SHUFFLE USERS ! READ THIS

Some of you had the same problem as me:
iTunes did not transfered the songs etc, etc...
i found how to manage that problem!
1. Uninstall iTunes
2. Install YamiPod wich can be found here ( http://www.yamipod.com/main/modules/home/ )
3. Open YamiPod
4. Connect you iPod
5. YamiPod will say in the blue bar: "Connecting"
6. Drag & Drop the songs you want to transfer to your iPod to the bottom table..
7. There will appear a pop-up
8. in that pop-up, click on add all.
9. Songs added
This worked here by me so it should work by you guys too!
If someone from apple reads this: imo there is a prob with iTunes and not with the iPod software
Tell me if it works by you
Regards
Tom
pc Windows XP

Isn't Titanium Toast a little hard to eat?
My monitors are Dill.
I MEAN DELL.
Sheesh.
Shane

Similar Messages

ROKU SoundBridge users read this BEFORE installing iTunes7

The following was emailed to me today from ROKU
" With the release of iTunes 7.0 yesterday, Apple has changed some of the underlying technology that allows the SoundBridge to communicate directly with iTunes. We hope to have an iTunes 7.0- compatible release of the SoundBridge software soon; however, at this time all SoundBridges are incompatible with the music sharing feature of iTunes 7.0. We recommend that SoundBridge owners wait for a SoundBridge update before upgrading to iTunes 7.0. Users wishing to upgrade to iTunes 7.0 (or who have already upgraded) can install the free Firefly media server to share music libraries with SoundBridge. Firefly is available at http://www.rokulabs.com/firefly"
Had I have known earlier it would have saved a lot of time reloading iTunes 6
Intel Imac 2Ghz 2Gb RAM, 500 Gb Hard Drive, Lacie 1Tb Hard Drive, 5G Ipod video Mac OS X (10.4.7)

+"I can't emphasize this enough:+
+It is recommended that you backup your system prior to installing any updates.+
+He who does not backup can't say he hasn't been warned!"+
Aw come on "a brody".... where's the fun in that? Anyway, I think you are spitting into the wind. Anyone who is not aware, at this point in computer history, of the fragility of digital data is probably not going to even be reading this. I'm afraid we are in for another round of "disaster" and "catastrophe" and "10.5.1 bricked my computer" and "10.5.1 ate my files" and "my mother had a hernia and it's Apple's fault" threads.

Dell Computer Users Read This!

My dad had a proffesional come to our house and try to install itunes to our dell computer. unfortunatley, the guy said that itunes is not compatible with dell computers for some reason and all the people itunes he tried to install had dell and it never worked. so my dad got a new computer which is not a dell im just writing this to tell all the dell computer users that itunes is NOT compatible with it. if you got yours to work with a dell more power to ya.
Other OS

I have iTunes/iPod installed on two Dell Laptops and my brother-in-law has a 2 Laptops and Desktop by Dell. All running iTunes without issue.
Maybe your OS is not compatible.
Hope you did not buy a PC from that "professional", as well.

VERIZON users read this first!

I just bought a new Droid X from Verizon about three weeks ago and after two weeks the phone was dead due to poor workmanship from the company. Now Verizon does not want to replace it, and I get nothing but delays and excuses when it comes to get another one. I also paid 400 something for this phone and they wanted me to accept a use factory 2nd for a replacement. Verizon will screw you bad with these phones. Do not buy a Droid X they are worthless and the company will not work with you for a replacement.

I hear you pain, I have been with other companies too and the best service was Alltel but now Verizon has taken over and they are improving in customer service. I had to switch to Verizon because of my 4 relatives sharing my plan two needed new phones. I was forced to switch to Verizon. This came at no cost to me but I felt that I was starting over with a new company because I was an Alltel customer and was with them for years.
Back to your pain, I had the Blackberry Storm then switched to the Storm 2 and had a lot of problems with it, I was in the store every other month and they gave me refurbished phones, always a new problem. I call the *611 number and was given a choice to upgrade my phone even though I haven’t been with them for 2 years. I upgraded to the Droid X. I love it, no problems. Bottom line is … there is a lemon where ever you go, be it a relative or a car or an electronic piece of equipment, and they are out there. My husband has a Storm and never has problems. If I had to do it again I would choose the Droid X again and again until something better comes along.
They offered a refurbished one because that’s their policy and I understand the whole spend 400 for a now refurbished phone. It sucks. But it’s better than nothing and refurbished phones have been looked over by experts ( I use that term carefully) and you still have a warranty so if it fails then do it again. Try the * 611 number, it may help, they don’t want to lose your service and don’t want you to stand in their store complaining.

Hand - Off - Auto / Remote - SCADA Architecture Question *All You Super Users Read This*

I am new to the forum. I have searched the net for almost 6 months on this and haven't really found a good response....
I have been around the block a few times with various control systems(Arduino/Labview/AllenBradley/general SCADA) and am trying to figure out how to build a "proper" control system on the cheap. I used to use alot of Labview in School so that is how I ended up here.
What I want to do is have Hand Control at the Machine (Arduino Control System / or something) be able to switch that to Auto/Remote (Labview or some other language) then have that talk to SCADA (Thingspeak, SQL, havent figured this part out yet).
My question is how would you do it? I am a pretty good programmer and know just about every language so nothing is off the table. Seriously I would like to see some creative action.
I dont think LIFA is the best cause I need LOCAL control of all the variables. I would like to have PID loops etc running on the Arduino. I need to be controlling serial attached machines. I have some RS-485/232 going to VFDs and a dSPiN as well.
However, when I want to control it remotely, I would like to be able to pass set points if in auto mode or even better, in addition, be able to override auto and drill down into each attached component and control it in Hand remotely.
I know I could do this by building everything in VIs then linking through LIFA and using the VI as my hand/auto. However, I do not trust the link between LIFA and the Arduino that much. Also I do not know the capability of LIFA to do the RS-485 and serial data to the dSpiN. I need to be on Ethernet/Wifi, and if the controller goes down we may have a legitimate safety problem; hence why I want local control as my backup.
Further more how would you do the SCADA? I dont want to spend 4K on a Full Labview License.....I would prefer just using the iPad app and some free online services...I will have a server running all the time as well.
If LIFA can be used to do some of this please let me know....Any links to past projects by people would be a huge help.
My Plan right now is:
Machine Data/Control sent to Arduino over RS-485 , 4-20ma and SPI.
Local Control on the Arduino. Local Arduino connected LCD displays Key Parameters.
Send Local Main Variables *Set Point / Run / Stop Etc / Key Data* over Serial or Hacked LIFA to Labview over ethernet or wi-fi.
Labview acts as main supervisory "go-between" and provides all main "in house" HMI support
Real time proccesing happens in Labview and is displayed on labview VIs; Realtime data is also sent out remotely over a service for world wide access.
Labview also sends all real time data to historical service of some kind either (web based or local based) (will be locally hosted)
Access historical data remotely by some means (API / Webservice)
Remote World Wide Access to Labview and thus machine, through Labview iPad app or VPN into house.
World Wide Historical Access through API or Webpage.
That is where I am at in my thinking. Please blow it up and make it better.
I appreciate y'alls help. I posted this in the Arduino Section and they told me to post here.
~Colin

Hello Colin,
Unfortunately I am not familiar with the overall architecture but, if you need to build a SCADA type system, you can use LabVIEW Datalogging and Supervisory Control (DSC) Module. It’s an add-on to LabVIEW and a lower cost alternate option to other SCADA programs out there.
The LabVIEW software is not a free tool, but will save you time developing your project. Also if you use one provider, your support request will be handled from one source, therefore making your development process more efficient.
Please refer to the following links in case you are interested in evaluating the LabVIEW Software and LabVIEW Datalogging and Supervisory Control (DSC) Module.
http://www.ni.com/trylabview/
http://sine.ni.com/nips/cds/view/p/lang/en/nid/210561
Regards
Luis S
Application Engineer
National Instruments

Toast users read this

Hi there, I know that many of us use Toast for burning DVDs.
In a recent post, I explained my problems with multisession burning using a MAC/PC format (compatible for both Mac and Pc)
The answer I finally got from the Roxio technical service is the following:
"Regarding your issue with burning milti-session CD's. Unfortunatley
this option is only available when burning "Mac only" CD's, a "Mac & PC"
option is not available."
I have found that a good alternative is to use the ISO9660 option which allows multisessions.
Have a nice day all.
Bernard

Isn't Titanium Toast a little hard to eat?
My monitors are Dill.
I MEAN DELL.
Sheesh.
Shane

N86 users, read this pls.

hi guys, is this a fw30.009 bug or something is wrong with my n86 ?
as u can see, its showing as s60 handset when its supposed to say n86 8mp
please reply. im desperate !!!
Attachments:
bug.jpg ‏224 KB

i don't have personal experience on N86. but i have N73 ME, when it connects to pc shows as Nokia N73 with thumbnail. but i have a Nokia 6303 classic, when it connects to pc shows as portable media player. but device works fine. nothing to worry mate. it is not a fault.
Glad to help

IPod Shuffle green/yellow flashing APPLE READ THIS AND POST IT!!!

This was posted by ipod user pcgoddess and this is the only way I got my ipod shuffle to work. It would not play it would just blink green and orange. Apple couldn't even put up a solution on their own website. If I were Apple I would be embarrassed.
"After searching high and low, I found a solution in another chat area. It takes a few minutes, but it works.
Place the Shuffle in your PCs USB.
A dialog box may pop up. Do not click it.
Do not click any dialog which pops up asking if you want to put songs from this pc onto this ipod, deleting the old ones.
Click edit, preferences, then select the "ipod" tab.
Check the box "enable disk use".
Move the slider to the right so that it is set to more data (maximum), and 0 songs.
Click ok.
Right click your start button and select "Explore".
Navitage to My Computer, and then seek the drive which represents the shuffle.
Right click the drive and select format.
Leave the options as they are.
Click Start.
After formatting, click eject ipod (icon in the bottom right of the itunes window).
Remove the shuffle.
Re-insert the shuffle. "

nice try but that doesnt work... i had to return mine and the very same day the new one broke! this product is all around crappy...
This was posted by ipod user pcgoddess and this is
the only way I got my ipod shuffle to work. It would
not play it would just blink green and orange. Apple
couldn't even put up a solution on their own website.
If I were Apple I would be embarrassed.
"After searching high and low, I found a solution in
another chat area. It takes a few minutes, but it
works.
Place the Shuffle in your PCs USB.
A dialog box may pop up. Do not click it.
Do not click any dialog which pops up asking if you
want to put songs from this pc onto this ipod,
deleting the old ones.
Click edit, preferences, then select the "ipod" tab.
Check the box "enable disk use".
Move the slider to the right so that it is set to
more data (maximum), and 0 songs.
Click ok.
Right click your start button and select "Explore".
Navitage to My Computer, and then seek the drive
which represents the shuffle.
Right click the drive and select format.
Leave the options as they are.
Click Start.
After formatting, click eject ipod (icon in the
bottom right of the itunes window).
Remove the shuffle.
Re-insert the shuffle. "

Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest

Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

CS6 FOR MAC USERS: UPDATED TO CAMERA RAW 8.4? READ THIS

PLEASE READ THIS...
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html

Thank you for the heads up, Yammer.
Fortunately I don't see this bug in Lion Mac OS X 10.7.5 running Photoshop 13.0.6.

Repeat One!... developers of apple iPod and iTunes read this!

It’s not an issue I think anyone can help me with but I hope the developers of apple iPod and iTunes read this.
I am a full supporter and user of both iTunes and iPod…. But some things have always bugged me. :P
Repeat one
Can you please, for everyone’s sake, fix the repeat one function? Yes, when the ipod gets to the end of the song I want it to repeat the song ones more. But when I select next (>>) I’m sick of the song and wound like the next one. But instead it just starts over on the same track.
Today I have to click menu, scroll down and select play on the next song to move forward… meaning I actually have to take the iPod out of my pocket and see what I’m doing.
iTunes music library.
Another thing which would have been practical in these holiday times would be a separate music library function for iTunes. In other words be able to select, load and save different library for different usages.
Why you say?....
1.I don’t need my holyday Christmas songs clogging up my library in the summer.
2.When I do sound work for animations I like to have my sound FX and background music outside of my music list.
3.Some people are, (believe it or not), ashamed of some of their music and would like to store theme where no one can se them. Say I invite the boys over for some iron maiden and they end up finding my backstreet boys album. (yikes)
4.Say you have some very privet videos or sound books you don’t want your kids to here or see.
5.When I need background music for some tabletop role-playing I wand them in a separate list as well.
6.ETC
And before you say it… NO… play lists, and do not include in shuffle isn’t the solution…. neither is users. Have you even seen how terrible Microsoft user system works? (Yes I know get a MAC, but you can’t always play that card.)
This function really shouldn’t be difficult to make since you have the “iTunes Library.itl” file already.
This is just my opinion so fare, but if anyone agrees or disagrees; Pleas post a reply.
It’s all in good fun… As I said, I love my iPod and iTunes except for these issues. (Well I could talk about volume but… naaa, enough badgering for one night :P)
Best of days
Tee

No Apple software engineers (the people who can implement these requests) contribute to these forums.
Use either one (or both) of these links.
iPod Feedback.
iTunes Feedback.
"This is just my opinion so fare, but if anyone agrees or disagrees; Pleas post a reply.
No please don't as that will acomplish nothing. The feedback links are the way to go.

Unable to log in user at this time / opening up all ports

I've got a lion 10.7.3 server and several Lion client boxes all attached via ethernet to an airport extreme.
I've got a bona fide certificate that seems to have installed correctly, and the client is talking to the open directory server
Without fail, I get a message "unable to log in the user at this time" on each of the clients...
UNLESS I open up all ports on my airport extreme to the server.
I've tried opening individual ports for AFP, profile manager (1640, 2195), open ldap (389, 636) and even kerberos (88). Even with all of these open, it still doesn't work. I have to open up everything to get the error to go away - then the users can log in just fine.
Note, I'm logging in from the local network to a server on the local network, so this just seems bizarre.
I don't have the logs on this computer, but I recall that the error was occurring when it tried to mount the home directory, after authentication. It was an error 64 from homedirmounter (if memory serves).
Any thoughts on what port I'm missing that might be causing the error?

3659 is the SASL port used by the password server, so that makes a certain amount of sense.
However, I still maintain that if your network is configured in the way I'd expect, the base station shouldn't be relevant. The clients should be connecting on a LAN-to-LAN basis so the firewall/filter in the base station shoudn't be in play.
Given what you say, I suspect you've misconfigured your network - probably at the DNS level and you're not running private DNS for your LAN, which would force the clients to connect through the public address. The risks and downside of this approach are numerous - not least of which is the fact that you ARE exposing your server to the general public (including all the less-than-honourable people out there). On that basis there is a risk and i'd look to close that soonest.
You should have a private DNS server running on your LAN that knows the private network addresses of your servers and clients. In this way any client should be able to connect directly to the server's LAN address, bypassing the public interface on your base station. I suspect that if you perform a DNS lookup on your server's hostname you get back its public address, right?

"We had difficulty reading this feed. null" Atom feeds no longer work?

Hi - our Audioboo feeds used to work fine when submitting as a podcast (eg http://audioboo.fm/users/4705/boos.atom). It seems like they stopped working recently - maybe in the past couple of days - and just report "We had difficulty reading this feed. null" when you try to submit them.
I'm beginning to suspect that the use of atom rather than rss is the cause. Can anyone confirm?
-Jonathan

This feed can be subscribed to manually in iTunes (from the 'Advanced' menu) - actually I'm rather surprised it works because it isn't a valid podcast feed (though it is a valid Atom feed).
It has the iTunes 'declaration' and some itunes tags, although the former is contained in a 'feed' tag whereas it should be a 'rss' tag: there is no 'channel' tag enclosing the podcast data, no 'item' tags enclosing each episode, and no 'enclosure' tags within each episode containing the media URL. I'm not surprised you can't submit it as a podcast, and as I say it's a but surprising that the iTunes application recognizes it.
In order to get it accepted in the iTunes Store you need to create a feed in the correct format: this page contains a sample basic feed so you can see how it should look:
http://www.wilmut.org.uk/pc
If the feed contains the valid iTunes format it can also contain atom tags, which iTunes will ignore.

HT1338 I had the geek squad from bestbuy supposedly install iphoto 11 on my mac but it is not there and when i try to download it it say the app has been download by another user on this machine. What do i need to do get get this app on my system?

I had the geek squad from bestbuy supposedly install iphoto 11 on my mac but it is not there and when i try to download it it say the app has been download by another user on this machine. What do i need to do get get this app on my system? If they could not do it right the first time I do not have much faith in their advice.

Assuming you've done a system wide search for it including the Applications folder and it's not there......
I think you will need to address this with them - did you pay them for the application? Or was your purchase price to include it? And the question(s) to ask them:
If the app store states that it has been downloaded, ask them where it is and which Apple ID they used. (the store keeps track of Apple IDs and machine IDs on everything you download).
I have absolutely no faith in their advice; however, in this case, it's not so much technical advice, but an answer to your questions: you paid for something and it appears not to be there.

HT2443 loops are in the browser when you the loop message reads this file type is not supported

loops are in the browser when you the loop message reads this file type is not supported

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

SHUFFLE USERS ! READ THIS

Similar Messages

Maybe you are looking for