Shuffle question - audio

Can a Shuffle be heard through external speakers? If so, how? Thanks!
iMac Fan

You mean like when the shuffle is NOT in the dock? YES.
However there is another solution: http://www.griffintechnology.com/products/dockadapter

Similar Messages

Captivate 5: Shuffling Questions in a Quiz

Hi all,
I know it's possible to shuffle answers in a quiz, but is it possible to shuffle questions? I would like to shuffle my questions so that users are presented with quiz questions in random order.
Thanks!
Brittany

Hi Rod,
Never thought of using the Question Pool, but that's a great suggestion. I think that may do the trick!
Much appreciated!
Brittany

Shuffling Questions won't work

Hi there,
I'm using Presenter 7.0.6 and I have the following problem:
I have a group of questions (30 questions), and I choose 25 out of these 30 questions for a quiz.
So far, so good.
But: I also chose: "Shuffle questions" in all the fields I found, but still each time I (and others) open this quiz, it's always the same 25 questions and always the same order.
So, they are not shuffled at all...
Also, the viewser.xml correctly shows shuffleQuestions="1"
What am I doing wrong???
Cheers,
Blik

Dear Shubhi,
thank you for your help. Since your solution resolves my problem, I take the liberty to post it here for other people who may have the same problem:
Shubhi Shukla Dubey wrote:
Question Shuffling is not working properly if “Enable Reporting” is unchecked.
I suggest you to do following steps:-
Go to Manage>Quiz>Reporting
Check “Enable Reporting for this presentation” checkbox
Publish the presentation
Best regards
Blik

ITunes Party Shuffle - Questions

I have read several discussion but have not found one exactly on point with regard to the following:
1. If I choose any Smart List as my source for the shufle (say Hip Hop/Rap), it plays album in their exact orders. It does not shuffle b/w albums. Example: it will play just Beastie Boys.
2. Sometimes when I pick a playlist as the shuffle source, I get the following error message "The playlist __________ does not contain any songs playable by Party Shuffle." Why? What does this mean?
3. General, non-Party Shuffle question: why is it that in my Library some songs are checked (the box is checked), while other songs are not checked? What is the significance?
Thanks everyone!
IBM ThinkPad Windows XP

1. Check your shuffle settings to make sure you've got them enabled the way you like. Edit > Preferences > Playback You can shuffle by song, artist, or album.
2. Are the songs on this playlist checked? They won't play if they're unchecked.
3. If you want songs to play and be part of shuffle, etc. they need to be checked. ITunes ignores them when they're unchecked.

Some songs can't be loaded on 2nd gen ipod shuffle (question with answer)

I'm getting the following message when trying to load some songs on to my 2nd gen iPod shuffle:
"Some of the items in the iTunes library, including 'Allegro', were not copied to the iPod "iPod" because they cannot be played on this iPod." When I click on the details triangle I get "Allegro" was not copied because the audio format is not supported by the iPod "iPod".
This is happening for many songs that were previously loaded on this iPod. The songs were all loaded into iTunes from CDs. I have tried the iPod reset utility, deleting all songs and reloading, selecting a single song to sync, no luck.
When I do a "Get Info" on these songs they say they were encoded with either iTunes 6.0.5 or iTunes 7.0.2.
OK. Even before I was able to post the question, I found the answer. If I select the songs and from the "Advanced" menu select "Create AAC version", the AAC version can be copied to the iPod. Get Info shows the encoding has changed so AAC and iTunes 9.0.1.
Hope this helps someone else with a similar problem.
david.

You can't "sync" that is automatically update an iPod from multiple libraries or computers. If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
Using iPod with Multiple computers
Managing content manually on iPod

Workflow Question: Audio Documentaries

Hello there,
I am trying to figure out the most efficient workflow for 2 types of audio pieces that will end up in a podcast:
1) The first type is one long interview (an hr) that will be extensively edited (e.g., sentences and words rearranged; "ums" deleted, sentences shortened and tightened ) and inserted into a podcast with some narration and sound fx. I'm unsure if I should be marking (so I know what's where) and editing the interview in the waveform or multitrack. In the waveform, marking is easy; I can break the entire clip up into a series of chunks. But then what? Export them all as individual files? OR Export the entire file with the markers into multitrack? The problem with the first solution is that I then have a tons of files that are out of order. The problem with the latter is that any subsequent edits I make in the waveform puts the clips out of sync in the multitrack. Another option is to edit it all in the multitrack, but it seems that there's less ability to use features like zero-crossing and the markers apply to all tracks not individual ones. Suggestions?
2) The second type of piece is similar to the first, except it involves 10 or more different interviews that are going to be edited into one piece.
Any tips? Suggestions? Advice? Workflow resources?
Any and all input is really appreciated.
Best,
David

Steve's speech editing 101:
Long rambling interviews are a huge problem from this POV - if you did the interview yourself, you generally learn pretty rapidly that actually structuring the interview itself whilst recording it is a pretty good idea! So is the concept of getting the interviewee to include the question in the answer - this generally makes editing a whole lot simpler.
De-umming and -erring in waveform view is fine - you won't need to redo any of this, whatever you do next. So you can do this, and save the resulting file as a first pass (always keep the original though - you never know...). At this point, as you've realised, you have options. The only thing I can sensibly do is tell you what I do when presented with this sort of thing; it makes sense to me, and you may just about retain your sanity. And yes, the whole thing revolves around markers. The first thing you do is to identify individual chunks of interview, and mark each end of them. What you do then is turn these into a marker range, and most importantly give this a name that means something. There's more than one way to go about this - if it's really complicated then give the ranges numbers, and have a separate reference list. If you think you can put adequate information in the marker, then do this - but bear in mind that when it's all scrunched up, these aren't always so easy to read. The basic idea here is that, if you can manage it, these are like paragraphs - a short collection of related sentences, preferably based around one idea only. You don't want to keep them too long though - I tend to break longer collected sections into separate sub-numbered sequences.
The most important thing as far as marking is concerned though is to have a structure for it, especially if you have multiple speakers in different interviews. If you keep to a unified scheme, you should easily be able to identify the speaker and the particular point being made easily. And that means that you should be able to assemble a final piece without going completely mad...
Anyway, what you do then is batch process these marker ranges into separate files, using the marker name for the file name. And now, you can import the whole lot into multitrack view, and start to assemble your interview. At this point it should be fairly straightforward; you can reassemble the clips in any order you want relatively easily, and with a bit of luck, you won't have to do too much editing during assembly - although that option is still open to you.
So to sum it up, the key to this is organisation and structure. At first it won't seem like you're doing any 'editing' at all - except that really you are - you're doing the most important bit. This is a conceptual thing; editing isn't about cutting out the bad bits, it's about assembling the bits you want. And when you think about it like this, hopefully the foregoing will make some sense. Hopefully it will also be obvious that this scheme works for either single person or multiple person interviews.

Playlist Shuffle question - M Zen M: 3

Hi - have a question on playlists and shuffling them. I have several playlists ranging from around 75 to 500 songs. I tend to play them in shuffle mode, and have noticed that some songs get played a lot, and some almost never. I assume that there is some sort of glitch in the randomizer that determines shuffle order that makes it not truly random - I've seen that before. So I get that this is hard to fix, so I'd like to fix it myself by simply loading a playlist on my computer and shuffling the order of the playlist, then saving it. I figure that the randomizer will still have the same glitch, but the playlist order will be different, so I'll get different songs played often. So I can manage the list this way every time I get bored with the sequence. I've used this technique before with another player I had (Archos Jukebox) and it works fine. Problem is that when I load the playlist on my computer it will only allow me to change the position of track at a time (even if its multiple tracks, its a block at a time). I'd like even to sort them in alphabetical or size or artist or duration sequence, since I think that would solve my problem, but it doesnt seem like this is an option. Any ideas? Thanks?Colin

Anyone?

Multiclip multi questions (audio question and syncing question)

I have two questions concerning multiclip editing:
1. How do you select the audio from one angle to remain the audio throughout as opposed to the audio track changing every time you select a different video source?
2. If one camera in a three camera set-up stops recording for a technical issue and then goes back up, is there a way to sync both of those files to one angle of a multiclip? If not, is there a way to make them separate angles and sync via input on three angles and on output for the fourth angle?
Thanks in advance.

1. In the Viewer's Playhead Sync Menu (upper center), select "Video"
instead of "Video + Audio".
2. Sorry, neither of your ideas will work. Multiclips work with actual media
clips, so two clips will be two angles; and the sync method (in, out, timecode)
is the same for all clips.
I suggest you assemble the two files from the camera in a sequence (using
identical settings as the clips), sync them up exactly (with a little space
between them), and export them using the same settings to make a new clip,
which you can then import and use for your multiclip.
Have fun!
Les

Pre-Order Question - Audio

Since it might be soon I can pre-order for Canada I have a question some of you current owners might be able to answer. I want to use my iPad to take in our RV with us, to watch Movies and Tv Shows from our iTunes while we are on the road. I am assuming that with each synch it will keep track of what episodes have been watched, like my Apple TV's do? But more important is the audio for TV shows or Movies. While running on battery and with nothing to plug an iPad in to, how is the audio quality on the speaker for two people to watch a TV show with? Would it be possible to plug two sets of headphones into it? Is there a headphone jack? Any answers are appreciated - thanks in advance!
Brian.

how is the audio quality on the speaker for two people to watch a TV show with?
As you'd expect from a very thin device with very small speakers, the sound is not going to be great. It's adequate in my limited experience, but whether it would be loud enough in an RV for two people I'm not sure yet.
Would it be possible to plug two sets of headphones into it? Is there a headphone jack?
There is a headphone jack, and it might be possible to use two sets of headphone with an appropriate splitter (check places like Radio Shack). Perhaps, though, you could use a set of battery-powered speakers. That might be more satisfactory.
Regards.
Message was edited by: Dave Sawyer

I have 3 questions,Audio/Video Remote Control HID driver windows 8 fails to install code 32, trying to use usb tether connection rather then using WiFi to connect Laptop and iPhone. can only connect using wifi. Last quest. about the hotspot bar.

In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install
biut I am not sure how to properly do this.
Also I use my LTE to tether (paid) to my LapTop as well, The issue I am having, I cannot get the USB to work as a network connection. However using the WiFi method works fine but I rather use the sync cable at times such as when I am charging the phone and/or wishing to not trainsmit my ssid for others to see even though I do use a password.
Last question about using the built in WyFi tether connection, Is it posable to remove or ake the annoying blue indicater bar at the top disappear? This blocks from doing certain tasks that forces me to shut off the HotSpot app. to allow me to pull down the info bar at the top, Please Help Thanks

In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install
biut I am not sure how to properly do this.
Also I use my LTE to tether (paid) to my LapTop as well, The issue I am having, I cannot get the USB to work as a network connection. However using the WiFi method works fine but I rather use the sync cable at times such as when I am charging the phone and/or wishing to not trainsmit my ssid for others to see even though I do use a password.
Last question about using the built in WyFi tether connection, Is it posable to remove or ake the annoying blue indicater bar at the top disappear? This blocks from doing certain tasks that forces me to shut off the HotSpot app. to allow me to pull down the info bar at the top, Please Help Thanks

A few questions - audio quality, and remote capability

1) What is the audio quality of songs streamed from airplay?
2) Is there any way to change the volume of a song using the iphone/ipad remote?
Thanks!

Hello..
Not sure about the actual specs of Airplay SQ.
Using the ATV2 to access your iTunes Library you must control the volume with the volume control of the device through which you have the audio routed.. ie TV or Stereo. There is no volume level on the ATV2 remote or in the interface of the ATV OS that I can see.
Using the ATV2 as a speaker for iTunes from your Mac or PC you can control the volume through iTunes on the Mac or PC.
Using the Remote App on iPhone 4 or other device you can control iTunes on your Mac or PC. In addition you can select the ATV2 as a speaker for iTunes directly from the Remote App and in turn have control of the volume from the iPhone 4.
I like the last way best. Easier to navigate library, make selections and control volume all from anywhere within range of your wifi connection.
Message was edited by: rz22g

Playlist shuffle question

As a new Ipod Nano owner I'm having a problem with the shuffle feature. I currently have three playlist loaded and I can't get the Nano to only shuffle one playlist. If I'm listening to "Blues" I get songs from "Classic" or "Christmas". Is this normal or am I not setting something right? The songs do shuffle Ok but they also jump playlists. Thanks

Hey there,
Try this:
Head to your iPod's "Settings" menu and scross down to the Shuffle option and change the settings for it to "Albums" and then head to the playlist you wish to listen to and see if that helps.
B-rock

Random library shuffle Question

Is there a way to "force" the library to be played all the way through, randomly, before repeating? On my laptop 273 songs have been played more the once while 799 songs been played once leaving 1957 songs that have not been played at all. I'm hoping not to hear the same song twice until I cycled through the whole library. I know that only 273 songs were played more then once but it just sounds to me that I'm hearing the same handful of songs over and over again.
Any help would be appreciated.
Thanks'
jr
Latitude D610 Windows XP Pro

Yes.
Create a Smart Playlist with the condition of 'playcount' is 'zero' or 'less than 1' or whatever you need. Also check 'live updating' so the playlist will continually remove any song that is fully played.
Use that Playlist in shuffle mode, rather than the Library, or direct the Party Shuffle to use that playlist.
As you get to higher playcounts for songs in your library, you may need to adjust the constraints.
Or, you could reset all playcounts to '0' once you have heard them all and continue on...
Several ways to skin that cat...

2 Overlay Creator questions (audio/video)

I have a video file placed with a controller selected. It works fine in the Content Viewer, but not on the iPad. When tapped on the iPad, the image just flashes on the point of contact but does not activate the video.
The other issue regards the Overlay Creator not recognizing placed audio or video files. I've placed both audio and video files (some from the Adobe tutorials from the prerelease). When selected, the Overlay Creator does not apparently register them as valid audio or video files since I can't access the OC dialog boxes.
Any suggestions as to what I'm doing wrong or possibly missing?

When your creating new overlays.. do you have an InDesign object selected first? Alot of people forget that the overlay panel shows extended options of base indesign objects. Example you have to create a hyperlink object before you can see the hyperlink options. Also make sure your updated to folio producer tools 1.01

Shuffle Question

Is it possible to set up Shuffle based on a Playlist? I have a Rock and Country Playlist and at times would like to intiate Shuffle for only the Rock or the Country Playlist. Thanks,
Charley

Found the answer in this forum.

Shuffle question - audio

Similar Messages

Maybe you are looking for