Shut down and booting-up takes longer than usual on iMac 27".
Hi there,
I have a problem with my 27" iMac (model listed somewhere), it appears to take an extraordinarily long time to boot up and shut down compared to a few weeks (or even days) ago.
At the moment, at shut-down, it hangs on the blue screen with a spinning wheel for quite a long time, which never used to happen.
At boot-up, it takes quite a bit more time to boot-up.
For comparison, it took about 10-20 seconds to boot-up previously, but now it is taking about 50-60 seconds.
All of this has happened randomly, and I have no idea what the cause is.
I bought my iMac on Black Friday 2010 from the online store.
Thanks,
Jack
Non-shutting down might indicate that the Mac is waiting for something to finish before it can complete the process, and whatever that is isn't doing so. Launch Console in Utilities and check the system logs to see what the last thing running was and perhaps that might give you a clue.
Similar Messages
-
Why did Mountain Lion slow down my shut down and boot up time for my MacBook Pro?
I had Snow Leopard, and not Lion. My shut down time rose from about 5 seconds to 10-15 seconds. My start up time also increased noticeabley. Any reason why because I thought Mountain Lion was supposed to be faster.
I have very few apps other than what came on my MBP. I've checked most other, really dont think this is the problem. My MBP is not junked/cluttered up. Not many programs, just pictures, videos, and some docs. Everything seems to work smoothly once on, but the start up and shut down times are still double what they were when I bought with snow leopard (Not Windows like, but scary close). I cannot find any solution that will work. My opinion, should not have to do a clean install for it to work. Some folks have not experienced these issues, so I think its some setting or something else that is my problem. I have 4GB RAM, and considering increasing to 8, but from what I have read else where thsi will not increase boot or shutdown, way even increase. Right now, not sure if the new ML features out way the slow boot and shut down.
-
[Solved] Booting takes longer than usual
Hi guys,
ran into a little problem here.
Hardware: Macbook 5,5 Arch on sdb which is a SDD, data stored on an HDD.
So since yesterday, the booting process takes very long for a SSD system. I don't really get any messages while booting, so i'm a little bit confused.
No USB devices connected, wired internet connection.
Here is the output from dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 (GCC) ) #1 SMP PREEMPT Sat Apr 6 07:27:01 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=95744744-5122-437b-82a7-6eb85b3a6448 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000acfecfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000acfed000-0x00000000acfedfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000acfee000-0x00000000ae700fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae701000-0x00000000ae705fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae706000-0x00000000ae710fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae711000-0x00000000ae711fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae712000-0x00000000ae720fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae721000-0x00000000ae721fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae722000-0x00000000ae72afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae72b000-0x00000000ae92bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae92c000-0x00000000aefbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aefbc000-0x00000000aefbcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aefbd000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af000000-0x00000000beffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bf015fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf016000-0x00000000bf016fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf017000-0x00000000bf0a9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0aa000-0x00000000bf0acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0ad000-0x00000000bf0aefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0af000-0x00000000bf0b0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0b1000-0x00000000bf0b2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0b3000-0x00000000bf0b7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0b8000-0x00000000bf0b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0ba000-0x00000000bf0bafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0bb000-0x00000000bf0c2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0c3000-0x00000000bf0c4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf0c5000-0x00000000bf0c6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0c7000-0x00000000bf0c8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf0c9000-0x00000000bf10dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf10e000-0x00000000bf111fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf112000-0x00000000bf119fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf11a000-0x00000000bf11cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf11d000-0x00000000bf11efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf11f000-0x00000000bf11ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf120000-0x00000000bf224fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf225000-0x00000000bf225fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf226000-0x00000000bf226fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf227000-0x00000000bf23cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf23d000-0x00000000bf241fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf242000-0x00000000bf242fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf243000-0x00000000bf264fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf265000-0x00000000bf267fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf268000-0x00000000bf26ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf270000-0x00000000bf274fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf275000-0x00000000bf276fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf277000-0x00000000bf277fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf278000-0x00000000bf278fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf279000-0x00000000bf27bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf27ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf280000-0x00000000bf280fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf281000-0x00000000bf709fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf70a000-0x00000000bf70afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf70b000-0x00000000bf714fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf715000-0x00000000bf716fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf717000-0x00000000bf718fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf719000-0x00000000bf719fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf71a000-0x00000000bfe92fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe93000-0x00000000bfe93fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfe94000-0x00000000bfe9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe9e000-0x00000000bfe9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfe9f000-0x00000000bfec4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfec5000-0x00000000bfec6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfec7000-0x00000000bfec7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfec8000-0x00000000bfec9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfeca000-0x00000000bfeccfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfecd000-0x00000000bfedefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfedf000-0x00000000bfeeefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfeef000-0x00000000bfef8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfef9000-0x00000000bfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3400000-0x00000000d3400fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0xbfeee000 ACPI 2.0=0xbfeee014 SMBIOS=0xbfec6000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem03: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001001000) (15MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000001001000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f01000) (15MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000002f01000-0x0000000037a3a000) (843MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000037a3a000-0x0000000037d15000) (2MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000037d15000-0x0000000081bf3000) (1182MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000081bf3000-0x00000000acfb1000) (691MB)
[ 0.000000] efi: mem10: type=1, attr=0xf, range=[0x00000000acfb1000-0x00000000acfcf000) (0MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x00000000acfcf000-0x00000000acfd0000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x00000000acfd0000-0x00000000acfed000) (0MB)
[ 0.000000] efi: mem13: type=6, attr=0x800000000000000f, range=[0x00000000acfed000-0x00000000acfee000) (0MB)
[ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000acfee000-0x00000000ae6c7000) (22MB)
[ 0.000000] efi: mem15: type=3, attr=0xf, range=[0x00000000ae6c7000-0x00000000ae6f0000) (0MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000ae6f0000-0x00000000ae6f6000) (0MB)
[ 0.000000] efi: mem17: type=3, attr=0xf, range=[0x00000000ae6f6000-0x00000000ae6f7000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ae6f7000-0x00000000ae6f9000) (0MB)
[ 0.000000] efi: mem19: type=3, attr=0xf, range=[0x00000000ae6f9000-0x00000000ae700000) (0MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ae700000-0x00000000ae701000) (0MB)
[ 0.000000] efi: mem21: type=5, attr=0x800000000000000f, range=[0x00000000ae701000-0x00000000ae706000) (0MB)
[ 0.000000] efi: mem22: type=3, attr=0xf, range=[0x00000000ae706000-0x00000000ae709000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000ae709000-0x00000000ae711000) (0MB)
[ 0.000000] efi: mem24: type=6, attr=0x800000000000000f, range=[0x00000000ae711000-0x00000000ae712000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000ae712000-0x00000000ae71b000) (0MB)
[ 0.000000] efi: mem26: type=3, attr=0xf, range=[0x00000000ae71b000-0x00000000ae721000) (0MB)
[ 0.000000] efi: mem27: type=5, attr=0x800000000000000f, range=[0x00000000ae721000-0x00000000ae722000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ae722000-0x00000000ae729000) (0MB)
[ 0.000000] efi: mem29: type=3, attr=0xf, range=[0x00000000ae729000-0x00000000ae72a000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000ae72a000-0x00000000ae72b000) (0MB)
[ 0.000000] efi: mem31: type=10, attr=0xf, range=[0x00000000ae72b000-0x00000000ae92c000) (2MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000ae92c000-0x00000000aef9d000) (6MB)
[ 0.000000] efi: mem33: type=3, attr=0xf, range=[0x00000000aef9d000-0x00000000aefad000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000aefad000-0x00000000aefb4000) (0MB)
[ 0.000000] efi: mem35: type=3, attr=0xf, range=[0x00000000aefb4000-0x00000000aefb6000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000aefb6000-0x00000000aefb8000) (0MB)
[ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000aefb8000-0x00000000aefba000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000aefba000-0x00000000aefbc000) (0MB)
[ 0.000000] efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000aefbc000-0x00000000aefbd000) (0MB)
[ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x00000000aefbd000-0x00000000aefbe000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000aefbe000-0x00000000aefc0000) (0MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000aefc0000-0x00000000aefcb000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000aefcb000-0x00000000aefcc000) (0MB)
[ 0.000000] efi: mem44: type=3, attr=0xf, range=[0x00000000aefcc000-0x00000000aefd1000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x00000000aefd1000-0x00000000aefd3000) (0MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x00000000aefd3000-0x00000000aefd4000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000aefd4000-0x00000000aefd6000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000aefd6000-0x00000000aefd8000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x00000000aefd8000-0x00000000aefd9000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000aefd9000-0x00000000aefda000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x00000000aefda000-0x00000000aefdd000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000aefdd000-0x00000000aefdf000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x00000000aefdf000-0x00000000aefe1000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000aefe1000-0x00000000aefea000) (0MB)
[ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x00000000aefea000-0x00000000aefec000) (0MB)
[ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000aefec000-0x00000000aefed000) (0MB)
[ 0.000000] efi: mem57: type=4, attr=0xf, range=[0x00000000aefed000-0x00000000aefee000) (0MB)
[ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000aefee000-0x00000000aeff1000) (0MB)
[ 0.000000] efi: mem59: type=4, attr=0xf, range=[0x00000000aeff1000-0x00000000aeff3000) (0MB)
[ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000aeff3000-0x00000000aeff7000) (0MB)
[ 0.000000] efi: mem61: type=4, attr=0xf, range=[0x00000000aeff7000-0x00000000aeffb000) (0MB)
[ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000aeffb000-0x00000000aeffc000) (0MB)
[ 0.000000] efi: mem63: type=4, attr=0xf, range=[0x00000000aeffc000-0x00000000aeffd000) (0MB)
[ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000aeffd000-0x00000000af000000) (0MB)
[ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x00000000bf000000-0x00000000bf004000) (0MB)
[ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x00000000bf004000-0x00000000bf006000) (0MB)
[ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x00000000bf006000-0x00000000bf00b000) (0MB)
[ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x00000000bf00b000-0x00000000bf013000) (0MB)
[ 0.000000] efi: mem69: type=3, attr=0xf, range=[0x00000000bf013000-0x00000000bf015000) (0MB)
[ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x00000000bf015000-0x00000000bf016000) (0MB)
[ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000bf016000-0x00000000bf017000) (0MB)
[ 0.000000] efi: mem72: type=3, attr=0xf, range=[0x00000000bf017000-0x00000000bf026000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x00000000bf026000-0x00000000bf027000) (0MB)
[ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x00000000bf027000-0x00000000bf029000) (0MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000bf029000-0x00000000bf02b000) (0MB)
[ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x00000000bf02b000-0x00000000bf030000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000bf030000-0x00000000bf031000) (0MB)
[ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x00000000bf031000-0x00000000bf037000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x00000000bf037000-0x00000000bf03a000) (0MB)
[ 0.000000] efi: mem80: type=3, attr=0xf, range=[0x00000000bf03a000-0x00000000bf03e000) (0MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x00000000bf03e000-0x00000000bf03f000) (0MB)
[ 0.000000] efi: mem82: type=3, attr=0xf, range=[0x00000000bf03f000-0x00000000bf044000) (0MB)
[ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x00000000bf044000-0x00000000bf046000) (0MB)
[ 0.000000] efi: mem84: type=3, attr=0xf, range=[0x00000000bf046000-0x00000000bf048000) (0MB)
[ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x00000000bf048000-0x00000000bf04a000) (0MB)
[ 0.000000] efi: mem86: type=3, attr=0xf, range=[0x00000000bf04a000-0x00000000bf04b000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000bf04b000-0x00000000bf04c000) (0MB)
[ 0.000000] efi: mem88: type=3, attr=0xf, range=[0x00000000bf04c000-0x00000000bf06b000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000bf06b000-0x00000000bf06d000) (0MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000bf06d000-0x00000000bf073000) (0MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000bf073000-0x00000000bf074000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000bf074000-0x00000000bf078000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000bf078000-0x00000000bf07a000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000bf07a000-0x00000000bf081000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000bf081000-0x00000000bf083000) (0MB)
[ 0.000000] efi: mem96: type=3, attr=0xf, range=[0x00000000bf083000-0x00000000bf084000) (0MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000bf084000-0x00000000bf086000) (0MB)
[ 0.000000] efi: mem98: type=3, attr=0xf, range=[0x00000000bf086000-0x00000000bf089000) (0MB)
[ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x00000000bf089000-0x00000000bf08a000) (0MB)
[ 0.000000] efi: mem100: type=3, attr=0xf, range=[0x00000000bf08a000-0x00000000bf0a5000) (0MB)
[ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x00000000bf0a5000-0x00000000bf0a8000) (0MB)
[ 0.000000] efi: mem102: type=3, attr=0xf, range=[0x00000000bf0a8000-0x00000000bf0a9000) (0MB)
[ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x00000000bf0a9000-0x00000000bf0aa000) (0MB)
[ 0.000000] efi: mem104: type=6, attr=0x800000000000000f, range=[0x00000000bf0aa000-0x00000000bf0ab000) (0MB)
[ 0.000000] efi: mem105: type=5, attr=0x800000000000000f, range=[0x00000000bf0ab000-0x00000000bf0ad000) (0MB)
[ 0.000000] efi: mem106: type=4, attr=0xf, range=[0x00000000bf0ad000-0x00000000bf0af000) (0MB)
[ 0.000000] efi: mem107: type=5, attr=0x800000000000000f, range=[0x00000000bf0af000-0x00000000bf0b1000) (0MB)
[ 0.000000] efi: mem108: type=4, attr=0xf, range=[0x00000000bf0b1000-0x00000000bf0b3000) (0MB)
[ 0.000000] efi: mem109: type=5, attr=0x800000000000000f, range=[0x00000000bf0b3000-0x00000000bf0b8000) (0MB)
[ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x00000000bf0b8000-0x00000000bf0b9000) (0MB)
[ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x00000000bf0b9000-0x00000000bf0ba000) (0MB)
[ 0.000000] efi: mem112: type=5, attr=0x800000000000000f, range=[0x00000000bf0ba000-0x00000000bf0bb000) (0MB)
[ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x00000000bf0bb000-0x00000000bf0c0000) (0MB)
[ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x00000000bf0c0000-0x00000000bf0c2000) (0MB)
[ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x00000000bf0c2000-0x00000000bf0c3000) (0MB)
[ 0.000000] efi: mem116: type=10, attr=0xf, range=[0x00000000bf0c3000-0x00000000bf0c5000) (0MB)
[ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x00000000bf0c5000-0x00000000bf0c7000) (0MB)
[ 0.000000] efi: mem118: type=10, attr=0xf, range=[0x00000000bf0c7000-0x00000000bf0c9000) (0MB)
[ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x00000000bf0c9000-0x00000000bf10e000) (0MB)
[ 0.000000] efi: mem120: type=5, attr=0x800000000000000f, range=[0x00000000bf10e000-0x00000000bf112000) (0MB)
[ 0.000000] efi: mem121: type=4, attr=0xf, range=[0x00000000bf112000-0x00000000bf118000) (0MB)
[ 0.000000] efi: mem122: type=3, attr=0xf, range=[0x00000000bf118000-0x00000000bf11a000) (0MB)
[ 0.000000] efi: mem123: type=5, attr=0x800000000000000f, range=[0x00000000bf11a000-0x00000000bf11d000) (0MB)
[ 0.000000] efi: mem124: type=4, attr=0xf, range=[0x00000000bf11d000-0x00000000bf11f000) (0MB)
[ 0.000000] efi: mem125: type=6, attr=0x800000000000000f, range=[0x00000000bf11f000-0x00000000bf120000) (0MB)
[ 0.000000] efi: mem126: type=4, attr=0xf, range=[0x00000000bf120000-0x00000000bf122000) (0MB)
[ 0.000000] efi: mem127: type=3, attr=0xf, range=[0x00000000bf122000-0x00000000bf125000) (0MB)
[ 0.000000] efi: mem128: type=4, attr=0xf, range=[0x00000000bf125000-0x00000000bf137000) (0MB)
[ 0.000000] efi: mem129: type=3, attr=0xf, range=[0x00000000bf137000-0x00000000bf140000) (0MB)
[ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x00000000bf140000-0x00000000bf201000) (0MB)
[ 0.000000] efi: mem131: type=3, attr=0xf, range=[0x00000000bf201000-0x00000000bf20e000) (0MB)
[ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x00000000bf20e000-0x00000000bf20f000) (0MB)
[ 0.000000] efi: mem133: type=3, attr=0xf, range=[0x00000000bf20f000-0x00000000bf213000) (0MB)
[ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x00000000bf213000-0x00000000bf221000) (0MB)
[ 0.000000] efi: mem135: type=3, attr=0xf, range=[0x00000000bf221000-0x00000000bf223000) (0MB)
[ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x00000000bf223000-0x00000000bf224000) (0MB)
[ 0.000000] efi: mem137: type=3, attr=0xf, range=[0x00000000bf224000-0x00000000bf225000) (0MB)
[ 0.000000] efi: mem138: type=5, attr=0x800000000000000f, range=[0x00000000bf225000-0x00000000bf226000) (0MB)
[ 0.000000] efi: mem139: type=3, attr=0xf, range=[0x00000000bf226000-0x00000000bf227000) (0MB)
[ 0.000000] efi: mem140: type=6, attr=0x800000000000000f, range=[0x00000000bf227000-0x00000000bf239000) (0MB)
[ 0.000000] efi: mem141: type=5, attr=0x800000000000000f, range=[0x00000000bf239000-0x00000000bf23d000) (0MB)
[ 0.000000] efi: mem142: type=4, attr=0xf, range=[0x00000000bf23d000-0x00000000bf23e000) (0MB)
[ 0.000000] efi: mem143: type=3, attr=0xf, range=[0x00000000bf23e000-0x00000000bf23f000) (0MB)
[ 0.000000] efi: mem144: type=4, attr=0xf, range=[0x00000000bf23f000-0x00000000bf242000) (0MB)
[ 0.000000] efi: mem145: type=6, attr=0x800000000000000f, range=[0x00000000bf242000-0x00000000bf243000) (0MB)
[ 0.000000] efi: mem146: type=4, attr=0xf, range=[0x00000000bf243000-0x00000000bf244000) (0MB)
[ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x00000000bf244000-0x00000000bf247000) (0MB)
[ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x00000000bf247000-0x00000000bf24d000) (0MB)
[ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x00000000bf24d000-0x00000000bf250000) (0MB)
[ 0.000000] efi: mem150: type=4, attr=0xf, range=[0x00000000bf250000-0x00000000bf253000) (0MB)
[ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x00000000bf253000-0x00000000bf265000) (0MB)
[ 0.000000] efi: mem152: type=5, attr=0x800000000000000f, range=[0x00000000bf265000-0x00000000bf268000) (0MB)
[ 0.000000] efi: mem153: type=3, attr=0xf, range=[0x00000000bf268000-0x00000000bf26c000) (0MB)
[ 0.000000] efi: mem154: type=4, attr=0xf, range=[0x00000000bf26c000-0x00000000bf26d000) (0MB)
[ 0.000000] efi: mem155: type=3, attr=0xf, range=[0x00000000bf26d000-0x00000000bf26e000) (0MB)
[ 0.000000] efi: mem156: type=4, attr=0xf, range=[0x00000000bf26e000-0x00000000bf270000) (0MB)
[ 0.000000] efi: mem157: type=6, attr=0x800000000000000f, range=[0x00000000bf270000-0x00000000bf272000) (0MB)
[ 0.000000] efi: mem158: type=5, attr=0x800000000000000f, range=[0x00000000bf272000-0x00000000bf274000) (0MB)
[ 0.000000] efi: mem159: type=6, attr=0x800000000000000f, range=[0x00000000bf274000-0x00000000bf275000) (0MB)
[ 0.000000] efi: mem160: type=4, attr=0xf, range=[0x00000000bf275000-0x00000000bf276000) (0MB)
[ 0.000000] efi: mem161: type=3, attr=0xf, range=[0x00000000bf276000-0x00000000bf277000) (0MB)
[ 0.000000] efi: mem162: type=5, attr=0x800000000000000f, range=[0x00000000bf277000-0x00000000bf278000) (0MB)
[ 0.000000] efi: mem163: type=4, attr=0xf, range=[0x00000000bf278000-0x00000000bf279000) (0MB)
[ 0.000000] efi: mem164: type=5, attr=0x800000000000000f, range=[0x00000000bf279000-0x00000000bf27c000) (0MB)
[ 0.000000] efi: mem165: type=4, attr=0xf, range=[0x00000000bf27c000-0x00000000bf27d000) (0MB)
[ 0.000000] efi: mem166: type=3, attr=0xf, range=[0x00000000bf27d000-0x00000000bf27e000) (0MB)
[ 0.000000] efi: mem167: type=4, attr=0xf, range=[0x00000000bf27e000-0x00000000bf280000) (0MB)
[ 0.000000] efi: mem168: type=6, attr=0x800000000000000f, range=[0x00000000bf280000-0x00000000bf281000) (0MB)
[ 0.000000] efi: mem169: type=3, attr=0xf, range=[0x00000000bf281000-0x00000000bf282000) (0MB)
[ 0.000000] efi: mem170: type=4, attr=0xf, range=[0x00000000bf282000-0x00000000bf6a4000) (4MB)
[ 0.000000] efi: mem171: type=3, attr=0xf, range=[0x00000000bf6a4000-0x00000000bf6a8000) (0MB)
[ 0.000000] efi: mem172: type=4, attr=0xf, range=[0x00000000bf6a8000-0x00000000bf70a000) (0MB)
[ 0.000000] efi: mem173: type=6, attr=0x800000000000000f, range=[0x00000000bf70a000-0x00000000bf70b000) (0MB)
[ 0.000000] efi: mem174: type=4, attr=0xf, range=[0x00000000bf70b000-0x00000000bf70c000) (0MB)
[ 0.000000] efi: mem175: type=3, attr=0xf, range=[0x00000000bf70c000-0x00000000bf712000) (0MB)
[ 0.000000] efi: mem176: type=4, attr=0xf, range=[0x00000000bf712000-0x00000000bf713000) (0MB)
[ 0.000000] efi: mem177: type=3, attr=0xf, range=[0x00000000bf713000-0x00000000bf715000) (0MB)
[ 0.000000] efi: mem178: type=5, attr=0x800000000000000f, range=[0x00000000bf715000-0x00000000bf717000) (0MB)
[ 0.000000] efi: mem179: type=3, attr=0xf, range=[0x00000000bf717000-0x00000000bf718000) (0MB)
[ 0.000000] efi: mem180: type=4, attr=0xf, range=[0x00000000bf718000-0x00000000bf719000) (0MB)
[ 0.000000] efi: mem181: type=5, attr=0x800000000000000f, range=[0x00000000bf719000-0x00000000bf71a000) (0MB)
[ 0.000000] efi: mem182: type=3, attr=0xf, range=[0x00000000bf71a000-0x00000000bf71b000) (0MB)
[ 0.000000] efi: mem183: type=4, attr=0xf, range=[0x00000000bf71b000-0x00000000bfe93000) (7MB)
[ 0.000000] efi: mem184: type=6, attr=0x800000000000000f, range=[0x00000000bfe93000-0x00000000bfe94000) (0MB)
[ 0.000000] efi: mem185: type=4, attr=0xf, range=[0x00000000bfe94000-0x00000000bfe9e000) (0MB)
[ 0.000000] efi: mem186: type=6, attr=0x800000000000000f, range=[0x00000000bfe9e000-0x00000000bfe9f000) (0MB)
[ 0.000000] efi: mem187: type=7, attr=0xf, range=[0x00000000bfe9f000-0x00000000bfeba000) (0MB)
[ 0.000000] efi: mem188: type=2, attr=0xf, range=[0x00000000bfeba000-0x00000000bfec5000) (0MB)
[ 0.000000] efi: mem189: type=10, attr=0xf, range=[0x00000000bfec5000-0x00000000bfec7000) (0MB)
[ 0.000000] efi: mem190: type=9, attr=0xf, range=[0x00000000bfec7000-0x00000000bfec8000) (0MB)
[ 0.000000] efi: mem191: type=10, attr=0xf, range=[0x00000000bfec8000-0x00000000bfeca000) (0MB)
[ 0.000000] efi: mem192: type=9, attr=0xf, range=[0x00000000bfeca000-0x00000000bfecd000) (0MB)
[ 0.000000] efi: mem193: type=10, attr=0xf, range=[0x00000000bfecd000-0x00000000bfedf000) (0MB)
[ 0.000000] efi: mem194: type=9, attr=0xf, range=[0x00000000bfedf000-0x00000000bfeef000) (0MB)
[ 0.000000] efi: mem195: type=7, attr=0xf, range=[0x00000000bfeef000-0x00000000bfef9000) (0MB)
[ 0.000000] efi: mem196: type=0, attr=0xf, range=[0x00000000bfef9000-0x00000000bfeff000) (0MB)
[ 0.000000] efi: mem197: type=6, attr=0x800000000000000f, range=[0x00000000bfeff000-0x00000000bff00000) (0MB)
[ 0.000000] efi: mem198: type=7, attr=0xf, range=[0x0000000100000000-0x0000000240000000) (5120MB)
[ 0.000000] efi: mem199: type=0, attr=0x8000000000000000, range=[0x00000000af000000-0x00000000bf000000) (256MB)
[ 0.000000] efi: mem200: type=11, attr=0x8000000000000000, range=[0x00000000d3400000-0x00000000d3401000) (0MB)
[ 0.000000] efi: mem201: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc40000) (0MB)
[ 0.000000] efi: mem202: type=11, attr=0x8000000000000000, range=[0x00000000ffc40000-0x00000000ffc80000) (0MB)
[ 0.000000] efi: mem203: type=11, attr=0x8000000000000000, range=[0x00000000ffc80000-0x00000000ffca4000) (0MB)
[ 0.000000] efi: mem204: type=11, attr=0x8000000000000000, range=[0x00000000ffca4000-0x00000000ffcb4000) (0MB)
[ 0.000000] efi: mem205: type=11, attr=0x8000000000000000, range=[0x00000000ffcb4000-0x00000000ffffc000) (3MB)
[ 0.000000] efi: mem206: type=11, attr=0x8000000000000000, range=[0x00000000ffffc000-0x0000000100000000) (0MB)
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookPro5,5/Mac-F2268AC8, BIOS MBP55.88Z.00AC.B03.0906151708 06/15/09
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfef9 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbfef8fff]
[ 0.000000] [mem 0x00000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfef8fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbfef8fff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x23fffffff]
[ 0.000000] [mem 0x100000000-0x23fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x23fffffff @ [mem 0xbfef3000-0xbfef8fff]
[ 0.000000] RAMDISK: [mem 0x37a3a000-0x37d14fff]
[ 0.000000] ACPI: RSDP 00000000bfeee014 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 00000000bfeee1c0 00074 (v01 APPLE Apple00 000000AC 01000013)
[ 0.000000] ACPI: FACP 00000000bfeec000 000F4 (v04 APPLE Apple00 000000AC Loki 0000005F)
[ 0.000000] ACPI: DSDT 00000000bfedf000 05B9E (v01 APPLE MacBookP 00050005 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bfecd000 00040
[ 0.000000] ACPI: HPET 00000000bfeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bfeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bfee9000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 00000000bfee8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 00000000bfee7000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 00000000bfee6000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 00000000bfee5000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bfeca000 0023A (v00 SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[ 0.000000] NODE_DATA [mem 0x23fffb000-0x23fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237800000-ffff88023f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xacfecfff]
[ 0.000000] node 0: [mem 0xacfee000-0xae700fff]
[ 0.000000] node 0: [mem 0xae706000-0xae710fff]
[ 0.000000] node 0: [mem 0xae712000-0xae720fff]
[ 0.000000] node 0: [mem 0xae722000-0xae72afff]
[ 0.000000] node 0: [mem 0xae92c000-0xaefbbfff]
[ 0.000000] node 0: [mem 0xaefbd000-0xaeffffff]
[ 0.000000] node 0: [mem 0xbf000000-0xbf015fff]
[ 0.000000] node 0: [mem 0xbf017000-0xbf0a9fff]
[ 0.000000] node 0: [mem 0xbf0ad000-0xbf0aefff]
[ 0.000000] node 0: [mem 0xbf0b1000-0xbf0b2fff]
[ 0.000000] node 0: [mem 0xbf0b8000-0xbf0b9fff]
[ 0.000000] node 0: [mem 0xbf0bb000-0xbf0c2fff]
[ 0.000000] node 0: [mem 0xbf0c5000-0xbf0c6fff]
[ 0.000000] node 0: [mem 0xbf0c9000-0xbf10dfff]
[ 0.000000] node 0: [mem 0xbf112000-0xbf119fff]
[ 0.000000] node 0: [mem 0xbf11d000-0xbf11efff]
[ 0.000000] node 0: [mem 0xbf120000-0xbf224fff]
[ 0.000000] node 0: [mem 0xbf226000-0xbf226fff]
[ 0.000000] node 0: [mem 0xbf23d000-0xbf241fff]
[ 0.000000] node 0: [mem 0xbf243000-0xbf264fff]
[ 0.000000] node 0: [mem 0xbf268000-0xbf26ffff]
[ 0.000000] node 0: [mem 0xbf275000-0xbf276fff]
[ 0.000000] node 0: [mem 0xbf278000-0xbf278fff]
[ 0.000000] node 0: [mem 0xbf27c000-0xbf27ffff]
[ 0.000000] node 0: [mem 0xbf281000-0xbf709fff]
[ 0.000000] node 0: [mem 0xbf70b000-0xbf714fff]
[ 0.000000] node 0: [mem 0xbf717000-0xbf718fff]
[ 0.000000] node 0: [mem 0xbf71a000-0xbfe92fff]
[ 0.000000] node 0: [mem 0xbfe94000-0xbfe9dfff]
[ 0.000000] node 0: [mem 0xbfe9f000-0xbfec4fff]
[ 0.000000] node 0: [mem 0xbfeef000-0xbfef8fff]
[ 0.000000] node 0: [mem 0x100000000-0x23fffffff]
[ 0.000000] On node 0 totalpages: 2030609
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 10 pages reserved
[ 0.000000] DMA zone: 3909 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11187 pages used for memmap
[ 0.000000] DMA32 zone: 704719 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1290240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000acfed000 - 00000000acfee000
[ 0.000000] PM: Registered nosave memory: 00000000ae701000 - 00000000ae706000
[ 0.000000] PM: Registered nosave memory: 00000000ae711000 - 00000000ae712000
[ 0.000000] PM: Registered nosave memory: 00000000ae721000 - 00000000ae722000
[ 0.000000] PM: Registered nosave memory: 00000000ae72b000 - 00000000ae92c000
[ 0.000000] PM: Registered nosave memory: 00000000aefbc000 - 00000000aefbd000
[ 0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000bf000000
[ 0.000000] PM: Registered nosave memory: 00000000bf016000 - 00000000bf017000
[ 0.000000] PM: Registered nosave memory: 00000000bf0aa000 - 00000000bf0ad000
[ 0.000000] PM: Registered nosave memory: 00000000bf0af000 - 00000000bf0b1000
[ 0.000000] PM: Registered nosave memory: 00000000bf0b3000 - 00000000bf0b8000
[ 0.000000] PM: Registered nosave memory: 00000000bf0ba000 - 00000000bf0bb000
[ 0.000000] PM: Registered nosave memory: 00000000bf0c3000 - 00000000bf0c5000
[ 0.000000] PM: Registered nosave memory: 00000000bf0c7000 - 00000000bf0c9000
[ 0.000000] PM: Registered nosave memory: 00000000bf10e000 - 00000000bf112000
[ 0.000000] PM: Registered nosave memory: 00000000bf11a000 - 00000000bf11d000
[ 0.000000] PM: Registered nosave memory: 00000000bf11f000 - 00000000bf120000
[ 0.000000] PM: Registered nosave memory: 00000000bf225000 - 00000000bf226000
[ 0.000000] PM: Registered nosave memory: 00000000bf227000 - 00000000bf23d000
[ 0.000000] PM: Registered nosave memory: 00000000bf242000 - 00000000bf243000
[ 0.000000] PM: Registered nosave memory: 00000000bf265000 - 00000000bf268000
[ 0.000000] PM: Registered nosave memory: 00000000bf270000 - 00000000bf275000
[ 0.000000] PM: Registered nosave memory: 00000000bf277000 - 00000000bf278000
[ 0.000000] PM: Registered nosave memory: 00000000bf279000 - 00000000bf27c000
[ 0.000000] PM: Registered nosave memory: 00000000bf280000 - 00000000bf281000
[ 0.000000] PM: Registered nosave memory: 00000000bf70a000 - 00000000bf70b000
[ 0.000000] PM: Registered nosave memory: 00000000bf715000 - 00000000bf717000
[ 0.000000] PM: Registered nosave memory: 00000000bf719000 - 00000000bf71a000
[ 0.000000] PM: Registered nosave memory: 00000000bfe93000 - 00000000bfe94000
[ 0.000000] PM: Registered nosave memory: 00000000bfe9e000 - 00000000bfe9f000
[ 0.000000] PM: Registered nosave memory: 00000000bfec5000 - 00000000bfec7000
[ 0.000000] PM: Registered nosave memory: 00000000bfec7000 - 00000000bfec8000
[ 0.000000] PM: Registered nosave memory: 00000000bfec8000 - 00000000bfeca000
[ 0.000000] PM: Registered nosave memory: 00000000bfeca000 - 00000000bfecd000
[ 0.000000] PM: Registered nosave memory: 00000000bfecd000 - 00000000bfedf000
[ 0.000000] PM: Registered nosave memory: 00000000bfedf000 - 00000000bfeef000
[ 0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000d3400000
[ 0.000000] PM: Registered nosave memory: 00000000d3400000 - 00000000d3401000
[ 0.000000] PM: Registered nosave memory: 00000000d3401000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] e820: [mem 0xd3401000-0xffbfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s85184 r8192 d21312 u1048576
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998868
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=95744744-5122-437b-82a7-6eb85b3a6448 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7867236k/9437184k available (4908k kernel code, 1314748k absent, 255200k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33030144 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2520.552 MHz processor
[ 0.006670] Calibrating delay loop (skipped), value calculated using timer frequency.. 5043.15 BogoMIPS (lpj=8401840)
[ 0.006674] pid_max: default: 32768 minimum: 301
[ 0.006728] init_memory_mapping: [mem 0xbfeff000-0xbfefffff]
[ 0.006732] [mem 0xbfeff000-0xbfefffff] page 4k
[ 0.108797] Security Framework initialized
[ 0.108812] AppArmor: AppArmor disabled by boot time parameter
[ 0.109405] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.113644] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.115625] Mount-cache hash table entries: 256
[ 0.115855] Initializing cgroup subsys cpuacct
[ 0.115861] Initializing cgroup subsys memory
[ 0.115872] Initializing cgroup subsys devices
[ 0.115873] Initializing cgroup subsys freezer
[ 0.115875] Initializing cgroup subsys net_cls
[ 0.115876] Initializing cgroup subsys blkio
[ 0.115906] CPU: Physical Processor ID: 0
[ 0.115908] CPU: Processor Core ID: 0
[ 0.115909] mce: CPU supports 6 MCE banks
[ 0.115917] CPU0: Thermal monitoring enabled (TM2)
[ 0.115921] process: using mwait in idle threads
[ 0.115926] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.116037] Freeing SMP alternatives: 20k freed
[ 0.117279] ACPI: Core revision 20121018
[ 0.122421] ftrace: allocating 19310 entries in 76 pages
[ 0.127205] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.162234] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz (fam: 06, model: 17, stepping: 0a)
[ 0.163333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.163333] ... version: 2
[ 0.163333] ... bit width: 40
[ 0.163333] ... generic registers: 2
[ 0.163333] ... value mask: 000000ffffffffff
[ 0.163333] ... max period: 000000007fffffff
[ 0.163333] ... fixed-purpose events: 3
[ 0.163333] ... event mask: 0000000700000003
[ 0.183381] smpboot: Booting Node 0, Processors #1 OK
[ 0.196585] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.196598] Brought up 2 CPUs
[ 0.196600] smpboot: Total of 2 processors activated (10086.30 BogoMIPS)
[ 0.196754] devtmpfs: initialized
[ 0.200695] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xae72b000-0xae92bfff] (2101248 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xbf0c3000-0xbf0c4fff] (8192 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xbf0c7000-0xbf0c8fff] (8192 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xbfec5000-0xbfec6fff] (8192 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xbfec8000-0xbfec9fff] (8192 bytes)
[ 0.200695] PM: Registering ACPI NVS region [mem 0xbfecd000-0xbfedefff] (73728 bytes)
[ 0.200695] reboot: PCI series board detected. Selecting Apple MacBookPro5-method for reboots.
[ 0.200968] RTC time: 19:38:09, date: 04/10/13
[ 0.201010] NET: Registered protocol family 16
[ 0.201155] ACPI: bus type pci registered
[ 0.201432] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.201436] PCI: not using MMCONFIG
[ 0.201437] PCI: Using configuration type 1 for base access
[ 0.202036] bio: create slab <bio-0> at 0
[ 0.202036] ACPI: Added _OSI(Module Device)
[ 0.202036] ACPI: Added _OSI(Processor Device)
[ 0.202036] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.202036] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.203975] ACPI: EC: EC description table is found, configuring boot EC
[ 0.204980] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.205258] ACPI: SSDT 00000000bfec9c18 002BC (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.206701] ACPI: Dynamic OEM Table Load:
[ 0.206704] ACPI: SSDT (null) 002BC (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.206781] ACPI: SSDT 00000000bfec9918 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.207019] ACPI: Dynamic OEM Table Load:
[ 0.207021] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.207035] ACPI: SSDT 00000000bfec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.207092] ACPI: Dynamic OEM Table Load:
[ 0.207095] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.207166] ACPI: SSDT 00000000bfec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.207404] ACPI: Dynamic OEM Table Load:
[ 0.207406] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.210187] ACPI: Interpreter enabled
[ 0.210191] ACPI: (supports S0 S3 S4 S5)
[ 0.210205] ACPI: Using IOAPIC for interrupt routing
[ 0.210218] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.211630] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources
[ 0.211633] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.250237] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62
[ 0.250366] ACPI: No dock devices found.
[ 0.250370] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.250424] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.250427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.253481] pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.253598] pci_root PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.253674] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce7ff])
[ 0.253679] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.253708] PCI host bridge to bus 0000:00
[ 0.253711] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.253713] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.253715] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.253717] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.253719] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.253721] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.253723] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.253725] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.253727] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.253729] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.253731] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.253733] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.253735] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.253737] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.253739] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.253741] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.253743] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.253757] pci 0000:00:00.0: [10de:0a82] type 00 class 0x060000
[ 0.253858] pci 0000:00:00.1: [10de:0a88] type 00 class 0x050000
[ 0.254001] pci 0000:00:03.0: [10de:0aae] type 00 class 0x060100
[ 0.254010] pci 0000:00:03.0: reg 10: [io 0x2000-0x20ff]
[ 0.254052] pci 0000:00:03.1: [10de:0aa4] type 00 class 0x050000
[ 0.254130] pci 0000:00:03.2: [10de:0aa2] type 00 class 0x0c0500
[ 0.254143] pci 0000:00:03.2: reg 10: [io 0x2180-0x21bf]
[ 0.254163] pci 0000:00:03.2: reg 20: [io 0x2140-0x217f]
[ 0.254169] pci 0000:00:03.2: reg 24: [io 0x2100-0x213f]
[ 0.254203] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.254225] pci 0000:00:03.3: [10de:0a89] type 00 class 0x050000
[ 0.254362] pci 0000:00:03.4: [10de:0a98] type 00 class 0x050000
[ 0.254418] pci 0000:00:03.5: [10de:0aa3] type 00 class 0x0b4000
[ 0.254436] pci 0000:00:03.5: reg 10: [mem 0xd3400000-0xd347ffff]
[ 0.254561] pci 0000:00:04.0: [10de:0aa5] type 00 class 0x0c0310
[ 0.254572] pci 0000:00:04.0: reg 10: [mem 0xd3488000-0xd3488fff]
[ 0.254616] pci 0000:00:04.0: supports D1 D2
[ 0.254618] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254634] pci 0000:00:04.1: [10de:0aa6] type 00 class 0x0c0320
[ 0.254647] pci 0000:00:04.1: reg 10: [mem 0xd3489200-0xd34892ff]
[ 0.254700] pci 0000:00:04.1: supports D1 D2
[ 0.254702] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254725] pci 0000:00:06.0: [10de:0aa7] type 00 class 0x0c0310
[ 0.254736] pci 0000:00:06.0: reg 10: [mem 0xd3487000-0xd3487fff]
[ 0.254780] pci 0000:00:06.0: supports D1 D2
[ 0.254782] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254797] pci 0000:00:06.1: [10de:0aa9] type 00 class 0x0c0320
[ 0.254809] pci 0000:00:06.1: reg 10: [mem 0xd3489100-0xd34891ff]
[ 0.254862] pci 0000:00:06.1: supports D1 D2
[ 0.254864] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254887] pci 0000:00:08.0: [10de:0ac0] type 00 class 0x040300
[ 0.254898] pci 0000:00:08.0: reg 10: [mem 0xd3480000-0xd3483fff]
[ 0.254943] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.254955] pci 0000:00:09.0: [10de:0aab] type 01 class 0x060401
[ 0.255000] pci 0000:00:0a.0: [10de:0ab0] type 00 class 0x020000
[ 0.255011] pci 0000:00:0a.0: reg 10: [mem 0xd3486000-0xd3486fff]
[ 0.255017] pci 0000:00:0a.0: reg 14: [io 0x21e0-0x21e7]
[ 0.255022] pci 0000:00:0a.0: reg 18: [mem 0xd3489000-0xd34890ff]
[ 0.255028] pci 0000:00:0a.0: reg 1c: [mem 0xd3489300-0xd348930f]
[ 0.255064] pci 0000:00:0a.0: supports D1 D2
[ 0.255066] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.255083] pci 0000:00:0b.0: [10de:0ab9] type 00 class 0x010601
[ 0.255094] pci 0000:00:0b.0: reg 10: [io 0x21d8-0x21df]
[ 0.255099] pci 0000:00:0b.0: reg 14: [io 0x21ec-0x21ef]
[ 0.255105] pci 0000:00:0b.0: reg 18: [io 0x21d0-0x21d7]
[ 0.255110] pci 0000:00:0b.0: reg 1c: [io 0x21e8-0x21eb]
[ 0.255116] pci 0000:00:0b.0: reg 20: [io 0x21c0-0x21cf]
[ 0.255121] pci 0000:00:0b.0: reg 24: [mem 0xd3484000-0xd3485fff]
[ 0.255164] pci 0000:00:10.0: [10de:0aa0] type 01 class 0x060400
[ 0.255201] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.255257] pci 0000:00:15.0: [10de:0ac6] type 01 class 0x060400
[ 0.255474] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.255557] pci 0000:00:16.0: [10de:0ac7] type 01 class 0x060400
[ 0.255773] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.255870] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.255875] pci 0000:00:09.0: bridge window [mem 0xd3300000-0xd33fffff]
[ 0.255878] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.255880] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.255882] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.255884] pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.255886] pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.255888] pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.255890] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.255892] pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.255894] pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.255896] pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.255898] pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.255900] pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.255902] pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.255904] pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.255906] pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.255908] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.255937] pci 0000:02:00.0: [10de:0863] type 00 class 0x030000
[ 0.255951] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.255960] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.255970] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.255976] pci 0000:02:00.0: reg 24: [io 0x1000-0x107f]
[ 0.255983] pci 0000:02:00.0: reg 30: [mem 0xd3000000-0xd301ffff pref]
[ 0.256041] pci 0000:00:10.0: PCI bridge to [bus 02]
[ 0.256044] pci 0000:00:10.0: bridge window [io 0x1000-0x1fff]
[ 0.256047] pci 0000:00:10.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.256051] pci 0000:00:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.256356] pci 0000:03:00.0: [14e4:432b] type 00 class 0x028000
[ 0.256375] pci 0000:03:00.0: reg 10: [mem 0xd3200000-0xd3203fff 64bit]
[ 0.256469] pci 0000:03:00.0: supports D1 D2
[ 0.256471] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.260174] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.260193] pci 0000:00:15.0: bridge window [mem 0xd3200000-0xd32fffff]
[ 0.260357] pci 0000:04:00.0: [11c1:5901] type 00 class 0x0c0010
[ 0.260378] pci 0000:04:00.0: reg 10: [mem 0xd3100000-0xd3100fff 64bit]
[ 0.260471] pci 0000:04:00.0: supports D1 D2
[ 0.260473] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.266686] pci 0000:00:16.0: PCI bridge to [bus 04]
[ 0.266706] pci 0000:00:16.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.266790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.268128] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *16
[ 0.268199] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *16
[ 0.268267] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *16
[ 0.268335] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *16
[ 0.268404] ACPI: PCI Interrupt Link [Z003] (IRQs *16 17 18 19 20 21 22 23)
[ 0.268474] ACPI: PCI Interrupt Link [Z004] (IRQs *16 17 18 19 20 21 22 23)
[ 0.268542] ACPI: PCI Interrupt Link [Z005] (IRQs *16 17 18 19 20 21 22 23)
[ 0.268610] ACPI: PCI Interrupt Link [Z006] (IRQs *16 17 18 19 20 21 22 23)
[ 0.268676] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.268743] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.268809] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.268877] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.268945] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.269013] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.269081] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.269153] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.269223] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.269293] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.269365] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.269439] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.269508] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 *19 20 21 22 23)
[ 0.269576] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 *19 20 21 22 23)
[ 0.269644] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 *19 20 21 22 23)
[ 0.269712] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 *19 20 21 22 23)
[ 0.269779] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.269848] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.269917] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.269984] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.270059] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.270127] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.270196] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.270265] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.270333] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 *22 23)
[ 0.270403] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.270471] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 *22 23)
[ 0.270539] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.270606] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 *20 21 22 23)
[ 0.270674] ACPI: PCI Interrupt Link [LGPU] (IRQs *16 17 18 19 20 21 22 23)
[ 0.270740] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.270808] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.270876] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.270944] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.271011] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 *23)
[ 0.271077] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.271142] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.271142] vgaarb: loaded
[ 0.271142] vgaarb: bridge control possible 0000:02:00.0
[ 0.271142] PCI: Using ACPI for IRQ routing
[ 0.271777] PCI: pci_cache_line_size set to 64 bytes
[ 0.272167] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.272169] e820: reserve RAM buffer [mem 0xacfed000-0xafffffff]
[ 0.272171] e820: reserve RAM buffer [mem 0xae701000-0xafffffff]
[ 0.272173] e820: reserve RAM buffer [mem 0xae711000-0xafffffff]
[ 0.272175] e820: reserve RAM buffer [mem 0xae721000-0xafffffff]
[ 0.272177] e820: reserve RAM buffer [mem 0xae72b000-0xafffffff]
[ 0.273335] e820: reserve RAM buffer [mem 0xaefbc000-0xafffffff]
[ 0.273337] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[ 0.273338] e820: reserve RAM buffer [mem 0xbf016000-0xbfffffff]
[ 0.273346] e820: reserve RAM buffer [mem 0xbf0aa000-0xbfffffff]
[ 0.273355] e820: reserve RAM buffer [mem 0xbf0af000-0xbfffffff]
[ 0.273363] e820: reserve RAM buffer [mem 0xbf0b3000-0xbfffffff]
[ 0.273371] e820: reserve RAM buffer [mem 0xbf0ba000-0xbfffffff]
[ 0.273378] e820: reserve RAM buffer [mem 0xbf0c3000-0xbfffffff]
[ 0.273386] e820: reserve RAM buffer [mem 0xbf0c7000-0xbfffffff]
[ 0.273393] e820: reserve RAM buffer [mem 0xbf10e000-0xbfffffff]
[ 0.273400] e820: reserve RAM buffer [mem 0xbf11a000-0xbfffffff]
[ 0.273407] e820: reserve RAM buffer [mem 0xbf11f000-0xbfffffff]
[ 0.273414] e820: reserve RAM buffer [mem 0xbf225000-0xbfffffff]
[ 0.273420] e820: reserve RAM buffer [mem 0xbf227000-0xbfffffff]
[ 0.273427] e820: reserve RAM buffer [mem 0xbf242000-0xbfffffff]
[ 0.273433] e820: reserve RAM buffer [mem 0xbf265000-0xbfffffff]
[ 0.273439] e820: reserve RAM buffer [mem 0xbf270000-0xbfffffff]
[ 0.273444] e820: reserve RAM buffer [mem 0xbf277000-0xbfffffff]
[ 0.273449] e820: reserve RAM buffer [mem 0xbf279000-0xbfffffff]
[ 0.273454] e820: reserve RAM buffer [mem 0xbf280000-0xbfffffff]
[ 0.273459] e820: reserve RAM buffer [mem 0xbf70a000-0xbfffffff]
[ 0.273463] e820: reserve RAM buffer [mem 0xbf715000-0xbfffffff]
[ 0.273467] e820: reserve RAM buffer [mem 0xbf719000-0xbfffffff]
[ 0.273471] e820: reserve RAM buffer [mem 0xbfe93000-0xbfffffff]
[ 0.273475] e820: reserve RAM buffer [mem 0xbfe9e000-0xbfffffff]
[ 0.273478] e820: reserve RAM buffer [mem 0xbfec5000-0xbfffffff]
[ 0.273481] e820: reserve RAM buffer [mem 0xbfef9000-0xbfffffff]
[ 0.273574] NetLabel: Initializing
[ 0.273576] NetLabel: domain hash size = 128
[ 0.273577] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.273589] NetLabel: unlabeled traffic allowed by default
[ 0.273602] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.273607] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.273612] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.283342] Switching to clocksource hpet
[ 0.289156] pnp: PnP ACPI init
[ 0.289175] ACPI: bus type pnp registered
[ 0.289295] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.289300] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289343] pnp 00:01: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.289394] pnp 00:02: [dma 4]
[ 0.289421] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.289505] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.289509] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.289543] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.289640] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.289642] system 00:05: [io 0x0480-0x04ff] has been reserved
[ 0.289644] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.289647] system 00:05: [io 0x0580-0x05ff] has been reserved
[ 0.289649] system 00:05: [io 0x0800-0x087f] has been reserved
[ 0.289651] system 00:05: [io 0x0880-0x08ff] has been reserved
[ 0.289653] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.289656] system 00:05: [io 0x0295-0x0296] has been reserved
[ 0.289659] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289687] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.293453] pnp: PnP ACPI: found 7 devices
[ 0.293455] ACPI: ACPI bus type pnp unregistered
[ 0.300917] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 0.300923] pci 0000:00:09.0: bridge window [mem 0xd3300000-0xd33fffff]
[ 0.300929] pci 0000:00:10.0: PCI bridge to [bus 02]
[ 0.300932] pci 0000:00:10.0: bridge window [io 0x1000-0x1fff]
[ 0.300935] pci 0000:00:10.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.300938] pci 0000:00:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.300942] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.300952] pci 0000:00:15.0: bridge window [mem 0xd3200000-0xd32fffff]
[ 0.300971] pci 0000:00:16.0: PCI bridge to [bus 04]
[ 0.300981] pci 0000:00:16.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.301002] pci 0000:00:09.0: enabling device (0000 -> 0002)
[ 0.301008] pci 0000:00:09.0: setting latency timer to 64
[ 0.301013] pci 0000:00:10.0: setting latency timer to 64
[ 0.301131] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 21
[ 0.301247] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 19
[ 0.301258] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.301261] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.301263] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.301265] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.301267] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.301269] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.301271] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.301273] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.301274] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.301276] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.301278] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.301280] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.301282] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.301284] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.301286] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.301288] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff]
[ 0.301290] pci_bus 0000:01: resource 1 [mem 0xd3300000-0xd33fffff]
[ 0.301292] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.301294] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.301296] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.301298] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.301300] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.301302] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.301304] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.301306] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.301307] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]Sorry i don't really know how to access the boot messages? All other distros stored this information in /var/log/boot but i assume Arch doesn't :-/
peter@antartica ~ $ systemd-analyze blame
5s 12ms 753us [email protected]
276ms 771us wicd.service
170ms 510us bluetooth.service
163ms 497us systemd-udev-trigger.service
136ms 982us alsa-restore.service
114ms 708us laptop-mode.service
109ms 867us lm_sensors.service
83ms 663us tmp.mount
73ms 285us systemd-vconsole-setup.service
73ms 251us systemd-tmpfiles-setup.service
68ms 116us polkit.service
67ms 1us sys-kernel-debug.mount
64ms 340us systemd-sysctl.service
63ms 773us dev-mqueue.mount
60ms 100us var-tmp.mount
59ms 797us systemd-user-sessions.service
56ms 847us dev-hugepages.mount
50ms 242us systemd-logind.service
50ms 139us sys-kernel-config.mount
46ms 682us systemd-remount-fs.service
42ms 955us systemd-journal-flush.service
36ms 900us udisks2.service
36ms 807us systemd-udevd.service
18ms 279us upower.service
16ms 458us rtkit-daemon.service
1ms 864us systemd-random-seed-load.service -
Shut down and boot are slow, here are the console messages
Since upgrading from Tiger, my shutdown and boot times are a bit slower. They are not painfully slow, perhaps 30-45 seconds for shutdown and 45-60 seconds for boot. However, booting in 20-30 seconds and shutting down in less time was one of the great things about OS X to me and I think I can solve the problem if someone can tell me what is wrong in these console messages:
11/13/07 2:17:19 PM com.apple.loginwindow[36] Shutdown NOW!
11/13/07 2:17:19 PM com.apple.loginwindow[36] System shutdown time has arrived
*11/13/07 2:17:19 PM com.apple.SystemStarter[31] /etc/rc.common: line 86: StopService: command not found*
11/13/07 2:17:55 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
*11/13/07 2:17:57 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight*
11/13/07 2:18:21 PM com.apple.SystemStarter[31] -s Starting WD MyBook Services
11/13/07 2:18:32 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[85]) Exited: Terminated
11/13/07 2:18:32 PM com.apple.launchctl.Aqua[105] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/RemoteUI.plist
The two lines that seem to be problematic are bold. I know CUPS has to do with printer sharing, but I don't know how to stop this. I already tried zapping PRAM and repairing permissions.
Any help in stopping the two errors above would be greatly appreciated!My boot time went back up to 1 minute after the 10.5.1 update. Is there anything wrong with the above log?
-
Continuously re-starting or shutting down and booting up iMac
Will anything bad happen to the iMac or drive or anything like that if you restart your iMac several times every five minutes? I ask because a friend was having trouble with opening something and re-started his iMac 6 times in a row in hopes of being able to run something better. Will this have damaged anything like the hard disk or drive?
Thanks!Jesse Smith wrote:
What is processor control, though?
When you click on "Shut Down" or "Restart" in the system menu (the left corner of the menu bar), OS-X tells the Intel processor to run a program that brings the machine down gracefully -- turning things off in the proper order. Holding down the "power button" to force a shutdown does the same thing -- the button doesn't turn off the power, it just tells the processor to run the shutdown program. The program turns off the power when it's finished.
OTOH, if you just "pull the plug," everything suddenly loses power without having a chance to "tidy up" before the lights go out. If that happens in the middle of a partially-completed write to disk, you can easily end up with a corrupted file system. No permanent hardware damage, but the machine might not be able to reboot -- until you re-install the OS.
Looby -
Infopackage takes longer than usual
Hi
I've got an Infopackage that normally loads at 7 mins long.
But intermittently (e.g. once a week), the loading will take more than
1 hour.
May I know what is the possible cause for such problems?
Rgds
Rusyinni1. Limit the amount of created data packages for each load between 1000 -1500 as described in below mentioned SAP OSS note:
892513 - Consulting: Performance: Loading data, no of pkg, req size
Note: 1000-1500 = sum of data packages over all data targets, i.e. with three targets 350-500 packages
How to limit the amount of data packages for the delta load:
Go to transaction RSA1 select your dedicated infopackage -- menue-- DataS. Default Data transfer --enter the max. nummber of data packages to be created for each delta load.
2. Global level :Use Transaction RSCUSTV6 for changing configuration setting for all the infopackages globally :
(i).Frequency with which status Idocs are sent : It means how many data-IDocs are described by one Info-IDoc.In simple terms after how many data idocs 1 info idocs to be sent .The larger the packet size for a data IDoc, the smaller you should set the frequency. By doing this, you make it possible to get information on the respective data load status in relatively short time periods when uploading data.You should choose a frequency between 5 and 10 but not greater than 20.
(ii)Datapacket size (Number of Data Records per Package) The basic setting should be between 5000 and 20000 depending on how many data records you want to load
.Recommendation :You should not divide up the quantity of data into too large a number of packets since this reduces performance when uploading. The number of data packets should not be more than 100 per loading process.
(III) ROIDOCPRMS : In order to make the RSCUSTV6 settings work you also need to do the related setting in ROIDOCPRMS in source system .
3. Increase the parallelization of the infopackage if possible
Got to transaction SBIW increase the amount of wp which can be used.
Please read also OSS note:
595251 - Performance of data mart: Deactivating tRFC sending in BW
4.. Our Infopackage consists of 3 type of message types RSINFO , RSREQ , RSSEND etc. There is a standard program RSEOUT00 in the source system that is used to pushed IDOCS to OS layer .Therefore create variants for the above message type for this program in the source system .Also create some Background job for this to be run after every 30 minutes .You should not increase the frequency more than this .
Hope this helps . -
Startup Takes Longer Than Usual
Lately, my MacBook Pro is taking longer to startup than usual. The initial grey apple logo screen is taking a good 10-15 seconds when it used not to. Does anyone know if this has anything to do with recent software/firmware updates???
The links to instructions:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
Resetting MacBook and MacBook Pro System Management Controller (SMC)
http://docs.info.apple.com/article.html?artnum=303319
Resetting your Mac's PRAM and NVRAM
http://docs.info.apple.com/article.html?artnum=2238 -
Boot Problem! Slow start up, shut down and wake from sleep mode.
I have a MBP late 2009. I used it a long time whit Snow Leopard, few month ago i did an upgrade to Mavericks.
To start up it takes 30-40 seconds until appear the apple logo. Then 2 minutes more to start up the sistem.
When I wake the machine from sleep mode it takes 40 seconds to be working.
Shut down 40 seconds.
Even sometime it get frezze using only Safari.
Things I have tried:
Reinstall Snow Leopard (clean install)
Install Mavericks (clean install)
Replace the HD
¿Any idea?
Sorry for mi poor EnglishChepoka,
have you ensured that all of your installed software is compatible with Mavericks?
If you boot into Safe mode, does it still take 40 seconds to awaken from sleeping, or to shut down? (It will take longer to start up in Safe mode because it will perform “sanity checks” on your boot disk.)
If you have a bootable external disk with Mavericks installed, use Startup Manager to boot from the external disk. Does it take just as long to boot, awaken from sleep, and shut down from the external disk as it does from the internal disk? -
My IBOOK has shut down, and will not start back up
ok here is what has happened. yesterday my 1.2ghz g4 ibook started randomly shutting down. it would shut down and it would take a while of me pushing the power button to get it to start back up. when it would come on, it would switch between charging and not charged quite rapidly even though my power cord was in. now however, it has shut down and will not start up. the battery is fully charged. anyone have any ideas?
I'm telling you. I have lost all faith with Apple. The old iBook I had, 800MHz G4, simply worked fine with no problem waking up or starting up, although it's just a bit slow. Now, I am super frustrated when it just couldn't wake up, either with the sleep light flashing or not, ie it's black screen initially and when I press the Power button once to get it back to life, it just stays black!!!
So the only thing to do is to force power down by pressing the Power button for 10 seconds. Then I press the Power button once to start up, but it just stays black screen. I've left my iBook in that state for a day now, hoping that it will come back alife. But no! And the worst is, I had a similar problem starting up from wake just the day before. I called the Help Desk and they advised me step by step, from taking out the battery, to pressing OptionsCommand+PR, and OptionsCommand+OC, and doing Apple Hardware Test. The iBook seems to just work fine while on the phone with them. And barely 3 hours later, the thing just couldn't wake up. I've powered down and up many times now, and I've left it powering up, but still black screen till now (one day already).
Finding out about resetting PMU on the support page, I've also tried that, but it still can't work.
And you know what? I've sent this unit for repair 3 times already! First they say it's the HDD problem, so they changed that. Then when it still happened, they say it's the logic board problem, so they changed that for me. And again when it happened, they changed another logic board for me. So now, it's the fourth time, what do you think I should do? I don't think going back changing another logic board will help!
I am in fact ****** off! If Macs are great, then why me? Why my iBook? I am telling this forum that we cannot accept a big corporation giving us sub-standard products. I've since read this forum carefully and found that many of us faced the same problem! We just cannot sit down idly and let the company get away with it. This is a warning to fellow users out there that face this same problem. Let us voice out our frustrations and make Apple give us some compensation for it. I say this because I depend on my laptop iBook for presentation to clients, and this happened exactly twice when I was in front of my clients. I don't mind losing face but can Apple compensate me for my loss of business and future business from my clients?
Voice out strongly your unhappiness to Apple now! -
Hi plz help me here .. I update my macbook air running with Mac 10.8.5 to yosemite and it will take too long to shut down and when stars it will like its gonig update?
More information would be helpful.
-
SInce upgrading to OS 8.0.2 my ipad 2 freezes, slows down, safari takes forever to open pages, cellular network goes to No Service requiring a reboot (and this takes longer than before), in summary, I now have a fancy paperweight, i used to love my ipad. I feel as if Microsoft has taken charge of the Apple Software Division.
Sorry if someone sees this post in a different thread; Just want to get some additional exposure.. Who knows, maybe someone from Apple will take note..
The glitchy, unresponsive, slow and outright crashes are something you would expect in a less superior product. I paid what I consider a premium because of the perceived integrity of the company and quality of their products. I am not going to go as far to say Apple ***** and so do their products; but they have to to a better job of acknowledging problems and providing recourse. Right now, it "feels" like they don't care about existing customers. I am not sure of the exact #'s, but I believe products like the Ipad2 represent a significant population of their existing Ipad product base.
So what is my specific rant; If Apple is going to take a long time, or worst, NOT fix the problems introduced in IOS 8 for IPAD 2, give us the option of going back to IOS 7. I would say most everyone was extremely happy with their product running under that OS and would migrate back in a heartbeat. By blocking this option, it feels like Apple is saying that the only recourse is to live with crappy performance, wait forever without any real news, or throw away your Ipad 2 and buy a newer model. Right now this is 100% completely unacceptable, and I, as will thousands of others, will watch how this unfolds when we do buy new products. Most technology products only have short, finite lifespan and I would think it is at very least very important to Apple to retain customer base in a highly competitive marketplace. I'm done... -
My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
Any help is appreciated.Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?
johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/ -
i got macbook pro 13" i bought in 2011 but its now getting slow when i start up or when shutting down .and apps takes time to open like just bouncing????????
See the Mac OS X Speed FAQ.
-
When i take a photo or a video using the camera on my ipod touch, the computer (windows xp) shuts down and a blue screen comes up saying "an error has occured" and a heap of oth stuff in white. It doesn't wipe the memory or anything off the ipod. Whenever i sync my ipod without photos or videos it works fine. It also doesn't mind me taking photos off itunes to put on the ipod. I have had a look around and a couple of people say reinstall itunes, but i don't know if i will lose all my songs and apps. Any suggestions of help?
Removing all Apple related software and reinstalling iTunes should bring all needed drivers back: Removing iTunes, QuickTime, and other software components for Windows XP
Also check for new driver updates for Windows, especially if you have a webcam installed.
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
copied from the article about reinstalling iTunes
Maybe you are looking for
-
Why can't I redeem my gift card... only took money from my credit card
I redeemed my itunes gift card, shows the amount in my account, but still took money from my credit card account.
-
Why does my username and password doesn't work on ff and it works on other browsers?
Hello. I'm having a problem with login on my adsl modem page by using it's username and password. I've been having the same problem since ff5 or ff6 and now the problem remains on ff9.0.1 When I type on address bar 192.168.2.1, to get on my modem's p
-
Hi, I am facing few problems with the Database Studio perspective. I have elaborated the issues below. Please do give your suggestions: I had installed the Java EE 5 server and NWDS together initially with instance id name being JEE. However i was fa
-
IPhone 4 cannot start after update to iOS 7.1
Hello, I have an iPhone 4 with iOS 5.0. I didn't upgrade it to 7.0 because my friends have some problems with performance after updateing to 7.0. Today my friend said that iOS 7.1 have fixed issues with performance on iPhone 4&4S, so I updates my OS.
-
I honestly don't know how to describe this.
You see, I am a youtube who specializes in a thing called youtube commentaries, where we show the viewer a bad video and interject why it is wrong with pictures, usually putting in effects and jokes to entertain. I bought a creative cloud subscriptio