago, I was trying to figure out the same thing.  I posted this question here http://forums.adobe.com/thread/852185?tstart=30.
    Unfortunately, there were no answers, and by then I had found in the Encore Help under Loop point (as you did) this group of instructions at the bottom
    "Set menu loop back
    You can set a loop point in a motion menu to a point from which you want the motion menu to loop, rather than the beginning. This is useful when the starting point and ending point of the motion menu are separated by a long interval.
    Select the menu from the Menu panel.
    On the Properties panel, set the loop point.
    Select Specify Link from the End Action Options menu.
    Select the target from the list, and then select Set To Loop Point, and click OK"
    However, I can't get this to work similar to you problem.  That is, if I select the "Play all, Scenes " menu as the target, since it has a motion menu, I can select "Set to loop point", since it's not greyed out.
    However, if I select the next menu "Scenes" with no motion menu, the "set to loop point" is greyed out.  If I select the Play all etc with the motion menu,  then the loop point doesn't work ie it still loops back to the beginning of the motion menu.
    I'm not sure what the work "taget" means from the last sentence in the suggestions.
    I was hoping an Adobe person would chime in, but so far no luck.
    I'm doing this in a SD project and not BluRay.
    Sorry to ramble.
    John

  • HVR M15 deck when switched off causes 800 fire wire drive to un-mount

    Hi
    I know this was a previous posting but I couldn't see a solution to it and it has now been archived. When I'm using FCP or even when I'm not, when I switch off the HVR M15 deck it causes the Lacie drive connected via Firewire 800 to un-mount. If FCP is open the media automatically goes offline. Does anyone know a reason for this or even better a solution.
    Many thanks in advance.
    Sherlock
    G5 1.8 Dual, 4 gig Ram   Mac OS X (10.4.8)  

    Use an internal dedicated drive for media.
    Purchase a PCI FW card and create a second FW bus.

  • Nokia Lumnia 610 problem when switched off

    when I switch the mobile fully off then switch it back on again and/or the battery is discharged, it doesn't record any calls or texts received when the phone is switched off [fully] or the battery is flat. Can anybody help please

    It wont record anything if switched off,some operators provide a call catcher service,ie you get an sms that you have had a missed call.
    If you turn on your phone and no sms come through it simply means you got none.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for