Shuffle won't play .m4p audio file

On my shuffle all but 2 songs are ripped from Cds
The only two songs in the .m4p format won’t play on my iPod
Restored and up dated the iPod a couple dozen times and tried to reformat the tracks but I’m at a loss and need some help.
If it help they're "Protected"

I just solved the issue.
Even though my computer was already authorized, I re-authorized it and now I can transfer purchased music to my Shuffle.
Can you currently play the purchased music in iTunes? I just tried to play one of my purchased songs and, sure enough, it wasn't authorized. I logged into my account and voila! However, it now says I have authorized 2 out of my 5 authorizations, even though this is my only computer...

Similar Messages

Iweb won't play my audio files when published

Can someone please help? I spent hours creating a website for music i produce. It works all fine and dandy on the preview pages, but when published the audio files and video files don't play. All that comes up is the picture and a small quick time player logo underneath. I have tried several different remedies but nothing seems to be working. Is this just difficulties with the new me.com facilities or what? Any help would be gratefully recieved.
Thanks very much,
a very frustrated mac user.

I gave up on your page because the file size is absurd.
Your source files are AIFF format (raw CD quality audio) that measures 10 MB's per minute. I don't have the time to wait for 6 of these files to load in your single page:
http://web.mac.com/thekoles/the_koles/Media/trouble%20and%20strife%20150808%202. aif is 47 MB's.
Compress your files in iTunes to reduce the file size.

My ipod touch (and iphone) won't play long audio files.

What happens, is it gets to 5 minutes or so, sometimes 10, then skips to the next track. And when I skip back to the track I was listening to it won't go past that point. Why would this be? Could it be the way I have my ipod set up or the audio track? (These are long audio tracks btw, 50mins-1hr long)
Thanks

What is the source of the files? Do they play OK in iTunes on the computer?
Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have a problem an appointment at the Genius Bar of an Apple store is in order

M4p audio file in imovie

I can't play m4p audio files in my imovie on ipad2. Any suggestions.

Mode
Runs from
scratch
Works on
current wave
Works on
highlighted
selection
Execute relative
to cursor available
1
■
□
□
□
2
□
■
□
■
3
■
■
□
■
4
□
□
■
□
5
■
□
■
□
6
□
■
■
■
7
■
■
■
■
8
□
□
□
□
9
repeats row 1
A black dot means it could potentially happen, and a clear dot means it definitely won't. I'm pretty sure that this is correct, but somebody might like to check it. I picked mode 8 because by default it works on the current wave, but doesn't allow execution relative to the cursor - a combination that's not explicitly available. And yes, some of these combinations are clearly silly.
And this is the only copy anywhere public of this information - despite the fact that it's not too difficult to work it out, and it's clearly quite useful, Adobe have never seen fit to reveal it.

Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

Does Quicktime Pro also edit .mov files on a PC?
Date: Wed, 27 Nov 2013 07:53:14 -0800
From: [email protected]
To: [email protected]
Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    created by Steve Grisetti in Premiere Elements - View the full discussion
Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Droid Razr Bug. Won't play streaming audio from websites.

My Droid Razr won't play streamed audio from a website and won't play .wav files attached to e-mails. That's annoying.
Motorola tech support said problem will be fixed upon next upgrade of Android OS.
My phone is currently running Android OS 2.3.5.
Does anyone now of a quicker fix?
Does anyone know when an OS upgrade will be available for the Droid Razr?
Thx!

i got the same issue on my ipod. i figured the whole idea of converting the format would solve the issue. never really found out how to solve it. i'll be watching this post to see if anyone has a solve for this issue.

I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??

I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??
I haven't kept records of the songs I have paid for, and a number of songs have recently been displaying this message, making me search my computer for them. Most I have been able to find, but this one immediately "disappeared" the moment I attempted to play it after downloading...... how do I either get it back or get my money back???

How did you do this move? Unless you know what you are doing you have to move the whole, complete iTunes folder.
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

I backed up my I-tunes library (by dragging my "music" folder to my new external hard drive. Now 6,000 songs won't play stating, "original file cannot be found." What can I do to get these songs back???!!!

I backed up my I-tunes library (by dragging my "music" folder to my new external hard drive. Now 6,000 songs won't play stating, "original file cannot be found." What can I do to get these songs back???!!!

Try putting the files back where they were before you moved them, then follow the steps in this Apple document -> iTunes: Back up your iTunes library by copying to an external hard drive

Playing an audio file from applet

Hi friends,
I have a problem to be solved .
Please help me.
I have to play an audio file from applet.When the applet loads it shold start playing .There is a progress bar in the applet it shold alsomove corresponding to that.
How can i do that.Give me an idea.
I know nothing about jmf.
I am using j2sdk1.4,windows 2000 server.

Andrew,
Forgive my naivety, but i struggle with JAVA! I am desperately trying to create a JAVA plugin to SERVOY and have to date been successful with a few things. Record, Playback, convert to .spx.
I am really struggling with implementing a rewind and fastforward function of the type you have. I thought it would be easy, but it appears not.
At the bottom is the complete code from my class that is called by the servoy plugin wrapper,
i had thought that adding some simple jump 500 ms would have been easy in something like this:
public AudioStream js_FastForward (AudioStream as) throws IOException {
!!! Line or two here to move the play head forward !!!
     AudioPlayer.player.start(as);
     return as;
Can you give me any pointers to how i code that fast forward bit.
many thanks
David
package com.d2e.MyPlugin;
import com.servoy.j2db.scripting.IScriptObject;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.awt.Button;
import javax.sound.sampled.*;
import org.xiph.speex.*;
import org.xiph.speex.spi.*;
import sun.audio.*;    //import the sun.audio package
public class MyPluginProvider implements IScriptObject {
      public void JSencode()
         throws IOException{
           /** Version of the Speex Encoder */
            final String VERSION = "Java Speex Command Line Encoder v0.9.7 ($Revision: 1.5 $)";
            /** Copyright display String */
            final String COPYRIGHT = "Copyright (C) 2002-2004 Wimba S.A.";
            /** Print level for messages : Print debug information */
            final int DEBUG = 0;
            /** Print level for messages : Print basic information */
            final int INFO = 1;
            /** Print level for messages : Print only warnings and errors */
            final int WARN = 2;
            /** Print level for messages : Print only errors */
            final int ERROR = 3;
            int printlevel = INFO;
            /** File format for input or output audio file: Raw */
            final int FILE_FORMAT_RAW = 0;
            /** File format for input or output audio file: Ogg */
            final int FILE_FORMAT_OGG = 1;
            /** File format for input or output audio file: Wave */
            final int FILE_FORMAT_WAVE = 2;
            int srcFormat = FILE_FORMAT_OGG;
            int destFormat = FILE_FORMAT_WAVE;
            int mode       = -1;
            int quality    = 4;
            /** Defines the encoders algorithmic complexity. */
             int complexity = 3;
            /** Defines the number of frames per speex packet. */
             int nframes    = 1;
            /** Defines the desired bitrate for the encoded audio. */
             int bitrate    = -1;
            /** Defines the sampling rate of the audio input. */
             int sampleRate = -1;
            /** Defines the number of channels of the audio input (1=mono, 2=stereo). */
             int channels   = 1;
            /** Defines the encoder VBR quality setting (float from 0 to 10). */
             float vbr_quality = -1;
            /** Defines whether or not to use VBR (Variable Bit Rate). */
             boolean vbr    = false;
            /** Defines whether or not to use VAD (Voice Activity Detection). */
             boolean vad    = false;
            /** Defines whether or not to use DTX (Discontinuous Transmission). */
             boolean dtx    = false;
          //HArd code src format and dest
           // private String srcPath ="junk.wav";
          srcFormat = FILE_FORMAT_WAVE;
          destFormat = FILE_FORMAT_OGG;
          //destPath="junk.spx";
         byte[] temp    = new byte[2560]; // stereo UWB requires one to read 2560b
         final int HEADERSIZE = 8;
         final String RIFF      = "RIFF";
         final String WAVE      = "WAVE";
         final String FORMAT    = "fmt ";
         final String DATA      = "data";
         final int WAVE_FORMAT_PCM = 0x0001;
         // Open the input stream
         DataInputStream dis = new DataInputStream(new FileInputStream("junk.wav"));
         // Prepare input stream
       //DP - Sort out the Wave File
           // read the WAVE header
           dis.readFully(temp, 0, HEADERSIZE+4);
           // Read other header chunks
           dis.readFully(temp, 0, HEADERSIZE);
           String chunk = new String(temp, 0, 4);
           int size = readInt(temp, 4);
           while (!chunk.equals(DATA)) {
             dis.readFully(temp, 0, size);
             if (chunk.equals(FORMAT)) {
               typedef struct waveformat_extended_tag {
               WORD wFormatTag; // format type
               WORD nChannels; // number of channels (i.e. mono, stereo...)
               DWORD nSamplesPerSec; // sample rate
               DWORD nAvgBytesPerSec; // for buffer estimation
               WORD nBlockAlign; // block size of data
               WORD wBitsPerSample; // Number of bits per sample of mono data
               WORD cbSize; // The count in bytes of the extra size
               } WAVEFORMATEX;
               if (readShort(temp, 0) != WAVE_FORMAT_PCM) {
                 System.err.println("Not a PCM file");
                 return;
               channels = readShort(temp, 2);
               sampleRate = readInt(temp, 4);
               if (readShort(temp, 14) != 16) {
                 System.err.println("Not a 16 bit file " + readShort(temp, 18));
                 return;
               // Display audio info
               if (printlevel <= DEBUG) {
                 System.out.println("File Format: PCM wave");
                 System.out.println("Sample Rate: " + sampleRate);
                 System.out.println("Channels: " + channels);
             dis.readFully(temp, 0, HEADERSIZE);
             chunk = new String(temp, 0, 4);
             size = readInt(temp, 4);
           if (printlevel <= DEBUG) System.out.println("Data size: " + size);
       //DP ENd sort wave file
       //Now Choose the mode , we have a file sampled at 44100
             mode = 2; // Ultra-wideband
         // Construct a new encoder
         SpeexEncoder speexEncoder = new SpeexEncoder();
         speexEncoder.init(mode, quality, sampleRate, channels);
         if (complexity > 0) {
           speexEncoder.getEncoder().setComplexity(complexity);
         if (bitrate > 0) {
           speexEncoder.getEncoder().setBitRate(bitrate);
         if (vbr) {
           speexEncoder.getEncoder().setVbr(vbr);
           if (vbr_quality > 0) {
             speexEncoder.getEncoder().setVbrQuality(vbr_quality);
         if (vad) {
           speexEncoder.getEncoder().setVad(vad);
         if (dtx) {
           speexEncoder.getEncoder().setDtx(dtx);
         // Display info
         // Open the file writer
         AudioFileWriter writer;
         if (destFormat == FILE_FORMAT_OGG) {
           writer = new OggSpeexWriter(mode, sampleRate, channels, nframes, vbr);
         else if (destFormat == FILE_FORMAT_WAVE) {
           nframes = PcmWaveWriter.WAVE_FRAME_SIZES[mode-1][channels-1][quality];
           writer = new PcmWaveWriter(mode, quality, sampleRate, channels, nframes, vbr);
         else {
           writer = new RawWriter();
         writer.open("junk.spx");
         writer.writeHeader("Encoded with: " + VERSION);
         int pcmPacketSize = 2 * channels * speexEncoder.getFrameSize();
         try {
           // read until we get to EOF
           while (true) {
             dis.readFully(temp, 0, nframes*pcmPacketSize);
             for (int i=0; i<nframes; i++)
               speexEncoder.processData(temp, i*pcmPacketSize, pcmPacketSize);
             int encsize = speexEncoder.getProcessedData(temp, 0);
             if (encsize > 0) {
               writer.writePacket(temp, 0, encsize);
         catch (EOFException e) {}
         writer.close();
         dis.close();
        * Converts Little Endian (Windows) bytes to an int (Java uses Big Endian).
        * @param data the data to read.
        * @param offset the offset from which to start reading.
        * @return the integer value of the reassembled bytes.
       protected static int readInt(final byte[] data, final int offset)
         return (data[offset] & 0xff) |
                ((data[offset+1] & 0xff) << 8) |
                ((data[offset+2] & 0xff) << 16) |
                (data[offset+3] << 24); // no 0xff on the last one to keep the sign
        * Converts Little Endian (Windows) bytes to an short (Java uses Big Endian).
        * @param data the data to read.
        * @param offset the offset from which to start reading.
        * @return the integer value of the reassembled bytes.
       protected static int readShort(final byte[] data, final int offset)
         return (data[offset] & 0xff) |
                (data[offset+1] << 8); // no 0xff on the last one to keep the sign
     AudioFormat audioFormat;
       TargetDataLine targetDataLine;
     public Class[] getAllReturnedTypes() {
          // TODO Auto-generated method stub
          return null;
     public String[] getParameterNames(String arg0) {
          // TODO Auto-generated method stub
          return null;
     public String getSample(String arg0) {
          // TODO Auto-generated method stub
          return null;
     public String getToolTip(String arg0) {
          // TODO Auto-generated method stub
          return null;
     public boolean isDeprecated(String arg0) {
          // TODO Auto-generated method stub
          return false;
     public String js_Record (String name){
          captureAudio();
          return "Started Recording " +name;
    public String js_StopRecord (String name) throws IOException{
         //new ActionListener(){
         //   public void actionPerformed(ActionEvent e)
              //Terminate the capturing of input data
              // from the microphone.
              targetDataLine.stop();
              targetDataLine.close();
          // }//end actionPerformed
         //};//end ActionListener
             // JSpeexEnc ("junk.wav","output.spx");
              JSencode();
          return "Stop Records " +name;
    //Play audio file
    public AudioStream js_Playback (String name) throws IOException{
         InputStream in = new FileInputStream("junk.wav");
         AudioStream as = new AudioStream(in);
         AudioPlayer.player.start(as);
         return as;
    public AudioStream js_ContPlay (AudioStream as) throws IOException {
         AudioPlayer.player.start(as);
         return as;
     //Stop Play
    public AudioStream js_Stop_Playback (AudioStream as) throws IOException{
         AudioPlayer.player.stop(as);
          return as;
     //This method captures audio input from a
    // microphone and saves it in an audio file.
    private void captureAudio(){
      try{
        //Get things set up for capture
        audioFormat = getAudioFormat();
        DataLine.Info dataLineInfo =
                            new DataLine.Info(
                              TargetDataLine.class,
                              audioFormat);
        targetDataLine = (TargetDataLine)
                 AudioSystem.getLine(dataLineInfo);
        //Create a thread to capture the microphone
        // data into an audio file and start the
        // thread running. It will run until the
        // Stop button is clicked. This method
        // will return after starting the thread.
        new CaptureThread().start();
      }catch (Exception e) {
        e.printStackTrace();
        System.exit(0);
      }//end catch
    }//end captureAudio method
// This method creates and returns an
    // AudioFormat object for a given set of format
    // parameters. If these parameters don't work
    // well for you, try some of the other
    // allowable parameter values, which are shown
    // in comments following the declarations.
    private AudioFormat getAudioFormat(){
      float sampleRate = 44100.0F;
      //8000,11025,16000,22050,44100
      int sampleSizeInBits = 16;
      //8,16
      int channels = 1;
      //1,2
      boolean signed = true;
      //true,false
      boolean bigEndian = true;
      //true,false
      return new AudioFormat(sampleRate,
                             sampleSizeInBits,
                             channels,
                             signed,
                             bigEndian);
    }//end getAudioFormat
    class CaptureThread extends Thread{
           public void run(){
             AudioFileFormat.Type fileType = null;
             File audioFile = null;
             //Set the file type and the file extension
             // based on the selected radio button.
             //if(aifcBtn.isSelected()){
              // fileType = AudioFileFormat.Type.AIFC;
              // audioFile = new File("junk.aifc");
            // }else if(aiffBtn.isSelected()){
             // fileType = AudioFileFormat.Type.AIFF;
             // audioFile = new File("junk.aif");
            // }else if(auBtn.isSelected()){
             // fileType = AudioFileFormat.Type.AU;
             // audioFile = new File("junk.au");
            // }else if(sndBtn.isSelected()){
            //   fileType = AudioFileFormat.Type.SND;
             // audioFile = new File("junk.snd");
            // }else if(waveBtn.isSelected()){
             fileType = AudioFileFormat.Type.WAVE;
             audioFile = new File("junk.wav");
            // }//end if
             try{
               targetDataLine.open(audioFormat);
               targetDataLine.start();
               AudioSystem.write(
                     new AudioInputStream(targetDataLine),
                     fileType,
                     audioFile);
             }catch (Exception e){
               e.printStackTrace();
             }//end catch
           }//end run
         }//end inner class CaptureThread
}

Playing the audio file from the point of mark

Hi All, i want to play a audio file from the point of mark.
i have used mark() method to mark but when i play the audio it is still playing the audio from the starting point. please help me.

Hi,
Question:
1. You have a folder for each DVD whose video contents you edited.
Answer: Yes
Question:
You talk about projects 34, 35, 36, 37. Are these projects associated with only one specific DVD?
What is supposed to be in each project - just edited VTS_01_1.VOB or edits from the others in the series
such as VTS_01_2.VOB, VTS_01_3.VOB, etc.
Answer:
Project 34 has edited Premiere Elements file 34 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#34
Project 35 has edited Premiere Elements file 35 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#35
Project 36 has edited Premiere Elements file 36 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#36
etc.
Question:
2. If you screen each DVD video file VOB for a given DVD disc, does the content follow sequentially and cleanly?
Answer:
Yes
When I run the VST_01_1.VOB, VTS_01_2.VOB, etc from each project the audio and the video are clean and match.
When I run the edited Premiere Elements file that were created after project 34 edited Premiere Elements file project 35, 36, 37 etc. I am getting the audio from project 34
When I run the edited Premiere Elements file that were created before project 34 edited Premiere Elements file project 1, 2, all the way to 33. I am getting the correct audio
Thanks,
Ron

Playing an audio file in a certain location

Hi Everyone...
I would like to play an audio file (edc.caf) that is located in this directory....
/DCIM/TONY/IOW/AUDIO
When i run it through the NSURL processor....
[code]
NSURL *soundFileURL = [NSURL fileURLWithPath:soundFilePath];
[code]
the resulting value of soundFileURL is
file://localhost/DCIM/TONY/IOW/AUDIO/edc.caf
But i do not hear any audio out of the iPod touch.
I've tried two different methods of playing the audio,
and both are failing.
I know the audio is being recorded, as i can bring it back to the PC and play them fine.
My initial thoughts are that i cannot find location of the file, but i am not sure.
Can anyone confirm the location is correct???
thanks
tony

Small edit....
the resulting value is a little different than what i posted....
the actual string is...
file://localhost/var/mobile/Media/DCIM/TONY/AUDIO/edc.caf
Sorry about the confusion

Help me play an audio file in my GUI

Hi
I've been having some trouble getting code to play an audio file in my GUI
Basically all I want to do is play a file in the same directory as the program, and have it loop. No controls, no buttons to change the play state.
Could someone point me to or help me implement this with some example code? I'm really stuck and I'm just not sure how to implement it into the existing GUI class.
Thanks for any help

Hi
I've done so, and the method gets called without any problems, but doesnt play anything.
Have a look -
public void audioFile()
    try {
        // From file
        AudioInputStream stream = AudioSystem.getAudioInputStream(new File("test.wav"));
        // From URL
        //stream = AudioSystem.getAudioInputStream(new URL("http://hostname/audiofile"));
        // At present, ALAW and ULAW encodings must be converted
        // to PCM_SIGNED before it can be played
        AudioFormat format = stream.getFormat();
        if (format.getEncoding() != AudioFormat.Encoding.PCM_SIGNED) {
            format = new AudioFormat(
                    AudioFormat.Encoding.PCM_SIGNED,
                    format.getSampleRate(),
                    format.getSampleSizeInBits()*2,
                    format.getChannels(),
                    format.getFrameSize()*2,
                    format.getFrameRate(),
                    true);        // big endian
            stream = AudioSystem.getAudioInputStream(format, stream);
        // Create the clip
        DataLine.Info info = new DataLine.Info(
            Clip.class, stream.getFormat(), ((int)stream.getFrameLength()*format.getFrameSize()));
        Clip clip = (Clip) AudioSystem.getLine(info);
        // This method does not return until the audio file is completely loaded
        clip.open(stream);
        // Start playing
        clip.start();
    } catch (MalformedURLException e) {
    } catch (IOException e) {
    } catch (LineUnavailableException e) {
    } catch (UnsupportedAudioFileException e) {
}

Movie purchased in iTunes won't play. Audio is fine; video doesn't appear.

Movie purchased in iTunes won't play. Audio is fine; video doesn't appear.

Wormbog wrote:
I went back to iTunes but there's no option for me to re-download it.
Yes there is.
Go to the iTunes Store on your computer. Click the "Purchased" link about halfway down on the far right side. Click the "All" tab on top. The song is there. Re-download it.

Is it possible to play an audio file out of labview (using myDAQ)?

Hi all,
I am using a myDAQ (first time). I am trying to play an audio file at a certain time in my VI.
All the examples I have seen use the audio in and then play out of the audio out port. Is it not possible to simply find the file location and then play it out of the audio out under the given conditions in the VI or even import the sound? I am not trying to play large files or large quantities such as songs. I only want a congratulatory sound when the task is complete (2/3s).
Any help would be is appreciated (even to say it isn't possible!)
Cheers
Solved!
Go to Solution.

Why no just play a WAV file? Use Play Sound File.vi as shown here.
Richard

Is it possible to play two audio files simultaneously.

Hi,
Is it possible to play two audio files simultaneously.
I modified the 'SpeakHere' to play two audio files simultaneously, it worked perfectly on simulator but get hanged on iphone.
To this I implemented NSTimer, which regularly checks for both player instance every second.As soon as any player gets stopped Timer task stops the second one forcefully and again starts both.
thanks.

Hi Jay
Do you have the eLearning Suite? If so, you have Adobe Presenter available to you. If you don't, you should be able to download the Presenter installation file and evaluate it.
Presenter is an add in for PowerPoint. The neat thing about it is that it provides for a Table of Contents type of functionality as you see is configured in Captivate. But the twist with that is you are able to do something you cannot do in Captivate. You are able to insert videos inside the TOC area!
Just musing out loud... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Shuffle won't play .m4p audio file

Similar Messages

Maybe you are looking for