Shut Down and Power Off

I am about to change to a 27" i7 mac from my current PC and have a shut down question.
My computer is plugged in to an energy saver adaptor plug. With this plug you have your computer in one sockets and you power strip for other peripheral in another socket on the adaptor. When you turn of the computer it detect the power drop and COMPLETELY turn of all power to the adaptor, thus ensuring everything else is off too (Printer, Speakers, Scanner and so-on) including the computer.
Will this be a problem when using it with an iMAC

I imagine that the adapter should work the same with the iMac. If you turn the iMac off, the adapter should perceive the same drop in demand for electricity and cut the power to the other devices.
However, many folks do not turn off their iMac, they merely put it to sleep. This sleep mode is very low in power consumption, but saves wear & tear on the iMac's hardware. Since the iMac draws very little power in sleep mode the adapter should perceive a similar drop in power demand and cut the power to the other devices, but you can only know that for sure by experimenting.
Dah•veed

Similar Messages

  • Shutdown? How do I get windoze 10 to SHUT DOWN and TURN OFF?

    I have a ThinkPad T60, with an Intel T7200 CPU, 4GB memory, ATI Fire graphics, 320GB hdd. Windoze (no not a typo) 10 as the ONLY operationg system on the machine. When I shut down the computer, it does NOT fully shut down, it goes into hyper sleep mode?
    Whatever. I have NEVER in all my years of using laptops (my first was a ThinkPad 380XD with Win 95) used sleep mode or hibernate. I have found those methods of shutting down to be buggy. Windoze 10 is STILL buggy on sleep mode. Why can I NOT shut down the
    comptuer properly without doing a hard shutdown? When Windoze 10 (this is why I call it windoze) restarts from its hybrid sleep mode the computer takes more than 10 minutes to boot and load into the logon screen. This happens EVERY time I use the normal shutdown
    method of Start, clidking the little circle i button and choosing shutdown. It puts the computer to sleep. When recovering from this moronic sleep mode it seriously takes 10 minutes or more to eventually load the logon screen. I can turn the laptop on, go
    grind coffee beans, change out the Mr Coffee filter and put in fresh grind, fill the water reservoir and start the brewing process and BREW a full 12 cup pot of coffee BEFORE Windoze 10 is ready with the logon screen! I have not been able to find settings
    to select what the power button and shutdown command does. I have set the computers Power Options to NEVER SLEEP and NEVER HIBERNATE. When I shut my computer off, I want it OFF. Not going to some craptacular hybrid sleep mode that doesn't do what it's supposed
    to. Keep my drivers in stasis so the computer boots faster. BULLDUST! 10 minutes is NOT faster. I can hold the power button 4 seconds and do a hard shutdown and Windoze 10 boots and loads in less than one minute with NO error message about not shutting down
    correctly. What gives?
    My TP 380XD (yes it still runs) with 266mhz cpu and 96MB memory running Windows 2000 runs circles around Windoze 10 on the T60!
    Oh and Cortana and Bing are about the most useless search feature I've ever had the aggravation to try.

    BJB
    Suspect it has "dozed" off.  Can we get your event viewer logs
    Please provide us with your Event Viewer administrative logs by following these steps:
    Click Start Menu
    Type eventvwr into Search programs and files (do not hit enter)
    Right click eventvwr.exe and click Run as administrator
    Expand Custom Views
    Click Administrative Events
    Right click Administrative Events
    Save all Events in Custom View As...
    Save them in a folder where you will remember which folder and save as Errors.evtx
    Go to where you saved Errors.evtx
    Right click Errors.evtx -> send to -> compressed (zipped) folder
    Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
    If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem.
     The work around is to edit the registry.  If you are not comfortable doing this DONT.  If you are, backup the key before you do
    Press Win+"R" and input regedit
    Navigate to:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
    Wanikiya and Dyami--Team Zigzag

  • Our Mini IPad shows a window box that states we have not backed up our I cloud in 9 weeks. Plug in with internet service.  That screen is froze. When you hit connect it does nothing. I tired to shut down, but power off button is greyed out so not an optio

    Our I-Pad has never connected with our wireless internet from since we got it. Our laptop connects just fine and we have a strong signal.  We now have a locked screen stated that I-cloud has not been backed up in 9 weeks. Plug into internet?  However when you click the button to try to get to the internet it does nothing. The power off button is greyed out so not an option to shut down. Just froze on that screen?
    Any help would be greatly appreciated:)
    Thank you in advance.

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have the WatchESPN App downloaded on my iPad. Every time I click to watch the US OPen, the app shuts down and clicks off. Is there a way to fix the bug. I already rebooted my iPad and reloaded the app

    I have the WatchESPN app downloaded to my iPad. Everytime I ry and watch the US Open the app shuts itself down. Any clue how to fix this bug. I already rebooted iPad and reloaded the app.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • When i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warren

    when i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warrenty

    When you plug it in to iTunes does it show up under devices? Try restoring it. That's the best thing you can do if you're out of warrenty

  • My Power Mac G5 is freezing up. A few days ago my G5 started freezing up, the cursor is unresponsive and none of the keys have any use. I have to press the power button to shut down and then restart. Sometimes on the restart, instead of the Apple logo I g

    A few days ago my G5 started to freeze up while in use. It doesn't matter if in Safari, iTunes, Pages, etc. The cursor will not respond nor does any keystroke, force quit, escape, etc. I have to hold the power button down to shut the computer down. Then, try to restart. Sometimes restart will work and the computer will work for a while and then freeze again. Other times on restart, instead of the Apple logo at start up, I get a Zero with a line thru it, have to power off and restart again. When it does restart, the "spinning gear" takes a lot longer than normal to spin up and take me to the login screen. Have been told it may be my hard drive getting ready to fail. Have looked at disk utilities, S.M.A.R.T looks fine, "verified" and have verified disk, and repaired permissions. In case it is the hard drive, I bought external hard drive and hooked it up to Time Machine. The backing up to a long time, overnight, about 10 hours because it kept freexing up and I would have to shut down and try restarting again. Finally got everything backed up.
    Any help or suggestions greatly appreciated!!!   Could it be my hard drive is dying? Is the the normal chain of events or is it something else???

    Ok, to copy the Drive from one to another, get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    Believe it or not, anything on the Desktop uses 3 times the Resources of the Mac than if stored elsewhere, I can note a slowdown from just 30 items on the Desktop on a really fast Mac, so the less the better on the Desktop.
    DW will not tell you about Bad Sectors, it's just the very best at Repair Directory damage & such.
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

  • Iphone 4 just turned itself off, won't turn on again - sleep/wake button hasn't worked for a while - tried charging (even though it was 50% charged when it shut down) and that makes no difference....tried usb to computer and directo to wall socket. help?

    phone 4 just turned itself off, won't turn on again - sleep/wake button hasn't worked for a while - tried charging (even though it was 50% charged when it shut down) and that makes no difference....either via usb to computer and direct to wall socket. Any suggestions...other than heading off to the genius bar tomorrow?

    Well, the sleep/wake button is also the power button. If you cannot use it to turn on, then you cannot use it to perform a reset by holding it and the home button together until you see the Apple logo.Those are the only two ways to turn the device on. You can try letting the battery go completely dead and then trying to plug it in. After it has charged for 20-30 minutes, the device may come back on. But, without the sleep/wake button, there is no other way to turn the device on or off.

  • I have a late 2008 iMac with dual intels and the fans won't come on anymore.  About every 1 1/2 hours, it automatically shuts down to cool off.  Is there any way to manually turn it on?  Or, do they have to be replaced?

    About every 1 1/2 hours, it automatically shuts down to cool off.  Is there any way to manually turn it on?  Or, do they have to be replaced?

    I tried that with no improvement.  I think I might have to have the fans replaced.  do you know if this is a particularly difficult procedure?  Something wierd that I've noticed is that if I have a video on for more than several minutes, the fans comes on, and also when I am on a Skype video conference for awhile.  Otherwise, the fan jst doen't come on as the intels heaten up to the point the the auto shut down kicks in...any advise?  This definitely interupts my work!  Thanks for your help and input thus far!

  • Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • My iphone 5 shut down and I am unable to turn it back on.  I've tried holding down the power button.  What should I do?

    My iphone 5 shut down and I am unable to turn it back on.  I've tried holding down the power button.  What should I do?

    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Ipad will just shut down and not power back on until it is plugged in

    Ipad will just shut down and will not reboot until it is plugged in. Any suggestions??

    I'm going to guess that your battery isnt just dead?
    Have you tried a reset? Hold down the sleep and home keys, past when you see the red power down slider  and until you see the silver apple. Let it reboot and see if that helps.
    If it won't hold a charge, make an appointment at your local apple store and have them take a look at it.

  • HT1414 after installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?

    After installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?

    Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

  • My Macbook Pro just randomly shuts down and I have to plug it into power to be able to turn it back on. Anybody got any suggestions?

    My Macbook Pro just randomly shuts down and I have to plug it into power to be able to turn it back on. Anybody got any suggestions?

    Troubleshooting: My computer won't turn on
    Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
    Resetting the SMC on portables with a battery you should not remove on your own
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.

  • My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?

    My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?

    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Screen icons become very large and wont reset. restarting is very difficult as slider is off screen. eventually shutting down and restaring gets screen back to normal .however this is happening more often

    my iphone 4s icons suddenly magnify on screen. 2 or 3 fill the screen. shutting down and restating fixes the problem as icons are back to normal size. however shutting down is very difficult as red slider is off screen and this is happenong more often. any cures?

    Take a look at this link, http://support.apple.com/kb/ts3129

Maybe you are looking for

  • Migration from WLSM to WiSM

    does anyone have a link or any reading material for migration from WLSM to WiSM. Also quick questions for all the expert or any body thats done this before. 1. Is it safe to install both the WiSM and also the WLSM in the save chasis during migration?

  • HT3678 Problem upgrading to Quicktime Pro

    I am running Mac OSX 10.7.5 and have both Quicktime 10.1 and Quicktime 7.6.6. I have paid for the upgrade to Quicktime Pro (to upgrade Quicktime 7.6.6 and have followed the directions (multiple times) and cannot seem to get the upgrade to kick in. I'

  • CMS moves to production

    Hi, We are using the CMS for our landscape ( XI 3.0) from some time, DEV to QA transports are moved with out any problem but i am facing the below problem when i move few transports from quality to production. In the Assembly tab i am selecting the p

  • Session problem: req.getSession(false) always attempt set a session cookie.

    I am having a problem with getSession(false) method. For some reasone           when I do this:           doGet(.....){           HttpSession tmpsession = req.getSession(false);           RequestDispatcher dpatch =           this.getServletContext().

  • Udev Rules for Monitors

    So I've got a bit of a fluid monitor setup.  Three different screens with three different configurations that are switched among rather often.  I wrote a script using xrandr to handle this, and it works very well when it gets called.  I thought it wo