Shuffle is turned on with no selection or indication

I have a premium account. I notice this mostly on the android app, but see it on the Windows desktop player too. I play an album and do not turn on shuffle, but it still plays the tracks in a shuffled order. When I look at the shuffle toggle, it is off. Usually playing what should be the next song fixes it so tracks play in the correct order, but not always.
Has anyone else seen this? Is there a way to prevent it or a better workaround?

jimm287 wrote:
Hi everyone.
recently upgraded both itunes and ios. Verson 10.1.3 itunes and version 4.2.1 of ios on the phone.
when shuffle is turned on the phone only plays a single song and they either repeats the song from the beginning or stops completely. Also from the top of the screen the *fast forward bar is missing* so i can only listen to tracks from the beginning which is kinda annoying. This has only begun since updating all the software on the phone. any help would be greatly appreciated.
James
just tape the screen with your finger quickly...The bar should come back.

Similar Messages

My iPod shuffle will no longer turn on with switch.

My ipod shuffle 3rd generation, will no longer activate by the off on swotch. I have to plus into electrical outlet to get it to turn on to select what I want to hear. It no longer turns off after playing selection it continues to play until battery wears down. Seems the switch is flat, and can't be raised to be activated.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

My shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

my shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Can't get shuffle to turn off

can't get shuffle to turn off, have reset ipod, synced with itunes, everything i can think of.

How in the world did you figure that out? I was going crazy trying to get it to turn off. Should I keep Shake to Shuffle turned off? If you want it to shuffle do you just reverse the process? One last thing, what is the little icon on the other side for? I had to turn it off as well to get shuffle to stop. Thanks planb.

Macbook pro hesitates being turned on with power button

Hi, macbook occasionally takes a very long time to turn on with the power button.. this makes me very nervous.. can anyone allay my fears?

Make sure your boot volume ("Macintosh HD," unless you gave it a different name) is selected in the Startup Disk preference pane.

Issue when Run Report with Hier selection   in the Portal

Hi Portal BI Experts,
we are finding a strange issue when Running the Report.
the following Variables are in the Report Selection screen :
Company code [optiona]
Prod.Variance Type [ mandatory]
Hierarchy Node Variable [optional]
TheQuery which I am Running thro Bex Analyzer with the Hier selection as below , is working fine. But
When I run   thro portal with Hier selection value   with    00/50/G310/702258(0CUST_SALES
It automatically display as +00/50/G310/702258(0CUST_SALES    with + symbol. and thro the error:
Input "\+00/50/G310/702258(0CUST_SALES);\+00/51/G410/703096(0CUST_SALES)" for Ship-To Party (Sales has invalid format
If I remove the plus symbol report runnig fine.
Your immediate help highly appreciated.
Thanks
Hema
Edited by: hemav on Mar 21, 2011 2:29 PM

Hi Jaya,
This is the Error message I am facing when I Execute ithe query report n the Web[Portal]
Input "\+00/50/G310/702258(0CUST_SALES);\+00/51/G410/703096(0CUST_SALES)" for Ship-To Party (Sales has invalid format
ie. In the variable screen the selected hier value automaticvally display with plus symbol
Actual   Hier value :   00/50/G310/702258(0CUST_SALES)
Once close the Hier selection list window , the Hier value turned to +00/50/G310/702258(0CUST_SALES)
If I give ok with this Plus symbol it throwing the above error. By removing the Plus symbol manually it is working fine.
I unable locate the settings.
that too when I run the same report in Bex Analyzer woking fine , no issues in the Hier value.
Thanks ,
Hema

ITunes 11.0.4 is shuffling music even when shuffle is turned off

Grrrr. This is really driving me nuts.
I'm using 11.0.4 on my MacBook Pro (OSX 10.8.4).
iTunes will shuffle the music I'm playing even when shuffle is turned off. It will finish track 1 of an album (for example) and then go to 9. or 11. or 7.
What the heck is going on??

Hi Allen
Many thanks for the links, although i was aware of the sleep proxy and its uses. The problem i'm having does seem to be related to this, although the key difference between what i am (or was) experiencing is the definition of 'occasionally' as mentioned on the page you linked to.
What i was experiencing was the mac mini would go to sleep then 60 second later it would stir, as if being woken to reregister its services with the sleep proxy, then it would go back to sleep. Then around 60 seconds later it would do this again, and so on and so forth until it was fully woken in one way or another.
Now i do seem to have made progress after digging around a little further. I did figure out that it was a bonjour service/ or device that was causing the mac mini to stir And as i mentioned in my previous message this behaviour would cease if itunes was closed or home sharing was turned off. So the only thing on the network that was connected to this was my 2 apple TVs. As a test i unplugged both boxes and put the mini to sleep again. Then i waited and waited and the mini stayed soundly asleep.
I have since plugged the 2 ATVs back in, one at a time, and the mini now seems to be sleeping for around an hour before it wakes, presuming to do the sleep proxy service thingo.
i'm just running another test to prove to myself that it is actually back to a more normal state with both ATVs plugged in, so fingers crossed.
if anyone knows, does this now sound like a normal setup with the way the sleep proxy works?
i suppose i should have done this at the start, but i have 1 airport extreme, and 2 ATVs (and few ipads, iphones and the like all onthe network), if that helps.
Leigh

Using Refine edge with Quick Selection......

I think I'm doing something wrong, because I can do a quick selection, but when I hit the "Refine Edge" button and make a change to the selection, my change doesn't "take"...
I have an image, one layer (background), absolutely normal, boring image (for example, a white swan sitting in the blue water). I go in with Quick Select and select PART OF
the swan. I have areas that aren't selected, and areas that are selected and shouldn't be. So, I need to refine my selection. I subtract and add bits of selection with the
Quick Select tool, but leave a big piece of the swan's body NOT selected, and a bit of water SELECTED. So, I need to go in with a tool and refine the edge of my selection...
SO, I hit "Refine Edge" from the tool bar and select "Overlay" for my view mode. I can now see what's selected, and know what I'd like to change. And, I have a red overlay
so I have a visual guide to changing things....
Go to the "Refine Radius Tool" and paint over an area I want ADDED to my selection (a piece of swan immediately adjacent to my original selection)... It runs red, like I'd expect.
I release the mouse and a second later, the red goes away, but the selection has NOT been changed. I've tried this directly from the Quick Select tool. I've double-clicked the
background layer and changed it so it's not background any more - made no difference. I've created a layer mask on the no-longer background layer (the mask contains my
Quick Selection just fine). I've then used the Mask panel to specify "Mask Edge" and again tried the "Refine Radius Tool" to add an area to my selection. Again, it turns red
while selecting, then stops being red when I let go, and the area I selected is NOT added to the selection...
I watched a presentation by a Photoshop person who DEMONSTRATED exactly what I'm doing, and it worked. I looked at Martin Evening's CS5 book, and as near as I can tell,
I did exactly what he described... He got a selection, added to the selection, and it worked fine...
I figure I've got something configured wrong, or something else goofed up. What am I missing here?

It's not my intention (intent?) to beat up on the "Refine Edge". I figured when I couldn't get the same pristine results as all the demos that I was doing something wrong, and kept watching more people doing this 'cause I figured I was doing something dumb...
Mostly, I've been trying this on different images over the last couple weeks just to see if I could figure out how to get it to work.
From the responses in here I suspect I'm doing it correctly, but the images I'm trying it on just don't lend themselves to perfect edges without some additional work..... The Quick Select and a bit of edge cleanup is still faster than the "good old days", so its definitely a step forward.
As far as the swans, yes, no matter what I did, I was getting a lot of extraneous selections and wonky edges and stuff. One of these days I'll try pulling an eagle or a great egret out of a clear sky and see how that goes. I suspect it'll work a lot better...
I only fiddled with the rodeo image 'cause I figured it was "like" hair. But my background is pretty busy. With a little additional work I DID get a very, very good selection, and was able to soften the background, and do a gradient so the ground under the horse is sharp, gradually blurring as it moves to the grandstands...
Thanks for all the replies...

Why does my curser turn to a hand selection tool when I use Yahoo

my curser is a pointer in all other programs except yahoo. When check my mail the curser turns to a hand selection tool

Do you mean, all web sites give you a pointer, but Yahoo is a hand?
It might be a problem with your Yahoo Options.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Weird parts of screen and icons turning black with white bands?

So I've been getting these weird flashes on my screen, mostly when using the internet, but also sometimes icons appear similar to the flashes as pictured below... it should be the calculator app icon but instead it's black with white streaks.
Or here's the link for a better view:
http://picasaweb.google.com/lh/photo/4ldthLn49zAmGLhSypdgog?feat=directlink
I see it mostly when loading a page on the internet... for a split second the whole frame turns black with white horizontal streaks. I tried to get a screen capture of it but it happens too fast. The whole monitor doesn't turn black, just the window I'm using.
I did a little research and think it might be screen artifacts and maybe my graphics card is going bad... but can someone confirm or deny this? Does it sound like something else? It seems to be getting worse... so I want to get it taken care of.
Any help would be great.
Here's my graphics card info... *i think*
GeForce FX 5200:
Chipset Model: GeForce FX 5200
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0321
Revision ID: 0x00a2
ROM Revision: 2060

Boot off your original G5 Install Disk while holding down Option/alt key to select AHT, then run the extended Apple Hardware Test.
It sounds like the Video card, but you might also Get Temperature Monitor - 4.51 to see if it's heat related...
http://www.versiontracker.com/dyn/moreinfo/macosx/19994
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.

Macbook Pro only turns on with battery unplugged

Hi Apple Community,
So I have a late 2011 Macbook Pro, and my problems is very specific and somewhat strange, but simple. If the computer is off, I can only turn it on if I open up the case, unplug the battery, and plug in the power adapter. Afterwards I can reconnect the battery, close up the case, and it works fine (and stays operational on battery power when unplugged; the battery evidently holds and delivers power just fine). I've brought it into the store and they were stumped, but I wanted to see if anyone has seen anything like this before I send my 3 year old computer away for a potentially very expensive repair at a depot.
To review:
Computer will not turn on if it is off and the battery is connected, whether it is plugged in at the time or not.
If the battery is disconnected, it will turn on with adapter power.
Once turned on, it functions normally.
If I literally "Restart", it succeeds in coming back on, which I assume is because formally selecting the "Restart" function is different from actually turning the computer off.
And final note that I don't believe should affect the computer's ability to turn on, but I don't have an OSX installation on the computer. It's running exclusively WIndows 7.
Any input appreciated
Thanks
Brian

I would install the HDD with the OSX and see if the same condition persists. If so, perform a SMC and a NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
Ciao.

How come my ipad mini wont turn on with anything i do?

I've tried to restart it many times and it wont turn on with anything i do. I cant turn it on and it wont connect to my laptop. HELP.

Is the Battery Charged?
fishyweaves wrote:
I've tried to restart it many times and it wont turn on with anything i do.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

My Imac turns black with this "_" symbol on top of left corner

Imac 2011 21.5"
this happens during I installing windows 7 boot camp,, during that time,, my imac get hang and cant install,, i restart n suddenly it turns black with "_" symbol,, the installer cd is still in my i mac,,

Turn off the iMac.
Turn it on and press alt/option key. Keep it pressed until you see the OS X boot disk. Select it and it should boot OS X.

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

Shuffle is turned on with no selection or indication

Similar Messages

Maybe you are looking for