Shuffle issue using 5th Gen with Ford's SYNC

I'm using a 5th gen iPod in my 2009 Ford Focus with the SYNC system. Almost everything works just as it should, except SYNC's "shuffle on" command. When used with artists, genres, or playlists, SYNC only seems to build a very short shuffle list of some 12-15 songs, which it repeats until I repeat the selection of artist, genre, or playlist. Then a new short shuffle list gets built and played, over and over, etc., etc. SYNC seems unable to shuffle all songs by my prolific artists, in my well-stocked genres, and in my lengthy playlists in one go, unlike my iPod's built-in shuffle setting.
Ford recommended trying SYNC shuffle with the iPod's shuffle setting turned off, then with it turned on. Doesn't seem to make a difference. They're out of ideas for now. Anyone out there have this problem? Have you found a solution? If so, would you share your experience, please? Thanks!

Absolutely have had this issue.
Here's a fix (but I hate it we have to do it this way):
You have to make sure your iPod's volume is turned all the way up. The static will clear. I haven't found a way around this. The Ford system ***** for that reason. Shouldn't have to rely on our iPods running at full volume in order to work. Seems to kill the battery quicker. But hey, at least you'll have clear sound.
Lemme know if it worked for you.

Similar Messages

Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

B-rock, thanks for posting the above. I actually have the same issue, running Windows XP and I don't have that backup location, \Application Data\Apple Computer\MobileSync\Backup\. When I go to Documents and Settings\(username)\ there's a AppData folder followed by:\LocalLow\DataMngr\ .
I have the latest update, 5.0.1 and I have the iPod Touch 3rd gen.
I have tried removing itunes and all that is associated with it then reinstalling and keep getting the same message. I've reset my ipod thinking that would help but still, no backup.
In iTunes, Edit, Preference, Device there are no backups.
What am I doing wrong, can you help?
Thank you!

First ipod,used 5th gen 30gb, restored, synced, everything looks fine except no sound!

Used 5th gen ipod 30gb classic. Restored, synced and everything looks fine....except there is no sound! Is it damaged or is there something I can do? I am just learning...can anyone help me? Thanks

Does Kenwood say it will work with a 5G iPod (or iiPhone 5)?
Did the iPhones have iOS 7? Sometimes an iOS update breaks compatibility
Sometimes this works
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

When using iPhone with Ford automobiles' Sync, the connection drops each time the ignition is shut off. In order to restore, the bluetooth must be turned off on the iphone, then restarted. Any suggestions?

When using iPhone with Ford Automobiles' SYNC, the connection drops each time the ignition is shut off. To restore, you must turn off the bluetooth on iPhone, then restart each time. Any suggestions?

There is an update avaialbe for Ford systems to correct bluetooth problems. You need to update your system.

My 32GB 5th gen iPod won't sync

My 32GB 5th gen iPod won't sync. There is still over 10 GB free and my itunes is only 17 GB yet it won't let me sync anything. Can anyone help?

My ipod 32gb 5th gen will not sync to itunes or any mac computer. An error message appears saying that my ipod touch requires itunes ver10.7. Does anyone know how to get this on my ipod touch 5? I cannot find it, does it need to be installed onto my ipod from a computer?

IPod 5th gen with limited storage space due to unknown space used? I don't have anything else loaded, how do I find out what this is?

I have a 5th gen 32gb iPod that I use only for music. Usually I update it via wi fi but it recently updated to the new IOS 8. Now it is saying there is limited space capacity for the music because there is 18.85 gb of used space. I don't have any apps or features on the iPod and all the options such as Siri or App store are turned off. I simply carry it in my car for travel music and use my iPhone for all other business that would need apps/etc.
I reset back to the factory settings and did not link back to the iCloud so it did not "reset" the old copy if it was corrupt. My iPhone has a ton of music plus apps, contacts, etc and does not show this same type of memory usage. Any idea what could be using so much and how to get rid of it??

OTHER
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

Music playback issues using the new white iPod Touch with Ford's Sync System

When I connect my new 32GB white iPod Touch to the USB port of my 2011 Ford Focus' Sync system, I hear a lot of static and popping noises while the music is playing. It's almost like listening to old vinyl records. Has anyone else experienced this issue?

Absolutely have had this issue.
Here's a fix (but I hate it we have to do it this way):
You have to make sure your iPod's volume is turned all the way up. The static will clear. I haven't found a way around this. The Ford system ***** for that reason. Shouldn't have to rely on our iPods running at full volume in order to work. Seems to kill the battery quicker. But hey, at least you'll have clear sound.
Lemme know if it worked for you.

Extend my wired Airport Extreme (5th Gen) with a 2nd Wired Airport Extreme (also 5th Gen)

I have a 5th Generation Airport Extreme in my house hard wired directly from my fiber optic provider
Then I have that 5th Generation Airport Extreme hard wired directly to my Desktop Computer in a separate building in my back yard (using an Ethernet Cable run through an underground conduit).
Using that setup, I DO get Wi-Fi for my iPhone 4S & iPad 3 in that separate building in my back yard, but it is sometimes so weak, it really is not useable.
To improve the Wi-Fi signal for my iPhone 4S & iPad 3, I plan on adding a 2nd 5th Generation Airport Extreme in the separate building in my back yard.
I will disconnect the Ethernet Cable that is currently plugged directly into my Desktop computer & plug it into the 2nd Airport Extreme.
Then, I will use a short Ethernet Cable to directly connect my Desktop Computer to the 2nd Airport Extreme.
The desktop computer is an older Dell Dimension 9200 running Windows XP Professional with Service Pack 3
With this set-up, will the strong Wi-Fi signal I now get in my house from the 1st Airport Extreme NOT be reduced?
And since the separate building is only 300 square feet, I assume the Wi-Fi signal there will also be as strong with the 2nd Airport Extreme being so close to everything?
Could someone point me to SPECIFIC instructions on how to CORRECTLY set this up so that the 2nd Airport Extreme will EXTEND my home network?

So, I should unplug the 1st Airport Extreme from the outlet before doing anything?
Yes.
Since the 2 Airport Extremes will be in 2 separate locations, which do I plug into the outlet first?
I would suggest plugging the one in the house first, then the second one in the backyard building. Be sure to connect the Ethernet coming from the first into the second before power-on either base station.
Could I connect the Ethernet both to the 2nd Airport Extreme & then to the desktop, then plug in the current Airport Extreme in the house, then run out & plug in the 2nd Airport Extreme in the separate building?
The key is to leave everything powered-off; connect the Ethernet cables, and then, start by powering up the house unit, then the backyard unit, and then, the PC. Make sense?
P.S. I have the Version 5.5.3 of Airport Utility for Windows (using Windows XP Professional with Service Pack 3)
There does NOT seem to be a later version than that.
That worked great for the installation of the 1st Airport Extreme several months ago, so I shouldn't have any problems, should I?
There is a later version (5.6.1) for Windows, but required Windows 7 to run on. Since you can already administer the 1st 5th gen Extreme with the version you have now, you shouldn't have any issues continuing to use it for the second unit.

How do I use 5th Gen iPod and 2009 Civic USB?

I tried everything I can think of to get my iPod working with my 2009 Civic. From what I've read in the manual, I just be able to plug it into the USB and the car finds it, displays the Honda "H" logo/mark on the screen and away I go. I wish it were that simple.
I have a 5th Gen iPod with verison 1.3 firmware. It's formatted for Windows so it's a FAT32 storage format. I restored the iPod and put the music I wanted back on it so I could test again and still no dice. I don't have another iPod to test with.
Is there something I missed? Anyone help me? Thanks in advance.

The problem ended up being the controller board/card/box (whichever of these) in the car that was malfuctioning. I gathered that they had to do some diagnostics, comparitive testing (with another vehicle and audio system known to work), and test my audio system before isolating and replacing the controller.
I bought my Honda Cerified Used, so it was all covered by the dealer and Honda. I asked what it would cost had the car not been Cerfited Used. I was given an estimate of $350 USD. I know labor alone was $198 USD.
So, if you are expericing the same issue of no connectivity between your Honda and i(Device) and your car DOES NOT display any sort of error message on the audio system, this may be your problem. If you wish to get it fixed without a warranty to cover it, the cost will neighbor $350 USD. An alternative and cheaper option is to buy a headphone to headphone jack audio cable, plugging one end into your AUX outlet (if equipped) and the other your i(Device). Plugging into the AUX outlet does not charge or let you control your i(Device) through the car stereo.
Thanks planb77 for responding to my post.
Cheers.
Zman

Driver issue nano 5th gen win 7

I bought a used nano 5th gen 8gb today and went to connect it to my laptop and got nothing on itunes. It comes up in the control panel under devices but has the excalamation point and says needs troubleshooting. I troubleshoot and it says the nano is missing drivers and cant instal them. So far ive re installed itunes and tried rebooting the computer. Ive also tried resetting the nano itself.

Try one or more of the following:
Restart your computer
Uninstall & Reinstall iTunes
Reset iPod (will not delete everything)
Check in My Computer (Windows XP) or Computer (Windows Vista & 7) and see if it shows
Restore iPod (will delete everything)
Make sure iTunes and iOS firmware is up to date
Extra Link:
iPod not recognized in 'My Computer' and in iTunes for Windows
Hope this helps.

Issue using logic pro with bfd 2.0 - not enough RAM?

Right, I posted a little while ago when I first installed BFD 2 on my mac pro, and was having problems whenever I tried to use any effects (either in Logic itself or in the BFD 2 program) whilst using BFD 2. What I think I forgot to mention was I was trying to do different processing on different "areas" of the drum kit, and I wanted to use the Logic effects, so I had a number of tracks with BFD 2 loaded as the instrument.
Well, I phoned a local Apple-certified shop to ask for advice on this, as nothing I'd tried had fixed the issue. The guy suggested I try a clean install of the OS and Logic and BFD 2, to see if that fixed the issue. I* have done this, and logic now works with BFD 2 and effects when I have just one BFD 2 tracks, but as soon as I add another and program some MIDI notes into the 2nd instance, even just a bar or two, then play the whole song, there is a large amount of digital noise. Now, on my mac pro, i only have one HDD - the system disk - and 4 gb ram. I had just now come to the conclusion that, with the minimum spec for Logic being 1GB, and for BFD 2 being 1GB, with the OS running as well it's actually likely the system is short of RAM. But now I see that it can also be an issue if your Logic project is stored on your system disk.
So I'm thinking of getting both an extra, internal (SATA) HDD, and an extra 8GB RAM at least. Is this likely to solve the issue? I'm not currently using an interface with it, and as I say, with just one BFD 2 track, it's fine, the issue is caused when I try to add more BFD 2 tracks. Obviously, without an interface, I am unable to try recording audio to see if there is an issue with that too.

You also need to upgrade to the latest version of BFD2. There were many fixes. You should also install BFD2 samples on another hard drive. The 4 gigs of memory you have is more than enough. Your main problem is probably not installing the samples of a separate drive. Hope this helps. BFD2 is an incredible program once you have it set up properly. As noted previously switching from 24 bit to 16 bits will help also.

Newbie Help - 5th gen with no stuff!

Hello all - I recently got a 5th gen iPod from a friend that owed me $$ and all i got was the unit (black/silver - 30GB). Besides a charger, headphones, etc - what do I need to join the revolution? I am totally new to this but feel that this iPod is the bees knees. Any help with software, connections, videos, etc? Any direction would be greatly appreciated. Thanks for helping a newbie out!
New? Windows XP DuLL desktop

Well the main thing you need, besides headphones, is a dock cable to plug the iPod into your computer. You can then put stuff on the iPod with that cable and the cable also charges the iPod from the USB port.
One nice product out there is Griffin's Powerblock which can be seen here...
http://www.griffintechnology.com/products/powerblock/
$30 and can be bought at places like Best Buy. The nice thing about this is that not only is it a charger that plugs into the wall and gives you a standard USB port to charge your iPod and any other USB chargable devices without needing a computer (great for traveling), Griffin was even kind enough to include an iPod USB Dock cable that you need anyway.
In the meantime, if you haven't already, download and install iTunes on your computer and start importing your CD library into it.
Patrick

IPod touch 5th gen with OS X 10.5.8

I've recently bought an iPod touch 5th gen but am struggling to get it to sync with my macbook pro, OS X 10.5.8.
I've done some digging around and it seems I will need to upgrade to 10.6.8 in order to sync it. However, I need to upgrade to Snow Leopard first, and then to Mountain Lion.
It just seems a bit convoluted and I wanted to check I've got this right, before purchasing 2 operating systems just to be able to sync my iPod!!

All you need is Snow Leopard, which is 10.6.8. That and later OSXs require A Mac with an Intel processor. A Mac with a Power PC processor (G4 and G5) can only go to 10.5.8.

IPod classic 5th gen. with sad face goes into disk mode but wont register in itunes

I have an iPod classic 5th gen. A while ago it stopped working and the sad faced iPod started showing up. i've tried putting it into disk mode but when i do it wont pop up into itunes like it should and as soon as i unplug it the sad face appears again. is there anyway to fix it or is it done?

There is a pretty comprehensive post written by another forum member which is about the sad iPod icon. You may find it useful.
The Sad iPod/folder and ! icon.
Btw, there's no such thing as a "4th generation 20gb classic." Your iPod is a 4th gen and not an iPod classic which is a completely different model.

How can i obtain a user guide for the ipod nano 16GB 5th gen. with out printing it off the computor

How can i obtain a user guide for the ipod nano 16GB 5th gen. without printing it off the computor.

You can't, at least not the one provided by Apple.
B-rock

Shuffle issue using 5th Gen with Ford's SYNC

Similar Messages

Maybe you are looking for