Shuffle's Button/Slider becoming Flimsy/Loose!

Ok i have noticed my iPod Shuffle's button/slider on the back, become a little flimsy/loose.
I usually always go from OFF to Shuffle. Of course not in one move, but a gentle way. Anyways so now when i place my thumb on it and gentle nudge it, it moves slightly up and down, as if its becoming more loose by the minute.
It was definately not like this afew months ago.
Does this happen to ALL iPod Shuffle's???? If so why has Apple not built them to be more durable???
Or do i have a faulty version???
Thing is my Uncle got me my iPod Shuffle 1GB as a gift when he was away on vacation. And he didnt give me the invoice (why should u, its a gift) and i dont think i would qualify for RMA. But hey the iPod Shuffle hasnt even been out for a year (so technically that should mean no date of purchase is required, right?)
Thnx

try pushing down hard on it that might work maybe it was not installed correctly if there is an apple store near you go there and ask about it(you might have to go to the genius bar)
hoping it will work,
sam

Similar Messages

  • After updating my browser my "open a new tab" button has become useless, how do I fix this?

    I recently updated to Firefox 3.6.17 and now my "Open a new tab" + button has become useless, it is still there, it just doesn't work anymore, how can I fix this, any suggestions?

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • Hi i am from india i bought my phone last year from hongkong as it was not launch in india.now with the ios5 upgrade the home button has become very hard. i take a lot of care of my phone.the istore is not ready to repair it .please do something

    hi i am from india i bought my phone last year from hongkong as it was not launch in india.now with the ios5 upgrade the home button has become very hard. i take a lot of care of my phone.the istore is not ready to repair it .please do something.it was working proper before the upgrade.i even bought the ipad for 42 k from the istore in india.(mumbai).i love apple product and the moey i would by the mac book air also.but now i dont have any solution for my home button it is very irritating when it does not work .get an upgrade to do something it is factory unlock phone.regards vijay.

    Hi well let me be clear.last year the iPhone was bought from someone traveling to honkong.i did not get it cheap it was a new phone and what is the use of getting a phone after 1 year six months.thats when the iPhone came to India.I paid more than what u selling the iPhones in India.now I have bought the iPad in India now.we are ready to pay for the repair charges.my phone work excellent it's just the home button.please don't say I was saving some buck I paid from my hard earned salary.it was nearly 800$ in Indian rupees.i love ur products.i offen make people buy ur products in Istore talking Good about them.if I new this phone would have problem I would wait for it to com to India.i work when i was 18years in one of the best handbag stores in India as a managelabor 20 years and I know how important is customer satisfaction and service as till date I give it to them at there door step.i even buy ur expensive softwares.i never had a problem with my 3G and 3GS iPhone in the past.regards vijay

  • When I am using powerpoint, if I linger too long on a slide the projector looses the signal from my mac. How do I stop this?

    I have a MacBook Pro with MacOX version 10.6.8
    When I give a powerpoint presentation, if I linger too long on a slide, the projector looses the signal, moves to a grey screen and scrolls through its menu.
    I have tried lengthening the time my Mac has before it goes to a screen saver.  It is not that.  Does anyone know how to keep this from happening?
    It has happened with multiple projectors.
    Angie

    http://answers.microsoft.com/en-us/mac

  • It seems my Wifi on/off button has become disabled.  Any ideas as to how tom enable and turn on?

    It seems my Wifi on/off button has become disabled on my IPhone 4S.  Any ideas as to how to enable it to turn on?

    I been having the same problem with my iPhone 4S my iPhone its upgraded to the new version and my wifi does not want to turn on its dim gray I tried reseting it and pressing the home and the power button i have resset my network setting but its no help I don't know what else to do?

  • Remove the darn shuffle play button!

    Hi, I tried out your new design, which I have mixed feelings about, but nevermind that. The most annoying thing I come over in the new Spotify (for iPhone by the way) is the dumb, big, overlapping, unnecessary shuffle play button that pops up everywhere. Is this a bug or is this on purpose? Could at least had add an option for it. Also, it doesn't look streamlined at all with the current design. Did it even occur that not everyone wants a shuffle play button?

    Dear Spotify,
    This is coming from a devoted and loyal user of yours that happens to be yours truly. A music lover, fascinated by a beautiful lush melody from a Manic Street Preachers tune and saddened by listening to the blue beauty of Anthony & the Johnsons. And thanks to the beautiful gift of the streaming service you have provided for us my music life has not been the same. I have had the pleasure of listening to almost everything my momentary thoughts demand effortlessly, legally and by paying a very low price. So my sincerity towards your contribution to my music world is simply insatiable.
    Having followed music in forms of CDs, tapes, MP3s and occasionally LPs and EPs for years, I have grown this inevitable sense of discipline in the way I organize and listen to my music. And your program has a high emphasize on that. Everything is well-labeled. It's a joy listening to Spotify at any time for any occasion. I appreciate pop music as much as everyone else. But I also appreciate what is not pop. And how comprehensively good you are at that side of the story, too.
    I have begun a new phase in life in which I wouldn't like to scrutinize things and go deep into original intentions of doing things. So I normally take things as they appear to be. It’s much more convenient this way. But somehow I’d rather not start this routine when it comes to music. I know you value music more than anything else. And I know there are now thousands of people out there who reach for your service at every second. I don’t want you to change that. But as a small part of your strong community, I would like to share my slight disappointment with a button you have emphasized on in your new mobile interface. That being said, your new desktop interface is sexy, elegant and very modern. I have Spotify on my PC, iMac and iPhone.
    So this is what happened: With my last update of my iPhone app, there has appeared an annoying presence of a giant green button called “Shuffle Play” on each and every page containing songs I would like to play. And I cannot stand its presence. Yes I do like to shuffle my playlists sometimes. And I’m sure there was a firm reason deducted by you to put this button up there. But this emphasize to me is very degrading to music in the form of albums. There are more people out there like me who spend hours curating playlists and then putting them into the right order. Many people like me would like to listen to albums “as they are”, that is, as the original artist intended. If Arcade Fire wanted us to shuffle their albums, they would not number their songs on their Funeral album. And in the shuffle vs. not shuffle argument, I have always opted for the latter. And I assure you I’m not alone in this. Shuffling is a part of the work. So let’s just put it there as a mere option just like repeat, etc.
    Spotify is supposed to be a music player for everyone! It’s for that girl in Philippines who would like to listen to K-Pop while dry-cleaning and it is also for me who passes by your office in Birger Jarlsgatan in Stockholm thinking how cool would it be to visit the office. I clarify this a bit further with an example:
    Last week, my boss asked a colleague of mine “So what kind of artists do you listen to?”. And the reply was more than disappointing: “My favorite artists are usually the ones on Spotify top list!” That for me equals “I don’t even like music”. Music for her is a filler. And to me, music is not a filler. Music completely stands out for itself. But my message here is that both of us should get what they want from you. And we do! It’s just that, I have a feeling you are valuing her approach to listening to music more than I do. And that shuffle button strengthens this idea that mainstream pop, chart toppers and everything that is being played from a small pub in Dublin to a luxurious disco in Berlin is more important for you and so are these kinds of listeners. But that is contradictive to what you really are. That is contradictive to the fact that people find a rarity album from a forgotten garage rock band that they had never heard of and discover their music through you. So what does this big shuffle button imply? Shuffle everything? Forget about the tracklisting and the artist and shuffle it all regardless.
    Can someone please set me free from this disturbing thoughts in my head and clarify the existence of such button? I take you with me everywhere I go. I encourage everyone to be active and share their favorite music. And then I get this feeling that I’m not a favorite user of yours, that you’d rather go with the girl who chooses the top list over discovering good music and literally puts zero effect into her music streaming experience.
    I want you to acknowledge the presence of people like me in your community. I’m not expecting much of you. But I am worth your attention. I have tried almost every other streaming service out there and you outrun them with by a great distance. So I’d rather stick with you and drag all my music friends with me. Thank you!

  • What do I do when my Nokia n96 slide becomes loose...

    I've only had this phone for about 2 weeks, and I've realised that the slide of my nokia n96 has become loose, I know it's something that has happened to most n95, but the n96 is obviously new. How do I fix it? It's under warranty, can I get it fixed free? It's annoying to hear the vibration and the creeks of it!

    It depends on how loose it is. Most slider phones loosen up the more you use them.
    All you can do is take it to a nokia care point and ask their opinion about it. They may say it's perfectly normal or they may be able to tighten it up under warranty.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • Volume buttons on iPhone 5 loose and clicky

    My iPhone 5 (black) has been having problems, the side buttons (volume) have been really loose. When I first got the phone (December) it didn't make that noise or feel like how it does now.
    http://youtu.be/W2phgzTIfXA - that's exactly my problem, I've booked an appointment to be on the safe side. Can someone tell me if this is normal? Or if they've had the problem and what Apple will do?

    I'll try uploading a better image by tomorrow. If I show this thing in an Apple Store, do you think they might be able to do something about it?

  • Shadows darken when I grab any adjustment slider, become normal on release

    This started happening recently, and it's driving me crazy. Basically, clicking and holding any adjustment slider causes the image to instantly become darker, and then it goes back to normal when let go. The adjustments still work, they just appear to be happening to a darker version of the image until you let go. It's really weird. It happens whether you make an adjustment or not, and seems the most prominent in shadow areas. I made a rollover to demonstrate: http://royalsquid.com/temp/ap/ (mouseover to see what it looks like when I hold down the white balance slider, notice I haven't even moved it yet). Look closely for instance at the back of the lady's jacket on the left.
    I've only got RAW files in my library, but from several different cameras and it's the same for all of them, new or old. Changing the proofing settings doesn't make a difference. Any ideas? Latest version of Aperture (2.1.2), all updates installed etc. My monitor is an Eizo CG241W calibrated with ColorEyes Display Pro and an X-Rite DTP94B.

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • Mute button wont become unchecked

    Hi. my mute button on my mac mini will not become unchecked. so the sound is not working:(! please help!

    I have a mid 2007 2 Ghz Intel Core 2 Duo that has suffered the same problem. For the longest time it was intermittant, and usually would return after a reboot. Now it seems to be a hardware issue, as System Profiler reports "No Built-in Audio."
    Any advice on the ease of repair for this problem? If I crack the case, is there some wire to wiggle or connector to push on?

  • Track Button Slide Activation

    I quote Reference Manual, page 118: +"Buttons on Arrange tracks (Solo, Mute, Record Enable ...) support "slide activation..."+
    I can't get this to work with my RECORD BUTTONS. Mute, Freeze is OK when I slide my mouse across several channel strip buttons - but not the record buttons. Can anybody help?

    It works for me for all buttons except the record enable ones - I guess this feature changed along the way (or it might be a bug instead.
    Of course, for rec enable I just slide my finger across the rec enable buttons on my Mackie Control instead, which is essentially the same thing...

  • Help Choosing specific image for a button - slider not precise enough!

    I am using an image from my movie as a menu button. The slider is not giving me enough precision to seleect the image I want. It seems to move a few frames at a time. Is there anyway to make the slider more precise as it scrolls through the movie?
    Power Mac G4   Mac OS X (10.3.9)   Dual 867MHz 1.25 GB DDR SDRAM

    I've tried the arrow keys but that moves the cursor either to the very beginning of the movie, to the middle or to the end. I also tried arrow keys with option. control and command keys pressed down.
    There must be a more precise way of locating the still image for the menu button. Perhaps I could go back to final cut, creat a still image and import that as the menu button...but it seems like there must be a simpler solution within iDVD. Help.

  • Problem in shuffling the button and puting image on button in the same code

    I'm trying to make 16 block puzzel game. The following code is showing desired output when I'm running it in textpad but it's showing the output in eclipse. Please tell me the reason behind it.
    import java.awt.*;
    import javax.swing.*;
    import java.awt.event.*;
    import java.util.*;
    public class Puzzel extends JFrame{
              JButton[] arr = new JButton[15];
              public Puzzel(){
                        Image image;
                        Toolkit toolkit= Toolkit.getDefaultToolkit();
                        image=toolkit.getImage("icon.jpg");
                        ImageIcon icon=new ImageIcon("icon.jpg");
                        setIconImage(image);
                        setTitle("Puzzal");
                        JMenuItem pic = new JMenuItem("Solved");
                        pic.setMnemonic('a');
                        JMenuItem pict = new JMenuItem("Solved");
                        pict.setMnemonic('a');
                        JPanel jp = new JPanel(new GridLayout(4,4));
                        ArrayList list = new ArrayList();
                           for(int x = 0; x < arr.length; x++)
                              arr[x] = new JButton("Button "+(x+1));
                              list.add(arr[x]);
                        Collections.shuffle(list);
                        for(int x = 0; x < list.size(); x++)
                              jp.add((JButton)list.get(x));
                            getContentPane().add(jp);
                                 pack();
               public static void main(String[] args){
                    new Puzzel().setVisible(true);}
         }I want to add image on these buttons and I have tried it using the following code but its not running on eclipse but working fine when run through textpad. I dont know how to use it with shuffel.
    setLayout(new GridLayout(4,4));
             JButton img1 = new JButton("1.jpg", new ImageIcon("1.jpg"));
              getContentPane().add(img1);

    In the future Swing related questions should be posted in the Swing forum.
    I have tried it using the following code but its not running on eclipse I have no idea what "not running" means, but I'm assuming you are having trouble reading the image files.
    Read the section from the Swing tutorial on [How to Use Icons|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html] for the proper way to read images so that is works in all environments.

  • My Firefox interface is messed up. When I hover over or click a button it becomes all pixlated, the blocks move around, and lines appear around the buttons.

    When I hover over or click a button on the tool bar it becomes messed up. Blocks, or more like pixels, appear over the buttons. They are white and they move around. Little black lines appear around the buttons too. I tried uninstalling and re-downloading Firefox, a full reset, etc. Nothing has worked so far. To see pictures of the problem use this URL (it brings you to Imgur): http://imgur.com/a/LXHQg

    hello, try updating your graphics driver - this should be the right link for your system: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22375

  • I cannot unlock the screen rotation of my iPhone 5. I double click on bottom button, slides to right, but sliding to left doesn't show the rotation icon

    I cannot unlock the screen rotation of my iPhone 5. I double click on bottom button, recently used icons appear. It slides to the right, but sliding to left doesn't show the rotation icon.

    You swipe up from the very bottom of your home screen to access the control center - if your on IOS 7
    The way your trying was the old way.

Maybe you are looking for

  • How do you change page order in new Pages???

    Old pages was nice and simple in this regard - highlight a page and move it up or down the thumbnail viewer to change the page order. Now it doesn't do that. AGH!! Or am I missing something?

  • Trouble connecting wirelessly only at home MacBook

    At home Actiontec router connects wirelessly flawless when using Apple TV or this MacBook running Windows XP (via Bootcamp). Only connects to home network by first starting XP and then simply restarting to OS 10.6.6. Works good until any sleep sessio

  • SERIOUS PROBLEM HELPZ!!!!

    Basically, my phone froze so I logically turned it off, now I know my inbox and memory card is full and may have something to do with it. Then when I turn it on, it loads and then the screen goes black and will not load and then it dies. Turns itself

  • Error while executing one query in SAP B1

    Experts, select T0.U_ItemCode, T0.U_ItemName, T0.U_Forecast, SUM(T0.U_mrpqty)'Simulated Qty', (select sum(onHand) from OITW T1 where T1.ItemCode = T0.U_itemcode)  'Current Quantity', (select T3.ItmsGrpNam from OITM T2 inner join OITB T3 on T2.ItmsGrp

  • RMI in weblogic cluster

    Hi all,           Say I have a cluster of two weblogic server. I deployed two remote           object, of same class, on each of           these server, individually (not replicated) by the same name. This           remote object has a state variable